Typo: change kenrel to kernel.
Subsystems (36)
PATCH v2 1/5 Typo: change kenrel to kernel.
The below patch is a resend due to rebasing to the current Mainline, in of which changes a typo "kenrel" to "kernel".
--- Documentation/feature-removal-schedule.txt | 2 +- drivers/media/video/saa7164/saa7164-encoder.c | 2 +- drivers/media/video/saa7164/saa7164-vbi.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
Documentation/feature-removal-schedule.txt +1 -1
@@ -226,7 +226,7 @@ Who: Zhang Rui <[email protected]> What: CONFIG_ACPI_PROCFS_POWER When: 2.6.39 Why: sysfs I/F for ACPI power devices, including AC and Battery, - has been working in upstream kenrel since 2.6.24, Sep 2007. + has been working in upstream kernel since 2.6.24, Sep 2007. In 2.6.37, we make the sysfs I/F always built in and this option disabled by default. Remove this option and the ACPI power procfs interface in 2.6.39.
drivers/media/video/saa7164/saa7164-encoder.c +1 -1
@@ -177,7 +177,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port) } } -/* Allocate some kenrel kernel buffers for copying +/* Allocate some kernel buffers for copying * to userpsace. */ len = params->numberoflines * params->pitch;
drivers/media/video/saa7164/saa7164-vbi.c +1 -1
@@ -148,7 +148,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port) } } -/* Allocate some kenrel kernel buffers for copying +/* Allocate some kernel buffers for copying * to userpsace. */ len = params->numberoflines * params->pitch;
Signature · 1 line
1.7.4.4
PATCH v2 2/5 Typo: change whetehr to whether.
The below patch is a resend due to rebasing to the current Mainline, fixing a typo whetehr to whether.
--- drivers/scsi/lpfc/lpfc_sli.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/scsi/lpfc/lpfc_sli.c +1 -1
@@ -3040,7 +3040,7 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,list_add_tail (&rspiocbp->list, &(pring->iocb_continueq)); pring->iocb_continueq_cnt++; -/* Now, determine whetehr the list is completed for processing */ +/* Now, determine whether the list is completed for processing */ irsp = &rspiocbp->iocb;if (irsp->ulpLe) {/*
Signature · 1 line
1.7.4.4
PATCH v2 3/5 Typo: Remove one to many ccc's in some comments.
In reply to Justin P. MattockThe below patch is a resend due to rebasing to the current Mainline, fixing some comments due to having one to many ccc's in the definitions.
--- arch/m68k/include/asm/MC68EZ328.h | 2 +- arch/m68k/include/asm/MC68VZ328.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/m68k/include/asm/MC68EZ328.h +1 -1
@@ -1047,7 +1047,7 @@ typedef volatile struct {#define WATCHDOG_EN 0x0001/* Watchdog Enabled */ #define WATCHDOG_ISEL 0x0002/* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occcured */ +#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occured */ #define WATCHDOG_CNT_MASK 0x0300/* Watchdog Counter */ #define WATCHDOG_CNT_SHIFT 8
arch/m68k/include/asm/MC68VZ328.h +1 -1
@@ -1143,7 +1143,7 @@ typedef struct {#define WATCHDOG_EN 0x0001/* Watchdog Enabled */ #define WATCHDOG_ISEL 0x0002/* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occcured */ +#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occured */ #define WATCHDOG_CNT_MASK 0x0300/* Watchdog Counter */ #define WATCHDOG_CNT_SHIFT 8
Signature · 1 line
1.7.4.4
Re: [PATCH 3/5 v2]Typo: Remove one to many ccc's in some comments.
Quoted 15 lines · On Sun, 17 Apr 2011 11:09:07 -0700 Justin P. Mattock wrote:
The below patch is a resend due to rebasing to the current Mainline, fixing some comments due to having one to many ccc's in the definitions.
Signed-off-by Justin P. Mattock <[email protected]>--- arch/m68k/include/asm/MC68EZ328.h | 2 +- arch/m68k/include/asm/MC68VZ328.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/m68k/include/asm/MC68EZ328.h +0
-0
arch/m68k/include/asm/MC68EZ328.h typedef volatile struct { · line 1050
Quoted 5 lines
arch/m68k/include/asm/MC68EZ328.h +1
-1@@ -1047,7 +1047,7 @@ typedef volatile struct {#define WATCHDOG_EN 0x0001/* Watchdog Enabled */ #define WATCHDOG_ISEL 0x0002/* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occcured */ +#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occured */
occurred
(above and below)
Quoted 8 lines
arch/m68k/include/asm/MC68EZ328.h +0
-0#define WATCHDOG_CNT_MASK 0x0300/* Watchdog Counter */ #define WATCHDOG_CNT_SHIFT 8arch/m68k/include/asm/MC68VZ328.h +0
-0
arch/m68k/include/asm/MC68VZ328.h typedef struct { · line 1148
Quoted 7 lines
arch/m68k/include/asm/MC68VZ328.h +1
-1@@ -1143,7 +1143,7 @@ typedef struct {#define WATCHDOG_EN 0x0001/* Watchdog Enabled */ #define WATCHDOG_ISEL 0x0002/* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occcured */ +#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occured */ #define WATCHDOG_CNT_MASK 0x0300/* Watchdog Counter */ #define WATCHDOG_CNT_SHIFT 8
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
Re: [PATCH 3/5 v2]Typo: Remove one to many ccc's in some comments.
Quoted 18 lines · Randy Dunlap
Quoted 16 lines · On Sun, 17 Apr 2011 11:09:07 -0700 Justin P. Mattock wrote:
The below patch is a resend due to rebasing to the current Mainline, fixing some comments due to having one to many ccc's in the definitions.
Signed-off-by Justin P. Mattock<[email protected]>--- arch/m68k/include/asm/MC68EZ328.h | 2 +- arch/m68k/include/asm/MC68VZ328.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/m68k/include/asm/MC68EZ328.h +0
-0@@ -1047,7 +1047,7 @@ typedef volatile struct {
Quoted 7 lines
arch/m68k/include/asm/MC68EZ328.h typedef volatile struct { · line 1050
Quoted 4 lines
arch/m68k/include/asm/MC68EZ328.h +1
-1#define WATCHDOG_EN 0x0001/* Watchdog Enabled */ #define WATCHDOG_ISEL 0x0002/* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occcured */ +#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occured */ occurred
(above and below)
yep!! made a mistake with this one, and resent..
Quoted 22 lines
Quoted 9 lines
arch/m68k/include/asm/MC68EZ328.h +0
-0#define WATCHDOG_CNT_MASK 0x0300/* Watchdog Counter */ #define WATCHDOG_CNT_SHIFT 8arch/m68k/include/asm/MC68VZ328.h +0
-0arch/m68k/include/asm/MC68VZ328.h typedef struct { · line 1148
Quoted 7 lines
arch/m68k/include/asm/MC68VZ328.h +1
-1@@ -1143,7 +1143,7 @@ typedef struct {#define WATCHDOG_EN 0x0001/* Watchdog Enabled */ #define WATCHDOG_ISEL 0x0002/* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occcured */ +#define WATCHDOG_INTF 0x0080/* Watchdog interrupt occured */ #define WATCHDOG_CNT_MASK 0x0300/* Watchdog Counter */ #define WATCHDOG_CNT_SHIFT 8---
~Randy
*** Remember to useDocumentation/SubmitChecklistwhen testing your code ***
PATCH v2 4/5 Typo: Remove one to many ttt's in some comments.
In reply to Justin P. MattockThe patch below is a resend due to rebasing to the current Mainline, fixing some comments with one to many ttt's in the comments.
