Skip to contentSkip to conversation

usb:dummy_hcd: Force FS device connection according to module parameter

PATCH Applied Tatyana Brokhman 3 participants 3 messages Jun 10, 2011

Subsystems (2)
USB Arm Qualcomm mailing list
lore
Share & tools
lore

Tatyana Brokhman

author
#0 lore raw

PATCH v3 1/1 usb:dummy_hcd: Force FS device connection according to module parameter

This patch adds a new module parameter to dummy_hcd: is_high_speed When set to false the connected device will be forced to operate in FS mode. The default of this parameter is true.

Signed-off-by Tatyana Brokhman <[email protected]>
---
 drivers/usb/gadget/dummy_hcd.c |   20 +++++++++++++++-----
 1 files changed, 15 insertions(+), 5 deletions(-)
drivers/usb/gadget/dummy_hcd.c +15 -5
index f0cdd13..8077811 100644
@@ -72,13 +72,17 @@ MODULE_LICENSE ("GPL");
 
 struct dummy_hcd_module_parameters {
 	bool is_super_speed;
+	bool is_high_speed;
 };
 
 static struct dummy_hcd_module_parameters mod_data = {
-	.is_super_speed = false
+	.is_super_speed = false,
+	.is_high_speed = true,
 };
 module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
 MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
+module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
+MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
 /*-------------------------------------------------------------------------*/
 
 /* gadget side driver data structres */

@@ -904,12 +908,15 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	dum->gadget.ep0 = &dum->ep [0].ep;
 	if (mod_data.is_super_speed)
 		dum->gadget.speed = driver->speed;
+	else if (mod_data.is_high_speed)
+		dum->gadget.speed = min_t(u8, USB_SPEED_HIGH, driver->speed);
 	else
-		dum->gadget.speed = min((u8)USB_SPEED_HIGH, (u8)driver->speed);
+		dum->gadget.speed = USB_SPEED_FULL;
 	if (dum->gadget.speed < driver->speed)
-		dev_dbg(udc_dev(dum), "This device can perform faster if"
-				      " you connect it to a "
-				      "SupeSpeed port...\n");
+		dev_dbg(udc_dev(dum), "This device can perform faster"
+				" if you connect it to a %s port...\n",
+			(driver->speed == USB_SPEED_SUPER ?
+			 "SuperSpeed" : "HighSpeed"));
 
 	if (dum->gadget.speed == USB_SPEED_SUPER) {
 		for (i = 0; i < DUMMY_ENDPOINTS; i++)

@@ -2417,6 +2424,9 @@ static int __init init (void)
 	if (usb_disabled ())
 		return -ENODEV;
 
+	if (!mod_data.is_high_speed && mod_data.is_super_speed)
+		return -EINVAL;
+
 	the_hcd_pdev = platform_device_alloc(driver_name, -1);
 	if (!the_hcd_pdev)
 		return retval;
Signature · 5 lines
1.7.3.3

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.