ASoC: Add signal generator widget type
Subsystems (3)
PATCH 1/3 ASoC: Add signal generator widget type
A signal generator behaves as an input would but is not considered for any of the special behaviour associated with external input pins. This is especially useful when automatically working out not connected widgets.
--- include/sound/soc-dapm.h | 4 ++++ sound/soc/soc-dapm.c | 7 +++++++ 2 files changed, 11 insertions(+), 0 deletions(-)
include/sound/soc-dapm.h +4 -0
@@ -43,6 +43,9 @@ .num_kcontrols = 0}/* platform domain */ +#define SND_SOC_DAPM_SIGGEN (wname) \ +{ .id = snd_soc_dapm_siggen, .name = wname, .kcontrol_news = NULL, \ + .num_kcontrols = 0, .reg = SND_SOC_NOPM }#define SND_SOC_DAPM_INPUT (wname) \ { .id = snd_soc_dapm_input, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM }
@@ -410,6 +413,7 @@ enum snd_soc_dapm_type { snd_soc_dapm_supply,/* power/clock supply */ snd_soc_dapm_aif_in,/* audio interface input */ snd_soc_dapm_aif_out,/* audio interface output */ + snd_soc_dapm_siggen, /* signal generator */ };/*
sound/soc/soc-dapm.c +7 -0
@@ -339,6 +339,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w,case snd_soc_dapm_output:case snd_soc_dapm_adc:case snd_soc_dapm_input: +case snd_soc_dapm_siggen:case snd_soc_dapm_dac:case snd_soc_dapm_micbias:case snd_soc_dapm_vmid:
@@ -772,6 +773,11 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget)return widget->inputs; } +/* signal generator */ +if (widget->id == snd_soc_dapm_siggen) { + widget->inputs =snd_soc_dapm_suspend_check (widget); +return widget->inputs; + } }list_for_each_entry (path, &widget->sources, list_sink) {
@@ -1982,6 +1988,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm,case snd_soc_dapm_out_drv:case snd_soc_dapm_input:case snd_soc_dapm_output: +case snd_soc_dapm_siggen:case snd_soc_dapm_micbias:case snd_soc_dapm_vmid:case snd_soc_dapm_pre:
Signature · 1 line
1.7.7.3
PATCH 2/3 ASoC: Make WM5100 tone generator widgets signal generators
--- sound/soc/codecs/wm5100.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
sound/soc/codecs/wm5100.c +1 -1
@@ -952,7 +952,7 @@ SND_SOC_DAPM_INPUT("IN3L"),SND_SOC_DAPM_INPUT ("IN3R" ),SND_SOC_DAPM_INPUT ("IN4L" ),SND_SOC_DAPM_INPUT ("IN4R" ), -SND_SOC_DAPM_INPUT ("TONE" ), +SND_SOC_DAPM_SIGGEN ("TONE" ),SND_SOC_DAPM_PGA_E ("IN1L PGA" ,WM5100_INPUT_ENABLES ,WM5100_IN1L_ENA_SHIFT ,0 , NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
Signature · 1 line
1.7.7.3
PATCH 3/3 ASoC: Make WM8962 beep a signal generator
In reply to Mark Brown--- sound/soc/codecs/wm8962.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
sound/soc/codecs/wm8962.c +1 -1
@@ -2675,7 +2675,7 @@ SND_SOC_DAPM_INPUT("IN3L"),SND_SOC_DAPM_INPUT ("IN3R" ),SND_SOC_DAPM_INPUT ("IN4L" ),SND_SOC_DAPM_INPUT ("IN4R" ), -SND_SOC_DAPM_INPUT ("Beep" ), +SND_SOC_DAPM_SIGGEN ("Beep" ),SND_SOC_DAPM_INPUT ("DMICDAT" ), SND_SOC_DAPM_SUPPLY("MICBIAS", WM8962_PWR_MGMT_1, 1, 0, NULL, 0),
Signature · 1 line
1.7.7.3
Quoted 4 lines · Mark Brown
A signal generator behaves as an input would but is not considered for any of the special behaviour associated with external input pins. This is especially useful when automatically working out not connected widgets.
Would this not be an output type ?
Regards
Liam
Quoted 6 lines · Liam Girdwood
Quoted 3 lines · Mark Brown
A signal generator behaves as an input would but is not considered for any of the special behaviour associated with external input pins. This is especially useful when automatically working out not connected widgets.
Would this not be an output type ?
It's a signal source - in terms of the DAPM graph and figuring out a route from an input to an output it's an input.
Quoted 10 lines · Mark Brown
Quoted 6 lines · Liam Girdwood
Quoted 3 lines · Mark Brown
A signal generator behaves as an input would but is not considered for any of the special behaviour associated with external input pins. This is especially useful when automatically working out not connected widgets.
Would this not be an output type ?
It's a signal source - in terms of the DAPM graph and figuring out a route from an input to an output it's an input.
Ah, OK - I'm thinking here of an internal signal generator (i.e. coming from within platform/codec). e.g. we could add a simple sine wave generator to OMAP4 ABE for test/debug purposes.
Regards
Liam
Quoted 8 lines · Liam Girdwood
Quoted 2 lines · Mark Brown
It's a signal source - in terms of the DAPM graph and figuring out a route from an input to an output it's an input.
Ah, OK - I'm thinking here of an internal signal generator (i.e. coming from within platform/codec). e.g. we could add a simple sine wave generator to OMAP4 ABE for test/debug purposes.
Yeah, that's exactly the sort of thing that this is for in the first instance (though in the WM8962 case it's a bit more fully featured than that). If they are output widgets DAPM looks for something to input data to them, can't find one and does the wrong thing.