python.inc: add `--disable-ipv6` to `EXTRA_OECONF`
PATCH 1/1 python.inc: add `--disable-ipv6` to `EXTRA_OECONF`
From b2e249702a0f6b5e36a4b095f5a4c495aa5ec14f Mon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Fri, 14 Jan 2011 09:48:08 +0100
Subject: [PATCH] python.inc: add --disable-ipv6 to EXTRA_OECONF
Since commit d729d14d [1] task configure for python_2.6.5 and python_2.7.1 fails with the following error message when compiling with angstrom_2008.1 for MACHINE = "beagleboard".
checking for major... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... buggy
Fatal: You must get working getaddrinfo() function.
or you can specify "--disable-ipv6".
ERROR: Function do_configure failed
Disable IPv6 for now in Python unconditionally until a better solution is found. This patch is build tested with angstrom_2008.1 for MACHINE = "beagleboard".
(OpenWRT seems to have had the same issue [2].)
[1] http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=d729d14d9bff474f41c0853086d89cf6b50f41ff
[2] https://dev.openwrt.org/changeset/17077
--- recipes/python/python.inc | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
recipes/python/python.inc +1 -0
@@ -20,4 +20,5 @@ EXTRA_OECONF = "\ --with-signal-module \ --with-wctype-functions \ --enable-shared \ + --disable-ipv6 \ "
Signature · 1 line
1.7.2.3
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 7 lines · Paul Menzel
From
b2e249702a0f6b5e36a4b095f5a4c495aa5ec14fMon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Fri, 14 Jan 2011 09:48:08 +0100
Subject: [PATCH] python.inc: add--disable-ipv6toEXTRA_OECONFSince commit
d729d14d[1] taskconfigureforpython_2.6.5andpython_2.7.1fails with the following error message when compiling withangstrom_2008.1forMACHINE = "beagleboard".
Quoted 8 lines
checking for major... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... buggy
Fatal: You must get workinggetaddrinfo()function.
or you can specify "--disable-ipv6".
ERROR: Functiondo_configurefailedDisable IPv6 for now in Python unconditionally until a better solution is found.
I don't think disabling ipv6 is the way to go, I'm comparing the eglibc before and after d729d14d to see if that reveals a clue. If it doesn't, let's put in your patch for the time being.
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFNMJzhMkyGM64RGpERAnAjAKCW9cw0VIybG39SDCtLuXZE6b25/ACeI29y bvtfj1LvCkNwVlRRD2UCJYs=
=iQYh
-----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 15 lines · Koen Kooi
Quoted 13 lines · Paul Menzel
From
b2e249702a0f6b5e36a4b095f5a4c495aa5ec14fMon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Fri, 14 Jan 2011 09:48:08 +0100
Subject: [PATCH] python.inc: add--disable-ipv6toEXTRA_OECONFSince commit
d729d14d[1] taskconfigureforpython_2.6.5andpython_2.7.1fails with the following error message when compiling withangstrom_2008.1forMACHINE = "beagleboard".checking for major... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... buggy
Fatal: You must get workinggetaddrinfo()function.
or you can specify "--disable-ipv6".
ERROR: Functiondo_configurefailed
Quoted 5 lines
Quoted 1 line
Disable IPv6 for now in Python unconditionally until a better solution is found.
I don't think disabling ipv6 is the way to go, I'm comparing the eglibc before and after
d729d14dto see if that reveals a clue. If it doesn't, let's put in your patch for the time being.
.... and the difference is that options-group.config is empty before d72 and fully populated after it. OPTION_EGLIBC_ADVANCED_INET6 is set to Y in both cases it seems.
Khem, help!
This feels like the broken wide getaddrinfo test in ruby all over again :( -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFNMKHiMkyGM64RGpERAuFJAJ0XtYegAEgZ6wpVswCCGPb6a3YcQQCdGbhc gwL/7gtHyRYXX+oiAEtgx/c=
=XyNb
-----END PGP SIGNATURE-----
Quoted 21 lines · Koen Kooi
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 17 lines · Koen Kooi
Quoted 15 lines · Paul Menzel
From
b2e249702a0f6b5e36a4b095f5a4c495aa5ec14fMon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Fri, 14 Jan 2011 09:48:08 +0100
Subject: [PATCH] python.inc: add--disable-ipv6toEXTRA_OECONFSince commit
d729d14d[1] taskconfigureforpython_2.6.5andpython_2.7.1fails with the following error message when compiling withangstrom_2008.1forMACHINE = "beagleboard".checking for major... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... buggy
Fatal: You must get workinggetaddrinfo()function. or you can specify "--disable-ipv6".
ERROR: Functiondo_configurefailedDisable IPv6 for now in Python unconditionally until a better solution is found.
Quoted 7 lines
Quoted 3 lines
I don't think disabling ipv6 is the way to go, I'm comparing the eglibc before and after
d729d14dto see if that reveals a clue. If it doesn't, let's put in your patch for the time being..... and the difference is that options-group.config is empty before d72 and fully populated after it.
OPTION_EGLIBC_ADVANCED_INET6is set to Y in both cases it seems.
I was expecting it to converge to this. Do u see that libraries libc.so before and after have different content too ? Could be that the option config mechanism is getting it wrong somehow may be I should only populate options-group.config
with disabled features
Quoted 18 lines
Khem, help!
This feels like the broken wide getaddrinfo test in ruby all over again :( -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)iD8DBQFNMKHiMkyGM64RGpERAuFJAJ0XtYegAEgZ6wpVswCCGPb6a3YcQQCdGbhc gwL/7gtHyRYXX+oiAEtgx/c=
=XyNb
-----END PGP SIGNATURE-----_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 19 lines · Khem Raj
On Fri, Jan 14, 2011 at 11:20 AM, Koen Kooi <[email protected]> wrote:
Quoted 17 lines · Koen Kooi
Quoted 17 lines
Quoted 17 lines · Paul Menzel
Quoted 15 lines
From
b2e249702a0f6b5e36a4b095f5a4c495aa5ec14fMon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Fri, 14 Jan 2011 09:48:08 +0100
Subject: [PATCH] python.inc: add--disable-ipv6toEXTRA_OECONFSince commit
d729d14d[1] taskconfigureforpython_2.6.5andpython_2.7.1fails with the following error message when compiling withangstrom_2008.1forMACHINE = "beagleboard".checking for major... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... buggy
Fatal: You must get workinggetaddrinfo()function.
or you can specify "--disable-ipv6".
ERROR: Functiondo_configurefailedDisable IPv6 for now in Python unconditionally until a better solution is found.
Quoted 13 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
I don't think disabling ipv6 is the way to go, I'm comparing the eglibc before and after
d729d14dto see if that reveals a clue. If it doesn't, let's put in your patch for the time being..... and the difference is that options-group.config is empty before d72 and fully populated after it.
OPTION_EGLIBC_ADVANCED_INET6is set to Y in both cases it seems.Quoted 5 lines
I was expecting it to converge to this. Do u see that libraries libc.so before and after have different content too ? Could be that the option config mechanism is getting it wrong somehow may be I should only populate options-group.config
with disabled features
Populating it only with disabled features would match the old behaviour and should make python build again. I doesn't give us the root cause, but at least it would build :)
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFNMMPUMkyGM64RGpERAr0QAKCg3AB+AqMcNQM8svqVbvnIpD6WLwCgri+J 2dimtKfPQ/BC9sqTzfURWrA=
=qmN5
-----END PGP SIGNATURE-----
Quoted 37 lines · Koen Kooi
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 19 lines · Khem Raj
On Fri, Jan 14, 2011 at 11:20 AM, Koen Kooi <[email protected]> wrote:
Quoted 17 lines · Koen Kooi
Quoted 17 lines
Quoted 17 lines · Paul Menzel
Quoted 15 lines
From
b2e249702a0f6b5e36a4b095f5a4c495aa5ec14fMon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Fri, 14 Jan 2011 09:48:08 +0100
Subject: [PATCH] python.inc: add--disable-ipv6toEXTRA_OECONFSince commit
d729d14d[1] taskconfigureforpython_2.6.5andpython_2.7.1fails with the following error message when compiling withangstrom_2008.1forMACHINE = "beagleboard".checking for major... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... buggy
Fatal: You must get workinggetaddrinfo()function. or you can specify "--disable-ipv6".
ERROR: Functiondo_configurefailedDisable IPv6 for now in Python unconditionally until a better solution is found.
Quoted 13 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
I don't think disabling ipv6 is the way to go, I'm comparing the eglibc before and after
d729d14dto see if that reveals a clue. If it doesn't, let's put in your patch for the time being..... and the difference is that options-group.config is empty before d72 and fully populated after it.
OPTION_EGLIBC_ADVANCED_INET6is set to Y in both cases it seems.Quoted 5 lines
I was expecting it to converge to this. Do u see that libraries libc.so before and after have different content too ? Could be that the option config mechanism is getting it wrong somehow may be I should only populate options-group.config
with disabled features
Quoted 3 lines
Populating it only with disabled features would match the old behaviour and should make python build again. I doesn't give us the root cause, but at least it would build :)
yeah it would be a bug in option config if it could not deal with an option being set to 'y' twice
Quoted 18 lines
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)iD8DBQFNMMPUMkyGM64RGpERAr0QAKCg3AB+AqMcNQM8svqVbvnIpD6WLwCgri+J 2dimtKfPQ/BC9sqTzfURWrA=
=qmN5
-----END PGP SIGNATURE-----_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Quoted 38 lines · Khem Raj
Quoted 37 lines · Koen Kooi
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Quoted 32 lines · Khem Raj
On Fri, Jan 14, 2011 at 11:20 AM, Koen Kooi<[email protected]> wrote:
Quoted 15 lines · Koen Kooi
Quoted 15 lines
Quoted 15 lines · Paul Menzel
Quoted 13 lines
From
b2e249702a0f6b5e36a4b095f5a4c495aa5ec14fMon Sep 17 00:00:00 2001
From: Paul Menzel<[email protected]>
Date: Fri, 14 Jan 2011 09:48:08 +0100
Subject: [PATCH] python.inc: add--disable-ipv6toEXTRA_OECONFSince commit
d729d14d[1] taskconfigureforpython_2.6.5andpython_2.7.1fails with the following error message when compiling withangstrom_2008.1forMACHINE = "beagleboard".checking for major... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... buggy
Fatal: You must get workinggetaddrinfo()function.
or you can specify "--disable-ipv6".
ERROR: Functiondo_configurefailedQuoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
Disable IPv6 for now in Python unconditionally until a better solution is found.
I don't think disabling ipv6 is the way to go, I'm comparing the eglibc before and after
d729d14dto see if that reveals a clue. If it doesn't, let's put in your patch for the time being..... and the difference is that options-group.config is empty before d72 and fully populated after it.
OPTION_EGLIBC_ADVANCED_INET6is set to Y in both cases it seems.Quoted 5 lines
I was expecting it to converge to this. Do u see that libraries libc.so before and after have different content too ? Could be that the option config mechanism is getting it wrong somehow may be I should only populate options-group.config
with disabled features
Quoted 8 lines
Quoted 3 lines
Populating it only with disabled features would match the old behaviour and should make python build again. I doesn't give us the root cause, but at least it would build :)
yeah it would be a bug in option config if it could not deal with an option being set to 'y' twice
Quoted 1 line
OK it has nothing to do with eglibc change. Infact its due to
commit a88aca1d7dfa3a08957dd49cb61bac850f197106
Author: Bernhard Reutner-Fischer <[email protected]> Date: Wed Jan 12 20:34:55 2011 +0100
autotools.bbclass: pass distro_imposed_configure_flags
This makes --enable-ipv6 passed to configure of all recipes
which use autotools. Now in configure there is a runtime test
to determine buggygetaddrinfo and as we are cross compiling this test goes wrong and if ipv6 is enabled then its reported as fatal
if test "$ipv6" = "yes"; then
echo 'Fatal: You must get working getaddrinfo() function.'
echo ' or you can specify "--disable-ipv6"'.
One solution we have is that we cache this variable
I will post a patch in this direction soon.
Thanks
-Khem