--- arch/ia64/hp/common/sba_iommu.c | 2 +- drivers/firmware/efivars.c | 2 +- drivers/macintosh/therm_pm72.c | 4 ++-- drivers/media/dvb/dvb-usb/dw2102.c | 2 +- drivers/message/i2o/README.ioctl | 2 +- drivers/net/s2io.c | 2 +- drivers/net/ucc_geth_ethtool.c | 2 +- drivers/net/usb/usbnet.c | 2 +- drivers/scsi/lpfc/lpfc_hw.h | 2 +- drivers/tty/n_gsm.c | 2 +- drivers/usb/host/imx21-dbg.c | 2 +- drivers/usb/misc/usbtest.c | 2 +- fs/nfsd/stats.c | 2 +- fs/xfs/xfs_inode.c | 2 +- include/linux/posix-clock.h | 2 +- 15 files changed, 16 insertions(+), 16 deletions(-)
arch/ia64/hp/common/sba_iommu.c +1 -1
@@ -1063,7 +1063,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,/* ** Address does not fall w/in IOVA, must be bypassing */ -DBG_BYPASS ("sba_unmap_single_atttrs() bypass addr: 0x%lx\n" , +DBG_BYPASS ("sba_unmap_single_attrs() bypass addr: 0x%lx\n" , iova);#ifdef ENABLE_MARK_CLEAN
drivers/firmware/efivars.c +1 -1
@@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf)/* * Generic read/write functions that call the specific functions of -* the atttributes... +* the attributes... */ static ssize_t efivar_attr_show (struct kobject *kobj,struct attribute *attr,char *buf)
drivers/macintosh/therm_pm72.c +2 -2
@@ -44,11 +44,11 @@* TODO: - Check MPU structure version/signature * - Add things like /sbin/overtemp for non-critical * overtemp conditions so userland can take some policy -* decisions, like slewing down CPUs +* decisions, like slowing down CPUs * - Deal with fan and i2c failures in a better way * - Maybe do a generic PID based on params used for * U3 and Drives ? Definitely need to factor code a bit -* bettter... also make sensor detection more robust using +* better... also make sensor detection more robust using * the device-tree to probe for them * - Figure out how to get the slots consumption and set the * slots fan accordingly
drivers/media/dvb/dvb-usb/dw2102.c +1 -1
@@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = { { 0x0f, KEY_BLUE }, /* bottom yellow button */ { 0x14, KEY_AUDIO }, /* Snapshot */ { 0x38, KEY_TV }, /* TV/Radio */ - { 0x0c, KEY_ESC } /* upper Red buttton */ + { 0x0c, KEY_ESC } /* upper Red button */ };static struct rc_map_dvb_usb_table_table keys_tables[] = {
drivers/message/i2o/README.ioctl +1 -1
@@ -110,7 +110,7 @@ V. Getting Logical Configuration Table ENOBUFS Buffer not large enough. If this occurs, the required buffer length is written into *(lct->reslen) -VI. Settting Parameters +VI. Setting Parameters SYNOPSIS
drivers/net/s2io.c +1 -1
@@ -7231,7 +7231,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io)/* As per the HW requirement we need to replenish the * receive buffer to avoid the ring bump. Since there is * no intention of processing the Rx frame at this pointwe are -* just settting the ownership bit of rxd in Each Rx +* just setting the ownership bit of rxd in Each Rx * ring to HW and set the appropriate buffer size * based on the ring mode */
drivers/net/ucc_geth_ethtool.c +1 -1
@@ -6,7 +6,7 @@* Author: Li Yang <[email protected]> * * Limitation: -* Can only get/set setttings of the first queue. +* Can only get/set settings of the first queue. * Need to re-open the interface manually after changing some parameters. * * This program is free software; you can redistribute it and/or modify it
drivers/net/usb/usbnet.c +1 -1
@@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)/* take the first altsetting with in-bulk + out-bulk; * remember any status endpoint, just in case; -* ignore other endpoints and altsetttings. +* ignore other endpoints and altsettings. */ for (ep =0 ; ep < alt->desc.bNumEndpoints; ep++) {struct usb_host_endpoint *e;
drivers/scsi/lpfc/lpfc_hw.h +1 -1
@@ -1002,7 +1002,7 @@ typedef struct _ELS_PKT { /* Structure is in Big Endian format */#define SLI_MGMT_GRPL 0x102/* Get registered Port list */ #define SLI_MGMT_GPAT 0x110/* Get Port attributes */ #define SLI_MGMT_RHBA 0x200/* Register HBA */ -#define SLI_MGMT_RHAT 0x201/* Register HBA atttributes */ +#define SLI_MGMT_RHAT 0x201/* Register HBA attributes */ #define SLI_MGMT_RPRT 0x210/* Register Port */ #define SLI_MGMT_RPA 0x211/* Register Port attributes */ #define SLI_MGMT_DHBA 0x300/* De-register HBA */
drivers/tty/n_gsm.c +1 -1
