Skip to contentSkip to conversation

libiconv: Delete recipes

PATCH New Khem Raj 1 participant 1 message Jul 26, 2011

lore
Share & tools
lore

Khem Raj

author
#0 lore raw

PATCH 1/1 libiconv: Delete recipes

libiconv 1.13.1 is now merged into oe-core

---
 .../libiconv/libiconv-1.13.1/autoconf.patch        |16018 --------------------
 meta-oe/recipes-support/libiconv/libiconv.inc      |   14 -
 .../recipes-support/libiconv/libiconv_1.13.1.bb    |   25 -
 3 files changed, 0 insertions(+), 16057 deletions(-)
 delete mode 100644 meta-oe/recipes-support/libiconv/libiconv-1.13.1/autoconf.patch
 delete mode 100644 meta-oe/recipes-support/libiconv/libiconv.inc
 delete mode 100644 meta-oe/recipes-support/libiconv/libiconv_1.13.1.bb
meta-oe/recipes-support/libiconv/libiconv-1.13.1/autoconf.patch deleted +0 -16018
deleted file mode 100644
index 435e528..0000000
@@ -1,16018 +0,0 @@
-Index: libiconv-1.13.1/configure.ac
-===================================================================
---- libiconv-1.13.1.orig/configure.ac
-+++ libiconv-1.13.1/configure.ac
-@@ -23,7 +23,7 @@ AC_CONFIG_AUX_DIR([build-aux])
- AM_INIT_AUTOMAKE([libiconv], [1.13.1])
- AC_CONFIG_HEADERS([config.h lib/config.h])
- AC_PROG_MAKE_SET
--
-+AC_CONFIG_MACRO_DIR([m4])
- dnl           checks for basic programs
- 
- AC_PROG_CC
-Index: libiconv-1.13.1/libcharset/configure.ac
-===================================================================
---- libiconv-1.13.1.orig/libcharset/configure.ac
-+++ libiconv-1.13.1/libcharset/configure.ac
-@@ -16,17 +16,17 @@ dnl along with the GNU CHARSET Library;
- dnl write to the Free Software Foundation, Inc., 51 Franklin Street,
- dnl Fifth Floor, Boston, MA 02110-1301, USA.
- 
--AC_PREREQ([2.13])
-+AC_PREREQ(2.61)
-+AC_INIT([libcharset],[1.4] )
-+AC_CONFIG_SRCDIR([lib/localcharset.c])
- 
--PACKAGE=libcharset
--VERSION=1.4
--
--AC_INIT([lib/localcharset.c])
- AC_CONFIG_AUX_DIR([build-aux])
- AC_CONFIG_HEADER([config.h])
- AC_PROG_MAKE_SET
--AC_SUBST([PACKAGE])
--AC_SUBST([VERSION])
-+dnl AC_SUBST(PACKAGE)
-+dnl AC_SUBST(VERSION)
-+
-+AC_CONFIG_MACRO_DIR([m4])
- 
- dnl           checks for basic programs
- 
-Index: libiconv-1.13.1/libcharset/m4/libtool.m4
-===================================================================
---- libiconv-1.13.1.orig/libcharset/m4/libtool.m4
-+++ /dev/null
-@@ -1,7357 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--#
--#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--#                 2006, 2007, 2008 Free Software Foundation, Inc.
--#   Written by Gordon Matzigkeit, 1996
--#
--# This file is free software; the Free Software Foundation gives
--# unlimited permission to copy and/or distribute it, with or without
--# modifications, as long as this notice is preserved.
--
--m4_define([_LT_COPYING], [dnl
--#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--#                 2006, 2007, 2008 Free Software Foundation, Inc.
--#   Written by Gordon Matzigkeit, 1996
--#
--#   This file is part of GNU Libtool.
--#
--# GNU Libtool is free software; you can redistribute it and/or
--# modify it under the terms of the GNU General Public License as
--# published by the Free Software Foundation; either version 2 of
--# the License, or (at your option) any later version.
--#
--# As a special exception to the GNU General Public License,
--# if you distribute this file as part of a program or library that
--# is built using GNU Libtool, you may include this file under the
--# same distribution terms that you use for the rest of that program.
--#
--# GNU Libtool is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with GNU Libtool; see the file COPYING.  If not, a copy
--# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
--# obtained by writing to the Free Software Foundation, Inc.,
--# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
--])
--
--# serial 56 LT_INIT
--
--
--# LT_PREREQ(VERSION)
--# ------------------
--# Complain and exit if this libtool version is less that VERSION.
--m4_defun([LT_PREREQ],
--[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
--       [m4_default([$3],
--		   [m4_fatal([Libtool version $1 or higher is required],
--		             63)])],
--       [$2])])
--
--
--# _LT_CHECK_BUILDDIR
--# ------------------
--# Complain if the absolute build directory name contains unusual characters
--m4_defun([_LT_CHECK_BUILDDIR],
--[case `pwd` in
--  *\ * | *\	*)
--    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
--esac
--])
--
--
--# LT_INIT([OPTIONS])
--# ------------------
--AC_DEFUN([LT_INIT],
--[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
--AC_BEFORE([$0], [LT_LANG])dnl
--AC_BEFORE([$0], [LT_OUTPUT])dnl
--AC_BEFORE([$0], [LTDL_INIT])dnl
--m4_require([_LT_CHECK_BUILDDIR])dnl
--
--dnl Autoconf doesn't catch unexpanded LT_ macros by default:
--m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
--m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
--dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
--dnl unless we require an AC_DEFUNed macro:
--AC_REQUIRE([LTOPTIONS_VERSION])dnl
--AC_REQUIRE([LTSUGAR_VERSION])dnl
--AC_REQUIRE([LTVERSION_VERSION])dnl
--AC_REQUIRE([LTOBSOLETE_VERSION])dnl
--m4_require([_LT_PROG_LTMAIN])dnl
--
--dnl Parse OPTIONS
--_LT_SET_OPTIONS([$0], [$1])
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ltmain"
--
--# Always use our own libtool.
--LIBTOOL="${CONFIG_SHELL-$SHELL} "'$(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--_LT_SETUP
--
--# Only expand once:
--m4_define([LT_INIT])
--])# LT_INIT
--
--# Old names:
--AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
--AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
--dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
--
--
--# _LT_CC_BASENAME(CC)
--# -------------------
--# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
--m4_defun([_LT_CC_BASENAME],
--[for cc_temp in $1""; do
--  case $cc_temp in
--    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
--    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
--    \-*) ;;
--    *) break;;
--  esac
--done
--cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
--])
--
--
--# _LT_FILEUTILS_DEFAULTS
--# ----------------------
--# It is okay to use these file commands and assume they have been set
--# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
--m4_defun([_LT_FILEUTILS_DEFAULTS],
--[: ${CP="cp -f"}
--: ${MV="mv -f"}
--: ${RM="rm -f"}
--])# _LT_FILEUTILS_DEFAULTS
--
--
--# _LT_SETUP
--# ---------
--m4_defun([_LT_SETUP],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--_LT_DECL([], [host_alias], [0], [The host system])dnl
--_LT_DECL([], [host], [0])dnl
--_LT_DECL([], [host_os], [0])dnl
--dnl
--_LT_DECL([], [build_alias], [0], [The build system])dnl
--_LT_DECL([], [build], [0])dnl
--_LT_DECL([], [build_os], [0])dnl
--dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([LT_PATH_LD])dnl
--AC_REQUIRE([LT_PATH_NM])dnl
--dnl
--AC_REQUIRE([AC_PROG_LN_S])dnl
--test -z "$LN_S" && LN_S="ln -s"
--_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
--dnl
--AC_REQUIRE([LT_CMD_MAX_LEN])dnl
--_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
--_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
--dnl
--m4_require([_LT_FILEUTILS_DEFAULTS])dnl
--m4_require([_LT_CHECK_SHELL_FEATURES])dnl
--m4_require([_LT_CMD_RELOAD])dnl
--m4_require([_LT_CHECK_MAGIC_METHOD])dnl
--m4_require([_LT_CMD_OLD_ARCHIVE])dnl
--m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
--
--_LT_CONFIG_LIBTOOL_INIT([
--# See if we are running on zsh, and set the options which allow our
--# commands through without removal of \ escapes INIT.
--if test -n "\${ZSH_VERSION+set}" ; then
--   setopt NO_GLOB_SUBST
--fi
--])
--if test -n "${ZSH_VERSION+set}" ; then
--   setopt NO_GLOB_SUBST
--fi
--
--_LT_CHECK_OBJDIR
--
--m4_require([_LT_TAG_COMPILER])dnl
--_LT_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
--  # AIX sometimes has problems with the GCC collect2 program.  For some
--  # reason, if we set the COLLECT_NAMES environment variable, the problems
--  # vanish in a puff of smoke.
--  if test "X${COLLECT_NAMES+set}" != Xset; then
--    COLLECT_NAMES=
--    export COLLECT_NAMES
--  fi
--  ;;
--esac
--
--# Sed substitution that helps us do robust quoting.  It backslashifies
--# metacharacters that are still active within double-quoted strings.
--sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
--
--# Same as above, but do not quote variable references.
--double_quote_subst='s/\([["`\\]]\)/\\\1/g'
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to delay expansion of an escaped single quote.
--delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Global variables:
--ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except MSVC,
--# which needs '.lib').
--libext=a
--
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
--test -z "$LD" && LD=ld
--test -z "$ac_objext" && ac_objext=o
--
--_LT_CC_BASENAME([$compiler])
--
--# Only perform the check for file, if the check method requires it
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--case $deplibs_check_method in
--file_magic*)
--  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
--    _LT_PATH_MAGIC
--  fi
--  ;;
--esac
--
--# Use C for the default configuration in the libtool script
--LT_SUPPORTED_TAG([CC])
--_LT_LANG_C_CONFIG
--_LT_LANG_DEFAULT_CONFIG
--_LT_CONFIG_COMMANDS
--])# _LT_SETUP
--
--
--# _LT_PROG_LTMAIN
--# ---------------
--# Note that this code is called both from `configure', and `config.status'
--# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
--# `config.status' has no value for ac_aux_dir unless we are using Automake,
--# so we pass a copy along to make sure it has a sensible value anyway.
