ADT installer
I was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Jim A
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installer
I was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi Jim,
I just did build adt-installer tar ball and it was created under ../build/tmp/deploy/sdk directory as adt_installer.tar.bz2. The following is the steps that what I did:
1. go under your poky directory, for my case is /home/jzhang/poky-master
2. source oe-init-build-env
3. bitbake adt-installer
4. under /home/jzhang/poky-master/build/tmp/deploy/sdk, adt_installer.tar.bz2 is created
So are these steps the same as what you did?
Thanks,
Jessica
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Rifenbark, Scott M
Sent: Wednesday, November 23, 2011 8:56 AM
To: Jim Abernathy; [email protected]
Subject: Re: [yocto] ADT installer
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installer
I was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 19 lines · Scott M
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installerI was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Quoted 7 lines
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
The instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
Jim A
I am running it right now (slow machine) and followed the instructions in the manual. So far, it is building. The only problem I encountered is that the wget command uses a bad URL. I have changed that to the following:
wget http://downloads.yoctoproject.org/releases/yocto/yocto-1.1/poky-edison-6.0.tar.bz2
The instructions purposely don't 'cd' into the directory where oe-init-build-env resides.
My machine is still cranking away....
Scott
-----Original Message-----
From: James Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 9:28 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: Re: [yocto] ADT installer
Quoted 19 lines · Scott M
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installerI was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Quoted 7 lines
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
The instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
Jim A
Jim,
My machine finished and it built the adt_installer.tar.bz2 in ~/yocto-project/build/tmp/deploy/sdk as advertised.
The only change I made was the URL change to get the Edison tarball using wget.
Scott
-----Original Message-----
From: James Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 9:28 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: Re: [yocto] ADT installer
Quoted 19 lines · Scott M
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installerI was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Quoted 7 lines
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
The instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
Jim A
Quoted 8 lines · Scott M
Jim,
My machine finished and it built the adt_installer.tar.bz2 in ~/yocto-project/build/tmp/deploy/sdk as advertised.
The only change I made was the URL change to get the Edison tarball using wget.
Scott
Okay, I'll go back to a fresh install. I just use the Poky-edison I had used for a previous bitbake for a boot image.
Jim A
Quoted 40 lines
-----Original Message-----
From: James Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 9:28 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: Re: [yocto] ADT installerQuoted 19 lines · Scott M
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installerI was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Quoted 7 lines
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoThe instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
Jim A
If you want to see the latest ADT manual with the correct URL for the Edison tarball, go to http://www.yoctoproject.org/documentation and click on the "Docs in Progress" on the right. That takes you to the manual I just updated, http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html.
Scott
-----Original Message-----
From: Jim Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 11:03 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: RE: [yocto] ADT installer
Quoted 8 lines · Scott M
Jim,
My machine finished and it built the adt_installer.tar.bz2 in ~/yocto-project/build/tmp/deploy/sdk as advertised.
The only change I made was the URL change to get the Edison tarball using wget.
Scott
Okay, I'll go back to a fresh install. I just use the Poky-edison I had used for a previous bitbake for a boot image.
Jim A
Quoted 40 lines
-----Original Message-----
From: James Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 9:28 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: Re: [yocto] ADT installerQuoted 19 lines · Scott M
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installerI was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Quoted 7 lines
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoThe instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
Jim A
Quoted 8 lines · Scott M
Jim,
My machine finished and it built the adt_installer.tar.bz2 in ~/yocto-project/build/tmp/deploy/sdk as advertised.
The only change I made was the URL change to get the Edison tarball using wget.
Scott
Okay, I see my problem. If you look at the instructions in the manual,
$ source poky-edison-6.0/oe-init-build-env
$ bitbake adt-installerit does not start with cd'ing into the poky directory as other bitbake sessions do. This sequence creates the build directory at the same directory level as the poky-edison-6.0 directory. I was looking down in poky-edison-6.0. What happened is the build directory was created at the correct level for the way the command was spelled out. I just had my head up my ....
Jim A
Quoted 40 lines
-----Original Message-----
From: James Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 9:28 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: Re: [yocto] ADT installerQuoted 19 lines · Scott M
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installerI was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Quoted 7 lines
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoThe instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
Jim A
Jim,
Glad you got it working. Your efforts did help me find an old URL that I replaced.
Thanks,
Scott
-----Original Message-----
From: Jim Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 11:11 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: RE: [yocto] ADT installer
Quoted 8 lines · Scott M
Jim,
My machine finished and it built the adt_installer.tar.bz2 in ~/yocto-project/build/tmp/deploy/sdk as advertised.
The only change I made was the URL change to get the Edison tarball using wget.
Scott
Okay, I see my problem. If you look at the instructions in the manual,
$ source poky-edison-6.0/oe-init-build-env
$ bitbake adt-installerit does not start with cd'ing into the poky directory as other bitbake sessions do. This sequence creates the build directory at the same directory level as the poky-edison-6.0 directory. I was looking down in poky-edison-6.0. What happened is the build directory was created at the correct level for the way the command was spelled out. I just had my head up my ....
Jim A
Quoted 40 lines
-----Original Message-----
From: James Abernathy [mailto:[email protected]]
Sent: Wednesday, November 23, 2011 9:28 AM
To: Rifenbark, Scott M
Cc: [email protected]
Subject: Re: [yocto] ADT installerQuoted 19 lines · Scott M
Jim,
Let me try and replicate this from the manual. I will get back momentarily.
Scott
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jim Abernathy
Sent: Wednesday, November 23, 2011 8:45 AM
To: [email protected]
Subject: [yocto] ADT installerI was following the ADT manual online, section 2.1.1.1, and everything seemed to complete as expected, but adt_installer.tar.bz2 was not created in the ..../build/tmp/deploy/sdk direction as documented. In fact, there is no sdk directory in deploy. Is this a documentation issue or is this not working. BTW, I could not find the tarball anywhere on my Ubuntu development system.
Quoted 7 lines
Jim A
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoThe instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
Jim A