@@ -2124,7 +2124,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)/** * gsmld_detach_gsm - stop doing 0710 mux -* @tty: tty atttached to the mux +* @tty: tty attached to the mux * @gsm: mux * * Shutdown and then clean up the resources used by the line discipline
drivers/usb/host/imx21-dbg.c +1 -1
@@ -384,7 +384,7 @@ static void debug_isoc_show_one(struct seq_file *s, seq_printf(s, "%s %d:\n" "cc=0X%02X\n" "scheduled frame %d (%d)\n" - "submittted frame %d (%d)\n" + "submitted frame %d (%d)\n" "completed frame %d (%d)\n" "requested length=%d\n" "completed length=%d\n\n",
drivers/usb/misc/usbtest.c +1 -1
@@ -104,7 +104,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) alt = intf->altsetting + tmp;/* take the first altsetting with in-bulk + out-bulk; -* ignore other endpoints and altsetttings. +* ignore other endpoints and altsettings. */ for (ep =0 ; ep < alt->desc.bNumEndpoints; ep++) {struct usb_host_endpoint *e;
fs/nfsd/stats.c +1 -1
@@ -8,7 +8,7 @@* Statistsics for the reply cache * fh <stale> <total-lookups> <anonlookups> <dir-not-in-dcache> <nondir-not-in-dcache> * statistics for filehandle lookup -* io <bytes-read> <bytes-writtten> +* io <bytes-read> <bytes-written> * statistics for IO throughput * th <threads> <fullcnt> <10%-20%> <20%-30%> ... <90%-100%> <100%> * time (seconds) when nfsd thread usage above thresholds
fs/xfs/xfs_inode.c +1 -1
@@ -1470,7 +1470,7 @@ xfs_itruncate_finish(* file but the log buffers containing the free and reallocation * don't, then we'd end up with garbage in the blocks being freed. * As long as we make the new_size permanent before actually -* freeing any blocks it doesn't matter if they get writtten to. +* freeing any blocks it doesn't matter if they get written to. * * The callers must signal into us whether or not the size * setting here must be synchronous. There are a few cases
include/linux/posix-clock.h +1 -1
@@ -44,7 +44,7 @@ struct posix_clock;* @timer_create: Create a new timer * @timer_delete: Remove a previously created timer * @timer_gettime: Get remaining time and interval of a timer -* @timer_setttime: Set a timer's initial expiration and interval +* @timer_settime: Set a timer's initial expiration and interval * @fasync: Optional character device fasync method * @mmap: Optional character device mmap method * @open: Optional character device open method
Signature · 1 line
1.7.4.4
PATCH v2 5/5 Typo: Remove one to many sss's in the some comments.
In reply to Justin P. MattockThe patch below is a resend due to rebasing to the current Mainline, fixing some comments with to many sss's in the comments.
--- .../devicetree/bindings/powerpc/nintendo/wii.txt | 2 +- arch/arm/mach-msm/include/mach/msm_iomap.h | 2 +- arch/arm/mach-omap2/control.h | 2 +- arch/powerpc/include/asm/pte-hash64-64k.h | 2 +- arch/powerpc/kernel/kgdb.c | 2 +- arch/x86/xen/pci-swiotlb-xen.c | 2 +- drivers/acpi/acpica/utresrc.c | 2 +- drivers/acpi/video.c | 2 +- drivers/media/video/msp3400-driver.c | 2 +- drivers/net/can/pch_can.c | 2 +- drivers/net/irda/ali-ircc.c | 2 +- drivers/net/wan/pc300_drv.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++---- drivers/net/wireless/ipw2x00/ipw2200.c | 2 +- drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c | 2 +- drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h | 2 +- drivers/scsi/constants.c | 2 +- drivers/scsi/esp_scsi.c | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 2 +- drivers/scsi/nsp32_debug.c | 2 +- drivers/scsi/pcmcia/nsp_debug.c | 2 +- drivers/scsi/qla4xxx/ql4_mbx.c | 2 +- drivers/staging/bcm/Ioctl.h | 12 ++++++------ drivers/staging/cxt1e1/libsbew.h | 2 +- drivers/staging/rt2860/rtmp.h | 2 +- fs/btrfs/relocation.c | 2 +- fs/freevxfs/vxfs_inode.c | 2 +- fs/squashfs/Kconfig | 4 ++-- fs/squashfs/cache.c | 2 +- include/net/genetlink.h | 2 +- include/net/netlink.h | 2 +- net/sunrpc/xprtrdma/svc_rdma_transport.c | 2 +- 32 files changed, 41 insertions(+), 41 deletions(-)
Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +1 -1
@@ -127,7 +127,7 @@ Nintendo Wii device tree - reg : should contain the SDHCI registers location and length - interrupts : should contain the SDHCI interrupt -1.j) The Inter-Processsor Communication (IPC) node +1.j) The Inter-Processor Communication (IPC) node Represent the Inter-Processor Communication interface. This interface enables communications between the Broadway and the Starlet processors.
