hostap-daemon: build from git sources
PATCH v2 1/1 hostap-daemon: build from git sources
* Builds a new version 0.8.x which is not released yet as a zip file. This version has new features like WIFI-direct used in new mac80211 versions
* As the recipe is very similar to the 0.7.3 version, I have created a common include file shared between the 0.7.3 version and the git version
* Updated the 0.7.3 recipe to use this include file and bumped the PR
--- recipes/hostap/hostap-daemon-0.7.inc | 26 ++++ recipes/hostap/hostap-daemon-git/defconfig | 187 ++++++++++++++++++++++++++++ recipes/hostap/hostap-daemon_0.7.3.bb | 29 +---- recipes/hostap/hostap-daemon_git.bb | 16 +++ 4 files changed, 233 insertions(+), 25 deletions(-) create mode 100644 recipes/hostap/hostap-daemon-0.7.inc create mode 100644 recipes/hostap/hostap-daemon-git/defconfig create mode 100644 recipes/hostap/hostap-daemon_git.bb
recipes/hostap/hostap-daemon-0.7.inc new file +26 -0
@@ -0,0 +1,26 @@ +HOMEPAGE = "http://hostap.epitest.fi" +SECTION = "kernel/userland" +PRIORITY = "optional" +LICENSE = "GPL" +DEPENDS = "libnl openssl" + +inherit update-rc.d +INITSCRIPT_NAME=hostapd + +do_configure() { + install -m 0644 ${WORKDIR}/defconfig ${S}/.config +} + +do_compile() { + make +} + +do_install() { + install -d ${D}${sbindir} ${D}${sysconfdir}/init.d + install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir} + install -m 0755 ${S}/hostapd ${D}${sbindir} + install -m 0755 ${S}/hostapd_cli ${D}${sbindir} + install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd +} + +CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"
recipes/hostap/hostap-daemon-git/defconfig new file +187 -0
187 lines not on this page · raw message
recipes/hostap/hostap-daemon_0.7.3.bb +4 -25
@@ -1,10 +1,8 @@ DESCRIPTION = "User space daemon for extended IEEE 802.11 management" -HOMEPAGE = "http://hostap.epitest.fi" -SECTION = "kernel/userland" -PRIORITY = "optional" -LICENSE = "GPL" -DEPENDS = "libnl openssl" -PR = "r2" + +require hostap-daemon-0.7.inc + +PR = "r3" DEFAULT_PREFERENCE = "-1"
@@ -16,23 +14,4 @@ SRC_URI[sha256sum] = "31eb2781f37e1a4c27969d1594f8019c0ca87779349c099ab812833289 S = "${WORKDIR}/hostapd-${PV}/hostapd" -inherit update-rc.d -INITSCRIPT_NAME=hostapd - -do_configure() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config -} - -do_compile() { - make -} - -do_install() { - install -d ${D}${sbindir} ${D}${sysconfdir}/init.d - install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir} - install -m 0755 ${S}/hostapd ${D}${sbindir} - install -m 0755 ${S}/hostapd_cli ${D}${sbindir} - install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd -} -CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"
recipes/hostap/hostap-daemon_git.bb new file +16 -0
@@ -0,0 +1,16 @@ +DESCRIPTION = "User space daemon for extended IEEE 802.11 management" + +require hostap-daemon-0.7.inc + +PR = "r0" +SRCREV = "b8fb017272ed4794339978c9fbc0e74571a44728" + +DEFAULT_PREFERENCE = "-1" + +SRC_URI = "git://w1.fi/srv/git/hostap.git;protocol=git \ + file://defconfig \ + file://init" + +S = "${WORKDIR}/git/hostapd" + +
Signature · 1 line
1.7.0.4
Ping: [PATCHv2] hostap-daemon: build from git sources
Quoted 344 lines
-----Original Message-----
From: Eyal Reizer [mailto:[email protected]]
Sent: Wednesday, April 13, 2011 1:08 PM
To: [email protected]
Cc: Reizer, Eyal
Subject: [PATCHv2] hostap-daemon: build from git sources* Builds a new version 0.8.x which is not released yet as a zip file. This version has new features like WIFI-direct used in new mac80211 versions
