ehci: disable LPM and PPCD for nVidia MCP89 chips
Subsystems (2)
PATCH 1/1 ehci: disable LPM and PPCD for nVidia MCP89 chips
From: Brian Tarricone <[email protected]>
Tested on MacBookAir3,1. Without this, we get EPROTO errors when fetching device config descriptors.
Signed-off-by Brian Tarricone <[email protected]>
Reported-by Benoit Gschwind <[email protected]>
Tested-by Edgar Hucek <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
--- drivers/usb/host/ehci-pci.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)
drivers/usb/host/ehci-pci.c +12 -0
@@ -148,6 +148,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)if (pdev->revision <0xa4 ) ehci->no_selective_suspend =1 ;break ; + +/* MCP89 chips on the MacBookAir3,1 give EPROTO when +* fetching device descriptors unless LPM is disabled. +* There are also intermittent problems enumerating +* devices with PPCD enabled. +*/ +case 0x0d9d : +ehci_info (ehci,"disable lpm/ppcd for nvidia mcp89" ); + ehci->has_lpm =0 ; + ehci->has_ppcd =0 ; + ehci->command &= ~(CMD_PPCEE ); +break ; }break ;case PCI_VENDOR_ID_VIA :
Signature · 1 line
1.7.2.2