suggested vhost link speed settings

Hi list,

Being that the virtio interfaces are stated as acheiving 5-8 Gb throughput now with vhost, as opposed to 1Gb without, how should their link speed be defined when the choices are 2500M or 10000M?

I have them plotted out to make a 10Gb bond out of a pair, counting on 5Gb max each, which I'm imagining can be acheived without concern based on what I read.

If I set them to 'auto-negotiate' will it internally flap between & cause undesirable consequences?
I don't want to set them at 2500 in case they ever do need to reach closer to 5 each.

I'm not at a point where I can test anything yet, I'm just planning & preconfiguring so far.

For the sake of preventing issues down the line I wanted to see if there's a consensus or standard for this scenario and be as sure as possible ahead of time.

Thanks,

-C

The reported link speed for _any_ virtual NIC has no meaning at all, except of the numbers somewhere in ifconfig or equivalent. The actual speed is always limited by the host CPU and the effectiveness of the implementation currently in use. So, it is merely a cosmetic thing, nothing more.

The only possible usage for this number (reported link speed) is to let some visualisation tools to draw their graphs, to show "link utilisation" percentage for example. But for that, there's no actual utilisation either - it depends on the current host CPU speed, - f.e. you put additional load to the CPU and the max speed will be lower, but your visualisator will report low utilization.

In short: don't try to visualize "link utilization", it has no meaning.

As of actual speeds, I can reach ~2Gbps on my somewhat-old-now 2.4GHz Phenom 9750 (first gen) even without vhost-net.

/mjt