--m4_defun([_LT_PROG_LTMAIN],
--[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
--_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
--ltmain="$ac_aux_dir/ltmain.sh"
--])# _LT_PROG_LTMAIN
--
--
--## ------------------------------------- ##
--## Accumulate code for creating libtool. ##
--## ------------------------------------- ##
--
--# So that we can recreate a full libtool script including additional
--# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
--# in macros and then make a single call at the end using the `libtool'
--# label.
--
--
--# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
--# ----------------------------------------
--# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
--m4_define([_LT_CONFIG_LIBTOOL_INIT],
--[m4_ifval([$1],
--          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
--                     [$1
--])])])
--
--# Initialize.
--m4_define([_LT_OUTPUT_LIBTOOL_INIT])
--
--
--# _LT_CONFIG_LIBTOOL([COMMANDS])
--# ------------------------------
--# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
--m4_define([_LT_CONFIG_LIBTOOL],
--[m4_ifval([$1],
--          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
--                     [$1
--])])])
--
--# Initialize.
--m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
--
--
--# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
--# -----------------------------------------------------
--m4_defun([_LT_CONFIG_SAVE_COMMANDS],
--[_LT_CONFIG_LIBTOOL([$1])
--_LT_CONFIG_LIBTOOL_INIT([$2])
--])
--
--
--# _LT_FORMAT_COMMENT([COMMENT])
--# -----------------------------
--# Add leading comment marks to the start of each line, and a trailing
--# full-stop to the whole comment if one is not present already.
--m4_define([_LT_FORMAT_COMMENT],
--[m4_ifval([$1], [
--m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
--              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
--)])
--
--
--
--## ------------------------ ##
--## FIXME: Eliminate VARNAME ##
--## ------------------------ ##
--
--
--# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
--# -------------------------------------------------------------------
--# CONFIGNAME is the name given to the value in the libtool script.
--# VARNAME is the (base) name used in the configure script.
--# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
--# VARNAME.  Any other value will be used directly.
--m4_define([_LT_DECL],
--[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
--    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
--	[m4_ifval([$1], [$1], [$2])])
--    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
--    m4_ifval([$4],
--	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
--    lt_dict_add_subkey([lt_decl_dict], [$2],
--	[tagged?], [m4_ifval([$5], [yes], [no])])])
--])
--
--
--# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
--# --------------------------------------------------------
--m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
--
--
--# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
--# ------------------------------------------------
--m4_define([lt_decl_tag_varnames],
--[_lt_decl_filter([tagged?], [yes], $@)])
--
--
--# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
--# ---------------------------------------------------------
--m4_define([_lt_decl_filter],
--[m4_case([$#],
--  [0], [m4_fatal([$0: too few arguments: $#])],
--  [1], [m4_fatal([$0: too few arguments: $#: $1])],
--  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
--  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
--  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
--])
--
--
--# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
--# --------------------------------------------------
--m4_define([lt_decl_quote_varnames],
--[_lt_decl_filter([value], [1], $@)])
--
--
--# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
--# ---------------------------------------------------
--m4_define([lt_decl_dquote_varnames],
--[_lt_decl_filter([value], [2], $@)])
--
--
--# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
--# ---------------------------------------------------
--m4_define([lt_decl_varnames_tagged],
--[m4_assert([$# <= 2])dnl
--_$0(m4_quote(m4_default([$1], [[, ]])),
--    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
--    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
--m4_define([_lt_decl_varnames_tagged],
--[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
--
--
--# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
--# ------------------------------------------------
--m4_define([lt_decl_all_varnames],
--[_$0(m4_quote(m4_default([$1], [[, ]])),
--     m4_if([$2], [],
--	   m4_quote(lt_decl_varnames),
--	m4_quote(m4_shift($@))))[]dnl
--])
--m4_define([_lt_decl_all_varnames],
--[lt_join($@, lt_decl_varnames_tagged([$1],
--			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
--])
--
--
--# _LT_CONFIG_STATUS_DECLARE([VARNAME])
--# ------------------------------------
--# Quote a variable value, and forward it to `config.status' so that its
--# declaration there will have the same value as in `configure'.  VARNAME
--# must have a single quote delimited value for this to work.
--m4_define([_LT_CONFIG_STATUS_DECLARE],
--[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
--
--
--# _LT_CONFIG_STATUS_DECLARATIONS
--# ------------------------------
--# We delimit libtool config variables with single quotes, so when
--# we write them to config.status, we have to be sure to quote all
--# embedded single quotes properly.  In configure, this macro expands
--# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
--#
--#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
--m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
--[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
--    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
--
--
--# _LT_LIBTOOL_TAGS
--# ----------------
--# Output comment and list of tags supported by the script
--m4_defun([_LT_LIBTOOL_TAGS],
--[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
--available_tags="_LT_TAGS"dnl
--])
--
--
--# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
--# -----------------------------------
--# Extract the dictionary values for VARNAME (optionally with TAG) and
--# expand to a commented shell variable setting:
--#
--#    # Some comment about what VAR is for.
--#    visible_name=$lt_internal_name
--m4_define([_LT_LIBTOOL_DECLARE],
--[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
--					   [description])))[]dnl
--m4_pushdef([_libtool_name],
--    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
--m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
--    [0], [_libtool_name=[$]$1],
--    [1], [_libtool_name=$lt_[]$1],
--    [2], [_libtool_name=$lt_[]$1],
--    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
--m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
--])
--
--
--# _LT_LIBTOOL_CONFIG_VARS
--# -----------------------
--# Produce commented declarations of non-tagged libtool config variables
--# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
--# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
--# section) are produced by _LT_LIBTOOL_TAG_VARS.
--m4_defun([_LT_LIBTOOL_CONFIG_VARS],
--[m4_foreach([_lt_var],
--    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
--    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
--
--
--# _LT_LIBTOOL_TAG_VARS(TAG)
--# -------------------------
--m4_define([_LT_LIBTOOL_TAG_VARS],
--[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
--    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
--
--
--# _LT_TAGVAR(VARNAME, [TAGNAME])
--# ------------------------------
--m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
--
--
--# _LT_CONFIG_COMMANDS
--# -------------------
--# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
--# variables for single and double quote escaping we saved from calls
--# to _LT_DECL, we can put quote escaped variables declarations
--# into `config.status', and then the shell code to quote escape them in
--# for loops in `config.status'.  Finally, any additional code accumulated
--# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
--m4_defun([_LT_CONFIG_COMMANDS],
--[AC_PROVIDE_IFELSE([LT_OUTPUT],
--	dnl If the libtool generation code has been placed in $CONFIG_LT,
--	dnl instead of duplicating it all over again into config.status,
--	dnl then we will have config.status run $CONFIG_LT later, so it
--	dnl needs to know what name is stored there:
--        [AC_CONFIG_COMMANDS([libtool],
--            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
--    dnl If the libtool generation code is destined for config.status,
--    dnl expand the accumulated commands and init code now:
--    [AC_CONFIG_COMMANDS([libtool],
--        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
--])#_LT_CONFIG_COMMANDS
--
--
--# Initialize.
--m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
--[
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
--
--sed_quote_subst='$sed_quote_subst'
--double_quote_subst='$double_quote_subst'
--delay_variable_subst='$delay_variable_subst'
--_LT_CONFIG_STATUS_DECLARATIONS
--LTCC='$LTCC'
--LTCFLAGS='$LTCFLAGS'
--compiler='$compiler_DEFAULT'
--
--# Quote evaled strings.
--for var in lt_decl_all_varnames([[ \
--]], lt_decl_quote_varnames); do
--    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
--    *[[\\\\\\\`\\"\\\$]]*)
--      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
--      ;;
--    *)
--      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
--      ;;
--    esac
--done
--
--# Double-quote double-evaled strings.
--for var in lt_decl_all_varnames([[ \
--]], lt_decl_dquote_varnames); do
--    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
--    *[[\\\\\\\`\\"\\\$]]*)
--      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
--      ;;
--    *)
--      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
--      ;;
--    esac
--done
--
--# Fix-up fallback echo if it was mangled by the above quoting rules.
--case \$lt_ECHO in
--*'\\\[$]0 --fallback-echo"')dnl "
--  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
--  ;;
--esac
--
--_LT_OUTPUT_LIBTOOL_INIT
--])
--
--
--# LT_OUTPUT
--# ---------
--# This macro allows early generation of the libtool script (before
--# AC_OUTPUT is called), incase it is used in configure for compilation
--# tests.
--AC_DEFUN([LT_OUTPUT],
--[: ${CONFIG_LT=./config.lt}
--AC_MSG_NOTICE([creating $CONFIG_LT])
--cat >"$CONFIG_LT" <<_LTEOF
--#! $SHELL
--# Generated by $as_me.
--# Run this file to recreate a libtool stub with the current configuration.
--
--lt_cl_silent=false
--SHELL=\${CONFIG_SHELL-$SHELL}
--_LTEOF
--
--cat >>"$CONFIG_LT" <<\_LTEOF
--AS_SHELL_SANITIZE
--_AS_PREPARE
--
--exec AS_MESSAGE_FD>&1
--exec AS_MESSAGE_LOG_FD>>config.log
--{
--  echo
--  AS_BOX([Running $as_me.])
--} >&AS_MESSAGE_LOG_FD
--
--lt_cl_help="\
--\`$as_me' creates a local libtool stub from the current configuration,
--for use in further configure time tests before the real libtool is
--generated.
--
--Usage: $[0] [[OPTIONS]]
--
--  -h, --help      print this help, then exit
--  -V, --version   print version number, then exit
--  -q, --quiet     do not print progress messages
--  -d, --debug     don't remove temporary files
--
--Report bugs to <[email protected]>."
--
--lt_cl_version="\
--m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
--m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
--configured by $[0], generated by m4_PACKAGE_STRING.
--
--Copyright (C) 2008 Free Software Foundation, Inc.
--This config.lt script is free software; the Free Software Foundation
--gives unlimited permision to copy, distribute and modify it."
--
--while test $[#] != 0
--do
--  case $[1] in
--    --version | --v* | -V )
--      echo "$lt_cl_version"; exit 0 ;;
--    --help | --h* | -h )
--      echo "$lt_cl_help"; exit 0 ;;
--    --debug | --d* | -d )
--      debug=: ;;
--    --quiet | --q* | --silent | --s* | -q )
--      lt_cl_silent=: ;;
--
--    -*) AC_MSG_ERROR([unrecognized option: $[1]
--Try \`$[0] --help' for more information.]) ;;
--
--    *) AC_MSG_ERROR([unrecognized argument: $[1]
--Try \`$[0] --help' for more information.]) ;;
--  esac
--  shift
--done
--
--if $lt_cl_silent; then
--  exec AS_MESSAGE_FD>/dev/null
--fi
--_LTEOF
--
--cat >>"$CONFIG_LT" <<_LTEOF
--_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
--_LTEOF
--
--cat >>"$CONFIG_LT" <<\_LTEOF
--AC_MSG_NOTICE([creating $ofile])
--_LT_OUTPUT_LIBTOOL_COMMANDS
--AS_EXIT(0)
--_LTEOF
--chmod +x "$CONFIG_LT"
--
--# configure is writing to config.log, but config.lt does its own redirection,
--# appending to config.log, which fails on DOS, as config.log is still kept
--# open by configure.  Here we exec the FD to /dev/null, effectively closing
--# config.log, so it can be properly (re)opened and appended to by config.lt.
--if test "$no_create" != yes; then
--  lt_cl_success=:
--  test "$silent" = yes &&
--    lt_config_lt_args="$lt_config_lt_args --quiet"
--  exec AS_MESSAGE_LOG_FD>/dev/null
--  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
--  exec AS_MESSAGE_LOG_FD>>config.log
--  $lt_cl_success || AS_EXIT(1)
--fi
--])# LT_OUTPUT
--
--
--# _LT_CONFIG(TAG)
--# ---------------
--# If TAG is the built-in tag, create an initial libtool script with a
--# default configuration from the untagged config vars.  Otherwise add code
--# to config.status for appending the configuration named by TAG from the
--# matching tagged config vars.
--m4_defun([_LT_CONFIG],
--[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
--_LT_CONFIG_SAVE_COMMANDS([
--  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
--  m4_if(_LT_TAG, [C], [
--    # See if we are running on zsh, and set the options which allow our
--    # commands through without removal of \ escapes.
--    if test -n "${ZSH_VERSION+set}" ; then
--      setopt NO_GLOB_SUBST
--    fi
--
--    cfgfile="${ofile}T"
--    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
--    $RM "$cfgfile"
--
--    cat <<_LT_EOF >> "$cfgfile"
--#! $SHELL
--
--# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--_LT_COPYING
--_LT_LIBTOOL_TAGS
--
--# ### BEGIN LIBTOOL CONFIG
--_LT_LIBTOOL_CONFIG_VARS
--_LT_LIBTOOL_TAG_VARS
--# ### END LIBTOOL CONFIG
--
--_LT_EOF
--
--  case $host_os in
--  aix3*)
--    cat <<\_LT_EOF >> "$cfgfile"
--# AIX sometimes has problems with the GCC collect2 program.  For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
--  COLLECT_NAMES=
--  export COLLECT_NAMES
--fi
--_LT_EOF
--    ;;
--  esac
--
--  _LT_PROG_LTMAIN
--
--  # We use sed instead of cat because bash on DJGPP gets confused if
--  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
--  # text mode, it properly converts lines to CR/LF.  This bash problem
--  # is reportedly fixed, but why not run on old versions too?
--  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
--    || (rm -f "$cfgfile"; exit 1)
--
--  _LT_PROG_XSI_SHELLFNS
--
--  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
--    || (rm -f "$cfgfile"; exit 1)
--
--  mv -f "$cfgfile" "$ofile" ||
--    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
--  chmod +x "$ofile"
--],
--[cat <<_LT_EOF >> "$ofile"
--
--dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
--dnl in a comment (ie after a #).
--# ### BEGIN LIBTOOL TAG CONFIG: $1
--_LT_LIBTOOL_TAG_VARS(_LT_TAG)
--# ### END LIBTOOL TAG CONFIG: $1
--_LT_EOF
--])dnl /m4_if
--],
--[m4_if([$1], [], [
--    PACKAGE='$PACKAGE'
--    VERSION='$VERSION'
--    TIMESTAMP='$TIMESTAMP'
--    RM='$RM'
--    ofile='$ofile'], [])
--])dnl /_LT_CONFIG_SAVE_COMMANDS
--])# _LT_CONFIG
--
--
--# LT_SUPPORTED_TAG(TAG)
--# ---------------------
--# Trace this macro to discover what tags are supported by the libtool
--# --tag option, using:
--#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
--AC_DEFUN([LT_SUPPORTED_TAG], [])
--
--
--# C support is built-in for now
--m4_define([_LT_LANG_C_enabled], [])
--m4_define([_LT_TAGS], [])
--
--
--# LT_LANG(LANG)
--# -------------
--# Enable libtool support for the given language if not already enabled.
--AC_DEFUN([LT_LANG],
--[AC_BEFORE([$0], [LT_OUTPUT])dnl
--m4_case([$1],
--  [C],			[_LT_LANG(C)],
--  [C++],		[_LT_LANG(CXX)],
--  [Java],		[_LT_LANG(GCJ)],
--  [Fortran 77],		[_LT_LANG(F77)],
--  [Fortran],		[_LT_LANG(FC)],
--  [Windows Resource],	[_LT_LANG(RC)],
--  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
--    [_LT_LANG($1)],
--    [m4_fatal([$0: unsupported language: "$1"])])])dnl
--])# LT_LANG
--
--
--# _LT_LANG(LANGNAME)
--# ------------------
--m4_defun([_LT_LANG],
--[m4_ifdef([_LT_LANG_]$1[_enabled], [],
--  [LT_SUPPORTED_TAG([$1])dnl
--  m4_append([_LT_TAGS], [$1 ])dnl
--  m4_define([_LT_LANG_]$1[_enabled], [])dnl
--  _LT_LANG_$1_CONFIG($1)])dnl
--])# _LT_LANG
--
--
--# _LT_LANG_DEFAULT_CONFIG
--# -----------------------
--m4_defun([_LT_LANG_DEFAULT_CONFIG],
--[AC_PROVIDE_IFELSE([AC_PROG_CXX],
--  [LT_LANG(CXX)],
--  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
--
--AC_PROVIDE_IFELSE([AC_PROG_F77],
--  [LT_LANG(F77)],
--  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
--
--AC_PROVIDE_IFELSE([AC_PROG_FC],
--  [LT_LANG(FC)],
--  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
--
--dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
--dnl pulling things in needlessly.
--AC_PROVIDE_IFELSE([AC_PROG_GCJ],
--  [LT_LANG(GCJ)],
--  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
--    [LT_LANG(GCJ)],
--    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
--      [LT_LANG(GCJ)],
--      [m4_ifdef([AC_PROG_GCJ],
--	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
--       m4_ifdef([A][M_PROG_GCJ],
--	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
--       m4_ifdef([LT_PROG_GCJ],
--	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
--
--AC_PROVIDE_IFELSE([LT_PROG_RC],
--  [LT_LANG(RC)],
--  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
--])# _LT_LANG_DEFAULT_CONFIG
--
--# Obsolete macros:
--AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
--AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
--AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
--AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
--dnl AC_DEFUN([AC_LIBTOOL_F77], [])
--dnl AC_DEFUN([AC_LIBTOOL_FC], [])
--dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
--
--
--# _LT_TAG_COMPILER
--# ----------------
--m4_defun([_LT_TAG_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
--_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
--_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
--_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# If no C compiler flags were specified, use CFLAGS.
--LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_TAG_COMPILER
--
--
--# _LT_COMPILER_BOILERPLATE
--# ------------------------
--# Check for compiler boilerplate output or warnings with
--# the simple compiler test code.
--m4_defun([_LT_COMPILER_BOILERPLATE],
--[m4_require([_LT_DECL_SED])dnl
--ac_outfile=conftest.$ac_objext
--echo "$lt_simple_compile_test_code" >conftest.$ac_ext
--eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
--_lt_compiler_boilerplate=`cat conftest.err`
--$RM conftest*
--])# _LT_COMPILER_BOILERPLATE
--
--
--# _LT_LINKER_BOILERPLATE
--# ----------------------
--# Check for linker boilerplate output or warnings with
--# the simple link test code.
--m4_defun([_LT_LINKER_BOILERPLATE],
--[m4_require([_LT_DECL_SED])dnl
--ac_outfile=conftest.$ac_objext
--echo "$lt_simple_link_test_code" >conftest.$ac_ext
--eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
--_lt_linker_boilerplate=`cat conftest.err`
--$RM -r conftest*
--])# _LT_LINKER_BOILERPLATE
--
--# _LT_REQUIRED_DARWIN_CHECKS
--# -------------------------
--m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
--  case $host_os in
--    rhapsody* | darwin*)
--    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
--    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
--    AC_CHECK_TOOL([LIPO], [lipo], [:])
--    AC_CHECK_TOOL([OTOOL], [otool], [:])
--    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
--    _LT_DECL([], [DSYMUTIL], [1],
--      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
--    _LT_DECL([], [NMEDIT], [1],
--      [Tool to change global to local symbols on Mac OS X])
--    _LT_DECL([], [LIPO], [1],
--      [Tool to manipulate fat objects and archives on Mac OS X])
--    _LT_DECL([], [OTOOL], [1],
--      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
--    _LT_DECL([], [OTOOL64], [1],
--      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
--
--    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
--      [lt_cv_apple_cc_single_mod=no
--      if test -z "${LT_MULTI_MODULE}"; then
--	# By default we will add the -single_module flag. You can override
--	# by either setting the environment variable LT_MULTI_MODULE
--	# non-empty at configure time, or by adding -multi_module to the
--	# link flags.
--	rm -rf libconftest.dylib*
--	echo "int foo(void){return 1;}" > conftest.c
--	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
---dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
--	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
--        _lt_result=$?
--	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
--	  lt_cv_apple_cc_single_mod=yes
--	else
--	  cat conftest.err >&AS_MESSAGE_LOG_FD
--	fi
--	rm -rf libconftest.dylib*
--	rm -f conftest.*
--      fi])
--    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
--      [lt_cv_ld_exported_symbols_list],
--      [lt_cv_ld_exported_symbols_list=no
--      save_LDFLAGS=$LDFLAGS
--      echo "_main" > conftest.sym
--      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
--      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
--	[lt_cv_ld_exported_symbols_list=yes],
--	[lt_cv_ld_exported_symbols_list=no])
--	LDFLAGS="$save_LDFLAGS"
--    ])
--    case $host_os in
--    rhapsody* | darwin1.[[012]])
--      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
--    darwin1.*)
--      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
--    darwin*) # darwin 5.x on
--      # if running on 10.5 or later, the deployment target defaults
--      # to the OS version, if on x86, and 10.4, the deployment
--      # target defaults to 10.4. Don't you love it?