arch/arm/mach-msm/include/mach/msm_iomap.h +1 -1
@@ -55,7 +55,7 @@#include "msm_iomap-8960.h" -/* Virtual addressses shared across all MSM targets. */ +/* Virtual addresses shared across all MSM targets. */ #define MSM_CSR_BASE IOMEM(0xE0001000)#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000)#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000)
arch/arm/mach-omap2/control.h +1 -1
@@ -236,7 +236,7 @@#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018) -/* 36xx-only RTA - Retention till Accesss control registers and bits */ +/* 36xx-only RTA - Retention till Access control registers and bits */ #define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C#define OMAP36XX_RTA_DISABLE 0x0
arch/powerpc/include/asm/pte-hash64-64k.h +1 -1
@@ -22,7 +22,7 @@#define _PAGE_HASHPTE _PAGE_HPTE_SUB/* Note the full page bits must be in the same location as for normal -* 4k pages as the same asssembly will be used to insert 64K pages +* 4k pages as the same assembly will be used to insert 64K pages * wether the kernel has CONFIG_PPC_64K_PAGES or not */ #define _PAGE_F_SECOND 0x00008000/* full page: hidx bits */
arch/powerpc/kernel/kgdb.c +1 -1
@@ -142,7 +142,7 @@ static int kgdb_singlestep(struct pt_regs *regs)return 0 ;/* -* On Book E and perhaps other processsors, singlestep is handled on +* On Book E and perhaps other processors, singlestep is handled on * the critical exception stack. This causes current_thread_info() * to fail, since it it locates the thread_info by masking off * the low bits of the current stack pointer. We work around
arch/x86/xen/pci-swiotlb-xen.c +1 -1
@@ -36,7 +36,7 @@ int __init pci_xen_swiotlb_detect(void)/* If running as PV guest, either iommu=soft, or swiotlb=force will * activate this IOMMU. If running as PV privileged, activate it -* irregardlesss. +* irregardless. */ if ((xen_initial_domain () || swiotlb || swiotlb_force) && (xen_pv_domain ()))
drivers/acpi/acpica/utresrc.c +1 -1
@@ -50,7 +50,7 @@ ACPI_MODULE_NAME("utresrc")#if defined(ACPI_DISASSEMBLER ) || defined (ACPI_DEBUGGER )/* * Strings used to decode resource descriptors. -* Used by both the disasssembler and the debugger resource dump routines +* Used by both the disassembler and the debugger resource dump routines */ const char *acpi_gbl_bm_decode[] = { "NotBusMaster",
drivers/acpi/video.c +1 -1
@@ -1521,7 +1521,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)acpi_bus_generate_proc_event (device, event,0 ); keycode =KEY_BRIGHTNESSDOWN ;break ; -case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS :/* zero brightnesss */ +case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS :/* zero brightness */ if (brightness_switch_enabled)acpi_video_switch_brightness (video_device, event);acpi_bus_generate_proc_event (device, event,0 );
drivers/media/video/msp3400-driver.c +1 -1
@@ -96,7 +96,7 @@ MODULE_PARM_DESC(debug, "Enable debug messages [0-3]");MODULE_PARM_DESC (stereo_threshold,"Sets signal threshold to activate stereo" );MODULE_PARM_DESC (standard,"Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect" );MODULE_PARM_DESC (amsound,"Hardwire AM sound at 6.5Hz (France), FM can autoscan" ); -MODULE_PARM_DESC (dolby,"Activates Dolby processsing" ); +MODULE_PARM_DESC (dolby,"Activates Dolby processing" );/* ---------------------------------------------------------------------- */
