Skip to contentSkip to conversation

dasher-gpe_0.0-svn: task configure fails with `Your intltool is too old.`

PATCH Paul Menzel 1 participant 1 message Apr 16, 2011

lore
Share & tools
lore
#0 lore raw

Dear OE folks,

bitbake dasher-gpe fails with the following error message.

checking whether make sets $(MAKE)... (cached) yes
checking for intltool >= 0.18... /oe/build-angstrom-next/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/dasher-gpe-0.0+svnr1251-r1/trunk/configure: line 2935: test: : integer expression expected
found. Your intltool is too old. You need intltool 0.18 or later.

With

        do_configure_prepend() {
        	rm -f m4/libtool.m4
        	intltoolize --force
        }

the problem seems to be that intltoolize --force creates an empty intltool-update.in.

/oe/build-angstrom-next/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/dasher-gpe-0.0+svnr1251-r1/trunk$ more intltool-update.in /oe/build-angstrom-next/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/dasher-gpe-0.0+svnr1251-r1/trunk$

Also the following message is printed in log.do_configure and I got it too running it directly.

        $ /oe/build-angstrom-next/angstrom-dev/sysroots/i686-linux/usr/bin/intltoolize --force
        You should add the contents of '/home/paul/oe/build-angstrom-next/angstrom-dev/sysroots/i686-linux/usr/share/aclocal/intltool.m4' to 'aclocal.m4'.

intltool-update.in is used m4/intltool.m4 to check the version.

        dnl AC_PROG_INTLTOOL([MINIMUM-VERSION])
        # serial 1 AC_PROG_INTLTOOL
        AC_DEFUN(AC_PROG_INTLTOOL,
        [
        
        if test -n "$1"; then
            AC_MSG_CHECKING(for intltool >= $1)
        
            INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ printf "%d", $[1] * 100 + $[2]; }'`
            INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { printf $[2]; }'  < ${srcdir}/intltool-update.in`
            changequote({{,}})
            INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split(${{2}}, VERSION, "."); printf "%d\n", VERSION[1] * 100 + VERSION[2];}' < ${srcdir}/intltool-update.in`
            changequote([,])
        
            if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT"; then
        	AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])
            else
        	AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found. Your intltool is too old.  You need intltool $1 or later.])
        	exit 1
            fi
        fi

But since intltool-update.in is empty this check fails.

Unfortunately I have no idea how to fix this properly. I used the attached patch, but the next problem turns up right away.

checking for style of include used by make... GNU
checking for arm-angstrom-linux-gnueabi-gcc... arm-angstrom-linux-gnueabi-gcc -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -mthumb-interwork -mno-thumb --sysroot=/oe/build-angstrom-next/angstrom-dev/sysroots/armv7a-angstrom-linux-gnueabi checking whether the C compiler works... no
configure: error: in `/oe/build-angstrom-next/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/dasher-gpe-0.0+svnr1251-r1/trunk':
configure: error: C compiler cannot create executables
See `config.log' for more details.

Unfortunately I could not find the original author to contact him.

        $ git log -p --follow -C -C -C -M recipes/dasher/ # is not sufficient

Additionally this the revision used in this recipe is over four years old, so maybe it should be removed if nobody care about dasher-gpe.

Thanks,

Paul

From 25aba4c2817c1282ac36cb359637339e9069e59f Mon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Sat, 16 Apr 2011 11:03:51 +0200
Subject: [PATCH] dasher: add patch for intl

checking whether make sets $(MAKE)... (cached) yes
checking for intltool >= 0.18... /home/paul/oe/build-angstrom-next/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/dasher-gpe-0.0+svnr1251-r1/trunk/configure: line 2935: test: : integer expression expected
found. Your intltool is too old. You need intltool 0.18 or later.

---
 ...4-intltool.m4-do-not-quit-on-faulty-check.patch |   27 ++++++++++++++++++++
 recipes/dasher/dasher-gpe_0.0-svn.bb               |    4 ++-
 2 files changed, 30 insertions(+), 1 deletions(-)
 create mode 100644 recipes/dasher/dasher-gpe/0001-m4-intltool.m4-do-not-quit-on-faulty-check.patch
recipes/dasher/dasher-gpe/0001-m4-intltool.m4-do-not-quit-on-faulty-check.patch new file +27 -0
new file mode 100644
index 0000000..7a89326
@@ -0,0 +1,27 @@
+From 1ef404f4585d3d7a311626655f6b31aea7ec728c Mon Sep 17 00:00:00 2001
+From: Paul Menzel <[email protected]>
+Date: Sat, 16 Apr 2011 14:02:08 +0200
+Subject: [PATCH] m4/intltool.m4: do not quit on faulty check
+
+
+Signed-off-by: Paul Menzel <[email protected]>
+---
+ m4/intltool.m4 |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/m4/intltool.m4 b/m4/intltool.m4
+index bdd2e33..f269675 100644
+--- a/m4/intltool.m4
++++ b/m4/intltool.m4
+@@ -40,7 +40,7 @@ if test -n "$1"; then
+ 	AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])
+     else
+ 	AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found. Your intltool is too old.  You need intltool $1 or later.])
+-	exit 1
++#	exit 1
+     fi
+ fi
+ 
+-- 
+1.7.4.4
+
recipes/dasher/dasher-gpe_0.0-svn.bb +3 -1
index a63c6e9..561c788 100644
@@ -5,7 +5,9 @@ SRCREV = "1251"
 DEPENDS = "libxsettings-client libglade libxtst gconf gtk+"
 SECTION = "gpe"
 SRC_URI = "svn://svn.gnome.org/svn/dasher;module=trunk;proto=http \
-	file://configure-lossage.patch"
+	file://configure-lossage.patch \
+	file://0001-m4-intltool.m4-do-not-quit-on-faulty-check.patch \
+	"
 
 S = "${WORKDIR}/trunk"
 FILES_${PN} += "${datadir}/dasher"
Signature · 1 line
1.7.4.4