Skip to contentSkip to conversation

input - wacom: Support 2FGT in MT format

PATCH Superseded Ping Cheng 2 participants 3 messages Feb 16, 2011 – Feb 25, 2011 1 message not in the archive

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Ping Cheng

author
#0 lore raw

PATCH v2 4/4 input - wacom: Support 2FGT in MT format

---
v2: Removed the touch status check if-statement as suggested by Henrik for code flow clarity.

---
 drivers/input/tablet/wacom_sys.c |   12 ++++----
 drivers/input/tablet/wacom_wac.c |   60 ++++++++++++++++++++++++++++++-------
 2 files changed, 54 insertions(+), 18 deletions(-)
drivers/input/tablet/wacom_sys.c +6 -6
index fc38149..b97665f 100644
@@ -193,16 +193,16 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			case HID_USAGE_X:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_DOUBLETAP;
+						features->device_type = BTN_TOOL_FINGER;
 						if (features->type == TABLETPC2FG) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 						}
 						if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->x_phy =
 								get_unaligned_le16(&report[i + 5]);
 							features->x_max =
@@ -241,11 +241,11 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			case HID_USAGE_Y:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_DOUBLETAP;
+						features->device_type = BTN_TOOL_FINGER;
 						if (features->type == TABLETPC2FG) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->y_max =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_phy =
@@ -254,7 +254,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 						} else if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->y_phy =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_max =
drivers/input/tablet/wacom_wac.c +48 -12

109 lines not on this page · raw message

Signature · 1 line
1.7.4
#1 lore raw

Hi Ping,

Quoted 81 lines · Ping Cheng

---
v2: Removed the touch status check if-statement as suggested by Henrik for code flow clarity.

---
 drivers/input/tablet/wacom_sys.c |   12 ++++----
 drivers/input/tablet/wacom_wac.c |   60 ++++++++++++++++++++++++++++++-------
 2 files changed, 54 insertions(+), 18 deletions(-)
drivers/input/tablet/wacom_sys.c +6 -6
index fc38149..b97665f 100644
@@ -193,16 +193,16 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			case HID_USAGE_X:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_DOUBLETAP;
+						features->device_type = BTN_TOOL_FINGER;
 						if (features->type == TABLETPC2FG) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 						}
 						if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->x_phy =
 								get_unaligned_le16(&report[i + 5]);
 							features->x_max =
@@ -241,11 +241,11 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			case HID_USAGE_Y:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_DOUBLETAP;
+						features->device_type = BTN_TOOL_FINGER;
 						if (features->type == TABLETPC2FG) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->y_max =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_phy =
@@ -254,7 +254,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 						} else if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->y_phy =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_max =
drivers/input/tablet/wacom_wac.c +16 -0
index fc0669d..8a21fcb 100644
@@ -675,6 +675,38 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
+static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
+{
+	struct input_dev *input = wacom->input;
+	unsigned char *data = wacom->data;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		int p = data[1] & (1 << i);
+		bool touch = p && !wacom->shared->stylus_in_proximity;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+		if (touch) {
+			int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
+			int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
+

drivers/input/tablet/wacom_wac.c static int wacom_intuos_irq(struct wacom_wac *wacom) · line 703

Quoted 10 lines
drivers/input/tablet/wacom_wac.c +10 -0
+			input_report_abs(input, ABS_MT_POSITION_X, x);
+			input_report_abs(input, ABS_MT_POSITION_Y, y);
+		}
+
+		/* keep touch bit to send proper touch up event */
+		if (i == 0)
+			wacom->shared->touch_down = touch;
+		else
+			wacom->shared->touch_down = max(touch, wacom->shared->touch_down);
+	}

How about wacom->shared->touch_down = contact_count > 0 instead?

Quoted 77 lines
drivers/input/tablet/wacom_wac.c +21 -11
+
+	input_mt_report_pointer_emulation(input, true);
+
+	return 1;
+}
+
 static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
 {
 	char *data = wacom->data;
@@ -753,6 +785,8 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 
 	if (len == WACOM_PKGLEN_TPC1FG || data[0] == WACOM_REPORT_TPC1FG)
 		return wacom_tpc_single_touch(wacom, len);
+	else if (data[0] == WACOM_REPORT_TPC2FG)
+		return wacom_tpc_mt_touch(wacom);
 	else if (data[0] == WACOM_REPORT_PENABLED)
 		return wacom_tpc_pen(wacom);
 
@@ -979,7 +1013,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 {
 
 	/* touch device found but size is not defined. use default */
-	if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) {
+	if (features->device_type == BTN_TOOL_FINGER && !features->x_max) {
 		features->x_max = 1023;
 		features->y_max = 1023;
 	}
@@ -991,7 +1025,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* quirks for bamboo touch */
 	if (features->type == BAMBOO_PT &&
-	    features->device_type == BTN_TOOL_TRIPLETAP) {
+	    features->device_type == BTN_TOOL_DOUBLETAP) {
 		features->x_max <<= 5;
 		features->y_max <<= 5;
 		features->x_fuzz <<= 5;
@@ -1127,28 +1161,30 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		break;
 
 	case TABLETPC2FG:
-		if (features->device_type == BTN_TOOL_TRIPLETAP) {
-			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
-			input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+		if (features->device_type == BTN_TOOL_DOUBLETAP) {
+
+			input_mt_init_slots(input_dev, 2);
+			input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+					0, MT_TOOL_MAX, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+					0, features->x_max, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+					0, features->y_max, 0, 0);
 		}
 		/* fall through */
 
 	case TABLETPC:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
-		if (features->device_type == BTN_TOOL_DOUBLETAP ||
-		    features->device_type == BTN_TOOL_TRIPLETAP) {
+		if (features->device_type != BTN_TOOL_PEN) {
 			input_abs_set_res(input_dev, ABS_X,
 				wacom_calculate_touch_res(features->x_max,
 							features->x_phy));
 			input_abs_set_res(input_dev, ABS_Y,
 				wacom_calculate_touch_res(features->y_max,
 							features->y_phy));
-		}
-
-		if (features->device_type != BTN_TOOL_PEN)
 			break;  /* no need to process stylus stuff */
-
+		}
 		/* fall through */
 
 	case PL:

drivers/input/tablet/wacom_wac.c void wacom_setup_input_capabilities(struct input_dev *input_dev, · line 1208

Quoted 8 lines
drivers/input/tablet/wacom_wac.c +1 -1
@@ -1166,7 +1202,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	case BAMBOO_PT:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
-		if (features->device_type == BTN_TOOL_TRIPLETAP) {
+		if (features->device_type == BTN_TOOL_DOUBLETAP) {
 			__set_bit(BTN_LEFT, input_dev->keybit);
 			__set_bit(BTN_FORWARD, input_dev->keybit);
 			__set_bit(BTN_BACK, input_dev->keybit);

Thanks,
Henrik

#3 lore raw
In reply to a message not in the archive
Quoted 4 lines
Quoted 2 lines

How about wacom->shared->touch_down = contact_count > 0 instead?

I can change to that. It doesn't change the logic though.

Yes, please do, although if you plan to keep the current logic, the naming should be something like contact_with_no_pen_down_count instead. ;-)

Cheers,
Henrik