Skip to contentSkip to conversation

regulator: Convert WM8994 to use get_voltage_sel()

PATCH Applied Mark Brown 2 participants 2 messages Dec 13, 2010 – Dec 16, 2010

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 regulator: Convert WM8994 to use get_voltage_sel()

---
 drivers/regulator/wm8994-regulator.c |   16 ++++++----------
 1 files changed, 6 insertions(+), 10 deletions(-)
drivers/regulator/wm8994-regulator.c +6 -10
index 1b162e6..594f88e 100644
@@ -86,7 +86,7 @@ static int wm8994_ldo1_list_voltage(struct regulator_dev *rdev,
 	return (selector * 100000) + 2400000;
 }
 
-static int wm8994_ldo1_get_voltage(struct regulator_dev *rdev)
+static int wm8994_ldo1_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
 	int val;
@@ -95,9 +95,7 @@ static int wm8994_ldo1_get_voltage(struct regulator_dev *rdev)
 	if (val < 0)
 		return val;
 
-	val = (val & WM8994_LDO1_VSEL_MASK) >> WM8994_LDO1_VSEL_SHIFT;
-
-	return wm8994_ldo1_list_voltage(rdev, val);
+	return (val & WM8994_LDO1_VSEL_MASK) >> WM8994_LDO1_VSEL_SHIFT;
 }
 
 static int wm8994_ldo1_set_voltage(struct regulator_dev *rdev,
@@ -125,7 +123,7 @@ static struct regulator_ops wm8994_ldo1_ops = {
 	.enable_time = wm8994_ldo_enable_time,
 
 	.list_voltage = wm8994_ldo1_list_voltage,
-	.get_voltage = wm8994_ldo1_get_voltage,
+	.get_voltage_sel = wm8994_ldo1_get_voltage_sel,
 	.set_voltage = wm8994_ldo1_set_voltage,
 };
 
@@ -138,7 +136,7 @@ static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
 	return (selector * 100000) + 900000;
 }
 
-static int wm8994_ldo2_get_voltage(struct regulator_dev *rdev)
+static int wm8994_ldo2_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
 	int val;
@@ -147,9 +145,7 @@ static int wm8994_ldo2_get_voltage(struct regulator_dev *rdev)
 	if (val < 0)
 		return val;
 
-	val = (val & WM8994_LDO2_VSEL_MASK) >> WM8994_LDO2_VSEL_SHIFT;
-
-	return wm8994_ldo2_list_voltage(rdev, val);
+	return (val & WM8994_LDO2_VSEL_MASK) >> WM8994_LDO2_VSEL_SHIFT;
 }
 
 static int wm8994_ldo2_set_voltage(struct regulator_dev *rdev,
@@ -177,7 +173,7 @@ static struct regulator_ops wm8994_ldo2_ops = {
 	.enable_time = wm8994_ldo_enable_time,
 
 	.list_voltage = wm8994_ldo2_list_voltage,
-	.get_voltage = wm8994_ldo2_get_voltage,
+	.get_voltage_sel = wm8994_ldo2_get_voltage_sel,
 	.set_voltage = wm8994_ldo2_set_voltage,
 };
 
Signature · 1 line
1.7.1
#1 lore raw
Quoted 5 lines · Mark Brown
---
 drivers/regulator/wm8994-regulator.c |   16 ++++++----------
 1 files changed, 6 insertions(+), 10 deletions(-)

Applied.

Thanks

Liam

Signature · 3 lines
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk