Skip to contentSkip to conversation

AT91: boards still broken on 02.Aug.2011

U-Boot Reinhard Meyer 4 participants 7 messages Aug 2, 2011 – Aug 4, 2011

lore
Share & tools
lore

Reinhard Meyer

author
#0 lore raw

./MAKEALL at91

--------------------- SUMMARY ---------------------------- Boards compiled: 48
Boards with warnings or errors: 11 ( at91cap9adk meesc meesc_dataflash pm9261 pm9263 at91sam9263ek at91sam9m10g45ek pm9g45 SBC35_A9G20 TNY_A9260 TNY_A9G20 )
----------------------------------------------------------

Verbose output of broken boards:

Configuring for at91cap9adk board... at91cap9_devices.c:33:25: fatal error: asm/arch/io.h: Datei oder Verzeichnis nicht gefunden
compilation terminated.
clock.c:21:3: error: #error You need to define CONFIG_AT91FAMILY in your board config!
timer.c:34:3: error: #error You need to define CONFIG_AT91FAMILY in your board config!
make[1]: *** Keine Regel vorhanden, um das Target ?.depend?,
ben?tigt von ?all?, zu erstellen. Schluss.
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for meesc - Board: meesc, Options:
AT91SAM9263,SYS_USE_NANDFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for meesc_dataflash - Board: meesc, Options:
AT91SAM9263,SYS_USE_DATAFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for pm9261 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9261_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9261_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9261_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for pm9263 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for at91sam9263ek board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for at91sam9m10g45ek board... at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9m10g45ek.h:36:0: note: this is the location of the previous definition at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for pm9g45 board... at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9g45.h:35:0:
note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for SBC35_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/sbc35_a9g20.h:47:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for TNY_A9260 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for TNY_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Best Regards,
Reinhard

#1 lore raw

Le Tue, 02 Aug 2011 12:37:41 +0000, Reinhard Meyer <[email protected]> a ?crit :

Quoted 1 line

Configuring for at91sam9m10g45ek board...

For this board there are patches from Alex Waterman, sent on June, 30th. They fix the compilation, and they mostly work (there is an issue with the Ethernet device, though).

Since Alex hasn't posted an updated version of his patch set since one month, should I take his patch set, fix the comments you made at that time and send an updated version ?

(I have the AT91SAM9M10G45-EK platform on my desk here).

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
author
#2 lore raw

Dear Thomas Petazzoni,

Quoted 9 lines

Le Tue, 02 Aug 2011 12:37:41 +0000, Reinhard Meyer <[email protected]> a ?crit :

Quoted 1 line

Configuring for at91sam9m10g45ek board...

For this board there are patches from Alex Waterman, sent on June, 30th. They fix the compilation, and they mostly work (there is an issue with the Ethernet device, though).

Quoted 5 lines

Since Alex hasn't posted an updated version of his patch set since one month, should I take his patch set, fix the comments you made at that time and send an updated version ?

(I have the AT91SAM9M10G45-EK platform on my desk here).

Unless Atmel NAKs this approach, I am fine with it.

Please re-base them on current u-boot-atmel/master and provide two independent patches:
1. for the SoC parts
2. for the board itself

Thanks,
Reinhard

#3 lore raw

Hi Reinhard & Thomas,

Quoted 10 lines · Reinhard Meyer

Dear Thomas Petazzoni,

Quoted 9 lines

Le Tue, 02 Aug 2011 12:37:41 +0000, Reinhard Meyer <[email protected]> a ?crit :

Quoted 1 line

Configuring for at91sam9m10g45ek board...

For this board there are patches from Alex Waterman, sent on June, 30th. They fix the compilation, and they mostly work (there is an issue with the Ethernet device, though).

Quoted 6 lines
Quoted 5 lines

Since Alex hasn't posted an updated version of his patch set since one month, should I take his patch set, fix the comments you made at that time and send an updated version ?

(I have the AT91SAM9M10G45-EK platform on my desk here).

Unless Atmel NAKs this approach, I am fine with it.

We're OK with this. If Thomas can fix soon, that's good. Or we'll take over and send out the fixes for Soc and board part.