--      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
--	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
--	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
--	10.[[012]]*)
--	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
--	10.*)
--	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
--      esac
--    ;;
--  esac
--    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
--      _lt_dar_single_mod='$single_module'
--    fi
--    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
--      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
--    else
--      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
--    fi
--    if test "$DSYMUTIL" != ":"; then
--      _lt_dsymutil='~$DSYMUTIL $lib || :'
--    else
--      _lt_dsymutil=
--    fi
--    ;;
--  esac
--])
--
--
--# _LT_DARWIN_LINKER_FEATURES
--# --------------------------
--# Checks for linker and compiler features on darwin
--m4_defun([_LT_DARWIN_LINKER_FEATURES],
--[
--  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
--  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
--  _LT_TAGVAR(hardcode_direct, $1)=no
--  _LT_TAGVAR(hardcode_automatic, $1)=yes
--  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
--  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
--  _LT_TAGVAR(link_all_deplibs, $1)=yes
--  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
--  case $cc_basename in
--     ifort*) _lt_dar_can_shared=yes ;;
--     *) _lt_dar_can_shared=$GCC ;;
--  esac
--  if test "$_lt_dar_can_shared" = "yes"; then
--    output_verbose_link_cmd=echo
--    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
--    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
--    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
--    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
--    m4_if([$1], [CXX],
--[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
--      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
--      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
--    fi
--],[])
--  else
--  _LT_TAGVAR(ld_shlibs, $1)=no
--  fi
--])
--
--# _LT_SYS_MODULE_PATH_AIX
--# -----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--m4_defun([_LT_SYS_MODULE_PATH_AIX],
--[m4_require([_LT_DECL_SED])dnl
--AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--lt_aix_libpath_sed='
--    /Import File Strings/,/^$/ {
--	/^0/ {
--	    s/^0  *\(.*\)$/\1/
--	    p
--	}
--    }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
--  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_SYS_MODULE_PATH_AIX
--
--
--# _LT_SHELL_INIT(ARG)
--# -------------------
--m4_define([_LT_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
--	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
--	 [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_SHELL_INIT
--
--
--# _LT_PROG_ECHO_BACKSLASH
--# -----------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--m4_defun([_LT_PROG_ECHO_BACKSLASH],
--[_LT_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$lt_ECHO in
--X*--fallback-echo)
--  # Remove one level of quotation (which was required for Make).
--  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
--  ;;
--esac
--
--ECHO=${lt_ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
--  # Discard the --no-reexec flag, and continue.
--  shift
--elif test "X[$]1" = X--fallback-echo; then
--  # Avoid inline document here, it may be left over
--  :
--elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
--  # Yippee, $ECHO works!
--  :
--else
--  # Restart under the correct shell.
--  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
--  # used as fallback echo
--  shift
--  cat <<_LT_EOF
--[$]*
--_LT_EOF
--  exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
--
--if test -z "$lt_ECHO"; then
--  if test "X${echo_test_string+set}" != Xset; then
--    # find a string as large as possible, as long as the shell can cope with it
--    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
--      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
--      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
--	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
--      then
--        break
--      fi
--    done
--  fi
--
--  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
--     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
--     test "X$echo_testing_string" = "X$echo_test_string"; then
--    :
--  else
--    # The Solaris, AIX, and Digital Unix default echo programs unquote
--    # backslashes.  This makes it impossible to quote backslashes using
--    #   echo "$something" | sed 's/\\/\\\\/g'
--    #
--    # So, first we look for a working echo in the user's PATH.
--
--    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--    for dir in $PATH /usr/ucb; do
--      IFS="$lt_save_ifs"
--      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
--         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
--         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
--         test "X$echo_testing_string" = "X$echo_test_string"; then
--        ECHO="$dir/echo"
--        break
--      fi
--    done
--    IFS="$lt_save_ifs"
--
--    if test "X$ECHO" = Xecho; then
--      # We didn't find a better echo, so look for alternatives.
--      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
--         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
--         test "X$echo_testing_string" = "X$echo_test_string"; then
--        # This shell has a builtin print -r that does the trick.
--        ECHO='print -r'
--      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
--	   test "X$CONFIG_SHELL" != X/bin/ksh; then
--        # If we have ksh, try running configure again with it.
--        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
--        export ORIGINAL_CONFIG_SHELL
--        CONFIG_SHELL=/bin/ksh
--        export CONFIG_SHELL
--        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
--      else
--        # Try using printf.
--        ECHO='printf %s\n'
--        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
--	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
--	   test "X$echo_testing_string" = "X$echo_test_string"; then
--	  # Cool, printf works
--	  :
--        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
--	     test "X$echo_testing_string" = 'X\t' &&
--	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
--	     test "X$echo_testing_string" = "X$echo_test_string"; then
--	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
--	  export CONFIG_SHELL
--	  SHELL="$CONFIG_SHELL"
--	  export SHELL
--	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
--        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
--	     test "X$echo_testing_string" = 'X\t' &&
--	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
--	     test "X$echo_testing_string" = "X$echo_test_string"; then
--	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
--        else
--	  # maybe with a smaller string...
--	  prev=:
--
--	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
--	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
--	    then
--	      break
--	    fi
--	    prev="$cmd"
--	  done
--
--	  if test "$prev" != 'sed 50q "[$]0"'; then
--	    echo_test_string=`eval $prev`
--	    export echo_test_string
--	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
--	  else
--	    # Oops.  We lost completely, so just stick with echo.
--	    ECHO=echo
--	  fi
--        fi
--      fi
--    fi
--  fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--lt_ECHO=$ECHO
--if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
--   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(lt_ECHO)
--])
--_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
--_LT_DECL([], [ECHO], [1],
--    [An echo program that does not interpret backslashes])
--])# _LT_PROG_ECHO_BACKSLASH
--
--
--# _LT_ENABLE_LOCK
--# ---------------
--m4_defun([_LT_ENABLE_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
--  [AS_HELP_STRING([--disable-libtool-lock],
--    [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
--  # Find out which ABI we are using.
--  echo 'int i;' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    case `/usr/bin/file conftest.$ac_objext` in
--      *ELF-32*)
--	HPUX_IA64_MODE="32"
--	;;
--      *ELF-64*)
--	HPUX_IA64_MODE="64"
--	;;
--    esac
--  fi
--  rm -rf conftest*
--  ;;
--*-*-irix6*)
--  # Find out which ABI we are using.
--  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    if test "$lt_cv_prog_gnu_ld" = yes; then
--      case `/usr/bin/file conftest.$ac_objext` in
--	*32-bit*)
--	  LD="${LD-ld} -melf32bsmip"
--	  ;;
--	*N32*)
--	  LD="${LD-ld} -melf32bmipn32"
--	  ;;
--	*64-bit*)
--	  LD="${LD-ld} -melf64bmip"
--	;;
--      esac
--    else
--      case `/usr/bin/file conftest.$ac_objext` in
--	*32-bit*)
--	  LD="${LD-ld} -32"
--	  ;;
--	*N32*)
--	  LD="${LD-ld} -n32"
--	  ;;
--	*64-bit*)
--	  LD="${LD-ld} -64"
--	  ;;
--      esac
--    fi
--  fi
--  rm -rf conftest*
--  ;;
--
--x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
--s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
--  # Find out which ABI we are using.
--  echo 'int i;' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    case `/usr/bin/file conftest.o` in
--      *32-bit*)
--	case $host in
--	  x86_64-*kfreebsd*-gnu)
--	    LD="${LD-ld} -m elf_i386_fbsd"
--	    ;;
--	  x86_64-*linux*)
--	    LD="${LD-ld} -m elf_i386"
--	    ;;
--	  ppc64-*linux*|powerpc64-*linux*)
--	    LD="${LD-ld} -m elf32ppclinux"
--	    ;;
--	  s390x-*linux*)
--	    LD="${LD-ld} -m elf_s390"
--	    ;;
--	  sparc64-*linux*)
--	    LD="${LD-ld} -m elf32_sparc"
--	    ;;
--	esac
--	;;
--      *64-bit*)
--	case $host in
--	  x86_64-*kfreebsd*-gnu)
--	    LD="${LD-ld} -m elf_x86_64_fbsd"
--	    ;;
--	  x86_64-*linux*)
--	    LD="${LD-ld} -m elf_x86_64"
--	    ;;
--	  ppc*-*linux*|powerpc*-*linux*)
--	    LD="${LD-ld} -m elf64ppc"
--	    ;;
--	  s390*-*linux*|s390*-*tpf*)
--	    LD="${LD-ld} -m elf64_s390"
--	    ;;
--	  sparc*-*linux*)
--	    LD="${LD-ld} -m elf64_sparc"
--	    ;;
--	esac
--	;;
--    esac
--  fi
--  rm -rf conftest*
--  ;;
--
--*-*-sco3.2v5*)
--  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
--  SAVE_CFLAGS="$CFLAGS"
--  CFLAGS="$CFLAGS -belf"
--  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
--    [AC_LANG_PUSH(C)
--     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
--     AC_LANG_POP])
--  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
--    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
--    CFLAGS="$SAVE_CFLAGS"
--  fi
--  ;;
--sparc*-*solaris*)
--  # Find out which ABI we are using.
