Introduce CLOCK_BOOTTIME
Subsystems (2)
cover Introduce CLOCK_BOOTTIME
After some discussions with Jamie Lokier about some of the drawbacks of CLOCK_MONOTONIC not incrementing during suspend (see http://www.spinics.net/lists/linux-fsdevel/msg40272.html),
I wanted to see if we couldn't provide a new clockid that would allow applications that wanted to be aware of time passing during suspend without having to deal with the inconsistencies of CLOCK_REALTIME caused by calls to settimeofday.
So this patchset introduces CLOCK_BOOTTIME, which is identical to CLOCK_MONOTONIC, but includes any time spent in suspend.
This is just my initial stab at this, so I'd appreciate any comments or thougths on these patches.
Jamie: On platforms that don't implement read_persistent_clock, your issue would still be present, but fixing that is on my list. Other then that issue, does this seem to address your concern?
Thomas: Let me know if the hrtimer_base indirection is too gross. It just seemed silly to create 5 empty bases so we could have an exact match between the clockids and the bases.
Arve: I believe CLOCK_BOOTTIME would be sufficient for what Android is using as elapsedRealtime() or ANDROID_ALARM_ELAPSED_REALTIME. If not please let me know why.
thanks
-john
John Stultz (2):
hrtimers: extend hrtimer base code to handle more then 2 clockids
hrtimers: Add CLOCK_BOOTTIME clockid, hrtimerbase and posix interface
include/linux/hrtimer.h | 22 ++++++++++++- include/linux/time.h | 4 ++ kernel/hrtimer.c | 44 ++++++++++++++++--------- kernel/posix-timers.c | 16 ++++++++- kernel/time/timekeeping.c | 79 ++++++++++++++++++++++++++++++++++++++++++++- 5 files changed, 146 insertions(+), 19 deletions(-)
Signature · 1 line
1.7.3.2.146.gca209
PATCH 1/2 hrtimers: extend hrtimer base code to handle more then 2 clockids
The hrtimer code is written mainly with CLOCK_REALTIME and CLOCK_MONOTONIC in mind. These are clockids 0 and 1 resepctively. However, if we are to introduce any new hrtimer bases, using new clockids, we have to skip the cputimers (clockids 2,3) as well as other clockids that may not impelement timers.
This patch adds a little bit of indirection between the clockid and the base, so that we can extend the base by one when we add a new clockid at number 7 or so.
--- include/linux/hrtimer.h | 18 +++++++++++++++++- kernel/hrtimer.c | 30 ++++++++++++++++-------------- 2 files changed, 33 insertions(+), 15 deletions(-)
include/linux/hrtimer.h +17 -1
@@ -149,7 +149,23 @@ struct hrtimer_clock_base {#endif }; -#define HRTIMER_MAX_CLOCK_BASES 2 +enum hrtimer_base_type { +HRTIMER_BASE_REALTIME , +HRTIMER_BASE_MONOTONIC , +HRTIMER_MAX_CLOCK_BASES , +}; + +static inline int hrtimer_clockid_to_base (clockid_t clock_id) +{ +switch (clock_id) { +case CLOCK_REALTIME : +return HRTIMER_BASE_REALTIME ; +case CLOCK_MONOTONIC : +return HRTIMER_BASE_MONOTONIC ; + } +WARN_ON (1 );/* Unknown clock_id */ +return 0 ; +}/* * struct hrtimer_cpu_base - the per cpu clock bases
kernel/hrtimer.c +16 -14
@@ -53,11 +53,10 @@/* * The timer bases: * -* Note: If we want to add new timer bases, we have to skip the two -* clock ids captured by the cpu-timers. We do this by holding empty -* entries rather than doing math adjustment of the clock ids. -* This ensures that we capture erroneous accesses to these clock ids -* rather than moving them into the range of valid clock id's. +* There are more clockids then hrtimer bases. Thus, we index +* into the timer bases by the hrtimer_base_type enum. When trying +* to reach a base using a clockid, hrtimer_clockid_to_base() +* is used to convert from clockid to the proper hrtimer_base_type. */ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = {
@@ -95,8 +94,8 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base) xtim =timespec_to_ktime (xts); tomono =timespec_to_ktime (tom); - base->clock_base[CLOCK_REALTIME ].softirq_time = xtim; - base->clock_base[CLOCK_MONOTONIC ].softirq_time = + base->clock_base[HRTIMER_BASE_REALTIME ].softirq_time = xtim; + base->clock_base[HRTIMER_BASE_MONOTONIC ].softirq_time =ktime_add (xtim, tomono); }
@@ -184,10 +183,11 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,struct hrtimer_cpu_base *new_cpu_base;int this_cpu =smp_processor_id ();int cpu =hrtimer_get_target (this_cpu, pinned); +int basenum =hrtimer_clockid_to_base (base->index); again: new_cpu_base = &per_cpu (hrtimer_bases, cpu); - new_base = &new_cpu_base->clock_base[base->index]; + new_base = &new_cpu_base->clock_base[basenum];if (base != new_base) {/*
@@ -627,7 +627,7 @@ static void retrigger_next_event(void *arg)/* Adjust CLOCK_REALTIME offset */ raw_spin_lock (&base->lock); - base->clock_base[CLOCK_REALTIME ].offset = + base->clock_base[HRTIMER_BASE_REALTIME ].offset =timespec_to_ktime (realtime_offset);hrtimer_force_reprogram (base,0 );
@@ -725,8 +725,8 @@ static int hrtimer_switch_to_hres(void)return 0 ; } base->hres_active =1 ; - base->clock_base[CLOCK_REALTIME ].resolution =KTIME_HIGH_RES ; - base->clock_base[CLOCK_MONOTONIC ].resolution =KTIME_HIGH_RES ; + base->clock_base[HRTIMER_BASE_REALTIME ].resolution =KTIME_HIGH_RES ; + base->clock_base[HRTIMER_BASE_MONOTONIC ].resolution =KTIME_HIGH_RES ;tick_setup_sched_timer ();
@@ -1116,7 +1116,7 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, enum hrtimer_mode mode) {struct hrtimer_cpu_base *cpu_base; - +int base;memset (timer,0 ,sizeof (struct hrtimer )); cpu_base = &__raw_get_cpu_var (hrtimer_bases);
@@ -1124,7 +1124,8 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,if (clock_id ==CLOCK_REALTIME && mode !=HRTIMER_MODE_ABS ) clock_id =CLOCK_MONOTONIC ; - timer->base = &cpu_base->clock_base[clock_id]; + base =hrtimer_clockid_to_base (clock_id); + timer->base = &cpu_base->clock_base[base];hrtimer_init_timer_hres (timer);timerqueue_init (&timer->node);
@@ -1160,9 +1161,10 @@ EXPORT_SYMBOL_GPL(hrtimer_init);int hrtimer_get_res (const clockid_t which_clock,struct timespec *tp) {struct hrtimer_cpu_base *cpu_base; +int base =hrtimer_clockid_to_base (which_clock); cpu_base = &__raw_get_cpu_var (hrtimer_bases); - *tp =ktime_to_timespec (cpu_base->clock_base[which_clock].resolution); + *tp =ktime_to_timespec (cpu_base->clock_base[base].resolution);return 0 ; }
Signature · 1 line
1.7.3.2.146.gca209
RFC PATCH 1/2 hrtimers: extend hrtimer base code to handle more then 2 clockids
In reply to John Stultz[Resending, as I left off CCs before sending]
The hrtimer code is written mainly with CLOCK_REALTIME and CLOCK_MONOTONIC in mind. These are clockids 0 and 1 resepctively. However, if we are to introduce any new hrtimer bases, using new clockids, we have to skip the cputimers (clockids 2,3) as well as other clockids that may not impelement timers.
This patch adds a little bit of indirection between the clockid and the base, so that we can extend the base by one when we add a new clockid at number 7 or so.
