Kbuild: kconfig: Verbose version of --listnewconfig
PATCH 1/1 Kbuild: kconfig: Verbose version of --listnewconfig
If the KBUILD_VERBOSE environment variable is set to non-zero, show the default values of new symbols and not just their names.
Based on work by Bastian Blank <[email protected]> and maximilian attems <[email protected]>.
--- scripts/kconfig/conf.c | 90 +++++++++++++++++++++++++++++++++++++++----- scripts/kconfig/confdata.c | 1 + scripts/kconfig/expr.h | 2 + 3 files changed, 83 insertions(+), 10 deletions(-)
scripts/kconfig/conf.c +80 -10
@@ -363,7 +363,6 @@ static void conf(struct menu *menu)switch (prop->type) {case P_MENU :if ((input_mode == silentoldconfig || - input_mode == listnewconfig || input_mode == oldnoconfig) && rootEntry != menu) {check_conf (menu);
@@ -423,11 +422,7 @@ static void check_conf(struct menu *menu)if (sym && !sym_has_value (sym)) {if (sym_is_changable (sym) || (sym_is_choice (sym) &&sym_get_tristate_value (sym) == yes)) { -if (input_mode == listnewconfig) { -if (sym->name && !sym_is_choice_value (sym)) { -printf ("%s%s\n" ,CONFIG_ , sym->name); - } - }else if (input_mode != oldnoconfig) { +if (input_mode != oldnoconfig) {if (!conf_cnt++)printf (_ ("*\n* Restart config...\n*\n" )); rootEntry =menu_get_parent_menu (menu);
@@ -440,6 +435,78 @@ static void check_conf(struct menu *menu)check_conf (child); } +static void report_conf (struct menu *menu,bool verbose) +{ +struct symbol *sym; +struct menu *child; +int l; +const char *str; + +if (!menu_is_visible (menu)) +return ; + +if (verbose && menu == &rootmenu) { +printf ("\n#\n" +"# Changes:\n" +"#\n" ); + } + + sym = menu->sym; +if (sym && (sym->flags &SYMBOL_NEW ) && +sym_is_changable (sym) && sym->name && !sym_is_choice_value (sym)) { +if (verbose) { +switch (sym->type) { +case S_BOOLEAN : +case S_TRISTATE : +switch (sym_get_tristate_value (sym)) { +case no: +printf ("# CONFIG_%s is not set\n" , sym->name); +break ; +case mod: +printf ("CONFIG_%s=m\n" , sym->name); +break ; +case yes: +printf ("CONFIG_%s=y\n" , sym->name); +break ; + } +break ; +case S_STRING : + str =sym_get_string_value (sym); +printf ("CONFIG_%s=\"" , sym->name); +while (1 ) { + l =strcspn (str,"\"\\" ); +if (l) { +fwrite (str, l,1 , stdout); + str += l; + } +if (!*str) +break ; +printf ("\\%c" , *str++); + } +fputs ("\"\n" , stdout); +break ; +case S_HEX : + str =sym_get_string_value (sym); +if (str[0 ] !='0' || (str[1 ] !='x' && str[1 ] !='X' )) { +printf ("CONFIG_%s=%s\n" , sym->name, str); +break ; + } +case S_INT : + str =sym_get_string_value (sym); +printf ("CONFIG_%s=%s\n" , sym->name, str); +break ; +default : +break ; + } + }else { +printf ("CONFIG_%s\n" , sym->name); + } + } + +for (child = menu->list; child; child = child->next) +report_conf (child, verbose); +} +static struct option long_opts[] = { {"oldaskconfig" , no_argument,NULL , oldaskconfig}, {"oldconfig" , no_argument,NULL , oldconfig},
@@ -460,6 +527,7 @@ int main(int ac, char **av) {int opt;const char *name; +const char *value;struct stat tmpstat;setlocale (LC_ALL ,"" );
@@ -604,16 +672,18 @@ int main(int ac, char **av) input_mode = silentoldconfig;/* fall through */ case oldconfig: -case listnewconfig:case oldnoconfig:case silentoldconfig:/* Update until a loop caused no more changes */ do { conf_cnt =0 ;check_conf (&rootmenu); - }while (conf_cnt && - (input_mode != listnewconfig && - input_mode != oldnoconfig)); + }while (conf_cnt && input_mode != oldnoconfig); +break ; +case listnewconfig: +conf_set_all_new_symbols (def_default); + value =getenv ("KBUILD_VERBOSE" ); +report_conf (&rootmenu, value &&atoi (value));break ; }
scripts/kconfig/confdata.c +1 -0
@@ -1009,6 +1009,7 @@ void conf_set_all_new_symbols(enum conf_def_mode mode) for_all_symbols(i, sym) {if (sym_has_value (sym))continue ; + sym->flags |=SYMBOL_NEW ;switch (sym_get_type (sym)) {case S_BOOLEAN :case S_TRISTATE :
scripts/kconfig/expr.h +2 -0
@@ -108,6 +108,8 @@ struct symbol {#define SYMBOL_DEF3 0x40000/* symbol.def[S_DEF_3] is valid */ #define SYMBOL_DEF4 0x80000/* symbol.def[S_DEF_4] is valid */ +#define SYMBOL_NEW 0x100000/* symbol is new (loaded config did not provide a value) */ +#define SYMBOL_MAXLENGTH 256#define SYMBOL_HASHSIZE 9973
Signature · 1 line
1.7.2.3
Quoted 60 lines · Ben Hutchings
If the
KBUILD_VERBOSEenvironment variable is set to non-zero, show the default values of new symbols and not just their names.Based on work by Bastian Blank <[email protected]> and maximilian attems <[email protected]>.
Signed-off-by Ben Hutchings <[email protected]>--- scripts/kconfig/conf.c | 90 +++++++++++++++++++++++++++++++++++++++----- scripts/kconfig/confdata.c | 1 + scripts/kconfig/expr.h | 2 + 3 files changed, 83 insertions(+), 10 deletions(-)scripts/kconfig/conf.c +19
-6@@ -363,7 +363,6 @@ static void conf(struct menu *menu)switch (prop->type) {case P_MENU :if ((input_mode == silentoldconfig || - input_mode == listnewconfig || input_mode == oldnoconfig) && rootEntry != menu) {check_conf (menu);@@ -423,11 +422,7 @@ static void check_conf(struct menu *menu)if (sym && !sym_has_value (sym)) {if (sym_is_changable (sym) || (sym_is_choice (sym) &&sym_get_tristate_value (sym) == yes)) { -if (input_mode == listnewconfig) { -if (sym->name && !sym_is_choice_value (sym)) { -printf ("%s%s\n" ,CONFIG_ , sym->name); - } - }else if (input_mode != oldnoconfig) { +if (input_mode != oldnoconfig) {if (!conf_cnt++)printf (_ ("*\n* Restart config...\n*\n" )); rootEntry =menu_get_parent_menu (menu);@@ -440,6 +435,78 @@ static void check_conf(struct menu *menu)check_conf (child); } +static void report_conf (struct menu *menu,bool verbose) +{ +struct symbol *sym; +struct menu *child; +int l; +const char *str; + +if (!menu_is_visible (menu)) +return ; + +if (verbose && menu == &rootmenu) { +printf ("\n#\n" +"# Changes:\n" +"#\n" ); + } + + sym = menu->sym; + if (sym && (sym->flags & SYMBOL_NEW) &&
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 464
Quoted 10 lines
scripts/kconfig/conf.c +9
-0+ sym_is_changable(sym) && sym->name && !sym_is_choice_value(sym)) { +if (verbose) { +switch (sym->type) { +case S_BOOLEAN : +case S_TRISTATE : +switch (sym_get_tristate_value (sym)) { +case no: +printf ("# CONFIG_%s is not set\n" , sym->name); +break ;
Hi,
this is almost a 1:1 copy of the conf_write_symbol() function, so what about reusing it like this? Otherwise the patch looks OK.
