ARMV7: OMAP4: twl6030 add battery charging support
PATCH 1/1 ARMV7: OMAP4: twl6030 add battery charging support
From: Balaji T K <[email protected]>
Add battery charging support twl6030 driver.
Add support for battery voltage and current measurements.
Add command to get battery status and start/stop battery charging from USB.
Signed-off-by Balaji T K <[email protected]>
Tested-by Steve Sakoman <[email protected]>
--- board/ti/sdp4430/Makefile | 2 +- board/ti/sdp4430/cmd_bat.c | 58 ++++++++++++++++++ board/ti/sdp4430/sdp.c | 4 + drivers/power/twl6030.c | 124 ++++++++++++++++++++++++++++++++++++++- include/configs/omap4_sdp4430.h | 1 + include/twl6030.h | 45 +++++++++++++- 6 files changed, 229 insertions(+), 5 deletions(-) create mode 100644 board/ti/sdp4430/cmd_bat.c
board/ti/sdp4430/Makefile +1 -1
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := sdp.o +COBJS := sdp.o cmd_bat.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
board/ti/sdp4430/cmd_bat.c new file +58 -0
58 lines not on this page · raw message
board/ti/sdp4430/sdp.c +4 -0
@@ -23,6 +23,7 @@* MA 02111-1307 USA */ #include <common.h> +#include <twl6030.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h>
@@ -63,6 +64,9 @@ int board_eth_init(bd_t *bis)*/ int misc_init_r (void ) { +#ifdef CONFIG_TWL6030_POWER +twl6030_init_battery_charging (); +#endif return 0 ; }
drivers/power/twl6030.c +122 -2
145 lines not on this page · raw message
include/configs/omap4_sdp4430.h +1 -0
@@ -102,6 +102,7 @@/* TWL6030 */ #define CONFIG_TWL6030_POWER 1 +#define CONFIG_CMD_BAT 1/* MMC */ #define CONFIG_GENERIC_MMC 1
include/twl6030.h +43 -2
65 lines not on this page · raw message
Signature · 1 line
1.7.0.4