Skip to contentSkip to conversation

qt4-libs-native: add initial recipe

PATCH In review Simon Busch 2 participants 15 messages May 7, 2011 – May 9, 2011

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 qt4-libs-native: add initial recipe

The native version of the qt4 libraries is needed by some other native recipes to build. It's mostly a copy of the qt4-tools-native recipes with some changed configuration optons and is only available for version 4.7.2 now.

---
 recipes/qt4/qt4-libs-native.inc      |   67 ++++++++++++++++++++++++++++++++++
 recipes/qt4/qt4-libs-native_4.7.2.bb |   19 ++++++++++
 2 files changed, 86 insertions(+), 0 deletions(-)
 create mode 100644 recipes/qt4/qt4-libs-native.inc
 create mode 100644 recipes/qt4/qt4-libs-native_4.7.2.bb
recipes/qt4/qt4-libs-native.inc new file +67 -0
new file mode 100644
index 0000000..7d2116a
@@ -0,0 +1,67 @@
+DESCRIPTION = "Native libraries for Qt/[X11|Mac|Embedded] version 4.x"
+DEPENDS = "zlib-native dbus-native"
+SECTION = "libs"
+HOMEPAGE = "http://www.trolltech.com"
+PRIORITY = "optional"
+LICENSE = "GPL"
+
+INC_PR = "r0"
+
+inherit native
+
+SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-everywhere-opensource-src-${PV}.tar.gz \
+           file://qt-config.patch \
+           file://g++.conf \
+           file://linux.conf"
+S = "${WORKDIR}/qt-everywhere-opensource-src-${PV}"
+
+EXTRA_OECONF = "-prefix ${prefix} \
+                -L ${STAGING_LIBDIR_NATIVE} \
+                -I ${STAGING_INCDIR_NATIVE} \
+                -qt-libjpeg -qt-gif -system-zlib \
+                -no-libjpeg -no-libpng -no-libmng -no-libtiff \
+                -no-accessibility \
+                -no-cups \
+                -no-nas-sound \
+                -no-nis -no-openssl \
+                -verbose -release \
+                -embedded -no-freetype -no-glib -no-iconv \
+                -exceptions -xmlpatterns \
+                -qt3support"
+
+# yank default -e, otherwise we get the following error:
+# moc_qbuffer.cpp: No such file or directory
+EXTRA_OEMAKE = " "
+
+do_configure() {
+   (echo o; echo yes) | ./configure ${EXTRA_OECONF} || die "Configuring qt failed. EXTRA_OECONF was ${EXTRA_OECONF}"
+}
+
+TOBUILD = "\
+  src/tools/moc \
+  src/corelib \
+  src/sql \
+  src/xml \
+  src/network \
+  src/tools/uic \
+  src/tools/rcc \
+  src/xmlpatterns \
+  src/dbus \
+  src/gui \
+  src/testlib \
+  src/qt3support \
+"
+
+do_compile() {
+    for i in ${TOBUILD}; do
+        cd ${S}/$i && oe_runmake CC="${CC}" CXX="${CXX}"
+    done
+}
+
+NATIVE_INSTALL_WORKS = "1"
+
+do_install() {
+    for i in ${TOBUILD}; do
+        cd ${S}/$i && oe_runmake install INSTALL_ROOT=${D}
+    done
+}
recipes/qt4/qt4-libs-native_4.7.2.bb new file +19 -0
new file mode 100644
index 0000000..23c5632
@@ -0,0 +1,19 @@
+require qt4-libs-native.inc
+LICENSE = "LGPLv2.1 GPLv3"
+
+PR = "${INC_PR}.0"
+
+# Find the g++.conf/linux.conf in the right directory.
+FILESPATHPKG =. "qt-${PV}:"
+SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-everywhere-opensource-src-${PV}.tar.gz \
+           file://qt-config.patch \
+           file://g++.conf \
+           file://linux.conf"
+S = "${WORKDIR}/qt-everywhere-opensource-src-${PV}"
+
+EXTRA_OECONF += " -no-fast -silent -no-rpath"
+
+TOBUILD := "src/tools/bootstrap ${TOBUILD}"
+
+SRC_URI[md5sum] = "66b992f5c21145df08c99d21847f4fdb"
+SRC_URI[sha256sum] = "d4783b524b90bcd270ccf6e7a30d5fb51696c47eb5de49ebc2d553cd3eb49336"
Signature · 1 line
1.7.4.1
#1 lore raw
Quoted 3 lines · Simon Busch

The native version of the qt4 libraries is needed by some other native recipes to build. It's mostly a copy of the qt4-tools-native recipes with some changed configuration optons and is only available for version 4.7.2 now.