drivers/net/can/pch_can.c +1 -1
@@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota)u16 data_reg; do { - /* Reading the messsage object from the Message RAM */ + /* Reading the message object from the Message RAM */ iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask); pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
drivers/net/irda/ali-ircc.c +1 -1
@@ -1800,7 +1800,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) MessageCount =inb (iobase+FIR_LSR )&0x07 ;if (MessageCount >0 ) -IRDA_DEBUG (0 ,"%s(), Messsage count = %d,\n" , __func__ , MessageCount); +IRDA_DEBUG (0 ,"%s(), Message count = %d,\n" , __func__ , MessageCount);for (i=0 ; i<=MessageCount; i++) {
drivers/net/wan/pc300_drv.c +1 -1
@@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch)* Description: In the remote loopback mode the clock and data recovered * from the line inputs RL1/2 or RDIP/RDIN are routed back * to the line outputs XL1/2 or XDOP/XDON via the analog -* transmitter. As in normal mode they are processsed by +* transmitter. As in normal mode they are processed by * the synchronizer and then sent to the system interface. *---------------------------------------------------------------------------- */
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +4 -4
@@ -3329,26 +3329,26 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,else cptr =AR9300_BASE_ADDR ;ath_dbg (common,ATH_DBG_EEPROM , -"Trying EEPROM accesss at Address 0x%04x\n" , cptr); +"Trying EEPROM access at Address 0x%04x\n" , cptr);if (ar9300_check_eeprom_header (ah, read, cptr)) goto found; cptr =AR9300_BASE_ADDR_512 ;ath_dbg (common,ATH_DBG_EEPROM , -"Trying EEPROM accesss at Address 0x%04x\n" , cptr); +"Trying EEPROM access at Address 0x%04x\n" , cptr);if (ar9300_check_eeprom_header (ah, read, cptr)) goto found; read = ar9300_read_otp; cptr =AR9300_BASE_ADDR ;ath_dbg (common,ATH_DBG_EEPROM , -"Trying OTP accesss at Address 0x%04x\n" , cptr); +"Trying OTP access at Address 0x%04x\n" , cptr);if (ar9300_check_eeprom_header (ah, read, cptr)) goto found; cptr =AR9300_BASE_ADDR_512 ;ath_dbg (common,ATH_DBG_EEPROM , -"Trying OTP accesss at Address 0x%04x\n" , cptr); +"Trying OTP access at Address 0x%04x\n" , cptr);if (ar9300_check_eeprom_header (ah, read, cptr)) goto found;
drivers/net/wireless/ipw2x00/ipw2200.c +1 -1
@@ -7430,7 +7430,7 @@ static int ipw_associate_network(struct ipw_priv *priv, priv->assoc_request.capability &= ~cpu_to_le16 (WLAN_CAPABILITY_SHORT_SLOT_TIME ); - IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, " + IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, " "802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n", roaming ? "Rea" : "A", print_ssid(ssid, priv->essid, priv->essid_len),
drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c +1 -1
@@ -1,5 +1,5 @@/* -* Aic7xxx SCSI host adapter firmware asssembler symbol table implementation +* Aic7xxx SCSI host adapter firmware assembler symbol table implementation * * Copyright (c) 1997 Justin T. Gibbs. * Copyright (c) 2002 Adaptec Inc.
drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h +1 -1
@@ -1,5 +1,5 @@/* -* Aic7xxx SCSI host adapter firmware asssembler symbol table definitions +* Aic7xxx SCSI host adapter firmware assembler symbol table definitions * * Copyright (c) 1997 Justin T. Gibbs. * Copyright (c) 2002 Adaptec Inc.
drivers/scsi/constants.c +1 -1
@@ -34,7 +34,7 @@static const char * cdb_byte0_names[] = {/* 00-03 */ "Test Unit Ready" ,"Rezero Unit/Rewind" ,NULL ,"Request Sense" ,/* 04-07 */ "Format Unit/Medium" ,"Read Block Limits" ,NULL , -"Reasssign Blocks" , +"Reassign Blocks" ,/* 08-0d */ "Read(6)" ,NULL ,"Write(6)" ,"Seek(6)" ,NULL ,NULL ,/* 0e-12 */ NULL ,"Read Reverse" ,"Write Filemarks" ,"Space" ,"Inquiry" ,/* 13-16 */ "Verify(6)" ,"Recover Buffered Data" ,"Mode Select(6)" ,
drivers/scsi/esp_scsi.c +1 -1
@@ -1059,7 +1059,7 @@ static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp, esp->ops->send_dma_cmd (esp, esp->command_block_dma,2 ,2 ,1 ,ESP_CMD_DMA |ESP_CMD_TI ); -/* ACK the msssage. */ +/* ACK the message. */ scsi_esp_cmd (esp,ESP_CMD_MOK );for (i =0 ; i <ESP_RESELECT_TAG_LIMIT ; i++) {
drivers/scsi/lpfc/lpfc_attr.c +1 -1
@@ -4532,7 +4532,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)* * This function is called by the lpfc_get_cfgparam() routine to set the * module lpfc_log_verbose into the @phba cfg_log_verbose for use with -* log messsage according to the module's lpfc_log_verbose parameter setting +* log message according to the module's lpfc_log_verbose parameter setting * before hba port or vport created. **/ static void
drivers/scsi/nsp32_debug.c +1 -1
@@ -13,7 +13,7 @@ static const char unknown[] = "UNKNOWN";static const char * group_0_commands[] = {/* 00-03 */ "Test Unit Ready" ,"Rezero Unit" , unknown,"Request Sense" , -/* 04-07 */ "Format Unit" ,"Read Block Limits" , unknown,"Reasssign Blocks" , +/* 04-07 */ "Format Unit" ,"Read Block Limits" , unknown,"Reassign Blocks" ,/* 08-0d */ "Read (6)" , unknown,"Write (6)" ,"Seek (6)" , unknown, unknown,/* 0e-12 */ unknown,"Read Reverse" ,"Write Filemarks" ,"Space" ,"Inquiry" ,/* 13-16 */ unknown,"Recover Buffered Data" ,"Mode Select" ,"Reserve" ,
drivers/scsi/pcmcia/nsp_debug.c +1 -1
@@ -15,7 +15,7 @@ static const char unknown[] = "UNKNOWN";static const char * group_0_commands[] = {/* 00-03 */ "Test Unit Ready" ,"Rezero Unit" , unknown,"Request Sense" , -/* 04-07 */ "Format Unit" ,"Read Block Limits" , unknown,"Reasssign Blocks" , +/* 04-07 */ "Format Unit" ,"Read Block Limits" , unknown,"Reassign Blocks" ,/* 08-0d */ "Read (6)" , unknown,"Write (6)" ,"Seek (6)" , unknown, unknown,/* 0e-12 */ unknown,"Read Reverse" ,"Write Filemarks" ,"Space" ,"Inquiry" ,/* 13-16 */ unknown,"Recover Buffered Data" ,"Mode Select" ,"Reserve" ,
drivers/scsi/qla4xxx/ql4_mbx.c +1 -1
@@ -19,7 +19,7 @@* @mbx_cmd: data pointer for mailbox in registers. * @mbx_sts: data pointer for mailbox out registers. * -* This routine isssue mailbox commands and waits for completion. +* This routine issue mailbox commands and waits for completion. * If outCount is 0, this routine completes successfully WITHOUT waiting * for the mailbox command to complete. **/
drivers/staging/bcm/Ioctl.h +6 -6
@@ -303,14 +303,14 @@ typedef enum _SECTION_TYPE }SECTION_TYPE , *PSECTION_TYPE ;/* -* This section provide the complete bitmap of the Flash. -* using this map lib/APP will isssue read/write command. +This section provide the complete bitmap of the Flash. +using this map lib/APP will issue read/write command. Fields are defined as : Bit [0] = section is present //1:present, 0: Not present -* Bit [1] = section is valid //1: valid, 0: not valid -* Bit [2] = Section is R/W //0: RW, 1: RO -* Bit [3] = Section is Active or not 1 means Active, 0->inactive -* Bit [7...3] = Reserved +Bit [1] = section is valid //1: valid, 0: not valid +Bit [2] = Section is R/W //0: RW, 1: RO +Bit [3] = Section is Active or not 1 means Active, 0->inactive +Bit [7...3] = Reserved */ typedef struct _FLASH2X_BITMAP
drivers/staging/cxt1e1/libsbew.h +1 -1
@@ -323,7 +323,7 @@ struct sbecom_port_param#define CFG_CH_DINV_TX 0x02 -/* Posssible resettable chipsets/functions */ +/* Possible resettable chipsets/functions */ #define RESET_DEV_TEMUX 1#define RESET_DEV_TECT3 RESET_DEV_TEMUX#define RESET_DEV_PLL 2
drivers/staging/rt2860/rtmp.h +1 -1