Michal
Subject: [PATCH] kconfig: Use conf_write_symbol() in listnewconfig
scripts/kconfig/conf.c +1 -45
@@ -439,8 +439,6 @@ static void report_conf(struct menu *menu, bool verbose) {struct symbol *sym;struct menu *child; -int l; -const char *str;if (!menu_is_visible (menu))return ;
@@ -455,49 +453,7 @@ static void report_conf(struct menu *menu, bool verbose)if (sym && (sym->flags &SYMBOL_NEW ) &&sym_is_changable (sym) && sym->name && !sym_is_choice_value (sym)) {if (verbose) { -switch (sym->type) { -case S_BOOLEAN : -case S_TRISTATE : -switch (sym_get_tristate_value (sym)) { -case no: -printf ("# CONFIG_%s is not set\n" , sym->name); -break ; -case mod: -printf ("CONFIG_%s=m\n" , sym->name); -break ; -case yes: -printf ("CONFIG_%s=y\n" , sym->name); -break ; - } -break ; -case S_STRING : - str =sym_get_string_value (sym); -printf ("CONFIG_%s=\"" , sym->name); -while (1 ) { - l =strcspn (str,"\"\\" ); -if (l) { -fwrite (str, l,1 , stdout); - str += l; - } -if (!*str) -break ; -printf ("\\%c" , *str++); - } -fputs ("\"\n" , stdout); -break ; -case S_HEX : - str =sym_get_string_value (sym); -if (str[0 ] !='0' || (str[1 ] !='x' && str[1 ] !='X' )) { -printf ("CONFIG_%s=%s\n" , sym->name, str); -break ; - } -case S_INT : - str =sym_get_string_value (sym); -printf ("CONFIG_%s=%s\n" , sym->name, str); -break ; -default : -break ; - } +conf_write_symbol (sym, sym->type, stdout, true); }else {printf ("CONFIG_%s\n" , sym->name); }
scripts/kconfig/confdata.c +1 -1
@@ -440,7 +440,7 @@ static void conf_write_string(bool headerfile, const char *name,fputs ("\"\n" , out); } -static void conf_write_symbol (struct symbol *sym,enum symbol_type type, +void conf_write_symbol (struct symbol *sym,enum symbol_type type,FILE *out,bool write_no) {const char *str;
scripts/kconfig/lkc_proto.h +1 -0
@@ -7,6 +7,7 @@ P(conf_read_simple,int,(const char *name, int)); P(conf_write_defconfig,int,(const char *name)); P(conf_write,int,(const char *name)); P(conf_write_autoconf,int,(void)); +P(conf_write_symbol, void,(struct symbol*, enum symbol_type, FILE*, bool)); P(conf_get_changed,bool,(void)); P(conf_set_changed_callback, void,(void (*fn)(void))); P(conf_set_message_callback, void,(void (*fn)(const char *fmt, va_list ap)));
PATCH v2 1/1 Kbuild: kconfig: Verbose version of --listnewconfig
If the KBUILD_VERBOSE environment variable is set to non-zero, show the default values of new symbols and not just their names.
Based on work by Bastian Blank <[email protected]> and maximilian attems <[email protected]>. Simplified by Michal Marek <[email protected]>.
---
On Fri, 2010-12-03 at 13:23 +0100, Michal Marek wrote:
[...]
Quoted 2 lines
this is almost a 1:1 copy of the
conf_write_symbol()function, so what about reusing it like this? Otherwise the patch looks OK.
[...]
Well spotted - I assume that function didn't exist when this code was first added in Debian, but it does seem to be exactly equivalent. I've incorporated your change into this version.
Ben.
scripts/kconfig/conf.c | 45 +++++++++++++++++++++++++++++++++--------- scripts/kconfig/confdata.c | 5 ++- scripts/kconfig/expr.h | 2 + scripts/kconfig/lkc_proto.h | 1 + 4 files changed, 41 insertions(+), 12 deletions(-)
scripts/kconfig/conf.c +35 -10
@@ -363,7 +363,6 @@ static void conf(struct menu *menu)switch (prop->type) {case P_MENU :if ((input_mode == silentoldconfig || - input_mode == listnewconfig || input_mode == oldnoconfig) && rootEntry != menu) {check_conf (menu);
@@ -423,11 +422,7 @@ static void check_conf(struct menu *menu)if (sym && !sym_has_value (sym)) {if (sym_is_changable (sym) || (sym_is_choice (sym) &&sym_get_tristate_value (sym) == yes)) { -if (input_mode == listnewconfig) { -if (sym->name && !sym_is_choice_value (sym)) { -printf ("%s%s\n" ,CONFIG_ , sym->name); - } - }else if (input_mode != oldnoconfig) { +if (input_mode != oldnoconfig) {if (!conf_cnt++)printf (_ ("*\n* Restart config...\n*\n" )); rootEntry =menu_get_parent_menu (menu);
@@ -440,6 +435,33 @@ static void check_conf(struct menu *menu)check_conf (child); } +static void report_conf (struct menu *menu,bool verbose) +{ +struct symbol *sym; +struct menu *child; + +if (!menu_is_visible (menu)) +return ; + +if (verbose && menu == &rootmenu) { +printf ("\n#\n" +"# Changes:\n" +"#\n" ); + } + + sym = menu->sym; +if (sym && (sym->flags &SYMBOL_NEW ) && +sym_is_changable (sym) && sym->name && !sym_is_choice_value (sym)) { +if (verbose) +conf_write_symbol (sym, sym->type, stdout, true); +else +printf ("CONFIG_%s\n" , sym->name); + } + +for (child = menu->list; child; child = child->next) +report_conf (child, verbose); +} +static struct option long_opts[] = { {"oldaskconfig" , no_argument,NULL , oldaskconfig}, {"oldconfig" , no_argument,NULL , oldconfig},
@@ -460,6 +482,7 @@ int main(int ac, char **av) {int opt;const char *name; +const char *value;struct stat tmpstat;setlocale (LC_ALL ,"" );
@@ -604,16 +627,18 @@ int main(int ac, char **av) input_mode = silentoldconfig;/* fall through */ case oldconfig: -case listnewconfig:case oldnoconfig:case silentoldconfig:/* Update until a loop caused no more changes */ do { conf_cnt =0 ;check_conf (&rootmenu); - }while (conf_cnt && - (input_mode != listnewconfig && - input_mode != oldnoconfig)); + }while (conf_cnt && input_mode != oldnoconfig); +break ; +case listnewconfig: +conf_set_all_new_symbols (def_default); + value =getenv ("KBUILD_VERBOSE" ); +report_conf (&rootmenu, value &&atoi (value));break ; }
scripts/kconfig/confdata.c +3 -2
@@ -440,8 +440,8 @@ static void conf_write_string(bool headerfile, const char *name,fputs ("\"\n" , out); } -static void conf_write_symbol (struct symbol *sym,enum symbol_type type, -FILE *out,bool write_no) +void conf_write_symbol (struct symbol *sym,enum symbol_type type, +FILE *out,bool write_no) {const char *str;
@@ -1009,6 +1009,7 @@ void conf_set_all_new_symbols(enum conf_def_mode mode) for_all_symbols(i, sym) {if (sym_has_value (sym))continue ; + sym->flags |=SYMBOL_NEW ;switch (sym_get_type (sym)) {case S_BOOLEAN :case S_TRISTATE :
scripts/kconfig/expr.h +2 -0
@@ -108,6 +108,8 @@ struct symbol {#define SYMBOL_DEF3 0x40000/* symbol.def[S_DEF_3] is valid */ #define SYMBOL_DEF4 0x80000/* symbol.def[S_DEF_4] is valid */ +#define SYMBOL_NEW 0x100000/* symbol is new (loaded config did not provide a value) */ +#define SYMBOL_MAXLENGTH 256#define SYMBOL_HASHSIZE 9973
scripts/kconfig/lkc_proto.h +1 -0
@@ -7,6 +7,7 @@ P(conf_read_simple,int,(const char *name, int)); P(conf_write_defconfig,int,(const char *name)); P(conf_write,int,(const char *name)); P(conf_write_autoconf,int,(void)); +P(conf_write_symbol, void,(struct symbol*, enum symbol_type, FILE*, bool)); P(conf_get_changed,bool,(void)); P(conf_set_changed_callback, void,(void (*fn)(void))); P(conf_set_message_callback, void,(void (*fn)(const char *fmt, va_list ap)));
Signature · 7 lines
1.7.2.3 -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.