I second this idea since I will be a user of it but seems better to me to have a full qt4-native since this would reduce build duplication time, no?

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#2 lore raw
Quoted 8 lines · Otavio Salvador
Quoted 3 lines · Simon Busch

The native version of the qt4 libraries is needed by some other native recipes to build. It's mostly a copy of the qt4-tools-native recipes with some changed configuration optons and is only available for version 4.7.2 now.

I second this idea since I will be a user of it but seems better to me to have a full qt4-native since this would reduce build duplication time, no?

You are right. As qt4-libs-native and qt4-tools-native are build mostly the same stuff we could merge them and create a qt4-native recipe if nobody else has any concerns. I will provide a patch for this.

regards,
Simon

#3 lore raw
Quoted 6 lines · Simon Busch
Quoted 5 lines · Otavio Salvador
Quoted 3 lines · Simon Busch

The native version of the qt4 libraries is needed by some other native recipes to build. It's mostly a copy of the qt4-tools-native recipes with some changed configuration optons and is only available for version 4.7.2 now.

Quoted 7 lines
Quoted 3 lines

I second this idea since I will be a user of it but seems better to me to have a full qt4-native since this would reduce build duplication time, no?

You are right. As qt4-libs-native and qt4-tools-native are build mostly the same stuff we could merge them and create a qt4-native recipe if nobody else has any concerns. I will provide a patch for this.

IMO you might try to make it on qt4-x11-free recipe and add a provides for the tools.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#4 lore raw
Quoted 11 lines · Otavio Salvador
Quoted 10 lines · Simon Busch
Quoted 8 lines · Otavio Salvador
Quoted 3 lines · Simon Busch

The native version of the qt4 libraries is needed by some other native recipes to build. It's mostly a copy of the qt4-tools-native recipes with some changed configuration optons and is only available for version 4.7.2 now.

I second this idea since I will be a user of it but seems better to me to have a full qt4-native since this would reduce build duplication time, no?

Quoted 6 lines
Quoted 3 lines

You are right. As qt4-libs-native and qt4-tools-native are build mostly the same stuff we could merge them and create a qt4-native recipe if nobody else has any concerns. I will provide a patch for this.

IMO you might try to make it on qt4-x11-free recipe and add a provides for the tools.

Hm, I need it for the embedded variant of qt4 so we should add it to qt4.inc which is already quite complex and very target specific. I think the best option is to create a qt4-native recipe which provides both qt4-tools-native and qt4-libs-native. This would even be the best option to be backward compatible (some stuff in OE is depending on qt4-native-tools in different versions).

regards,
Simon

#5 lore raw

PATCH 1/1 qt4-native: introduce the native version of qt4

The new recipe is based on the qt4-tool-native one but it even installs the libraries of qt4 and not only the tools like moc/rcc. It will not increase the build time as most libraries are already build for the qt4-tool-native but not staged.

