gpio: add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries will be added to modules.pcimap:

pch_gpio 0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
ml_ioh_gpio 0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0

Signed-off-by Axel Lin <[email protected]>

Cc Tomoya MORINAGA <[email protected]>

---
 drivers/gpio/ml_ioh_gpio.c |    1 +
 drivers/gpio/pch_gpio.c    |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)

drivers/gpio/ml_ioh_gpio.c +1 -0

index cead8e6..7f6f01a 100644
@@ -326,6 +326,7 @@ static DEFINE_PCI_DEVICE_TABLE(ioh_gpio_pcidev_id) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x802E) },
 	{ 0, }
 };
+MODULE_DEVICE_TABLE(pci, ioh_gpio_pcidev_id);
 
 static struct pci_driver ioh_gpio_driver = {
 	.name = "ml_ioh_gpio",

drivers/gpio/pch_gpio.c +1 -0

index 0eba0a7..2c6af87 100644
@@ -286,6 +286,7 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
 	{ 0, }
 };
+MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
 
 static struct pci_driver pch_gpio_driver = {
 	.name = "pch_gpio",

Signature · 1 line

1.7.2