ti-wifi-utils: install calibrator ini files to rootfs
PATCH 1/1 ti-wifi-utils: install calibrator ini files to rootfs
In order to perform wifi calibration the calibrator needs to be provided as input with a reference NVS file that matches the wifi chip and the radio mudule that is being used.
This patch install these ini files to the root file system so they can be used when performing the calibration.
--- recipes/ti/ti-wifi-utils_git.bb | 13 ++++++++++++- 1 files changed, 12 insertions(+), 1 deletions(-)
recipes/ti/ti-wifi-utils_git.bb +12 -1
@@ -3,7 +3,7 @@ LICENSE = "TI-BSD" DEPENDS = "libnl" -PR ="r2" +PR ="r3" PV ="0.0" PR_append = "+gitr${SRCPV}"
@@ -17,5 +17,16 @@ CFLAGS += " -DCONFIG_LIBNL20" do_install() { install -d ${D}${bindir} + install -d ${D}${bindir}/ti-wifi-utils/ini_files/127x + install -d ${D}${bindir}/ti-wifi-utils/ini_files/128x + install -m 0755 calibrator ${D}${bindir}/ + install -m 0755 ${S}/ini_files/127x/* ${D}${bindir}/ti-wifi-utils/ini_files/127x + install -m 0755 ${S}/ini_files/128x/* ${D}${bindir}/ti-wifi-utils/ini_files/128x } + +FILES_${PN} +=" \ + ${bindir}/ti-wifi-utils/ini_files/127x \ + ${bindir}/ti-wifi-utils/ini_files/128x \ + " +
Signature · 1 line
1.7.0.4
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 26 lines · Eyal Reizer
In order to perform wifi calibration the calibrator needs to be provided as input with a reference NVS file that matches the wifi chip and the radio mudule that is being used.
This patch install these ini files to the root file system so they can be used when performing the calibration.
Signed-off-by Eyal Reizer <[email protected]>--- recipes/ti/ti-wifi-utils_git.bb | 13 ++++++++++++- 1 files changed, 12 insertions(+), 1 deletions(-)recipes/ti/ti-wifi-utils_git.bb +1
-1@@ -3,7 +3,7 @@ LICENSE = "TI-BSD" DEPENDS = "libnl" -PR ="r2" +PR ="r3" PV ="0.0" PR_append = "+gitr${SRCPV}"
recipes/ti/ti-wifi-utils_git.bb CFLAGS += " -DCONFIG_LIBNL20" · line 21
Quoted 5 lines
recipes/ti/ti-wifi-utils_git.bb +2
-0@@ -17,5 +17,16 @@ CFLAGS += " -DCONFIG_LIBNL20" do_install() { install -d ${D}${bindir} + install -d ${D}${bindir}/ti-wifi-utils/ini_files/127x + install -d ${D}${bindir}/ti-wifi-utils/ini_files/128x
Ini files belong somewhere in /usr/share or maybe /etc, but not in /usr/bin.
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFN68dlMkyGM64RGpERAlxuAJ9c1xagnhFBj1zwfDMKan1zsQcKPgCfTpeP eSyrjfcImfSInu3hdgkkoEk=
=n6ml
-----END PGP SIGNATURE-----