Add support for u-boot-2010.12 & multiple binaries
PATCH v2 1/1 Add support for u-boot-2010.12 & multiple binaries
By defining "UBOOT_MACHINES" in your config, you can have multiple binaries built.
Example:UBOOT_MACHINES = "at91sam9m10g45ek_sd at91sam9m10g45ek"
Note that while AT91 boards can compile with the
patches, some stuff like SD-Card is broken,
so it is not yet default.
Signed-off-by Ulf Samuelsson <[email protected]>
--- recipes/libgpod/libimobiledevice_1.0.0.bb | 2 +- recipes/python/python.inc | 1 + .../at91/0001-Make-AT91-boards-compilable.patch | 291 +++++++++++++++++++ .../at91/0002-Add-better-dataflash-support.patch | 299 ++++++++++++++++++++ ...nable-SD-Card-boot-for-SAM9M10-G45-boards.patch | 265 +++++++++++++++++ recipes/u-boot/u-boot_2010.12.bb | 51 ++++ recipes/u-boot/u-boot_r2.inc | 90 ++++++ 7 files changed, 998 insertions(+), 1 deletions(-) create mode 100644 recipes/u-boot/u-boot-2010.12/at91/0001-Make-AT91-boards-compilable.patch create mode 100644 recipes/u-boot/u-boot-2010.12/at91/0002-Add-better-dataflash-support.patch create mode 100644 recipes/u-boot/u-boot-2010.12/at91/0003-Enable-SD-Card-boot-for-SAM9M10-G45-boards.patch create mode 100644 recipes/u-boot/u-boot_2010.12.bb create mode 100644 recipes/u-boot/u-boot_r2.inc
recipes/libgpod/libimobiledevice_1.0.0.bb +1 -1
@@ -1,7 +1,7 @@ DESCRIPTION = "A protocol library to access an iPhone or iPod Touch in Linux" LICENSE = "GPLv2/LGPLv2.1" -DEPENDS = "libplist swig usbmuxd glib-2.0 gnutls libgcrypt" +DEPENDS = "libplist swig usbmuxd glib-2.0 gnutls libgcrypt libtasn1" inherit autotools
recipes/python/python.inc +1 -0
@@ -20,4 +20,5 @@ EXTRA_OECONF = "\ --with-signal-module \ --with-wctype-functions \ --enable-shared \ + --disable-ipv6 \ "
recipes/u-boot/u-boot-2010.12/at91/0001-Make-AT91-boards-compilable.patch new file +291 -0
291 lines not on this page · raw message
recipes/u-boot/u-boot-2010.12/at91/0002-Add-better-dataflash-support.patch new file +299 -0
299 lines not on this page · raw message
recipes/u-boot/u-boot-2010.12/at91/0003-Enable-SD-Card-boot-for-SAM9M10-G45-boards.patch new file +265 -0
265 lines not on this page · raw message
recipes/u-boot/u-boot_2010.12.bb new file +51 -0
51 lines not on this page · raw message
recipes/u-boot/u-boot_r2.inc new file +90 -0
90 lines not on this page · raw message
Signature · 1 line
1.6.3.3