Nand Erase/Write Fails with mtd error -5

U-Boot mks 2 participants 2 messages Jan 23, 2014 – Jan 24, 2014

lore

Share & tools

lore

mks

author

2014-01-23 20:30 UTC #0 lore raw

Hello,

Im getting a trouble with mtd on my imx27 27 board, I can't write or erase it on U-Boot-1.3.4, here is the log :

U-Boot> run
update_all
FEC ETHERNET: Autonegotiation
timeout
FEC ETHERNET: Link is down -
10/Half
TFTP from server 192.168.0.2; our IP address is
192.168.0.10
Filename
'apf27-linux.bin'.
Load address:
0xa0000000
Loading: T T T T T T T T T
T
Retry count exceeded; starting
again
TFTP from server 192.168.0.2; our IP address is
192.168.0.10
Filename
'apf27-linux.bin'.
Load address:
0xa0000000
Loading:
#################################################################

#################################################################

############################################################
done
Bytes transferred = 2635464 (2836c8
hex)

NAND erase: device 0 offset 0x100000, size
0x500000

NAND 512MiB 1,8V 8-bit: MTD Erase failure:
-5

NAND 512MiB 1,8V 8-bit: MTD Erase failure:
-5
OK

NAND write: device 0 offset 0x100000, size
0x2836c8
nand_write_ecc: Device is write
protected
writing NAND page at offset 0x100000
failed
Data did not fit into device, due to bad
blocks
2635464 bytes written: ERROR

Anyone have an idea of the problem here?
Thanks for you help.

Signature · 1 line

<[email protected]>

Wolfgang Denk

2014-01-24 14:02 UTC #1 lore raw

Dear mks,

it would be nice if you could use a real name here...

Quoted 3 lines · In message <1310410193.3166.2.camel@debian> you wrote:

Im getting a trouble with mtd on my imx27 27 board, I can't write or erase it on U-Boot-1.3.4, here is the log :

I'm sorry, but v1.3.4 is more than 5 years old - this is hopelessly obsolete. Please do yourself (and us) a favour and upgrade to a recent version (say, v2014.01) an try again. It is pretty much likely that your error has long been fixed sice.

Best regards,

Wolfgang Denk

Signature · 5 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I can type faster than I can move a  mouse,  so  I  find  menu-driven
drawing packages time consuming and frustrating.      - W. R. Stevens