--  echo 'int i;' > conftest.$ac_ext
--  if AC_TRY_EVAL(ac_compile); then
--    case `/usr/bin/file conftest.o` in
--    *64-bit*)
--      case $lt_cv_prog_gnu_ld in
--      yes*) LD="${LD-ld} -m elf64_sparc" ;;
--      *)
--	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
--	  LD="${LD-ld} -64"
--	fi
--	;;
--      esac
--      ;;
--    esac
--  fi
--  rm -rf conftest*
--  ;;
--esac
--
--need_locks="$enable_libtool_lock"
--])# _LT_ENABLE_LOCK
--
--
--# _LT_CMD_OLD_ARCHIVE
--# -------------------
--m4_defun([_LT_CMD_OLD_ARCHIVE],
--[AC_CHECK_TOOL(AR, ar, false)
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--_LT_DECL([], [AR], [1], [The archiver])
--_LT_DECL([], [AR_FLAGS], [1])
--
--AC_CHECK_TOOL(STRIP, strip, :)
--test -z "$STRIP" && STRIP=:
--_LT_DECL([], [STRIP], [1], [A symbol stripping program])
--
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--test -z "$RANLIB" && RANLIB=:
--_LT_DECL([], [RANLIB], [1],
--    [Commands used to install an old-style archive])
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
--  case $host_os in
--  openbsd*)
--    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
--    ;;
--  *)
--    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
--    ;;
--  esac
--  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--_LT_DECL([], [old_postinstall_cmds], [2])
--_LT_DECL([], [old_postuninstall_cmds], [2])
--_LT_TAGDECL([], [old_archive_cmds], [2],
--    [Commands used to build an old-style archive])
--])# _LT_CMD_OLD_ARCHIVE
--
--
--# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([_LT_COMPILER_OPTION],
--[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
--m4_require([_LT_DECL_SED])dnl
--AC_CACHE_CHECK([$1], [$2],
--  [$2=no
--   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
--   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
--   lt_compiler_flag="$3"
--   # Insert the option either (1) after the last *FLAGS variable, or
--   # (2) before a word containing "conftest.", or (3) at the end.
--   # Note that $ac_compile itself does not contain backslashes and begins
--   # with a dollar sign (not a hyphen), so the echo should work correctly.
--   # The option is referenced via a variable to avoid confusing sed.
--   lt_compile=`echo "$ac_compile" | $SED \
--   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
--   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
--   -e 's:$: $lt_compiler_flag:'`
--   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
--   (eval "$lt_compile" 2>conftest.err)
--   ac_status=$?
--   cat conftest.err >&AS_MESSAGE_LOG_FD
--   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
--   if (exit $ac_status) && test -s "$ac_outfile"; then
--     # The compiler can only warn and ignore the option if not recognized
--     # So say no if there are warnings other than the usual output.
--     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
--     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
--     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
--       $2=yes
--     fi
--   fi
--   $RM conftest*
--])
--
--if test x"[$]$2" = xyes; then
--    m4_if([$5], , :, [$5])
--else
--    m4_if([$6], , :, [$6])
--fi
--])# _LT_COMPILER_OPTION
--
--# Old name:
--AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
--
--
--# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--#                  [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------
--# Check whether the given linker option works
--AC_DEFUN([_LT_LINKER_OPTION],
--[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
--m4_require([_LT_DECL_SED])dnl
--AC_CACHE_CHECK([$1], [$2],
--  [$2=no
--   save_LDFLAGS="$LDFLAGS"
--   LDFLAGS="$LDFLAGS $3"
--   echo "$lt_simple_link_test_code" > conftest.$ac_ext
--   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
--     # The linker can only warn and ignore the option if not recognized
--     # So say no if there are warnings
--     if test -s conftest.err; then
--       # Append any errors to the config.log.
--       cat conftest.err 1>&AS_MESSAGE_LOG_FD
--       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
--       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
--       if diff conftest.exp conftest.er2 >/dev/null; then
--         $2=yes
--       fi
--     else
--       $2=yes
--     fi
--   fi
--   $RM -r conftest*
--   LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
--    m4_if([$4], , :, [$4])
--else
--    m4_if([$5], , :, [$5])
--fi
--])# _LT_LINKER_OPTION
--
--# Old name:
--AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
--
--
--# LT_CMD_MAX_LEN
--#---------------
--AC_DEFUN([LT_CMD_MAX_LEN],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
--  i=0
--  teststring="ABCD"
--
--  case $build_os in
--  msdosdjgpp*)
--    # On DJGPP, this test can blow up pretty badly due to problems in libc
--    # (any single argument exceeding 2000 bytes causes a buffer overrun
--    # during glob expansion).  Even if it were fixed, the result of this
--    # check would be larger than it should be.
--    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
--    ;;
--
--  gnu*)
--    # Under GNU Hurd, this test is not required because there is
--    # no limit to the length of command line arguments.
--    # Libtool will interpret -1 as no limit whatsoever
--    lt_cv_sys_max_cmd_len=-1;
--    ;;
--
--  cygwin* | mingw* | cegcc*)
--    # On Win9x/ME, this test blows up -- it succeeds, but takes
--    # about 5 minutes as the teststring grows exponentially.
--    # Worse, since 9x/ME are not pre-emptively multitasking,
--    # you end up with a "frozen" computer, even though with patience
--    # the test eventually succeeds (with a max line length of 256k).
--    # Instead, let's just punt: use the minimum linelength reported by
--    # all of the supported platforms: 8192 (on NT/2K/XP).
--    lt_cv_sys_max_cmd_len=8192;
--    ;;
--
--  amigaos*)
--    # On AmigaOS with pdksh, this test takes hours, literally.
--    # So we just punt and use a minimum line length of 8192.
--    lt_cv_sys_max_cmd_len=8192;
--    ;;
--
--  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
--    # This has been around since 386BSD, at least.  Likely further.
--    if test -x /sbin/sysctl; then
--      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
--    elif test -x /usr/sbin/sysctl; then
--      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
--    else
--      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
--    fi
--    # And add a safety zone
--    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
--    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
--    ;;
--
--  interix*)
--    # We know the value 262144 and hardcode it with a safety zone (like BSD)
--    lt_cv_sys_max_cmd_len=196608
--    ;;
--
--  osf*)
--    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
--    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
--    # nice to cause kernel panics so lets avoid the loop below.
--    # First set a reasonable default.
--    lt_cv_sys_max_cmd_len=16384
--    #
--    if test -x /sbin/sysconfig; then
--      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
--        *1*) lt_cv_sys_max_cmd_len=-1 ;;
--      esac
--    fi
--    ;;
--  sco3.2v5*)
--    lt_cv_sys_max_cmd_len=102400
--    ;;
--  sysv5* | sco5v6* | sysv4.2uw2*)
--    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
--    if test -n "$kargmax"; then
--      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
--    else
--      lt_cv_sys_max_cmd_len=32768
--    fi
--    ;;
--  *)
--    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
--    if test -n "$lt_cv_sys_max_cmd_len"; then
--      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
--      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
--    else
--      # Make teststring a little bigger before we do anything with it.
--      # a 1K string should be a reasonable start.
--      for i in 1 2 3 4 5 6 7 8 ; do
--        teststring=$teststring$teststring
--      done
--      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
--      # If test is not a shell built-in, we'll probably end up computing a
--      # maximum length that is only half of the actual maximum length, but
--      # we can't tell.
--      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
--	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
--	      test $i != 17 # 1/2 MB should be enough
--      do
--        i=`expr $i + 1`
--        teststring=$teststring$teststring
--      done
--      # Only check the string length outside the loop.
--      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
--      teststring=
--      # Add a significant safety factor because C++ compilers can tack on
--      # massive amounts of additional arguments before passing them to the
--      # linker.  It appears as though 1/2 is a usable value.
--      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
--    fi
--    ;;
--  esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
--  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
--  AC_MSG_RESULT(none)
--fi
--max_cmd_len=$lt_cv_sys_max_cmd_len
--_LT_DECL([], [max_cmd_len], [0],
--    [What is the maximum length of a command?])
--])# LT_CMD_MAX_LEN
--
--# Old name:
--AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
--
--
--# _LT_HEADER_DLFCN
--# ----------------
--m4_defun([_LT_HEADER_DLFCN],
--[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
--])# _LT_HEADER_DLFCN
--
--
--# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ----------------------------------------------------------------
--m4_defun([_LT_TRY_DLOPEN_SELF],
--[m4_require([_LT_HEADER_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
--  [$4]
--else
--  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
--  lt_status=$lt_dlunknown
--  cat > conftest.$ac_ext <<_LT_EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--#  define LT_DLGLOBAL		RTLD_GLOBAL
--#else
--#  ifdef DL_GLOBAL
--#    define LT_DLGLOBAL		DL_GLOBAL
--#  else
--#    define LT_DLGLOBAL		0
--#  endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
--   find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--#  ifdef RTLD_LAZY
--#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
--#  else
--#    ifdef DL_LAZY
--#      define LT_DLLAZY_OR_NOW		DL_LAZY
--#    else
--#      ifdef RTLD_NOW
--#        define LT_DLLAZY_OR_NOW	RTLD_NOW
--#      else
--#        ifdef DL_NOW
--#          define LT_DLLAZY_OR_NOW	DL_NOW
--#        else
--#          define LT_DLLAZY_OR_NOW	0
--#        endif
--#      endif
--#    endif
--#  endif
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
--  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
--  int status = $lt_dlunknown;
--
--  if (self)
--    {
--      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
--      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
--      /* dlclose (self); */
--    }
--  else
--    puts (dlerror ());
--
--  return status;
--}]
--_LT_EOF
--  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
--    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
--    lt_status=$?