---
 recipes/qt4/qt4-native.inc      |   68 +++++++++++++++++++++++++++++++++++++++
 recipes/qt4/qt4-native_4.7.2.bb |   19 +++++++++++
 2 files changed, 87 insertions(+), 0 deletions(-)
 create mode 100644 recipes/qt4/qt4-native.inc
 create mode 100644 recipes/qt4/qt4-native_4.7.2.bb
recipes/qt4/qt4-native.inc new file +68 -0
new file mode 100644
index 0000000..ee702e9
@@ -0,0 +1,68 @@
+DESCRIPTION = "Native version Qt/[X11|Mac|Embedded]"
+DEPENDS = "zlib-native dbus-native"
+SECTION = "libs"
+HOMEPAGE = "http://www.trolltech.com"
+PRIORITY = "optional"
+LICENSE = "GPL"
+PROVIDES = "qt4-tools-native"
+
+INC_PR = "r0"
+
+inherit native
+
+SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-everywhere-opensource-src-${PV}.tar.gz \
+           file://qt-config.patch \
+           file://g++.conf \
+           file://linux.conf"
+S = "${WORKDIR}/qt-everywhere-opensource-src-${PV}"
+
+EXTRA_OECONF = "-prefix ${prefix} \
+                -L ${STAGING_LIBDIR_NATIVE} \
+                -I ${STAGING_INCDIR_NATIVE} \
+                -qt-libjpeg -qt-gif -system-zlib \
+                -no-libjpeg -no-libpng -no-libmng -no-libtiff \
+                -no-accessibility \
+                -no-cups \
+                -no-nas-sound \
+                -no-nis -no-openssl \
+                -verbose -release \
+                -embedded -no-freetype -no-glib -no-iconv \
+                -exceptions -xmlpatterns \
+                -qt3support"
+
+# yank default -e, otherwise we get the following error:
+# moc_qbuffer.cpp: No such file or directory
+EXTRA_OEMAKE = " "
+
+do_configure() {
+   (echo o; echo yes) | ./configure ${EXTRA_OECONF} || die "Configuring qt failed. EXTRA_OECONF was ${EXTRA_OECONF}"
+}
+
+TOBUILD = "\
+  src/tools/moc \
+  src/corelib \
+  src/sql \
+  src/xml \
+  src/network \
+  src/tools/uic \
+  src/tools/rcc \
+  src/xmlpatterns \
+  src/dbus \
+  src/gui \
+  src/testlib \
+  src/qt3support \
+"
+
+do_compile() {
+    for i in ${TOBUILD}; do
+        cd ${S}/$i && oe_runmake CC="${CC}" CXX="${CXX}"
+    done
+}
+
+NATIVE_INSTALL_WORKS = "1"
+
+do_install() {
+    for i in ${TOBUILD}; do
+        cd ${S}/$i && oe_runmake install INSTALL_ROOT=${D}
+    done
+}
recipes/qt4/qt4-native_4.7.2.bb new file +19 -0
new file mode 100644
index 0000000..7e98035
@@ -0,0 +1,19 @@
+require qt4-native.inc
+LICENSE = "LGPLv2.1 GPLv3"
+
+PR = "${INC_PR}.0"
+
+# Find the g++.conf/linux.conf in the right directory.
+FILESPATHPKG =. "qt-${PV}:"
+SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-everywhere-opensource-src-${PV}.tar.gz \
+           file://qt-config.patch \
+           file://g++.conf \
+           file://linux.conf"
+S = "${WORKDIR}/qt-everywhere-opensource-src-${PV}"
+
+EXTRA_OECONF += " -no-fast -silent -no-rpath"
+
+TOBUILD := "src/tools/bootstrap ${TOBUILD}"
+
+SRC_URI[md5sum] = "66b992f5c21145df08c99d21847f4fdb"
+SRC_URI[sha256sum] = "d4783b524b90bcd270ccf6e7a30d5fb51696c47eb5de49ebc2d553cd3eb49336"
Signature · 1 line
1.7.4.1
#6 lore raw

Re: [PATCH] qt4-native: introduce the native version of qt4

Quoted 3 lines · Simon Busch

The new recipe is based on the qt4-tool-native one but it even installs the libraries of qt4 and not only the tools like moc/rcc. It will not increase the build time as most libraries are already build for the qt4-tool-native but not staged.

Please remove the tools recipe too.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#7 lore raw

Re: [PATCH] qt4-native: introduce the native version of qt4

Quoted 1 line · Otavio Salvador

Please remove the tools recipe too.

Yes, I will provide a patch for this too. But first I want to know if you are fine with this patch?

#8 lore raw

Re: [PATCH] qt4-native: introduce the native version of qt4

Quoted 5 lines · Simon Busch
Quoted 1 line · Otavio Salvador

Please remove the tools recipe too.

Yes, I will provide a patch for this too. But first I want to know if you are fine with this patch?

For me it seems fine however I'd prefer if you drop the tools one at same commit so it is easier to revert if required.

BTW, it would be nice if you could do the same for oe-core :-)

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#9 lore raw

Re: [PATCH] qt4-native: introduce the native version of qt4

Quoted 9 lines · Otavio Salvador
Quoted 5 lines · Simon Busch
Quoted 1 line · Otavio Salvador

Please remove the tools recipe too.

Yes, I will provide a patch for this too. But first I want to know if you are fine with this patch?

For me it seems fine however I'd prefer if you drop the tools one at same commit so it is easier to revert if required.

Ok, I will send a patch which does both, adding the new and removing the old recipe. I will even provided all versions of qt4 supported by qt4-tools-native.

Quoted 1 line

BTW, it would be nice if you could do the same for oe-core :-)

I can but I have to setup the environment first to test everything. So this will need some time.

regards,
Simon

#10 lore raw

Re: [PATCH] qt4-native: introduce the native version of qt4

On Sun, May 8, 2011 at 15:01, Simon Busch <[email protected]> wrote:
...

Quoted 4 lines
Quoted 1 line

BTW, it would be nice if you could do the same for oe-core :-)

I can but I have to setup the environment first to test everything. So this will need some time.

That would be nice to avoid more missing stuff between both.

I am just porting your rpath and my qt fixes for cmake and avoiding divertion when possible seems the better.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#11 lore raw

PATCH 1/1 qt4-native: introduce the native version of qt4 and remove old qt4-tools-native

In reply to Simon Busch

The new recipe is based on the qt4-tool-native one but it even installs the libraries of qt4 and not only the tools like moc/rcc. It will not increase the build time as most libraries are already build for the qt4-tool-native but not staged.

This commit removes the old qt4-tools-native too. All versions provided by qt4-tools-native are even supported by qt4-native so it is a drop-in replacement.

---
 recipes/qt4/qt4-native.inc            |   65 +++++++++++++++++++++++++++
 recipes/qt4/qt4-native_4.5.2.bb       |   24 ++++++++++
 recipes/qt4/qt4-native_4.6.3.bb       |   13 +++++
 recipes/qt4/qt4-native_4.7.2.bb       |   19 ++++++++
 recipes/qt4/qt4-tools-native.inc      |   78 ---------------------------------
 recipes/qt4/qt4-tools-native_4.5.2.bb |   24 ----------
 recipes/qt4/qt4-tools-native_4.6.3.bb |   13 -----
 recipes/qt4/qt4-tools-native_4.7.2.bb |   21 ---------
 8 files changed, 121 insertions(+), 136 deletions(-)
 create mode 100644 recipes/qt4/qt4-native.inc
 create mode 100644 recipes/qt4/qt4-native_4.5.2.bb
 create mode 100644 recipes/qt4/qt4-native_4.6.3.bb
 create mode 100644 recipes/qt4/qt4-native_4.7.2.bb
 delete mode 100644 recipes/qt4/qt4-tools-native.inc
 delete mode 100644 recipes/qt4/qt4-tools-native_4.5.2.bb
 delete mode 100644 recipes/qt4/qt4-tools-native_4.6.3.bb
 delete mode 100644 recipes/qt4/qt4-tools-native_4.7.2.bb
recipes/qt4/qt4-native.inc new file +65 -0
new file mode 100644
index 0000000..8039ff1
@@ -0,0 +1,65 @@
+DESCRIPTION = "Native version Qt/[X11|Mac|Embedded]"
+DEPENDS = "zlib-native dbus-native"
+SECTION = "libs"
+HOMEPAGE = "http://www.trolltech.com"
+PRIORITY = "optional"
+LICENSE = "GPL"
+PROVIDES = "qt4-tools-native"
+
+INC_PR = "r0"
+
+inherit native
+
+SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-everywhere-opensource-src-${PV}.tar.gz \
+           file://qt-config.patch \
+           file://g++.conf \
+           file://linux.conf"
+S = "${WORKDIR}/qt-everywhere-opensource-src-${PV}"
+
+EXTRA_OECONF = "-prefix ${prefix} \
+                -L ${STAGING_LIBDIR_NATIVE} \
+                -I ${STAGING_INCDIR_NATIVE} \
+                -qt-libjpeg -qt-gif -system-zlib \
+                -no-libjpeg -no-libpng -no-libmng -no-libtiff \
+                -no-accessibility \
+                -no-cups \
+                -no-nas-sound \
+                -no-nis -no-openssl \
+                -verbose -release \
+                -embedded -no-freetype -no-glib -no-iconv \