BR,
Eric

Quoted 13 lines

Please re-base them on current u-boot-atmel/master and provide two independent patches:
1. for the SoC parts
2. for the board itself

Thanks,
Reinhard

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#4 lore raw

Le Wed, 03 Aug 2011 10:08:06 +0800,
Hong Xu <[email protected]> a ?crit :

Quoted 4 lines
Quoted 2 lines
Quoted 1 line

(I have the AT91SAM9M10G45-EK platform on my desk here).

Unless Atmel NAKs this approach, I am fine with it.

We're OK with this. If Thomas can fix soon, that's good. Or we'll

I worked on this yesterday evening, U-Boot in NAND flash configuration is working, but the code needs more cleanup. I still need to work on the Dataflash configuration, though.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
author
#5 lore raw

Dear Thomas Petazzoni,

Quoted 11 lines

Le Wed, 03 Aug 2011 10:08:06 +0800,
Hong Xu<[email protected]> a ?crit :

Quoted 4 lines
Quoted 2 lines
Quoted 1 line

(I have the AT91SAM9M10G45-EK platform on my desk here).

Unless Atmel NAKs this approach, I am fine with it.

We're OK with this. If Thomas can fix soon, that's good. Or we'll

I worked on this yesterday evening, U-Boot in NAND flash configuration is working, but the code needs more cleanup. I still need to work on the Dataflash configuration, though.

I'd be happy to take a nandflash version; we can add the dataflash lines to boards.cfg any time later.

Please send a patch first that fixes the SoC files:

at91sam9m10g45_devices.c
at91sam9m10g45.h
at91sam9m10g45_matrix.h

Please make sure they follow the layout of the already fixed files for 9260/9261/9263...

Thank you,
Reinhard

#6 lore raw
In reply to Reinhard Meyer

Hi Reinhard,

the patch for meesc has been posted two times now. Please notice

	http://lists.denx.de/pipermail/u-boot/2011-July/096680.html

and this resend of the mentioned patch:

	http://lists.denx.de/pipermail/u-boot/2011-July/096679.html

I hope this gets meesc back on the green site.

Matthias

Quoted 250 lines · Reinhard Meyer

./MAKEALL at91

--------------------- SUMMARY ---------------------------- Boards compiled: 48
Boards with warnings or errors: 11 ( at91cap9adk meesc meesc_dataflash pm9261 pm9263 at91sam9263ek at91sam9m10g45ek pm9g45 SBC35_A9G20 TNY_A9260 TNY_A9G20 )
----------------------------------------------------------

Verbose output of broken boards:

Configuring for at91cap9adk board... at91cap9_devices.c:33:25: fatal error: asm/arch/io.h: Datei oder Verzeichnis nicht gefunden
compilation terminated.
clock.c:21:3: error: #error You need to define CONFIG_AT91FAMILY in your board config!
timer.c:34:3: error: #error You need to define CONFIG_AT91FAMILY in your board config!
make[1]: *** Keine Regel vorhanden, um das Target ?.depend?,
ben?tigt von ?all?, zu erstellen. Schluss.
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for meesc - Board: meesc, Options:
AT91SAM9263,SYS_USE_NANDFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for meesc_dataflash - Board: meesc, Options:
AT91SAM9263,SYS_USE_DATAFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for pm9261 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9261_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9261_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9261_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for pm9263 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for at91sam9263ek board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

                 from at91sam9263_devices.c:31:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from led.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for at91sam9m10g45ek board... at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9m10g45ek.h:36:0: note: this is the location of the previous definition at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for pm9g45 board... at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9m10g45_devices.c:28:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/pm9g45.h:35:0:
note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for SBC35_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/sbc35_a9g20.h:47:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for TNY_A9260 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Configuring for TNY_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,

from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,

                 from at91sam9260_devices.c:29:

/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Best Regards,
Reinhard

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 16 lines
------------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs
Head of System Design

esd electronic system design gmbh
Vahrenwalder Str. 207 - 30165 Hannover - GERMANY
Phone: +49-511-37298-0 - Fax: +49-511-37298-68
Please visit our homepage http://www.esd.eu
Quality Products - Made in Germany

Besuchen Sie uns auf der Hannover Messe 2011
in Halle 9, Stand D13 vom 04.-08. April 2011 in Hannover!
-------------------------------------------------------------------------
Gesch?ftsf?hrer: Klaus Detering
Amtsgericht Hannover HRB 51373 - VAT-ID DE 115672832
-------------------------------------------------------------------------