* As the recipe is very similar to the 0.7.3 version, I have created a common include file shared between the 0.7.3 version and the git version
* Updated the 0.7.3 recipe to use this include file and bumped the PRSigned-off-by Eyal Reizer <[email protected]>--- recipes/hostap/hostap-daemon-0.7.inc | 26 ++++ recipes/hostap/hostap-daemon-git/defconfig | 187 ++++++++++++++++++++++++++++ recipes/hostap/hostap-daemon_0.7.3.bb | 29 +---- recipes/hostap/hostap-daemon_git.bb | 16 +++ 4 files changed, 233 insertions(+), 25 deletions(-) create mode 100644 recipes/hostap/hostap-daemon-0.7.inc create mode 100644 recipes/hostap/hostap-daemon-git/defconfig create mode 100644 recipes/hostap/hostap-daemon_git.bbrecipes/hostap/hostap-daemon-0.7.inc new file +26
-0@@ -0,0 +1,26 @@ +HOMEPAGE = "http://hostap.epitest.fi" +SECTION = "kernel/userland" +PRIORITY = "optional" +LICENSE = "GPL" +DEPENDS = "libnl openssl" + +inherit update-rc.d +INITSCRIPT_NAME=hostapd + +do_configure() { + install -m 0644 ${WORKDIR}/defconfig ${S}/.config +} + +do_compile() { + make +} + +do_install() { + install -d ${D}${sbindir} ${D}${sysconfdir}/init.d + install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir} + install -m 0755 ${S}/hostapd ${D}${sbindir} + install -m 0755 ${S}/hostapd_cli ${D}${sbindir} + install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd +} + +CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"recipes/hostap/hostap-daemon-git/defconfig new file +3
-0@@ -0,0 +1,187 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used whenbuilding the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,recipes/hostap/hostap-daemon-git/defconfig new file +3
-0+# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBScan also
+# be modified from here. In most cass, these lines should use += in order notrecipes/hostap/hostap-daemon-git/defconfig new file +24
-0+# to override previous values of the variables. + +#CC=$(CROSS_COMPILE)gcc +#CFLAGS += -I$(NFSROOT)/include -DCONFIG_LIBNL20 +#CPPFLAGS += -DCONFIG_LIBNL20 +#LIBS += -L$(NFSROOT)/lib -lnl-genl +#LIBS_p += -L$(NFSROOT)/lib +#LIBDIR = $(NFSROOT)/lib +#BINDIR = $(NFSROOT)/usr/sbin + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +#CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +CONFIG_LIBNL20=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which maynot be
+# shipped with your distribution yet. If that is the case, you need to buildrecipes/hostap/hostap-daemon-git/defconfig new file +26
-0+# newer libnl version and point the hostapd build to use it. +#LIBNL=$(LIBNL_PATH) +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.recipes/hostap/hostap-daemon-git/defconfig new file +38
-0+# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
recipes/hostap/hostap-daemon-git/defconfig new file +13
-0+#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled withOpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session- ticket.patch)recipes/hostap/hostap-daemon-git/defconfig new file +15
-0+# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate filefrom
recipes/hostap/hostap-daemon-git/defconfig new file +4
-0+# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integratedEAP
recipes/hostap/hostap-daemon-git/defconfig new file +11
-0+# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi orFreeBSD/net80211)
recipes/hostap/hostap-daemon-git/defconfig new file +7
-0+#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +#CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably ifdebugging
recipes/hostap/hostap-daemon-git/defconfig new file +14