@@ -2208,7 +2208,7 @@ struct rt_tx_blk {/* Following structure used for the characteristics of a specific packet. */ void *pPacket;u8 *pSrcBufHeader;/* Reference to the head of sk_buff->data */ -u8 *pSrcBufData;/* Reference to the sk_buff->data, will change depending on the handling progresss */ +u8 *pSrcBufData;/* Reference to the sk_buff->data, will change depending on the handling progress */ u32 SrcBufLen;/* Length of packet payload which not including Layer 2 header */ u8 *pExtraLlcSnapEncap;/* NULL means no extra LLC/SNAP is required */ u8 HeaderBuf[128 ];/* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */
fs/btrfs/relocation.c +1 -1
@@ -709,7 +709,7 @@ again:WARN_ON (cur->checked);if (!list_empty (&cur->upper)) {/* -* the backref was added previously when processsing +* the backref was added previously when processing * backref of type BTRFS_TREE_BLOCK_REF_KEY */ BUG_ON (!list_is_singular (&cur->upper));
fs/freevxfs/vxfs_inode.c +1 -1
@@ -272,7 +272,7 @@ vxfs_get_fake_inode(struct super_block *sbp, struct vxfs_inode_info *vip)* *ip: VFS inode * * Description: -* vxfs_put_fake_inode frees all data asssociated with @ip. +* vxfs_put_fake_inode frees all data associated with @ip. */ void vxfs_put_fake_inode (struct inode *ip)
fs/squashfs/Kconfig +2 -2
@@ -42,7 +42,7 @@ config SQUASHFS_LZO select LZO_DECOMPRESS help Saying Y here includes support for reading Squashfs file systems - compressed with LZO compresssion. LZO compression is mainly + compressed with LZO compression. LZO compression is mainly aimed at embedded systems with slower CPUs where the overheads of zlib are too high.
@@ -57,7 +57,7 @@ config SQUASHFS_XZ select XZ_DEC help Saying Y here includes support for reading Squashfs file systems - compressed with XZ compresssion. XZ gives better compression than + compressed with XZ compression. XZ gives better compression than the default zlib compression, at the expense of greater CPU and memory overhead.
fs/squashfs/cache.c +1 -1
@@ -29,7 +29,7 @@* plus functions layered ontop of the generic cache implementation to * access the metadata and fragment caches. * -* To avoid out of memory and fragmentation isssues with vmalloc the cache +* To avoid out of memory and fragmentation issues with vmalloc the cache * uses sequences of kmalloced PAGE_CACHE_SIZE buffers. * * It should be noted that the cache is not used for file datablocks, these
include/net/genetlink.h +1 -1
@@ -260,7 +260,7 @@ static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info)/** * gennlmsg_data - head of message payload -* @gnlh: genetlink messsage header +* @gnlh: genetlink message header */ static inline void *genlmsg_data (const struct genlmsghdr *gnlh) {
include/net/netlink.h +1 -1
@@ -290,7 +290,7 @@ static inline int nlmsg_padlen(int payload)/** * nlmsg_data - head of message payload -* @nlh: netlink messsage header +* @nlh: netlink message header */ static inline void *nlmsg_data (const struct nlmsghdr *nlh) {
net/sunrpc/xprtrdma/svc_rdma_transport.c +1 -1
@@ -333,7 +333,7 @@ static void rq_cq_reap(struct svcxprt_rdma *xprt) }/* -* Processs a completion context +* Process a completion context */ static void process_context (struct svcxprt_rdma *xprt,struct svc_rdma_op_ctxt *ctxt)
Signature · 1 line
1.7.4.4
Quoted 2 lines · Justin P. Mattock
The below patch is a resend due to rebasing to the current Mainline, in of which changes a typo "kenrel" to "kernel".
I have folded all the patches into one, dropped the staging/ bits (which wouldn't apply in -next anyway), and applied.
Signature · 2 lines
Jiri Kosina SUSE Labs
Quoted 8 lines · Jiri Kosina
Quoted 2 lines · Justin P. Mattock
The below patch is a resend due to rebasing to the current Mainline, in of which changes a typo "kenrel" to "kernel".
I have folded all the patches into one, dropped the staging/ bits (which wouldn't apply in -next anyway), and applied.
o.k... thanks for picking those up.. if I run into any others I will send them on up..
Justin P. Mattock