Hi,
Quoted 60 lines · Ben Hutchings
If the
KBUILD_VERBOSEenvironment variable is set to non-zero, show the default values of new symbols and not just their names.Based on work by Bastian Blank <[email protected]> and maximilian attems <[email protected]>. Simplified by Michal Marek <[email protected]>.
Signed-off-by Ben Hutchings <[email protected]>---
On Fri, 2010-12-03 at 13:23 +0100, Michal Marek wrote:
[...]Quoted 2 lines
this is almost a 1:1 copy of the
conf_write_symbol()function, so what about reusing it like this? Otherwise the patch looks OK.[...]
Well spotted - I assume that function didn't exist when this code was first added in Debian, but it does seem to be exactly equivalent. I've incorporated your change into this version.
Ben.
scripts/kconfig/conf.c | 45 +++++++++++++++++++++++++++++++++---------
scripts/kconfig/confdata.c| 5 ++-
scripts/kconfig/expr.h | 2 +
scripts/kconfig/lkc_proto.h | 1 +4 files changed, 41 insertions(+), 12 deletions(-)scripts/kconfig/conf.c +0
-0@@ -363,7 +363,6 @@ static void conf(struct menu *menu) switch (prop->type) {case
P_MENU:
if ((input_mode== silentoldconfig ||
- input_mode == listnewconfig ||input_mode== oldnoconfig) && rootEntry != menu) {check_conf(menu);scripts/kconfig/conf.c +0
-0@@ -423,11 +422,7 @@ static void check_conf(struct menu *menu) if (sym && !sym_has_value(sym)) {if (
sym_is_changable(sym)||
(sym_is_choice(sym) &&sym_get_tristate_value(sym)== yes)) {
- if (input_mode== listnewconfig) {
- if (sym->name&& !sym_is_choice_value(sym)) {
-printf("%s%s\n", CONFIG_, sym->name);
- }
- } else if (input_mode!= oldnoconfig) {
+ if (input_mode!= oldnoconfig) {
if (!conf_cnt++)
printf(_("*\n* Restart config...\n*\n")); rootEntry =menu_get_parent_menu(menu);scripts/kconfig/conf.c +4
-0@@ -440,6 +435,33 @@ static void check_conf(struct menu *menu) check_conf(child); } +static void report_conf (struct menu *menu,bool verbose) +{ + struct symbol *sym; + struct menu *child;
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 451
Quoted 10 lines
scripts/kconfig/conf.c +10
-0+ + if (!menu_is_visible(menu)) + return; + + if (verbose && menu == &rootmenu) { + printf("\n#\n" + "# Changes:\n" + "#\n"); + } +
I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 458
Quoted 7 lines
scripts/kconfig/conf.c +7
-0+ sym = menu->sym; + if (sym && (sym->flags & SYMBOL_NEW) && + sym_is_changable(sym) && sym->name && !sym_is_choice_value(sym)) { + if (verbose) + conf_write_symbol(sym, sym->type, stdout, true); + else + printf("CONFIG_%s\n", sym->name);
Please don't hardcode the prefix string. This should be:
printf("%s%s\n", CONFIG_, sym->name);- Arnaud
On Sat, 2010-12-04 at 13:11 -0500, Arnaud Lacombe wrote:
[...]
Quoted 9 lines
Quoted 9 lines
scripts/kconfig/conf.c +9
-0+static void report_conf (struct menu *menu,bool verbose) +{ +struct symbol *sym; +struct menu *child; + +if (!menu_is_visible (menu)) +return ; + +if (verbose && menu == &rootmenu) {
Quoted 8 lines
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 451
Quoted 5 lines
scripts/kconfig/conf.c +5
-0+printf ("\n#\n" +"# Changes:\n" +"#\n" ); + } +I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
We use this feature (or an earlier version of it) in automated kernel builds in Debian, so we expect the output to appear in build logs and the header makes it easier to pick out.
Quoted 10 lines
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 458
Quoted 7 lines
scripts/kconfig/conf.c +7
-0+ sym = menu->sym; +if (sym && (sym->flags &SYMBOL_NEW ) && +sym_is_changable (sym) && sym->name && !sym_is_choice_value (sym)) { +if (verbose) +conf_write_symbol (sym, sym->type, stdout, true); +else +printf ("CONFIG_%s\n" , sym->name);Please don't hardcode the prefix string. This should be:
printf("%s%s\n", CONFIG_, sym->name);
OK, but I don't understand why it would change.
Ben.
Signature · 2 lines
Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.
Hi,
Quoted 8 lines · Ben Hutchings
[...]
Quoted 7 lines
Quoted 7 lines
+ sym =
menu->sym;
+ if (sym && (sym->flags&SYMBOL_NEW) &&
+sym_is_changable(sym)&&sym->name&& !sym_is_choice_value(sym)) {
+ if (verbose)
+conf_write_symbol(sym, sym->type, stdout, true);
+ else
+printf("CONFIG_%s\n", sym->name);
Quoted 6 lines
Quoted 3 lines
Please don't hardcode the prefix string. This should be:
printf("%s%s\n",
CONFIG_,sym->name);OK, but I don't understand why it would change.
the Linux kernel is not the only user of kconfig.
- Arnaud
Hi,
Quoted 16 lines · Ben Hutchings
On Sat, 2010-12-04 at 13:11 -0500, Arnaud Lacombe wrote:
[...]Quoted 6 lines
Quoted 6 lines
scripts/kconfig/conf.c +6
-0+static void report_conf (struct menu *menu,bool verbose) +{ + struct symbol *sym; + struct menu *child; + + if (!menu_is_visible(menu))Quoted 8 lines
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 451
Quoted 8 lines
+ return;
scripts/kconfig/conf.c +7
-0+ + if (verbose && menu == &rootmenu) { + printf("\n#\n" + "# Changes:\n" + "#\n"); + } +
FWIW, some more nits about this header:
- I'd rather either always or never see it, not depending on whether
or not KBUILD_VERBOSE is set to non-zero.
- The "menu == &rootmenu" test is pretty useless, just move the
display (if any) outside of report_conf(), where there is no ambiguity.
- And why do you need a leading newline in front of the header (ie.
the "\n#\n") ? The only places where this construct is used in conf is when there is a need to highlight the message, which should not be needed here.
Quoted 8 lines
Quoted 3 lines
I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
We use this feature (or an earlier version of it) in automated kernel builds in Debian, so we expect the output to appear in build logs and the header makes it easier to pick out.
That's easily doable outside kconfig.
- Arnaud
Quoted 14 lines · Arnaud Lacombe
Hi,
Quoted 11 lines · Ben Hutchings
On Sat, 2010-12-04 at 13:11 -0500, Arnaud Lacombe wrote:
[...]Quoted 9 lines
Quoted 9 lines
scripts/kconfig/conf.c +9
-0+static void report_conf (struct menu *menu,bool verbose) +{ +struct symbol *sym; +struct menu *child; + +if (!menu_is_visible (menu)) +return ; + +if (verbose && menu == &rootmenu) {
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 451
Quoted 5 lines
scripts/kconfig/conf.c +5
-0+printf ("\n#\n" +"# Changes:\n" +"#\n" ); + } +FWIW, some more nits about this header:
- I'd rather either always or never see it, not depending on whether
or notKBUILD_VERBOSEis set to non-zero.
The other users of listnewconfig obviously didn't want that.
Quoted 12 lines
- The "menu == &rootmenu" test is pretty useless, just move the
display (if any) outside ofreport_conf(), where there is no ambiguity.
- And why do you need a leading newline in front of the header (ie.
the "\n#\n") ? The only places where this construct is used in conf is when there is a need to highlight the message, which should not be needed here.Quoted 4 lines
Quoted 3 lines
I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
Quoted 5 lines
Quoted 4 lines
We use this feature (or an earlier version of it) in automated kernel builds in Debian, so we expect the output to appear in build logs and the header makes it easier to pick out.
That's easily doable outside kconfig.
No it isn't, as the Kconfig code must be built as part of the listnewconfig target. (Building just the code first will provoke warnings about the invalid config.)
Ben.
Signature · 2 lines
Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.
Hi,
On Sat, Dec 4, 2010 at 4:07 PM, Ben Hutchings <[email protected]> wrote:
[...]
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
We use this feature (or an earlier version of it) in automated kernel builds in Debian, so we expect the output to appear in build logs and the header makes it easier to pick out.
Quoted 6 lines
Quoted 1 line
That's easily doable outside kconfig.
No it isn't, as the
Kconfigcode must be built as part of the listnewconfig target. (Building just the code first will provoke warnings about the invalid config.)
echo "#"
echo "# Changes:"
echo "#"
make [...] listnewconfig
does the job, without introducing extra header others do not seem to want to see.
- Arnaud
Quoted 18 lines · Arnaud Lacombe
Hi,
On Sat, Dec 4, 2010 at 4:07 PM, Ben Hutchings <[email protected]> wrote:
[...]Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
We use this feature (or an earlier version of it) in automated kernel builds in Debian, so we expect the output to appear in build logs and the header makes it easier to pick out.
Quoted 6 lines
Quoted 1 line
That's easily doable outside kconfig.
No it isn't, as the
Kconfigcode must be built as part of the listnewconfig target. (Building just the code first will provoke warnings about the invalid config.)
Quoted 7 lines
echo "#"
echo "# Changes:"
echo "#"
make [...] listnewconfigdoes the job, without introducing extra header others do not seem to want to see.
Now try that with a clean tree and an outdated config file.
Ben.
Signature · 2 lines
Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.
Hi,
Quoted 24 lines · Ben Hutchings
Quoted 23 lines · Arnaud Lacombe
Hi,
On Sat, Dec 4, 2010 at 4:07 PM, Ben Hutchings <[email protected]> wrote:
[...]Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
We use this feature (or an earlier version of it) in automated kernel builds in Debian, so we expect the output to appear in build logs and the header makes it easier to pick out.
Quoted 6 lines
Quoted 1 line
That's easily doable outside kconfig.
No it isn't, as the
Kconfigcode must be built as part of the listnewconfig target. (Building just the code first will provoke warnings about the invalid config.)echo "#"
echo "# Changes:"
echo "#"
make [...] listnewconfig
Quoted 5 lines
Quoted 2 lines
does the job, without introducing extra header others do not seem to want to see.
Now try that with a clean tree and an outdated config file.
make -s listnewconfig
is perfectly silent[0]. Ok, I admit, I had to cheat, ie. I built kconfig with HOST_EXTRACFLAGS="-Wno-char-subscripts". You may also want to use `silentoldconfig' beforehand to tell you if the config needs adjustment or not, in which case, kconfig no longer has to be built.
Now, if by "warnings about the invalid config" you mean the illegal use of the "select" keyword, I'd say that these warnings should not happen in a release kernel, and time has better to be spent fixing them than putting some marker to skip them. Note that this task is up to the subsystem maintainer, in most case.
