Hardware solution? (or v.easy software fix instead)
Witaj ajpearce,
W Twoim liœcie datowanym 21 stycznia 2005 (00:17:38) mo¿na przeczytaæ:
Slightly OT but,
For a Linksys wireless router (WRT54G) there are perfect solutions using wondershaper + iproute2 in an alternative firmwares. Also you can build your own firmware cause a build environment just works.
Look at http://www.portless.net/menu/ewrt/ as a starting point, links at the end will drive you to the all important places.
From my experience: kernel 2.4.20 + iproute2 + wonderhaper + ebtables + iptables + vconfig are just ready waiting for use.
Quoted 2 lines
The linksys linux router sounds ideal. Has anyone setup bandwidth management on it before though? Sounds like a tall order?
[snip]
Quoted 6 lines
Quoted 3 lines
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 6 lines
Pozdrowienia, Robert Kurjata _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I am considering this.
But we will also be using a cable modem. I wondered if I could even get the cable modem to do CBQ as well with something like sigma!
Just a thought though.
Quoted 30 lines · Robert Kurjata
Witaj ajpearce,
W Twoim liście datowanym 21 stycznia 2005 (00:17:38) można przeczytać:
Slightly OT but,
For a Linksys wireless router (WRT54G) there are perfect solutions using wondershaper + iproute2 in an alternative firmwares. Also you can build your own firmware cause a build environment just works.
Look at http://www.portless.net/menu/ewrt/ as a starting point, links at the end will drive you to the all important places.
From my experience: kernel 2.4.20 + iproute2 + wonderhaper + ebtables + iptables + vconfig are just ready waiting for use.
Quoted 2 lines
The linksys linux router sounds ideal. Has anyone setup bandwidth management on it before though? Sounds like a tall order?
[snip]
Quoted 6 lines
Quoted 3 lines
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
--
Pozdrowienia,
Robert Kurjata_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/