--    case x$lt_status in
--      x$lt_dlno_uscore) $1 ;;
--      x$lt_dlneed_uscore) $2 ;;
--      x$lt_dlunknown|x*) $3 ;;
--    esac
--  else :
--    # compilation failed
--    $3
--  fi
--fi
--rm -fr conftest*
--])# _LT_TRY_DLOPEN_SELF
--
--
--# LT_SYS_DLOPEN_SELF
--# ------------------
--AC_DEFUN([LT_SYS_DLOPEN_SELF],
--[m4_require([_LT_HEADER_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
--  enable_dlopen=unknown
--  enable_dlopen_self=unknown
--  enable_dlopen_self_static=unknown
--else
--  lt_cv_dlopen=no
--  lt_cv_dlopen_libs=
--
--  case $host_os in
--  beos*)
--    lt_cv_dlopen="load_add_on"
--    lt_cv_dlopen_libs=
--    lt_cv_dlopen_self=yes
--    ;;
--
--  mingw* | pw32* | cegcc*)
--    lt_cv_dlopen="LoadLibrary"
--    lt_cv_dlopen_libs=
--    ;;
--
--  cygwin*)
--    lt_cv_dlopen="dlopen"
--    lt_cv_dlopen_libs=
--    ;;
--
--  darwin*)
--  # if libdl is installed we need to link against it
--    AC_CHECK_LIB([dl], [dlopen],
--		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
--    lt_cv_dlopen="dyld"
--    lt_cv_dlopen_libs=
--    lt_cv_dlopen_self=yes
--    ])
--    ;;
--
--  *)
--    AC_CHECK_FUNC([shl_load],
--	  [lt_cv_dlopen="shl_load"],
--      [AC_CHECK_LIB([dld], [shl_load],
--	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
--	[AC_CHECK_FUNC([dlopen],
--	      [lt_cv_dlopen="dlopen"],
--	  [AC_CHECK_LIB([dl], [dlopen],
--		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
--	    [AC_CHECK_LIB([svld], [dlopen],
--		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
--	      [AC_CHECK_LIB([dld], [dld_link],
--		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
--	      ])
--	    ])
--	  ])
--	])
--      ])
--    ;;
--  esac
--
--  if test "x$lt_cv_dlopen" != xno; then
--    enable_dlopen=yes
--  else
--    enable_dlopen=no
--  fi
--
--  case $lt_cv_dlopen in
--  dlopen)
--    save_CPPFLAGS="$CPPFLAGS"
--    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
--    save_LDFLAGS="$LDFLAGS"
--    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
--    save_LIBS="$LIBS"
--    LIBS="$lt_cv_dlopen_libs $LIBS"
--
--    AC_CACHE_CHECK([whether a program can dlopen itself],
--	  lt_cv_dlopen_self, [dnl
--	  _LT_TRY_DLOPEN_SELF(
--	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
--	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
--    ])
--
--    if test "x$lt_cv_dlopen_self" = xyes; then
--      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
--      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
--	  lt_cv_dlopen_self_static, [dnl
--	  _LT_TRY_DLOPEN_SELF(
--	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
--	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
--      ])
--    fi
--
--    CPPFLAGS="$save_CPPFLAGS"
--    LDFLAGS="$save_LDFLAGS"
--    LIBS="$save_LIBS"
--    ;;
--  esac
--
--  case $lt_cv_dlopen_self in
--  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
--  *) enable_dlopen_self=unknown ;;
--  esac
--
--  case $lt_cv_dlopen_self_static in
--  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
--  *) enable_dlopen_self_static=unknown ;;
--  esac
--fi
--_LT_DECL([dlopen_support], [enable_dlopen], [0],
--	 [Whether dlopen is supported])
--_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
--	 [Whether dlopen of programs is supported])
--_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
--	 [Whether dlopen of statically linked programs is supported])
--])# LT_SYS_DLOPEN_SELF
--
--# Old name:
--AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
--
--
--# _LT_COMPILER_C_O([TAGNAME])
--# ---------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler.
--# This macro does not hard code the compiler like AC_PROG_CC_C_O.
--m4_defun([_LT_COMPILER_C_O],
--[m4_require([_LT_DECL_SED])dnl
--m4_require([_LT_FILEUTILS_DEFAULTS])dnl
--m4_require([_LT_TAG_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
--  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
--  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
--   $RM -r conftest 2>/dev/null
--   mkdir conftest
--   cd conftest
--   mkdir out
--   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
--
--   lt_compiler_flag="-o out/conftest2.$ac_objext"
--   # Insert the option either (1) after the last *FLAGS variable, or
--   # (2) before a word containing "conftest.", or (3) at the end.
--   # Note that $ac_compile itself does not contain backslashes and begins
--   # with a dollar sign (not a hyphen), so the echo should work correctly.
--   lt_compile=`echo "$ac_compile" | $SED \
--   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
--   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
--   -e 's:$: $lt_compiler_flag:'`
--   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
--   (eval "$lt_compile" 2>out/conftest.err)
--   ac_status=$?
--   cat out/conftest.err >&AS_MESSAGE_LOG_FD
--   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
--   if (exit $ac_status) && test -s out/conftest2.$ac_objext
--   then
--     # The compiler can only warn and ignore the option if not recognized
--     # So say no if there are warnings
--     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
--     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
--     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
--       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--     fi
--   fi
--   chmod u+w . 2>&AS_MESSAGE_LOG_FD
--   $RM conftest*
--   # SGI C++ compiler will create directory out/ii_files/ for
--   # template instantiation
--   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
--   $RM out/* && rmdir out
--   cd ..
--   $RM -r conftest
--   $RM conftest*
--])
--_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
--	[Does compiler simultaneously support -c and -o options?])
--])# _LT_COMPILER_C_O
--
--
--# _LT_COMPILER_FILE_LOCKS([TAGNAME])
--# ----------------------------------
--# Check to see if we can do hard links to lock some files if needed
--m4_defun([_LT_COMPILER_FILE_LOCKS],
--[m4_require([_LT_ENABLE_LOCK])dnl
--m4_require([_LT_FILEUTILS_DEFAULTS])dnl
--_LT_COMPILER_C_O([$1])
--
--hard_links="nottested"
--if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
--  # do not overwrite the value of need_locks provided by the user
--  AC_MSG_CHECKING([if we can lock with hard links])
--  hard_links=yes
--  $RM conftest*
--  ln conftest.a conftest.b 2>/dev/null && hard_links=no
--  touch conftest.a
--  ln conftest.a conftest.b 2>&5 || hard_links=no
--  ln conftest.a conftest.b 2>/dev/null && hard_links=no
--  AC_MSG_RESULT([$hard_links])
--  if test "$hard_links" = no; then
--    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
--    need_locks=warn
--  fi
--else
--  need_locks=no
--fi
--_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
--])# _LT_COMPILER_FILE_LOCKS
--
--
--# _LT_CHECK_OBJDIR
--# ----------------
--m4_defun([_LT_CHECK_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
--  lt_cv_objdir=.libs
--else
--  # MS-DOS does not allow filenames that begin with a dot.
--  lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--_LT_DECL([], [objdir], [0],
--         [The name of the directory that contains temporary libtool files])dnl
--m4_pattern_allow([LT_OBJDIR])dnl
--AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
--  [Define to the sub-directory in which libtool stores uninstalled libraries.])
--])# _LT_CHECK_OBJDIR
--
--
--# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
--# --------------------------------------
--# Check hardcoding attributes.
--m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
--   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
--   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
--
--  # We can hardcode non-existent directories.
--  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
--     # If the only mechanism to avoid hardcoding is shlibpath_var, we
--     # have to relink, otherwise we might link with an installed library
--     # when we should be linking with a yet-to-be-installed one
--     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
--     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
--    # Linking always hardcodes the temporary library directory.
--    _LT_TAGVAR(hardcode_action, $1)=relink
--  else
--    # We can link without hardcoding, and we can hardcode nonexisting dirs.
--    _LT_TAGVAR(hardcode_action, $1)=immediate
--  fi
--else
--  # We cannot hardcode anything, or else we can only hardcode existing
--  # directories.
--  _LT_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
--   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
--  # Fast installation is not supported
--  enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
--     test "$enable_shared" = no; then
--  # Fast installation is not necessary
--  enable_fast_install=needless
--fi
--_LT_TAGDECL([], [hardcode_action], [0],
--    [How to hardcode a shared library path into an executable])
--])# _LT_LINKER_HARDCODE_LIBPATH
--
--
--# _LT_CMD_STRIPLIB
--# ----------------
--m4_defun([_LT_CMD_STRIPLIB],
--[m4_require([_LT_DECL_EGREP])
--striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
--  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
--  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
--  AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
--  case $host_os in
--  darwin*)
--    if test -n "$STRIP" ; then
--      striplib="$STRIP -x"
--      old_striplib="$STRIP -S"
--      AC_MSG_RESULT([yes])
--    else
--      AC_MSG_RESULT([no])
--    fi
--    ;;
--  *)
--    AC_MSG_RESULT([no])
--    ;;
--  esac
--fi
--_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
--_LT_DECL([], [striplib], [1])
--])# _LT_CMD_STRIPLIB
--
--
--# _LT_SYS_DYNAMIC_LINKER([TAG])
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--m4_defun([_LT_SYS_DYNAMIC_LINKER],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--m4_require([_LT_DECL_EGREP])dnl
--m4_require([_LT_FILEUTILS_DEFAULTS])dnl
--m4_require([_LT_DECL_OBJDUMP])dnl
--m4_require([_LT_DECL_SED])dnl
--AC_MSG_CHECKING([dynamic linker characteristics])
--m4_if([$1],
--	[], [
--if test "$GCC" = yes; then
--  case $host_os in
--    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
--    *) lt_awk_arg="/^libraries:/" ;;
--  esac
--  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
--  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
--    # if the path contains ";" then we assume it to be the separator
--    # otherwise default to the standard path separator (i.e. ":") - it is
--    # assumed that no part of a normal pathname contains ";" but that should
--    # okay in the real world where ";" in dirpaths is itself problematic.
--    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
--  else
--    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
--  fi
--  # Ok, now we have the path, separated by spaces, we can step through it
--  # and add multilib dir if necessary.
--  lt_tmp_lt_search_path_spec=
--  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
--  for lt_sys_path in $lt_search_path_spec; do
--    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
--      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
--    else
--      test -d "$lt_sys_path" && \
--	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
--    fi
--  done
--  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
--BEGIN {RS=" "; FS="/|\n";} {
--  lt_foo="";
--  lt_count=0;
--  for (lt_i = NF; lt_i > 0; lt_i--) {
--    if ($lt_i != "" && $lt_i != ".") {
--      if ($lt_i == "..") {
--        lt_count++;
--      } else {
--        if (lt_count == 0) {
--          lt_foo="/" $lt_i lt_foo;
--        } else {
--          lt_count--;
--        }
--      }
--    }
--  }
--  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
--  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
--}'`
--  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
--else
--  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext_cmds=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
--  version_type=linux
--  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
--  shlibpath_var=LIBPATH
--
--  # AIX 3 has no versioning support, so we append a major version to the name.
--  soname_spec='${libname}${release}${shared_ext}$major'
--  ;;
--
--aix[[4-9]]*)
--  version_type=linux
--  need_lib_prefix=no
--  need_version=no
--  hardcode_into_libs=yes
--  if test "$host_cpu" = ia64; then
--    # AIX 5 supports IA64
--    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
--    shlibpath_var=LD_LIBRARY_PATH
--  else
--    # With GCC up to 2.95.x, collect2 would create an import file
--    # for dependence libraries.  The import file would start with
--    # the line `#! .'.  This would cause the generated library to
--    # depend on `.', always an invalid library.  This was fixed in
--    # development snapshots of GCC prior to 3.0.
