treewide: Correct spelling of successfully
Subsystems (6)
PATCH 1/1 treewide: Correct spelling of successfully
Signed-off-by Joe Perches <[email protected]>
---
Just noticed it doing something else, might as well fix it.
drivers/media/video/cx18/cx18-mailbox.h | 2 +- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/net/igb/e1000_mbx.c | 2 +- drivers/net/igbvf/mbx.c | 2 +- drivers/net/ixgbe/ixgbe_mbx.c | 2 +- drivers/net/ixgbevf/mbx.c | 2 +- drivers/net/phy/broadcom.c | 2 +- drivers/net/tile/tilepro.c | 2 +- drivers/target/iscsi/iscsi_target_nego.c | 2 +- drivers/target/target_core_tpg.c | 2 +- kernel/sched.c | 2 +- sound/core/memalloc.c | 4 ++-- 12 files changed, 13 insertions(+), 13 deletions(-)
drivers/media/video/cx18/cx18-mailbox.h +1 -1
@@ -69,7 +69,7 @@ struct cx18_mailbox {/* Each command can have up to 6 arguments */ u32 args[MAX_MB_ARGUMENTS ];/* The return code can be one of the codes in the file cx23418.h. If the -command is completed successfuly, the error will be ERR_SYS_SUCCESS. +command is completed successfully, the error will be ERR_SYS_SUCCESS. If it is pending, the code is ERR_SYS_PENDING. If it failed, the error code would indicate the task from which the error originated and will be one of the errors in cx23418.h. In that case, the following
drivers/media/video/s5p-fimc/fimc-capture.c +1 -1
@@ -51,7 +51,7 @@ static struct v4l2_subdev *fimc_subdev_register(struct fimc_dev *fimc,return NULL ; } -v4l2_info (&vid_cap->v4l2_dev,"subdevice %s registered successfuly\n" , +v4l2_info (&vid_cap->v4l2_dev,"subdevice %s registered successfully\n" , isp_info->board_info->type);return sd;
drivers/net/igb/e1000_mbx.c +1 -1
@@ -34,7 +34,7 @@* @size: Length of buffer * @mbx_id: id of mailbox to read * -* returns SUCCESS if it successfuly read message from buffer +* returns SUCCESS if it successfully read message from buffer **/ s32 igb_read_mbx (struct e1000_hw *hw,u32 *msg,u16 size,u16 mbx_id) {
drivers/net/igbvf/mbx.c +1 -1
@@ -288,7 +288,7 @@ out_no_write:* @msg: The message buffer * @size: Length of buffer * -* returns SUCCESS if it successfuly read message from buffer +* returns SUCCESS if it successfully read message from buffer **/ static s32 e1000_read_mbx_vf (struct e1000_hw *hw,u32 *msg,u16 size) {
drivers/net/ixgbe/ixgbe_mbx.c +1 -1
@@ -38,7 +38,7 @@* @size: Length of buffer * @mbx_id: id of mailbox to read * -* returns SUCCESS if it successfuly read message from buffer +* returns SUCCESS if it successfully read message from buffer **/ s32 ixgbe_read_mbx (struct ixgbe_hw *hw,u32 *msg,u16 size,u16 mbx_id) {
drivers/net/ixgbevf/mbx.c +1 -1
@@ -276,7 +276,7 @@ out_no_write:* @msg: The message buffer * @size: Length of buffer * -* returns 0 if it successfuly read message from buffer +* returns 0 if it successfully read message from buffer **/ static s32 ixgbevf_read_mbx_vf (struct ixgbe_hw *hw,u32 *msg,u16 size) {
drivers/net/phy/broadcom.c +1 -1
@@ -553,7 +553,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)/* * There is no BCM5481 specification available, so down * here is everything we know about "register 0x18". This -* at least helps BCM5481 to successfuly receive packets +* at least helps BCM5481 to successfully receive packets * on MPC8360E-RDK board. Peter Barada <[email protected]> * says: "This sets delay between the RXD and RXC signals * instead of using trace lengths to achieve timing".
drivers/net/tile/tilepro.c +1 -1
@@ -177,7 +177,7 @@ struct tile_net_cpu {struct tile_net_stats_t stats;/* True iff NAPI is enabled. */ bool napi_enabled; -/* True if this tile has succcessfully registered with the IPP. */ +/* True if this tile has successfully registered with the IPP. */ bool registered;/* True if the link was down last time we tried to register. */ bool link_down;
drivers/target/iscsi/iscsi_target_nego.c +1 -1
@@ -504,7 +504,7 @@ static int iscsi_target_do_authentication(break ;case 1 :pr_debug ("iSCSI security negotiation" -" completed sucessfully.\n" ); +" completed successfully.\n" ); login->auth_complete =1 ;if ((login_req->flags &ISCSI_FLAG_LOGIN_NEXT_STAGE1 ) && (login_req->flags &ISCSI_FLAG_LOGIN_TRANSIT )) {
drivers/target/target_core_tpg.c +1 -1
@@ -585,7 +585,7 @@ int core_tpg_set_initiator_node_queue_depth(if (init_sess) tpg->se_tpg_tfo->close_session (init_sess); -pr_debug ("Successfuly changed queue depth to: %d for Initiator" +pr_debug ("Successfully changed queue depth to: %d for Initiator" " Node: %s on %s Target Portal Group: %u\n" , queue_depth, initiatorname, tpg->se_tpg_tfo->get_fabric_name (), tpg->se_tpg_tfo->tpg_get_tag (tpg));
kernel/sched.c +1 -1
@@ -1739,7 +1739,7 @@ static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)#ifdef CONFIG_SMP /* * After ->cpu is set up to a new value, task_rq_lock(p, ...) can be -* successfuly executed on another CPU. We must ensure that updates of +* successfully executed on another CPU. We must ensure that updates of * per-task data have been completed by this moment. */ smp_wmb ();
sound/core/memalloc.c +2 -2
@@ -176,7 +176,7 @@ static void snd_free_dev_pages(struct device *dev, size_t size, void *ptr,* Calls the memory-allocator function for the corresponding * buffer type. * -* Returns zero if the buffer with the given size is allocated successfuly, +* Returns zero if the buffer with the given size is allocated successfully, * other a negative value at error. */ int snd_dma_alloc_pages(int type, struct device *device, size_t size,
@@ -230,7 +230,7 @@ int snd_dma_alloc_pages(int type, struct device *device, size_t size,* tries to allocate again. The size actually allocated is stored in * res_size argument. * -* Returns zero if the buffer with the given size is allocated successfuly, +* Returns zero if the buffer with the given size is allocated successfully, * other a negative value at error. */ int snd_dma_alloc_pages_fallback(int type, struct device *device, size_t size,
Jiri Kosina
AppliedQuoted 4 lines · Joe Perches
Signed-off-by Joe Perches <[email protected]>---
Just noticed it doing something else, might as well fix it.
Applied.
Signature · 2 lines
Jiri Kosina SUSE Labs