beagleboard-test-scripts: Add a script flash-fs.sh for flashing NAND
PATCH v4 1/1 beagleboard-test-scripts: Add a script flash-fs.sh for flashing NAND
This script flashes the NAND of a BeagleBoard if:
* There is a valid image on the SD Card to flash
* The board has NAND
Signed-off-by Joel A Fernandes <[email protected]>
---
Changes since v3:
* User button changes for flashing have been removed as it seemed unstable and we would like to have a revision which we're using for the BeagleBoard image that's being shipped with a BeagleBoard C5 board.
We're calling this version of the build "Alpha", the "Beta" will have the flash-with-userbutton feature
* flash-fs.sh renamed to to flash-nand-fs.sh after suggestion from Khem
.../beagleboard/beagleboard-test-scripts_git.bb | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-)
recipes/beagleboard/beagleboard-test-scripts_git.bb +11 -3
@@ -1,14 +1,18 @@ ## Reminder: The correct spacing for a variable is FOO = "BAR" in : PR="r1" DESCRIPTION = "BeagleBoard test scripts" HOMEPAGE = "http://beagleboad.org/support" -PR = "r2" +PR = "r3" -SRC_URI = "git://gitorious.org/beagleboard-validation/scripts.git;protocol=git \ +SRC_URI = "git://gitorious.org/~joelf/beagleboard-validation/validation-scripts.git;protocol=git \ " -SRCREV = "473dd2ab20d866be6168c9f992c2c9e74e485c9d" +SRCREV = "2df76857155fbd462527c2b00ee83214483f0594" S = "${WORKDIR}/git" +inherit update-rc.d +INITSCRIPT_NAME = "flash-nand-fs.sh" +INITSCRIPT_PARAMS = "start 99 2 3 4 5 ." + do_install() { TEST_FILES=" \ testaudio \
@@ -28,4 +32,8 @@ do_install() { for i in ${TEST_FILES}; do install -m 0755 ${S}/${i} ${D}/${bindir} done + # A script to flash NAND if the board has it, and if there is valid image to flash on the SD Card. + # We also register it as an init script so that the SD Card auto-flashes to NAND during boot. + install -d ${D}/${sysconfdir}/init.d/ + install -m 0755 ${S}/flashing/flash-nand-fs.sh ${D}/${sysconfdir}/init.d/flash-nand-fs.sh }
Signature · 1 line
1.7.0.4