--    case $host_os in
--      aix4 | aix4.[[01]] | aix4.[[01]].*)
--      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
--	   echo ' yes '
--	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
--	:
--      else
--	can_build_shared=no
--      fi
--      ;;
--    esac
--    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
--    # soname into executable. Probably we can add versioning support to
--    # collect2, so additional links can be useful in future.
--    if test "$aix_use_runtimelinking" = yes; then
--      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
--      # instead of lib<name>.a to let people know that these are not
--      # typical AIX shared libraries.
--      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--    else
--      # We preserve .a as extension for shared libraries through AIX4.2
--      # and later when we are not doing run time linking.
--      library_names_spec='${libname}${release}.a $libname.a'
--      soname_spec='${libname}${release}${shared_ext}$major'
--    fi
--    shlibpath_var=LIBPATH
--  fi
--  ;;
--
--amigaos*)
--  case $host_cpu in
--  powerpc)
--    # Since July 2007 AmigaOS4 officially supports .so libraries.
--    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
--    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--    ;;
--  m68k)
--    library_names_spec='$libname.ixlibrary $libname.a'
--    # Create ${libname}_ixlibrary.a entries in /sys/libs.
--    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
--    ;;
--  esac
--  ;;
--
--beos*)
--  library_names_spec='${libname}${shared_ext}'
--  dynamic_linker="$host_os ld.so"
--  shlibpath_var=LIBRARY_PATH
--  ;;
--
--bsdi[[45]]*)
--  version_type=linux
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
--  shlibpath_var=LD_LIBRARY_PATH
--  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
--  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
--  # the default ld.so.conf also contains /usr/contrib/lib and
--  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
--  # libtool to hard-code these into programs
--  ;;
--
--cygwin* | mingw* | pw32* | cegcc*)
--  version_type=windows
--  shrext_cmds=".dll"
--  need_version=no
--  need_lib_prefix=no
--
--  case $GCC,$host_os in
--  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
--    library_names_spec='$libname.dll.a'
--    # DLL is installed to $(libdir)/../bin by postinstall_cmds
--    postinstall_cmds='base_file=`basename \${file}`~
--      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
--      dldir=$destdir/`dirname \$dlpath`~
--      test -d \$dldir || mkdir -p \$dldir~
--      $install_prog $dir/$dlname \$dldir/$dlname~
--      chmod a+x \$dldir/$dlname~
--      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
--        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
--      fi'
--    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
--      dlpath=$dir/\$dldll~
--       $RM \$dlpath'
--    shlibpath_overrides_runpath=yes
--
--    case $host_os in
--    cygwin*)
--      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
--      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
--      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
--      ;;
--    mingw* | cegcc*)
--      # MinGW DLLs use traditional 'lib' prefix
--      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
--      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
--      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
--        # It is most probably a Windows format PATH printed by
--        # mingw gcc, but we are running on Cygwin. Gcc prints its search
--        # path with ; separators, and with drive letters. We can handle the
--        # drive letters (cygwin fileutils understands them), so leave them,
--        # especially as we might pass files found there to a mingw objdump,
--        # which wouldn't understand a cygwinified path. Ahh.
--        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
--      else
--        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
--      fi
--      ;;
--    pw32*)
--      # pw32 DLLs use 'pw' prefix rather than 'lib'
--      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
--      ;;
--    esac
--    ;;
--
--  *)
--    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
--    ;;
--  esac
--  dynamic_linker='Win32 ld.exe'
--  # FIXME: first we should search . and the directory the executable is in
--  shlibpath_var=PATH
--  ;;
--
--darwin* | rhapsody*)
--  dynamic_linker="$host_os dyld"
--  version_type=darwin
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
--  soname_spec='${libname}${release}${major}$shared_ext'
--  shlibpath_overrides_runpath=yes
--  shlibpath_var=DYLD_LIBRARY_PATH
--  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
--m4_if([$1], [],[
--  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
--  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
--  ;;
--
--dgux*)
--  version_type=linux
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  shlibpath_var=LD_LIBRARY_PATH
--  ;;
--
--freebsd1*)
--  dynamic_linker=no
--  ;;
--
--freebsd* | dragonfly*)
--  # DragonFly does not have aout.  When/if they implement a new
--  # versioning mechanism, adjust this.
--  if test -x /usr/bin/objformat; then
--    objformat=`/usr/bin/objformat`
--  else
--    case $host_os in
--    freebsd[[123]]*) objformat=aout ;;
--    *) objformat=elf ;;
--    esac
--  fi
--  version_type=freebsd-$objformat
--  case $version_type in
--    freebsd-elf*)
--      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
--      need_version=no
--      need_lib_prefix=no
--      ;;
--    freebsd-*)
--      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
--      need_version=yes
--      ;;
--  esac
--  shlibpath_var=LD_LIBRARY_PATH
--  case $host_os in
--  freebsd2*)
--    shlibpath_overrides_runpath=yes
--    ;;
--  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
--    shlibpath_overrides_runpath=yes
--    hardcode_into_libs=yes
--    ;;
--  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
--  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
--    shlibpath_overrides_runpath=no
--    hardcode_into_libs=yes
--    ;;
--  *) # from 4.6 on, and DragonFly
--    shlibpath_overrides_runpath=yes
--    hardcode_into_libs=yes
--    ;;
--  esac
--  ;;
--
--gnu*)
--  version_type=linux
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  shlibpath_var=LD_LIBRARY_PATH
--  hardcode_into_libs=yes
--  ;;
--
--hpux9* | hpux10* | hpux11*)
--  # Give a soname corresponding to the major version so that dld.sl refuses to
--  # link against other versions.
--  version_type=sunos
--  need_lib_prefix=no
--  need_version=no
--  case $host_cpu in
--  ia64*)
--    shrext_cmds='.so'
--    hardcode_into_libs=yes
--    dynamic_linker="$host_os dld.so"
--    shlibpath_var=LD_LIBRARY_PATH
--    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
--    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--    soname_spec='${libname}${release}${shared_ext}$major'
--    if test "X$HPUX_IA64_MODE" = X32; then
--      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
--    else
--      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
--    fi
--    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
--    ;;
--  hppa*64*)
--    shrext_cmds='.sl'
--    hardcode_into_libs=yes
--    dynamic_linker="$host_os dld.sl"
--    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
--    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
--    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--    soname_spec='${libname}${release}${shared_ext}$major'
--    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
--    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
--    ;;
--  *)
--    shrext_cmds='.sl'
--    dynamic_linker="$host_os dld.sl"
--    shlibpath_var=SHLIB_PATH
--    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
--    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--    soname_spec='${libname}${release}${shared_ext}$major'
--    ;;
--  esac
--  # HP-UX runs *really* slowly unless shared libraries are mode 555.
--  postinstall_cmds='chmod 555 $lib'
--  ;;
--
--interix[[3-9]]*)
--  version_type=linux
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=no
--  hardcode_into_libs=yes
--  ;;
--
--irix5* | irix6* | nonstopux*)
--  case $host_os in
--    nonstopux*) version_type=nonstopux ;;
--    *)
--	if test "$lt_cv_prog_gnu_ld" = yes; then
--		version_type=linux
--	else
--		version_type=irix
--	fi ;;
--  esac
--  need_lib_prefix=no
--  need_version=no
--  soname_spec='${libname}${release}${shared_ext}$major'
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
--  case $host_os in
--  irix5* | nonstopux*)
--    libsuff= shlibsuff=
--    ;;
--  *)
--    case $LD in # libtool.m4 will add one of these switches to LD
--    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
--      libsuff= shlibsuff= libmagic=32-bit;;
--    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
--      libsuff=32 shlibsuff=N32 libmagic=N32;;
--    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
--      libsuff=64 shlibsuff=64 libmagic=64-bit;;
--    *) libsuff= shlibsuff= libmagic=never-match;;
--    esac
--    ;;
--  esac
--  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
--  shlibpath_overrides_runpath=no
--  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
--  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
--  hardcode_into_libs=yes
--  ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
--  dynamic_linker=no
--  ;;
--
--# This must be Linux ELF.
--linux* | k*bsd*-gnu)
--  version_type=linux
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=no
--  # Some binutils ld are patched to set DT_RUNPATH
--  save_LDFLAGS=$LDFLAGS
--  save_libdir=$libdir
--  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
--       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
--  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
--    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
--       [shlibpath_overrides_runpath=yes])])
--  LDFLAGS=$save_LDFLAGS
--  libdir=$save_libdir
--
--  # This implies no fast_install, which is unacceptable.
--  # Some rework will be needed to allow for fast_install
--  # before this can be enabled.
--  hardcode_into_libs=yes
--
--  # Append ld.so.conf contents to the search path
--  if test -f /etc/ld.so.conf; then
--    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
--    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
--  fi
--
--  # We used to test for /lib/ld.so.1 and disable shared libraries on
--  # powerpc, because MkLinux only supported shared libraries with the
--  # GNU dynamic linker.  Since this was broken with cross compilers,
--  # most powerpc-linux boxes support dynamic linking these days and
--  # people can always --disable-shared, the test was removed, and we
--  # assume the GNU/Linux dynamic linker is in use.
--  dynamic_linker='GNU/Linux ld.so'
--  ;;
--
--netbsd*)
--  version_type=sunos
--  need_lib_prefix=no
--  need_version=no
--  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
--    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
--    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
--    dynamic_linker='NetBSD (a.out) ld.so'
--  else
--    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
--    soname_spec='${libname}${release}${shared_ext}$major'
--    dynamic_linker='NetBSD ld.elf_so'
--  fi
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=yes
--  hardcode_into_libs=yes
--  ;;
--
--newsos6)
--  version_type=linux
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=yes
--  ;;
--
--*nto* | *qnx*)
--  version_type=qnx
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=no
--  hardcode_into_libs=yes
--  dynamic_linker='ldqnx.so'
--  ;;
--
--openbsd*)
--  version_type=sunos
--  sys_lib_dlsearch_path_spec="/usr/lib"
--  need_lib_prefix=no
--  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
--  case $host_os in
--    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
--    *)				need_version=no  ;;
--  esac
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
--  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
--  shlibpath_var=LD_LIBRARY_PATH
--  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
--    case $host_os in
--      openbsd2.[[89]] | openbsd2.[[89]].*)
--	shlibpath_overrides_runpath=no
--	;;
--      *)
--	shlibpath_overrides_runpath=yes
--	;;
--      esac
--  else
--    shlibpath_overrides_runpath=yes
--  fi
--  ;;
--
--os2*)
--  libname_spec='$name'
--  shrext_cmds=".dll"
--  need_lib_prefix=no
--  library_names_spec='$libname${shared_ext} $libname.a'
--  dynamic_linker='OS/2 ld.exe'
--  shlibpath_var=LIBPATH
--  ;;
--
--osf3* | osf4* | osf5*)
--  version_type=osf
--  need_lib_prefix=no
--  need_version=no
--  soname_spec='${libname}${release}${shared_ext}$major'
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  shlibpath_var=LD_LIBRARY_PATH
--  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
--  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
--  ;;
--
--rdos*)
--  dynamic_linker=no
--  ;;
--
--solaris*)
--  version_type=linux
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=yes
--  hardcode_into_libs=yes
--  # ldd complains unless libraries are executable
--  postinstall_cmds='chmod +x $lib'
--  ;;
--
--sunos4*)
--  version_type=sunos
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
--  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=yes
--  if test "$with_gnu_ld" = yes; then
--    need_lib_prefix=no
--  fi
--  need_version=yes
--  ;;
--
--sysv4 | sysv4.3*)
--  version_type=linux
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  shlibpath_var=LD_LIBRARY_PATH
--  case $host_vendor in
--    sni)
--      shlibpath_overrides_runpath=no
--      need_lib_prefix=no
--      runpath_var=LD_RUN_PATH
--      ;;
--    siemens)
--      need_lib_prefix=no
--      ;;
--    motorola)
--      need_lib_prefix=no
--      need_version=no
--      shlibpath_overrides_runpath=no
--      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
--      ;;
--  esac
--  ;;
--
--sysv4*MP*)
--  if test -d /usr/nec ;then
--    version_type=linux
--    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
--    soname_spec='$libname${shared_ext}.$major'
--    shlibpath_var=LD_LIBRARY_PATH
--  fi
--  ;;
--
--sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
--  version_type=freebsd-elf
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=yes
--  hardcode_into_libs=yes
--  if test "$with_gnu_ld" = yes; then
--    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
--  else
--    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
--    case $host_os in
--      sco3.2v5*)
--        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
--	;;
--    esac
--  fi
--  sys_lib_dlsearch_path_spec='/usr/lib'
--  ;;
--
--tpf*)
--  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
--  version_type=linux
--  need_lib_prefix=no
--  need_version=no
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  shlibpath_var=LD_LIBRARY_PATH
--  shlibpath_overrides_runpath=no
--  hardcode_into_libs=yes
--  ;;
--
--uts4*)
--  version_type=linux
--  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
--  soname_spec='${libname}${release}${shared_ext}$major'
--  shlibpath_var=LD_LIBRARY_PATH
--  ;;
--
--*)
--  dynamic_linker=no
--  ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
--  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
--  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
--fi
--if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
--  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
--fi
--
--_LT_DECL([], [variables_saved_for_relink], [1],
--    [Variables whose values should be saved in libtool wrapper scripts and
--    restored at link time])
--_LT_DECL([], [need_lib_prefix], [0],
--    [Do we need the "lib" prefix for modules?])
--_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
--_LT_DECL([], [version_type], [0], [Library versioning type])
--_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
--_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
--_LT_DECL([], [shlibpath_overrides_runpath], [0],
--    [Is shlibpath searched before the hard-coded library search path?])
--_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
--_LT_DECL([], [library_names_spec], [1],
--    [[List of archive names.  First name is the real one, the rest are links.
--    The last name is the one that the linker finds with -lNAME]])
--_LT_DECL([], [soname_spec], [1],
--    [[The coded name of the library, if different from the real name]])
--_LT_DECL([], [postinstall_cmds], [2],
--    [Command to use after installation of a shared archive])
--_LT_DECL([], [postuninstall_cmds], [2],
--    [Command to use after uninstallation of a shared archive])
--_LT_DECL([], [finish_cmds], [2],
--    [Commands used to finish a libtool library installation in a directory])
--_LT_DECL([], [finish_eval], [1],
--    [[As "finish_cmds", except a single script fragment to be evaled but
--    not shown]])
--_LT_DECL([], [hardcode_into_libs], [0],
--    [Whether we should hardcode library paths into libraries])
--_LT_DECL([], [sys_lib_search_path_spec], [2],
--    [Compile-time system search path for libraries])
--_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
--    [Run-time system search path for libraries])
--])# _LT_SYS_DYNAMIC_LINKER
--
--
--# _LT_PATH_TOOL_PREFIX(TOOL)
--# --------------------------
--# find a file program which can recognize shared library
--AC_DEFUN([_LT_PATH_TOOL_PREFIX],
--[m4_require([_LT_DECL_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] |  ?:[\\/]*])
--  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
--  ;;
--*)
--  lt_save_MAGIC_CMD="$MAGIC_CMD"
--  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word.  This closes a longstanding sh security hole.
--  ac_dummy="m4_if([$2], , $PATH, [$2])"
--  for ac_dir in $ac_dummy; do
--    IFS="$lt_save_ifs"
--    test -z "$ac_dir" && ac_dir=.
--    if test -f $ac_dir/$1; then
--      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
--      if test -n "$file_magic_test_file"; then
--	case $deplibs_check_method in
--	"file_magic "*)
--	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
--	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
--	    $EGREP "$file_magic_regex" > /dev/null; then
--	    :
--	  else
--	    cat <<_LT_EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such.  This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem.  Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** [email protected]
--
--_LT_EOF
--	  fi ;;
--	esac
--      fi
--      break
--    fi
--  done
--  IFS="$lt_save_ifs"
--  MAGIC_CMD="$lt_save_MAGIC_CMD"
--  ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
--  AC_MSG_RESULT($MAGIC_CMD)
--else
--  AC_MSG_RESULT(no)
--fi
--_LT_DECL([], [MAGIC_CMD], [0],
--	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
--])# _LT_PATH_TOOL_PREFIX
--
--# Old name:
--AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
--
--
--# _LT_PATH_MAGIC
--# --------------
--# find a file program which can recognize a shared library
--m4_defun([_LT_PATH_MAGIC],
--[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
--  if test -n "$ac_tool_prefix"; then
--    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
--  else
--    MAGIC_CMD=:
--  fi
--fi
--])# _LT_PATH_MAGIC
--
--
--# LT_PATH_LD
--# ----------
--# find the pathname to the GNU or non-GNU linker
--AC_DEFUN([LT_PATH_LD],
--[AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--m4_require([_LT_DECL_SED])dnl
--m4_require([_LT_DECL_EGREP])dnl
--
--AC_ARG_WITH([gnu-ld],
--    [AS_HELP_STRING([--with-gnu-ld],
--	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
--    [test "$withval" = no || with_gnu_ld=yes],
--    [with_gnu_ld=no])dnl
--
--ac_prog=ld
--if test "$GCC" = yes; then
--  # Check if gcc -print-prog-name=ld gives a path.
--  AC_MSG_CHECKING([for ld used by $CC])
--  case $host in
--  *-*-mingw*)
--    # gcc leaves a trailing carriage return which upsets mingw
--    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
--  *)
--    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
--  esac
--  case $ac_prog in
--    # Accept absolute paths.
--    [[\\/]]* | ?:[[\\/]]*)
--      re_direlt='/[[^/]][[^/]]*/\.\./'
--      # Canonicalize the pathname of ld
--      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
--      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
--	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
--      done
--      test -z "$LD" && LD="$ac_prog"
--      ;;
--  "")
--    # If it fails, then pretend we aren't using GCC.
--    ac_prog=ld
--    ;;
--  *)
--    # If it is relative, then search for the first ld in PATH.
--    with_gnu_ld=unknown
--    ;;
--  esac
--elif test "$with_gnu_ld" = yes; then
--  AC_MSG_CHECKING([for GNU ld])
--else
--  AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
--  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--  for ac_dir in $PATH; do
--    IFS="$lt_save_ifs"
--    test -z "$ac_dir" && ac_dir=.
--    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
--      lt_cv_path_LD="$ac_dir/$ac_prog"
--      # Check to see if the program is GNU ld.  I'd rather use --version,
--      # but apparently some variants of GNU ld only accept -v.
--      # Break only if it was the GNU/non-GNU ld that we prefer.
--      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
--      *GNU* | *'with BFD'*)
--	test "$with_gnu_ld" != no && break
--	;;
--      *)
--	test "$with_gnu_ld" != yes && break
--	;;
--      esac
--    fi
--  done
--  IFS="$lt_save_ifs"
--else
--  lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
--  AC_MSG_RESULT($LD)
--else
--  AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--_LT_PATH_LD_GNU
--AC_SUBST([LD])
--
--_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
--])# LT_PATH_LD
--
--# Old names:
--AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
--AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
--dnl aclocal-1.4 backwards compatibility:
--dnl AC_DEFUN([AM_PROG_LD], [])
--dnl AC_DEFUN([AC_PROG_LD], [])
--
--
--# _LT_PATH_LD_GNU
--#- --------------
--m4_defun([_LT_PATH_LD_GNU],
--[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU lds only accept -v.
--case `$LD -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
--  lt_cv_prog_gnu_ld=yes
--  ;;
--*)
--  lt_cv_prog_gnu_ld=no
--  ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# _LT_PATH_LD_GNU
--
--
--# _LT_CMD_RELOAD
--# --------------
--# find reload flag for linker
--#   -- PORTME Some linkers may need a different reload flag.
--m4_defun([_LT_CMD_RELOAD],
--[AC_CACHE_CHECK([for $LD option to reload object files],
--  lt_cv_ld_reload_flag,
--  [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--case $host_os in
--  darwin*)
--    if test "$GCC" = yes; then
--      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
--    else
--      reload_cmds='$LD$reload_flag -o $output$reload_objs'
--    fi
--    ;;
--esac
--_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
--_LT_DECL([], [reload_cmds], [2])dnl
--])# _LT_CMD_RELOAD
--
--
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

meta-oe/recipes-support/libiconv/libiconv.inc deleted +0 -14
deleted file mode 100644
index e3e8e11..0000000

Lines of this file are not shown. View the raw message.

meta-oe/recipes-support/libiconv/libiconv_1.13.1.bb deleted +0 -25
deleted file mode 100644
index 35f4e2d..0000000

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.7.4.1

Part of the diff is not shown here. View the raw message.