- Arnaud
[0]: on top of Linus' tree as of Nov. 5.
Quoted 31 lines · Ben Hutchings
On Sat, 2010-12-04 at 13:11 -0500, Arnaud Lacombe wrote:
[...]Quoted 9 lines
Quoted 9 lines
scripts/kconfig/conf.c +9
-0+static void report_conf (struct menu *menu,bool verbose) +{ +struct symbol *sym; +struct menu *child; + +if (!menu_is_visible (menu)) +return ; + +if (verbose && menu == &rootmenu) {Quoted 8 lines
scripts/kconfig/conf.c static void check_conf(struct menu *menu) · line 451
Quoted 5 lines
scripts/kconfig/conf.c +5
-0+printf ("\n#\n" +"# Changes:\n" +"#\n" ); + } +I would not expect to see any header if there is no new symbol(s). However, that might complicate the code too much. Btw, I find "Changes" to be misleading, is that header necessary ?
We use this feature (or an earlier version of it) in automated kernel builds in Debian, so we expect the output to appear in build logs and the header makes it easier to pick out.
Quoted 7 lines
Quoted 7 lines
scripts/kconfig/conf.c +7
-0+ sym = menu->sym; +if (sym && (sym->flags &SYMBOL_NEW ) && +sym_is_changable (sym) && sym->name && !sym_is_choice_value (sym)) { +if (verbose) +conf_write_symbol (sym, sym->type, stdout, true); +else +printf ("CONFIG_%s\n" , sym->name);
Quoted 5 lines
Quoted 3 lines
Please don't hardcode the prefix string. This should be:
printf("%s%s\n", CONFIG_, sym->name);OK, but I don't understand why it would change.
Other projects uses kconfig and they use other prefix.
Sam
Hi,
Quoted 3 lines · Ben Hutchings
If the
KBUILD_VERBOSEenvironment variable is set to non-zero, show the default values of new symbols and not just their names.
One more thing. This patch would be the first to introduce a KBUILD_ environment variable into kconfig. All the other environment variable used are prefixed with KCONFIG_. Maybe would it be better to introduce a KCONFIG_VERBOSE variable and link it to KBUILD_VERBOSE in kconfig's Makefile. That would also remove the need to atoi() its value.
- Arnaud
Hi,
[This message is a bit out-of-scope of this patch]
scripts/kconfig/expr.h struct symbol { · line 115
Quoted 13 lines · Ben Hutchings
scripts/kconfig/expr.h +2
-0@@ -108,6 +108,8 @@ struct symbol { #define SYMBOL_DEF3 0x40000 /* symbol.def[S_DEF_3] is valid */ #define SYMBOL_DEF4 0x80000 /* symbol.def[S_DEF_4] is valid */ +#define SYMBOL_NEW 0x100000/* symbol is new (loaded config did not provide a value) */ + #define SYMBOL_MAXLENGTH 256 #define SYMBOL_HASHSIZE 9973
Just for the record, as long as I like this explicit flag, it does only make sense for the S_DEF_USER case.
Kconfig seems to have been thought originally to support multiple state of the tree (through the S_DEF_* flags). However, there has been years after years more and more code written solely for the S_DEF_USER case. Nowadays, making useful use of these S_DEF_* flags has became pretty much impossible.
If the goal of this patch was just to provide a verbose --listnewconfig, that should have been doable within check_conf().
Just a side note, using conf_write symbol() has the disadvantage to print:
# CONFIG_FOO is not set
instead of
CONFIG_FOO=n
or
CONFIG_FOO is not set
I've never been a big fan of having the format included in a generic library. I guess the caller should specify a printer callback. That would avoid also the `headerfile' fuss of conf_write_string.
I'd suggest the printer callback to be of the form:
struct conf_printer_callback {
void (*print_set)(struct symbol *);
void (*print_unset)(struct symbol *);
void (*print_comment)(struct symbol *);
}that way, conf_write() and conf_write_autoconf() would also share more code...
- Arnaud, who had other plan for the day :/