-0+# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove support for RADIUS accounting +#CONFIG_NO_ACCOUNTING=y + +# Remove support for RADIUS +#CONFIG_NO_RADIUS=y + +# Remove support for VLANs +#CONFIG_NO_VLAN=y + +# Remove support for dumping state into a file on SIGUSR1 signal +# This can be used to reduce binary size at the cost of disabling adebugging
recipes/hostap/hostap-daemon-git/defconfig new file +5
-0+# option. +#CONFIG_NO_DUMP_STATE=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations andreports
recipes/hostap/hostap-daemon-git/defconfig new file +9
-0+# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for thebacktraces
recipes/hostap/hostap-daemon-git/defconfig new file +9
-0+# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + + +recipes/hostap/hostap-daemon_0.7.3.bb +4
-6@@ -1,10 +1,8 @@ DESCRIPTION = "User space daemon for extended IEEE 802.11 management" -HOMEPAGE = "http://hostap.epitest.fi" -SECTION = "kernel/userland" -PRIORITY = "optional" -LICENSE = "GPL" -DEPENDS = "libnl openssl" -PR = "r2" + +require hostap-daemon-0.7.inc + +PR = "r3" DEFAULT_PREFERENCE = "-1"@@ -16,23 +14,4 @@ SRC_URI[sha256sum] ="
31eb2781f37e1a4c27969d1594f8019c0ca87779349c099ab812833289S = "${WORKDIR}/hostapd-${PV}/hostapd"
recipes/hostap/hostap-daemon_0.7.3.bb +0
-19-inherit update-rc.d -INITSCRIPT_NAME=hostapd - -do_configure() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config -} - -do_compile() { - make -} - -do_install() { - install -d ${D}${sbindir} ${D}${sysconfdir}/init.d - install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir} - install -m 0755 ${S}/hostapd ${D}${sbindir} - install -m 0755 ${S}/hostapd_cli ${D}${sbindir} - install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd -} -CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"recipes/hostap/hostap-daemon_git.bb new file +16
-1@@ -0,0 +1,16 @@ +DESCRIPTION = "User space daemon for extended IEEE 802.11 management" + +require hostap-daemon-0.7.inc + +PR = "r0" +SRCREV = "b8fb017272ed4794339978c9fbc0e74571a44728" + +DEFAULT_PREFERENCE = "-1" + +SRC_URI = "git://w1.fi/srv/git/hostap.git;protocol=git \ + file://defconfig \ + file://init" + +S = "${WORKDIR}/git/hostapd" + + --1.7.0.4
Re: Ping: [PATCHv2] hostap-daemon: build from git sources
In reply to Eyal ReizerHi,
Is there anything holding this patch from being pulled in?
Best Regards,
Eyal Reizer
Quoted 360 lines
-----Original Message-----
From: Reizer, Eyal
Sent: Friday, April 15, 2011 10:07 AM
To: [email protected]
Subject: Ping: [PATCHv2] hostap-daemon: build from git sourcesQuoted 70 lines
-----Original Message-----
From: Eyal Reizer [mailto:[email protected]]
Sent: Wednesday, April 13, 2011 1:08 PM
To: [email protected]
Cc: Reizer, Eyal
Subject: [PATCHv2] hostap-daemon: build from git sources* Builds a new version 0.8.x which is not released yet as a zip file. This version has new features like WIFI-direct used in new mac80211 versions
* As the recipe is very similar to the 0.7.3 version, I have created a common include file shared between the 0.7.3 version and the git version
* Updated the 0.7.3 recipe to use this include file and bumped the PRSigned-off-by Eyal Reizer <[email protected]>--- recipes/hostap/hostap-daemon-0.7.inc | 26 ++++ recipes/hostap/hostap-daemon-git/defconfig | 187 ++++++++++++++++++++++++++++ recipes/hostap/hostap-daemon_0.7.3.bb | 29 +---- recipes/hostap/hostap-daemon_git.bb | 16 +++ 4 files changed, 233 insertions(+), 25 deletions(-) create mode 100644 recipes/hostap/hostap-daemon-0.7.inc create mode 100644 recipes/hostap/hostap-daemon-git/defconfig create mode 100644 recipes/hostap/hostap-daemon_git.bbrecipes/hostap/hostap-daemon-0.7.inc new file +26
-0@@ -0,0 +1,26 @@ +HOMEPAGE = "http://hostap.epitest.fi" +SECTION = "kernel/userland" +PRIORITY = "optional" +LICENSE = "GPL" +DEPENDS = "libnl openssl" + +inherit update-rc.d +INITSCRIPT_NAME=hostapd + +do_configure() { + install -m 0644 ${WORKDIR}/defconfig ${S}/.config +} + +do_compile() { + make +} + +do_install() { + install -d ${D}${sbindir} ${D}${sysconfdir}/init.d + install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir} + install -m 0755 ${S}/hostapd ${D}${sbindir} + install -m 0755 ${S}/hostapd_cli ${D}${sbindir} + install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd +} + +CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"recipes/hostap/hostap-daemon-git/defconfig new file +3
-0@@ -0,0 +1,187 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used whenQuoted 2 lines
building the
+# hostapd binary. All lines starting with # are ignored.Configuration
recipes/hostap/hostap-daemon-git/defconfig
Quoted 6 lines
option
+# lines must be commented out complete, if they are not to be included, i.e.,recipes/hostap/hostap-daemon-git/defconfig new file +3
-0+# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS andLIBS
Quoted 17 lines
can also
+# be modified from here. In most cass, these lines should use += in order notrecipes/hostap/hostap-daemon-git/defconfig new file +14
-0+# to override previous values of the variables. + +#CC=$(CROSS_COMPILE)gcc +#CFLAGS += -I$(NFSROOT)/include -DCONFIG_LIBNL20 +#CPPFLAGS += -DCONFIG_LIBNL20 +#LIBS += -L$(NFSROOT)/lib -lnl-genl +#LIBS_p += -L$(NFSROOT)/lib +#LIBDIR = $(NFSROOT)/lib +#BINDIR = $(NFSROOT)/usr/sbin + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticatorrecipes/hostap/hostap-daemon-git/defconfig
Quoted 10 lines
recipes/hostap/hostap-daemon-git/defconfig new file +10
-0+#CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +CONFIG_LIBNL20=y +# driver_nl80211.c requires a rather new libnl (version 1.1) whichmay
Quoted 2 lines
not be
+# shipped with your distribution yet. If that is the case, you needto
Quoted 58 lines
build
recipes/hostap/hostap-daemon-git/defconfig new file +26
-0+# newer libnl version and point the hostapd build to use it. +#LIBNL=$(LIBNL_PATH) +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.recipes/hostap/hostap-daemon-git/defconfig new file +28
-0+# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP serverrecipes/hostap/hostap-daemon-git/defconfig
Quoted 10 lines
recipes/hostap/hostap-daemon-git/defconfig new file +10
-0+#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed forWPA-
Quoted 22 lines
PSK)
recipes/hostap/hostap-daemon-git/defconfig new file +13
-0+#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled withOpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session- ticket.patch)recipes/hostap/hostap-daemon-git/defconfig new file +5
-0+# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=yrecipes/hostap/hostap-daemon-git/defconfig
Quoted 10 lines
recipes/hostap/hostap-daemon-git/defconfig new file +10
-0+# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificatefile
recipes/hostap/hostap-daemon-git/defconfig
Quoted 5 lines
from
recipes/hostap/hostap-daemon-git/defconfig new file +4
-0+# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to theintegrated
Quoted 13 lines
EAP
recipes/hostap/hostap-daemon-git/defconfig new file +11
-0+# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi orFreeBSD/net80211)
recipes/hostap/hostap-daemon-git/defconfig
Quoted 6 lines
recipes/hostap/hostap-daemon-git/defconfig new file +6
-0+#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +#CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages tostdout.
Quoted 48 lines
+# This can be used to reduce the size of the hostapd considerably if debugging
recipes/hostap/hostap-daemon-git/defconfig new file +14
-0+# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove support for RADIUS accounting +#CONFIG_NO_ACCOUNTING=y + +# Remove support for RADIUS +#CONFIG_NO_RADIUS=y + +# Remove support for VLANs +#CONFIG_NO_VLAN=y + +# Remove support for dumping state into a file on SIGUSR1 signal +# This can be used to reduce binary size at the cost of disabling adebugging
recipes/hostap/hostap-daemon-git/defconfig new file +5
-0+# option. +#CONFIG_NO_DUMP_STATE=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations andreports
recipes/hostap/hostap-daemon-git/defconfig new file +9
-0+# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for thebacktraces
recipes/hostap/hostap-daemon-git/defconfig new file +9
-0+# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + + +recipes/hostap/hostap-daemon_0.7.3.bb +0
-0recipes/hostap/hostap-daemon_0.7.3.bb line 1
Quoted 1 line
recipes/hostap/hostap-daemon_0.7.3.bb +0
-0@@ -1,10 +1,8 @@ DESCRIPTION = "User space daemon for extended IEEE 802.11management"
Quoted 45 lines
recipes/hostap/hostap-daemon_0.7.3.bb +4
-6-HOMEPAGE = "http://hostap.epitest.fi" -SECTION = "kernel/userland" -PRIORITY = "optional" -LICENSE = "GPL" -DEPENDS = "libnl openssl" -PR = "r2" + +require hostap-daemon-0.7.inc + +PR = "r3" DEFAULT_PREFERENCE = "-1"@@ -16,23 +14,4 @@ SRC_URI[sha256sum] ="
31eb2781f37e1a4c27969d1594f8019c0ca87779349c099ab812833289S = "${WORKDIR}/hostapd-${PV}/hostapd"
recipes/hostap/hostap-daemon_0.7.3.bb +0
-19-inherit update-rc.d -INITSCRIPT_NAME=hostapd - -do_configure() { - install -m 0644 ${WORKDIR}/defconfig ${S}/.config -} - -do_compile() { - make -} - -do_install() { - install -d ${D}${sbindir} ${D}${sysconfdir}/init.d - install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir} - install -m 0755 ${S}/hostapd ${D}${sbindir} - install -m 0755 ${S}/hostapd_cli ${D}${sbindir} - install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd -} -CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"recipes/hostap/hostap-daemon_git.bb new file +0
-0recipes/hostap/hostap-daemon_git.bb line 1
Quoted 1 line
recipes/hostap/hostap-daemon_git.bb new file +1
-0@@ -0,0 +1,16 @@ +DESCRIPTION = "User space daemon for extended IEEE 802.11management"
Quoted 17 lines
recipes/hostap/hostap-daemon_git.bb new file +15
-1+ +require hostap-daemon-0.7.inc + +PR = "r0" +SRCREV = "b8fb017272ed4794339978c9fbc0e74571a44728" + +DEFAULT_PREFERENCE = "-1" + +SRC_URI = "git://w1.fi/srv/git/hostap.git;protocol=git \ + file://defconfig \ + file://init" + +S = "${WORKDIR}/git/hostapd" + + --1.7.0.4
Koen Kooi
NAK-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 9 lines · Eyal Reizer
* Builds a new version 0.8.x which is not released yet as a zip file. This version has new features like WIFI-direct used in new mac80211 versions
* As the recipe is very similar to the 0.7.3 version, I have created a common include file shared between the 0.7.3 version and the git version
* Updated the 0.7.3 recipe to use this include file and bumped the PRSigned-off-by Eyal Reizer <[email protected]>
NAK, 'git' is not a valid PV. '0.7.3+git' would be. -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFNrVWoMkyGM64RGpERAsfeAJ9sTrhaDQ820O+AsC3vb/6Ol76H9gCcCmyR dtS43YghO+HCu9fFCXHCd4s=
=fS50
-----END PGP SIGNATURE-----