Skip to contentSkip to conversation

ASoC: Support a wider range of sample rates on Speyside WM8962

PATCH New Mark Brown 1 participant 1 message Sep 23, 2011

Subsystems (3)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 ASoC: Support a wider range of sample rates on Speyside WM8962

As we've only got one audio interface and it is symmetric we can just set SYSCLK based on the sample rate requested by the application layer. Provide a default so bypass paths work before audio playback.

---
 sound/soc/samsung/speyside_wm8962.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)
sound/soc/samsung/speyside_wm8962.c +6 -2
index 3820a6b..98b28ea 100644
@@ -16,6 +16,8 @@
 
 #include "../codecs/wm8962.h"
 
+static int sample_rate = 44100;
+
 static int speyside_wm8962_set_bias_level(struct snd_soc_card *card,
 					  struct snd_soc_dapm_context *dapm,
 					  enum snd_soc_bias_level level)
@@ -31,13 +33,13 @@ static int speyside_wm8962_set_bias_level(struct snd_soc_card *card,
 		if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
 			ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
 						  WM8962_FLL_MCLK, 32768,
-						  44100 * 512);
+						  sample_rate * 512);
 			if (ret < 0)
 				pr_err("Failed to start FLL: %d\n", ret);
 
 			ret = snd_soc_dai_set_sysclk(codec_dai,
 						     WM8962_SYSCLK_FLL,
-						     44100 * 512,
+						     sample_rate * 512,
 						     SND_SOC_CLOCK_IN);
 			if (ret < 0) {
 				pr_err("Failed to set SYSCLK: %d\n", ret);
@@ -109,6 +111,8 @@ static int speyside_wm8962_hw_params(struct snd_pcm_substream *substream,
 	if (ret < 0)
 		return ret;
 
+	sample_rate = params_rate(params);
+
 	return 0;
 }
 
Signature · 1 line
1.7.6.3