+                -exceptions -xmlpatterns \
+                -qt3support"
+
+# yank default -e, otherwise we get the following error:
+# moc_qbuffer.cpp: No such file or directory
+EXTRA_OEMAKE = " "
+
+do_configure() {
+   (echo o; echo yes) | ./configure ${EXTRA_OECONF} || die "Configuring qt failed. EXTRA_OECONF was ${EXTRA_OECONF}"
+}
+
+TOBUILD = "\
+  src/tools/moc \
+  src/corelib \
+  src/xml \
+  src/network \
+  src/tools/uic \
+  src/tools/rcc \
+  src/xmlpatterns \
+  src/testlib \
+  src/qt3support \
+"
+
+do_compile() {
+    for i in ${TOBUILD}; do
+        cd ${S}/$i && oe_runmake CC="${CC}" CXX="${CXX}"
+    done
+}
+
+NATIVE_INSTALL_WORKS = "1"
+
+do_install() {
+    for i in ${TOBUILD}; do
+        cd ${S}/$i && oe_runmake install INSTALL_ROOT=${D}
+    done
+}
recipes/qt4/qt4-native_4.5.2.bb new file +24 -0
new file mode 100644
index 0000000..8a94694
@@ -0,0 +1,24 @@
+require qt4-native.inc
+
+# Older releases have different source archive name, than .inc
+SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-embedded-linux-opensource-src-${PV}.tar.bz2 \
+           file://configure-lflags.patch \
+           file://qt-config.patch \
+           file://g++.conf \
+           file://linux.conf"
+
+S = "${WORKDIR}/qt-embedded-linux-opensource-src-${PV}"
+
+EXTRA_OECONF += " -fast -qt-freetype"
+
+do_configure() {
+   (echo o; echo yes) | LFLAGS="-L${STAGING_LIBDIR_NATIVE}" ./configure ${EXTRA_OECONF} || die "Configuring qt failed. EXTRA_OECONF was ${EXTRA_OECONF}"
+}
+
+LICENSE = "LGPLv2.1 GPLv3"
+PR = "${INC_PR}.2"
+
+TOBUILD := "src/tools/bootstrap ${TOBUILD}"
+
+SRC_URI[md5sum] = "62186345c609a72b89f16d83bc7a130f"
+SRC_URI[sha256sum] = "272301a27e2f7bcd44c8d09f496e1c749c80b86d9489ea9c30bb265bf2dd02fc"
recipes/qt4/qt4-native_4.6.3.bb new file +13 -0
new file mode 100644
index 0000000..b0c9bcb
@@ -0,0 +1,13 @@
+DEFAULT_PREFERENCE = "-1"
+
+require qt4-native.inc
+LICENSE = "LGPLv2.1 GPLv3"
+PR = "${INC_PR}.0"
+
+EXTRA_OECONF += " -no-fast -silent -no-rpath"
+
+TOBUILD := "src/tools/bootstrap ${TOBUILD}"
+
+SRC_URI[md5sum] = "5c69f16d452b0bb3d44bc3c10556c072"
+SRC_URI[sha256sum] = "f4e0ada8d4d516bbb8600a3ee7d9046c9c79e38cd781df9ffc46d8f16acd1768"
+
recipes/qt4/qt4-native_4.7.2.bb new file +19 -0
new file mode 100644
index 0000000..7e98035
@@ -0,0 +1,19 @@
+require qt4-native.inc
+LICENSE = "LGPLv2.1 GPLv3"
+
+PR = "${INC_PR}.0"
+
+# Find the g++.conf/linux.conf in the right directory.
+FILESPATHPKG =. "qt-${PV}:"
+SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-everywhere-opensource-src-${PV}.tar.gz \
+           file://qt-config.patch \
+           file://g++.conf \
+           file://linux.conf"
+S = "${WORKDIR}/qt-everywhere-opensource-src-${PV}"
+
+EXTRA_OECONF += " -no-fast -silent -no-rpath"
+
+TOBUILD := "src/tools/bootstrap ${TOBUILD}"
+
+SRC_URI[md5sum] = "66b992f5c21145df08c99d21847f4fdb"
+SRC_URI[sha256sum] = "d4783b524b90bcd270ccf6e7a30d5fb51696c47eb5de49ebc2d553cd3eb49336"
recipes/qt4/qt4-tools-native.inc deleted +0 -78

78 lines not on this page · raw message

recipes/qt4/qt4-tools-native_4.5.2.bb deleted +0 -24
deleted file mode 100644
index 206e486..0000000
@@ -1,24 +0,0 @@
-require qt4-tools-native.inc
-
-# Older releases have different source archive name, than .inc
-SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-embedded-linux-opensource-src-${PV}.tar.bz2 \
-           file://configure-lflags.patch \
-           file://qt-config.patch \
-           file://g++.conf \
-           file://linux.conf"
-
-S = "${WORKDIR}/qt-embedded-linux-opensource-src-${PV}"
-
-EXTRA_OECONF += " -fast -qt-freetype"
-
-do_configure() {
-   (echo o; echo yes) | LFLAGS="-L${STAGING_LIBDIR_NATIVE}" ./configure ${EXTRA_OECONF} || die "Configuring qt failed. EXTRA_OECONF was ${EXTRA_OECONF}"
-}
-
-LICENSE = "LGPLv2.1 GPLv3"
-PR = "${INC_PR}.2"
-
-TOBUILD := "src/tools/bootstrap ${TOBUILD}"
-
-SRC_URI[md5sum] = "62186345c609a72b89f16d83bc7a130f"
-SRC_URI[sha256sum] = "272301a27e2f7bcd44c8d09f496e1c749c80b86d9489ea9c30bb265bf2dd02fc"
recipes/qt4/qt4-tools-native_4.6.3.bb deleted +0 -13
deleted file mode 100644
index a188157..0000000
@@ -1,13 +0,0 @@
-DEFAULT_PREFERENCE = "-1"
-
-require qt4-tools-native.inc
-LICENSE = "LGPLv2.1 GPLv3"
-PR = "${INC_PR}.0"
-
-EXTRA_OECONF += " -no-fast -silent -no-rpath"
-
-TOBUILD := "src/tools/bootstrap ${TOBUILD}"
-
-SRC_URI[md5sum] = "5c69f16d452b0bb3d44bc3c10556c072"
-SRC_URI[sha256sum] = "f4e0ada8d4d516bbb8600a3ee7d9046c9c79e38cd781df9ffc46d8f16acd1768"
-
recipes/qt4/qt4-tools-native_4.7.2.bb deleted +0 -21
deleted file mode 100644
index 7dbb569..0000000
@@ -1,21 +0,0 @@
-DEFAULT_PREFERENCE = "-1"
-
-require qt4-tools-native.inc
-LICENSE = "LGPLv2.1 GPLv3"
-
-PR = "${INC_PR}.0"
-
-# Find the g++.conf/linux.conf in the right directory.
-FILESPATHPKG =. "qt-${PV}:"
-SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-everywhere-opensource-src-${PV}.tar.gz \
-           file://qt-config.patch \
-           file://g++.conf \
-           file://linux.conf"
-S = "${WORKDIR}/qt-everywhere-opensource-src-${PV}"
-
-EXTRA_OECONF += " -no-fast -silent -no-rpath"
-
-TOBUILD := "src/tools/bootstrap ${TOBUILD}"
-
-SRC_URI[md5sum] = "66b992f5c21145df08c99d21847f4fdb"
-SRC_URI[sha256sum] = "d4783b524b90bcd270ccf6e7a30d5fb51696c47eb5de49ebc2d553cd3eb49336"
Signature · 1 line
1.7.4.1
Acked-by on v1 1/1
#12 lore raw

Re: [PATCH] qt4-native: introduce the native version of qt4 and remove old qt4-tools-native

Quoted 1 line · Simon Busch
Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#13 lore raw
In reply to Simon Busch

On Sun, May 8, 2011 at 13:51, Simon Busch <[email protected]> wrote:
...

Quoted 6 lines

Hm, I need it for the embedded variant of qt4 so we should add it to qt4.inc which is already quite complex and very target specific. I think the best option is to create a qt4-native recipe which provides both qt4-tools-native and qt4-libs-native. This would even be the best option to be backward compatible (some stuff in OE is depending on qt4-native-tools in different versions).

The native variant does need to be the embedded one for you? I think you just needed it to run something that uses QtCore or something similar during the build process (my case) and then build it for the target.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#14 lore raw
Quoted 9 lines · Otavio Salvador

On Sun, May 8, 2011 at 13:51, Simon Busch <[email protected]> wrote:
...

Quoted 6 lines

Hm, I need it for the embedded variant of qt4 so we should add it to qt4.inc which is already quite complex and very target specific. I think the best option is to create a qt4-native recipe which provides both qt4-tools-native and qt4-libs-native. This would even be the best option to be backward compatible (some stuff in OE is depending on qt4-native-tools in different versions).

Quoted 4 lines

The native variant does need to be the embedded one for you? I think you just needed it to run something that uses QtCore or something similar during the build process (my case) and then build it for the target.

No, the native variant should be build from the qt4 anywhere package as it's already the case for the qt4-tools-native. My qt4-native recipe does this too. It builds only the needed tools and libraries and installs them to the sysroot. Currently it builds:

- src/tools/moc
- src/corelib
- src/xml
- src/network
- src/tools/uic
- src/tools/rcc
- src/xmlpatterns
- src/testlib
- src/qt3support

If some other libs/tools are needed for any other native tool we should add it to the list above.

And yes, you are right my recipes which need the qt4-native one only needs the Qt4 core libs (as it should be the case for most native stuff which uses qt4).

regards,
Simon