--- include/linux/hrtimer.h | 18 +++++++++++++++++- kernel/hrtimer.c | 30 ++++++++++++++++-------------- 2 files changed, 33 insertions(+), 15 deletions(-)
include/linux/hrtimer.h +17 -1
@@ -149,7 +149,23 @@ struct hrtimer_clock_base {#endif }; -#define HRTIMER_MAX_CLOCK_BASES 2 +enum hrtimer_base_type { +HRTIMER_BASE_REALTIME , +HRTIMER_BASE_MONOTONIC , +HRTIMER_MAX_CLOCK_BASES , +}; + +static inline int hrtimer_clockid_to_base (clockid_t clock_id) +{ +switch (clock_id) { +case CLOCK_REALTIME : +return HRTIMER_BASE_REALTIME ; +case CLOCK_MONOTONIC : +return HRTIMER_BASE_MONOTONIC ; + } +WARN_ON (1 );/* Unknown clock_id */ +return 0 ; +}/* * struct hrtimer_cpu_base - the per cpu clock bases
kernel/hrtimer.c +16 -14
@@ -53,11 +53,10 @@/* * The timer bases: * -* Note: If we want to add new timer bases, we have to skip the two -* clock ids captured by the cpu-timers. We do this by holding empty -* entries rather than doing math adjustment of the clock ids. -* This ensures that we capture erroneous accesses to these clock ids -* rather than moving them into the range of valid clock id's. +* There are more clockids then hrtimer bases. Thus, we index +* into the timer bases by the hrtimer_base_type enum. When trying +* to reach a base using a clockid, hrtimer_clockid_to_base() +* is used to convert from clockid to the proper hrtimer_base_type. */ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = {
@@ -95,8 +94,8 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base) xtim =timespec_to_ktime (xts); tomono =timespec_to_ktime (tom); - base->clock_base[CLOCK_REALTIME ].softirq_time = xtim; - base->clock_base[CLOCK_MONOTONIC ].softirq_time = + base->clock_base[HRTIMER_BASE_REALTIME ].softirq_time = xtim; + base->clock_base[HRTIMER_BASE_MONOTONIC ].softirq_time =ktime_add (xtim, tomono); }
@@ -184,10 +183,11 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,struct hrtimer_cpu_base *new_cpu_base;int this_cpu =smp_processor_id ();int cpu =hrtimer_get_target (this_cpu, pinned); +int basenum =hrtimer_clockid_to_base (base->index); again: new_cpu_base = &per_cpu (hrtimer_bases, cpu); - new_base = &new_cpu_base->clock_base[base->index]; + new_base = &new_cpu_base->clock_base[basenum];if (base != new_base) {/*
@@ -627,7 +627,7 @@ static void retrigger_next_event(void *arg)/* Adjust CLOCK_REALTIME offset */ raw_spin_lock (&base->lock); - base->clock_base[CLOCK_REALTIME ].offset = + base->clock_base[HRTIMER_BASE_REALTIME ].offset =timespec_to_ktime (realtime_offset);hrtimer_force_reprogram (base,0 );
@@ -725,8 +725,8 @@ static int hrtimer_switch_to_hres(void)return 0 ; } base->hres_active =1 ; - base->clock_base[CLOCK_REALTIME ].resolution =KTIME_HIGH_RES ; - base->clock_base[CLOCK_MONOTONIC ].resolution =KTIME_HIGH_RES ; + base->clock_base[HRTIMER_BASE_REALTIME ].resolution =KTIME_HIGH_RES ; + base->clock_base[HRTIMER_BASE_MONOTONIC ].resolution =KTIME_HIGH_RES ;tick_setup_sched_timer ();
@@ -1116,7 +1116,7 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, enum hrtimer_mode mode) {struct hrtimer_cpu_base *cpu_base; - +int base;memset (timer,0 ,sizeof (struct hrtimer )); cpu_base = &__raw_get_cpu_var (hrtimer_bases);
@@ -1124,7 +1124,8 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,if (clock_id ==CLOCK_REALTIME && mode !=HRTIMER_MODE_ABS ) clock_id =CLOCK_MONOTONIC ; - timer->base = &cpu_base->clock_base[clock_id]; + base =hrtimer_clockid_to_base (clock_id); + timer->base = &cpu_base->clock_base[base];hrtimer_init_timer_hres (timer);timerqueue_init (&timer->node);
@@ -1160,9 +1161,10 @@ EXPORT_SYMBOL_GPL(hrtimer_init);int hrtimer_get_res (const clockid_t which_clock,struct timespec *tp) {struct hrtimer_cpu_base *cpu_base; +int base =hrtimer_clockid_to_base (which_clock); cpu_base = &__raw_get_cpu_var (hrtimer_bases); - *tp =ktime_to_timespec (cpu_base->clock_base[which_clock].resolution); + *tp =ktime_to_timespec (cpu_base->clock_base[base].resolution);return 0 ; }
Signature · 1 line
1.7.3.2.146.gca209
RFC PATCH 2/2 hrtimers: Add CLOCK_BOOTTIME clockid, hrtimerbase and posix interface
In reply to John StultzCLOCK_MONOTONIC stops while the system is in suspend. This is because to applications system suspend is invisible. However, there is a growing set of applications that are wanting to be suspend-aware, but do not want to deal with the complicatoins of CLOCK_REALTIME (which might jump around if settimeofday is called).
For these applications, I propose a new clockid: CLOCK_BOOTTIME. CLOCK_BOOTTIME is idential to CLOCK_MONOTONIC, except it also includes any time spent in suspend.
This patch adds the new CLOCK_BOOTTIME clockid, as well as the infrastructure needed to support hrtimers against it, and the wiring to expose it out via the posix interface.
--- include/linux/hrtimer.h | 4 ++ include/linux/time.h | 4 ++ kernel/hrtimer.c | 14 +++++++- kernel/posix-timers.c | 16 ++++++++- kernel/time/timekeeping.c | 79 ++++++++++++++++++++++++++++++++++++++++++++- 5 files changed, 113 insertions(+), 4 deletions(-)
include/linux/hrtimer.h +4 -0
@@ -152,6 +152,7 @@ struct hrtimer_clock_base {enum hrtimer_base_type {HRTIMER_BASE_REALTIME ,HRTIMER_BASE_MONOTONIC , +HRTIMER_BASE_BOOTTIME ,HRTIMER_MAX_CLOCK_BASES , };
@@ -162,6 +163,8 @@ static inline int hrtimer_clockid_to_base(clockid_t clock_id)return HRTIMER_BASE_REALTIME ;case CLOCK_MONOTONIC :return HRTIMER_BASE_MONOTONIC ; +case CLOCK_BOOTTIME : +return HRTIMER_BASE_BOOTTIME ; }WARN_ON (1 );/* Unknown clock_id */ return 0 ;
@@ -325,6 +328,7 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer)extern ktime_t ktime_get (void );extern ktime_t ktime_get_real (void ); +extern ktime_t ktime_get_boottime (void ); DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
include/linux/time.h +4 -0
@@ -126,6 +126,8 @@ unsigned long get_seconds(void);struct timespec current_kernel_time (void );struct timespec __current_kernel_time (void );/* does not take xtime_lock */ struct timespec __get_wall_to_monotonic (void );/* does not take xtime_lock */ +extern struct timespec __get_sleep_time (void );/* does not take xtime_lock */ +struct timespec get_monotonic_coarse (void );#define CURRENT_TIME (current_kernel_time())
@@ -160,6 +162,7 @@ extern void getnstimeofday(struct timespec *tv);extern void getrawmonotonic (struct timespec *ts);extern void getboottime (struct timespec *ts);extern void monotonic_to_bootbased (struct timespec *ts); +extern void get_monotonic_boottime (struct timespec *ts);extern struct timespec timespec_trunc (struct timespec t,unsigned gran);extern int timekeeping_valid_for_hres (void );
@@ -290,6 +293,7 @@ struct itimerval {#define CLOCK_MONOTONIC_RAW 4#define CLOCK_REALTIME_COARSE 5#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7/* * The IDs of various hardware clocks:
kernel/hrtimer.c +12 -2
@@ -73,6 +73,11 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = .get_time = &ktime_get, .resolution = KTIME_LOW_RES, }, + { + .index = CLOCK_BOOTTIME, + .get_time = &ktime_get_boottime, + .resolution = KTIME_LOW_RES, + }, } };
@@ -82,21 +87,26 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =*/ static void hrtimer_get_softirq_time (struct hrtimer_cpu_base *base) { -ktime_t xtim, tomono; -struct timespec xts, tom; +ktime_t xtim, tomono, sleep; +struct timespec xts, tom, slp;unsigned long seq;do { seq =read_seqbegin (&xtime_lock); xts =__current_kernel_time (); tom =__get_wall_to_monotonic (); + slp =__get_sleep_time (); }while (read_seqretry (&xtime_lock, seq)); xtim =timespec_to_ktime (xts); tomono =timespec_to_ktime (tom); + sleep =timespec_to_ktime (slp); base->clock_base[HRTIMER_BASE_REALTIME ].softirq_time = xtim; base->clock_base[HRTIMER_BASE_MONOTONIC ].softirq_time =ktime_add (xtim, tomono); + base->clock_base[HRTIMER_BASE_BOOTTIME ].softirq_time = +ktime_add (base->clock_base[HRTIMER_BASE_MONOTONIC ].softirq_time, + sleep); }/*
kernel/posix-timers.c +15 -1
@@ -240,7 +240,7 @@ static int posix_ktime_get_ts(clockid_t which_clock, struct timespec *tp) }/* -* Get monotonic time for posix timers +* Get monotonic-raw time for posix timers */ static int posix_get_monotonic_raw (clockid_t which_clock,struct timespec *tp) {
@@ -267,6 +267,14 @@ static int posix_get_coarse_res(const clockid_t which_clock, struct timespec *tp *tp =ktime_to_timespec (KTIME_LOW_RES );return 0 ; } + +static int posix_get_boottime (const clockid_t which_clock,struct timespec *tp) +{ +get_monotonic_boottime (tp); +return 0 ; +} + +/* * Initialize everything, well, just everything in Posix clocks/timers ;) */
@@ -301,12 +309,18 @@ static __init int init_posix_timers(void) .timer_create = no_timer_create, .nsleep = no_nsleep, }; +struct k_clock clock_boottime = { + .clock_getres = hrtimer_get_res, + .clock_get = posix_get_boottime, + .clock_set = do_posix_clock_nosettime, + };register_posix_clock (CLOCK_REALTIME , &clock_realtime);register_posix_clock (CLOCK_MONOTONIC , &clock_monotonic);register_posix_clock (CLOCK_MONOTONIC_RAW , &clock_monotonic_raw);register_posix_clock (CLOCK_REALTIME_COARSE , &clock_realtime_coarse);register_posix_clock (CLOCK_MONOTONIC_COARSE , &clock_monotonic_coarse); +register_posix_clock (CLOCK_BOOTTIME , &clock_boottime); posix_timers_cache = kmem_cache_create("posix_timers_cache", sizeof (struct k_itimer), 0, SLAB_PANIC,
kernel/time/timekeeping.c +78 -1
91 lines not on this page · raw message
Signature · 1 line
1.7.3.2.146.gca209
RFC PATCH 2/2 hrtimers: Add CLOCK_BOOTTIME clockid, hrtimerbase and posix interface
[Resending with proper CC's]
CLOCK_MONOTONIC stops while the system is in suspend. This is because to applications system suspend is invisible. However, there is a growing set of applications that are wanting to be suspend-aware, but do not want to deal with the complicatoins of CLOCK_REALTIME (which might jump around if settimeofday is called).
For these applications, I propose a new clockid: CLOCK_BOOTTIME. CLOCK_BOOTTIME is idential to CLOCK_MONOTONIC, except it also includes any time spent in suspend.
This patch adds the new CLOCK_BOOTTIME clockid, as well as the infrastructure needed to support hrtimers against it, and the wiring to expose it out via the posix interface.
--- include/linux/hrtimer.h | 4 ++ include/linux/time.h | 4 ++ kernel/hrtimer.c | 14 +++++++- kernel/posix-timers.c | 16 ++++++++- kernel/time/timekeeping.c | 79 ++++++++++++++++++++++++++++++++++++++++++++- 5 files changed, 113 insertions(+), 4 deletions(-)
include/linux/hrtimer.h +4 -0
@@ -152,6 +152,7 @@ struct hrtimer_clock_base {enum hrtimer_base_type {HRTIMER_BASE_REALTIME ,HRTIMER_BASE_MONOTONIC , +HRTIMER_BASE_BOOTTIME ,HRTIMER_MAX_CLOCK_BASES , };
@@ -162,6 +163,8 @@ static inline int hrtimer_clockid_to_base(clockid_t clock_id)return HRTIMER_BASE_REALTIME ;case CLOCK_MONOTONIC :return HRTIMER_BASE_MONOTONIC ; +case CLOCK_BOOTTIME : +return HRTIMER_BASE_BOOTTIME ; }WARN_ON (1 );/* Unknown clock_id */ return 0 ;
@@ -325,6 +328,7 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer)extern ktime_t ktime_get (void );extern ktime_t ktime_get_real (void ); +extern ktime_t ktime_get_boottime (void ); DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
include/linux/time.h +4 -0
@@ -126,6 +126,8 @@ unsigned long get_seconds(void);struct timespec current_kernel_time (void );struct timespec __current_kernel_time (void );/* does not take xtime_lock */ struct timespec __get_wall_to_monotonic (void );/* does not take xtime_lock */ +extern struct timespec __get_sleep_time (void );/* does not take xtime_lock */ +struct timespec get_monotonic_coarse (void );#define CURRENT_TIME (current_kernel_time())
@@ -160,6 +162,7 @@ extern void getnstimeofday(struct timespec *tv);extern void getrawmonotonic (struct timespec *ts);extern void getboottime (struct timespec *ts);extern void monotonic_to_bootbased (struct timespec *ts); +extern void get_monotonic_boottime (struct timespec *ts);extern struct timespec timespec_trunc (struct timespec t,unsigned gran);extern int timekeeping_valid_for_hres (void );
@@ -290,6 +293,7 @@ struct itimerval {#define CLOCK_MONOTONIC_RAW 4#define CLOCK_REALTIME_COARSE 5#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7/* * The IDs of various hardware clocks:
kernel/hrtimer.c +12 -2
@@ -73,6 +73,11 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = .get_time = &ktime_get, .resolution = KTIME_LOW_RES, }, + { + .index = CLOCK_BOOTTIME, + .get_time = &ktime_get_boottime, + .resolution = KTIME_LOW_RES, + }, } };
@@ -82,21 +87,26 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =*/ static void hrtimer_get_softirq_time (struct hrtimer_cpu_base *base) { -ktime_t xtim, tomono; -struct timespec xts, tom; +ktime_t xtim, tomono, sleep; +struct timespec xts, tom, slp;unsigned long seq;do { seq =read_seqbegin (&xtime_lock); xts =__current_kernel_time (); tom =__get_wall_to_monotonic (); + slp =__get_sleep_time (); }while (read_seqretry (&xtime_lock, seq)); xtim =timespec_to_ktime (xts); tomono =timespec_to_ktime (tom); + sleep =timespec_to_ktime (slp); base->clock_base[HRTIMER_BASE_REALTIME ].softirq_time = xtim; base->clock_base[HRTIMER_BASE_MONOTONIC ].softirq_time =ktime_add (xtim, tomono); + base->clock_base[HRTIMER_BASE_BOOTTIME ].softirq_time = +ktime_add (base->clock_base[HRTIMER_BASE_MONOTONIC ].softirq_time, + sleep); }/*
kernel/posix-timers.c +15 -1
@@ -240,7 +240,7 @@ static int posix_ktime_get_ts(clockid_t which_clock, struct timespec *tp) }/* -* Get monotonic time for posix timers +* Get monotonic-raw time for posix timers */ static int posix_get_monotonic_raw (clockid_t which_clock,struct timespec *tp) {
@@ -267,6 +267,14 @@ static int posix_get_coarse_res(const clockid_t which_clock, struct timespec *tp *tp =ktime_to_timespec (KTIME_LOW_RES );return 0 ; } + +static int posix_get_boottime (const clockid_t which_clock,struct timespec *tp) +{ +get_monotonic_boottime (tp); +return 0 ; +} + +/* * Initialize everything, well, just everything in Posix clocks/timers ;) */
@@ -301,12 +309,18 @@ static __init int init_posix_timers(void) .timer_create = no_timer_create, .nsleep = no_nsleep, }; +struct k_clock clock_boottime = { + .clock_getres = hrtimer_get_res, + .clock_get = posix_get_boottime, + .clock_set = do_posix_clock_nosettime, + };register_posix_clock (CLOCK_REALTIME , &clock_realtime);register_posix_clock (CLOCK_MONOTONIC , &clock_monotonic);register_posix_clock (CLOCK_MONOTONIC_RAW , &clock_monotonic_raw);register_posix_clock (CLOCK_REALTIME_COARSE , &clock_realtime_coarse);register_posix_clock (CLOCK_MONOTONIC_COARSE , &clock_monotonic_coarse); +register_posix_clock (CLOCK_BOOTTIME , &clock_boottime); posix_timers_cache = kmem_cache_create("posix_timers_cache", sizeof (struct k_itimer), 0, SLAB_PANIC,
kernel/time/timekeeping.c +78 -1
91 lines not on this page · raw message
Signature · 1 line
1.7.3.2.146.gca209