HDMI with more than 2ch ?
Hi,
I'm using HDMI output on an HD 2600, using KMS from kernel 2.6.37:
http://www.alsa-project.org/db/?f=b3f67a0890f9878b7b3f345578e24eda0aaa59ac
The problem is that only 2ch are supported (not 1, not 3 or more). I tested with speaker-test, it only works with -c 2.
So how can I access the other PCM channels ? There are 8 of them available in the HDMI standard, I thought the card should be able to drive all of them.
Thanks,
Xav
Quoted 6 lines · Xavier Bestel
Hi,
I'm using HDMI output on an HD 2600, using KMS from kernel 2.6.37:
http://www.alsa-project.org/db/?f=b3f67a0890f9878b7b3f345578e24eda0aaa59ac
The problem is that only 2ch are supported (not 1, not 3 or more). I tested with speaker-test, it only works with -c 2.
Just in case:
[root@awak:~]$ speaker-test -Dhw:1,3 -c6 -twav
speaker-test 1.0.23
Playback device is hw:1,3
Stream parameters are 48000Hz, S16_LE, 6 channels
WAV file(s)
Channels count (6) not available for playbacks: Argument invalide Setting of hwparams failed: Argument invalide
Quoted 10 lines · Xavier Bestel
Hi,
I'm using HDMI output on an HD 2600, using KMS from kernel 2.6.37:
http://www.alsa-project.org/db/?f=b3f67a0890f9878b7b3f345578e24eda0aaa59ac
The problem is that only 2ch are supported (not 1, not 3 or more). I tested with speaker-test, it only works with -c 2.So how can I access the other PCM channels ? There are 8 of them available in the HDMI standard, I thought the card should be able to drive all of them.
According to your HDMI codec it only supports stereo output, not 8-channel PCM. This is a limitation in your hardware, not in the HDMI standard.
That is, if you want more channels, you probably want to ac3-encode the audio data.
Signature · 2 lines
David Henningsson, Canonical Ltd. http://launchpad.net/~diwic
Quoted 6 lines · David Henningsson
According to your HDMI codec it only supports stereo output, not 8-channel PCM. This is a limitation in your hardware, not in the HDMI standard.
That is, if you want more channels, you probably want to ac3-encode the audio data.
I've found it's a driver problem. Please read the thread titled "ALSA multichannel through HDMI" for the gory details.
Xav
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel