Prefer kernel-versioned firmware directory.
PATCH 1/1 Prefer kernel-versioned firmware directory.
From: Eliot Blennerhassett <[email protected]>
Different kernel versions may have different driver versions installed, which in turn require different firmware versions.
If /lib/firmware/$(uname -r) exists, use it in preference to the generic /lib/firmware.
--- configure.in | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
configure.in +3 -1
@@ -33,7 +33,9 @@ AM_CONDITIONAL(BUILD_FW, test "$buildfw" = "yes") AC_MSG_CHECKING(firmware installation directory) # where to put the firmware. If none of these is right, can specify where # --with-hotplug-dir -if test -d /lib/firmware ; then +if test -d /lib/firmware/$(uname -r) ; then + detected_fwdir="/lib/firmware/$(uname -r)" +elif test -d /lib/firmware ; then detected_fwdir="/lib/firmware" elif test -d /lib/hotplug/firmware ; then detected_fwdir="/lib/hotplug/firmware"
Signature · 1 line
1.7.0.4
At Wed, 17 Aug 2011 15:19:23 +1200,
Quoted 8 lines · [email protected] wrote:
From: Eliot Blennerhassett <[email protected]>
Different kernel versions may have different driver versions installed, which in turn require different firmware versions.
If /lib/firmware/$(uname -r) exists, use it in preference to the generic
/lib/firmware.
It's no good idea. The installation of the firmware has nothing to do with the running kernel version. The firmware in kernel-tree may be installed in the kernel-version specific directory, but it's basically not for external firmware.
In principle, if a firmware is compatible, you must rename it, e.g. with a version suffix, etc. Or, if a firmware is backward compatible, we may keep using the same name.
thanks,
Takashi
Quoted 23 lines
Signed-off-by Eliot Blennerhassett <[email protected]>--- configure.in | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)configure.in +3
-1@@ -33,7 +33,9 @@ AM_CONDITIONAL(BUILD_FW, test "$buildfw" = "yes") AC_MSG_CHECKING(firmware installation directory) # where to put the firmware. If none of these is right, can specify where # --with-hotplug-dir -if test -d /lib/firmware ; then +if test -d /lib/firmware/$(uname -r) ; then + detected_fwdir="/lib/firmware/$(uname -r)" +elif test -d /lib/firmware ; then detected_fwdir="/lib/firmware" elif test -d /lib/hotplug/firmware ; then detected_fwdir="/lib/hotplug/firmware"Signature · 1 line
1.7.0.4
Quoted 10 lines · Takashi Iwai
Quoted 7 lines
From: Eliot Blennerhassett <[email protected]>
Different kernel versions may have different driver versions installed, which in turn require different firmware versions.
If /lib/firmware/$(uname -r) exists, use it in preference to the generic
/lib/firmware.It's no good idea. The installation of the firmware has nothing to do with the running kernel version.
But running version of the kernel module may depend on a particular firmware version.
Quoted 3 lines
The firmware in kernel-tree may
be installed in the kernel-version specific directory, but it's basically not for external firmware.
External modules are not renamed, they are put in a kernel-versioned directory, so why not the firmware that they need?
On this ubuntu installation, there is all sorts of firmware in /lib/firmware/$(uname -r) and in /lib/firmare
Some files are duplicated in these locations, some aren't.
The former is searched before the latter when firmware is requested. Now, if the system has installed firmware in a versioned directory, and the someone 'updates' from alsa-firmware, they won't get the expected result because the old firmware will be used in preference to the new.
Quoted 2 lines
In principle, if a firmware is
not?
Quoted 3 lines
compatible, you must rename it, e.g.
with a version suffix, etc. Or, if a firmware is backward compatible, we may keep using the same name.
--
Eliot
Signature · 2 lines
Eliot Blennerhassett AudioScience Inc.
At Fri, 19 Aug 2011 09:57:05 +1200,
Quoted 7 lines · Eliot Blennerhassett
Quoted 5 lines · Takashi Iwai
Quoted 5 lines
From: Eliot Blennerhassett <[email protected]>
Different kernel versions may have different driver versions installed, which in turn require different firmware versions.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
If /lib/firmware/$(uname -r) exists, use it in preference to the generic
/lib/firmware.It's no good idea. The installation of the firmware has nothing to do with the running kernel version.
But running version of the kernel module may depend on a particular firmware version.
Yes, but the files there are installed directly from the kernel tree ($LINUX/firmware/*), not from linux-firmware, alsa-firmware or other external firmware trees. The latter is supposed to be generic to any version, thus installed in /lib/firmware.
Quoted 6 lines
Quoted 3 lines
The firmware in kernel-tree may
be installed in the kernel-version specific directory, but it's basically not for external firmware.External modules are not renamed, they are put in a kernel-versioned directory,
This is a wrong assumption.
Quoted 5 lines
so why not the firmware that they need?
On this ubuntu installation, there is all sorts of firmware in /lib/firmware/$(uname -r) and in
/lib/firmare
Some files are duplicated in these locations, some aren't.
It's because the firmware is included in both trees, kernel and kernel-firmware.
Quoted 1 line
The former is searched before the latter when firmware is requested.
Yes, that's the exact reason -- if a conflict happens with the kernel-tree's and external firmware files, prefer the kernel-tree's.
Quoted 3 lines
Now, if the system has installed firmware in a versioned directory, and the someone 'updates' from alsa-firmware, they won't get the expected result because the old firmware will be used in preference to the new.
In your case, there is no firmware files in the kernel tree, thus there is no such conflict.
thanks,
Takashi
Quoted 17 lines
Quoted 3 lines
In principle, if a firmware is
not?
Quoted 3 lines
compatible, you must rename it, e.g.
with a version suffix, etc. Or, if a firmware is backward compatible, we may keep using the same name.--
EliotSignature · 2 lines
Eliot Blennerhassett AudioScience Inc.