Skip to contentSkip to conversation

Pineview + libva

DISCUSSION Steven Newbury 2 participants 4 messages Mar 22, 2011 – Mar 24, 2011

lore
Share & tools
lore
#0 lore raw

I'm building a HD network media player device and thought VAAPI was supposed to be supported on Pineview, am I wrong?

#1 lore raw
Quoted 2 lines · Steven Newbury

I'm building a HD network media player device and thought VAAPI was supposed to be supported on Pineview, am I wrong?

To answer my own question somewhat, from the list here:
http://en.wikipedia.org/wiki/Intel_GMA

It's clear the Pineview doesn't support hw VC-1 or AVC, but does support full MPEG2, but I guess, given the utility of MPEG2 hw accel vs h.264 there isn't too much interest in getting that working.

I'll just have to hope there's enough performance from the CPU to cope with 720p material...

#2 lore raw
Quoted 4 lines · Steven Newbury
Quoted 2 lines · Steven Newbury

I'm building a HD network media player device and thought VAAPI was supposed to be supported on Pineview, am I wrong?

Quoted 8 lines

To answer my own question somewhat, from the list here:
http://en.wikipedia.org/wiki/Intel_GMA

It's clear the Pineview doesn't support hw VC-1 or AVC, but does support full MPEG2, but I guess, given the utility of MPEG2 hw accel vs h.264 there isn't too much interest in getting that working.

I'll just have to hope there's enough performance from the CPU to cope with 720p material...

I believe libva mostly supports gen4 and up. Pineview is supposed to be gen3. Perhaps XVMC may still work for it though.
In general don't buy hardware unless you know the driver supports your desired features. I should have listened to myself when I got a G45 and had the hope the h264 decoding support wouldn't take too long...

Cheers,

Sander

#3 lore raw

Missed CC to list (forwarded)
----- Original message -----
From Steven Newbury <[email protected]> Sent  Thu, 24 Mar 2011, 12:07:06 GMT To Sander Jansen <[email protected]> Subject Re: [Intel-gfx] Pineview + libva

Quoted 25 lines

----- Original message -----

Quoted 13 lines
Quoted 11 lines · Steven Newbury
Quoted 2 lines · Steven Newbury

I'm building a HD network media player device and thought VAAPI was supposed to be supported on Pineview, am I wrong?

To answer my own question somewhat, from the list here:
http://en.wikipedia.org/wiki/Intel_GMA

It's clear the Pineview doesn't support hw VC-1 or AVC, but does support full MPEG2, but I guess, given the utility of MPEG2 hw accel vs h.264 there isn't too much interest in getting that working.

Quoted 5 lines
Quoted 2 lines

I'll just have to hope there's enough performance from the CPU to cope with 720p material...

I believe libva mostly supports gen4 and up. Pineview is supposed to be gen3. Perhaps XVMC may still work for it though.

I'm using MythTV, AFAIK they've dropped XvMC in favour of VAAPI and VDPAU.

Quoted 3 lines

In general don't buy hardware unless you know the driver supports your desired features. I should have listened to myself when I got a G45 and had the hope the h264 decoding support wouldn't take too long...

Quoted 6 lines

Always good advise! In my case h.264 would have been really nice to have, but hw MPEG2 is actually very useful for MythTV, and I can always transcode HD content if necessary.

What would be needed to get libva supporting the gen3 MPEG2 accelerator functionality, is there much difference between gen3 and gen4 in that regard?

_______________________________________________
Intel-gfx mailing list [email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx