beagleboard-test-scripts: BeagleBoard userbutton detection for flashing
PATCH 1/1 beagleboard-test-scripts: BeagleBoard userbutton detection for flashing
* Build and install a userbutton tool to detect state of the user button on a BeagleBoard from /dev/input/event0
* Install a user.txt and uEnv.txt to /boot, Narcissus will copy from here to the FAT partition of an SD Card
---
This is an effort to be able to build an SD Card image for the BeagleBoard that can be used optionally for flashing an image to NAND if the user button is pressed. This patch makes sure that the root filesystem is ready with the scripts and programs required for Narcissus to build such an image.
This patch can be safely merged in even if the Narcissus hasn't yet been (as it was just submitted)
The related Narcissus patch is here:
http://groups.google.com/group/beagleboard/browse_thread/thread/c0dd79f8e5fb26ae
.../beagleboard/beagleboard-test-scripts_git.bb | 12 ++++++++++-- 1 files changed, 10 insertions(+), 2 deletions(-)
recipes/beagleboard/beagleboard-test-scripts_git.bb +10 -2
@@ -1,18 +1,22 @@ ## Reminder: The correct spacing for a variable is FOO = "BAR" in : PR="r1" DESCRIPTION = "BeagleBoard test scripts" HOMEPAGE = "http://beagleboad.org/support" -PR = "r3" +PR = "r4" SRC_URI = "git://gitorious.org/~joelf/beagleboard-validation/validation-scripts.git;protocol=git \ " -SRCREV = "2df76857155fbd462527c2b00ee83214483f0594" +SRCREV = "f7ba1b49190003af524f1a768ec887955a9994a0" S = "${WORKDIR}/git" inherit update-rc.d INITSCRIPT_NAME = "flash-nand-fs.sh" INITSCRIPT_PARAMS = "start 99 2 3 4 5 ." +do_compile() { + ${CC} -o userbutton-pressed ${CFLAGS} ${LDFLAGS} flashing/userbutton-pressed.c +} + do_install() { TEST_FILES=" \ testaudio \
@@ -36,4 +40,8 @@ do_install() { # We also register it as an init script so that the SD Card auto-flashes to NAND during boot. install -d ${D}/${sysconfdir}/init.d/ install -m 0755 ${S}/flashing/flash-nand-fs.sh ${D}/${sysconfdir}/init.d/flash-nand-fs.sh + install -m 0755 userbutton-pressed ${D}/${bindir}/userbutton-pressed + install -d ${D}/boot/ + install -m 0755 ${S}/flashing/user.txt ${D}/boot/user.txt + install -m 0755 ${S}/flashing/uEnv.txt ${D}/boot/uEnv.txt }
Signature · 1 line
1.7.0.4
Quoted 9 lines · Joel A Fernandes
* Build and install a userbutton tool to detect state of the user button on a BeagleBoard from
/dev/input/event0
* Install a user.txt and uEnv.txt to /boot, Narcissus will copy from here to the FAT partition of an SD CardSigned-off-by Joel A Fernandes <[email protected]>---
This is an effort to be able to build an SD Card image for the BeagleBoard that can be used optionally for flashing an image to NAND if the user button is pressed. This patch makes sure that the root filesystem is ready with the scripts and programs required for Narcissus to build such an image.
Quoted 8 lines
This patch can be safely merged in even if the Narcissus hasn't yet been (as it was just submitted)
The related Narcissus patch is here:
http://groups.google.com/group/beagleboard/browse_thread/thread/c0dd79f8e5fb26ae.../beagleboard/beagleboard-test-scripts_git.bb | 12 ++++++++++--
1 files changed, 10 insertions(+), 2 deletions(-)
Would it be possible for amyone to pull this patch into the OE maintenance/dev trees?
Thanks,
Regards,
Joel