Skip to contentSkip to conversation

gpio: Explicitly index samsung_gpio_cfgs

PATCH New Mark Brown 1 participant 4 messages Dec 21, 2011

Subsystems (5)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/4 gpio: Explicitly index samsung_gpio_cfgs

Make it easier to follow the by number references into samsung_gpio_cfgs by putting the indexes into the code initialising the array, improving readability a bit. Ideally we wouldn't be using magic array indexes at all but this is easier than coming up with a better way.

---
 drivers/gpio/gpio-samsung.c |   29 +++++++++++++++++++----------
 1 files changed, 19 insertions(+), 10 deletions(-)
drivers/gpio/gpio-samsung.c +19 -10
index 6b4d23f..f1c1ecd 100644
@@ -470,33 +470,42 @@ static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
 #endif
 
 static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
-	{
+	[0] = {
 		.cfg_eint	= 0x0,
-	}, {
+	},
+	[1] = {
 		.cfg_eint	= 0x3,
-	}, {
+	},
+	[2] = {
 		.cfg_eint	= 0x7,
-	}, {
+	},
+	[3] = {
 		.cfg_eint	= 0xF,
-	}, {
+	},
+	[4] = {
 		.cfg_eint	= 0x0,
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[5] = {
 		.cfg_eint	= 0x2,
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[6] = {
 		.cfg_eint	= 0x3,
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[7] = {
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[8] = {
 		.set_pull	= exynos4_gpio_setpull,
 		.get_pull	= exynos4_gpio_getpull,
-	}, {
+	},
+	[9] = {
 		.cfg_eint	= 0x3,
 		.set_pull	= exynos4_gpio_setpull,
 		.get_pull	= exynos4_gpio_getpull,
Signature · 1 line
1.7.7.3
author
#1 lore raw

PATCH 2/4 gpio: Fix typo in comment in Samsung driver

---
 drivers/gpio/gpio-samsung.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/gpio/gpio-samsung.c +1 -1
index f1c1ecd..f44c020 100644
@@ -233,7 +233,7 @@ static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  *
- * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
  * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
  * S3C_GPIO_SPECIAL() macro.
  */
Signature · 1 line
1.7.7.3
author
#2 lore raw

PATCH 3/4 gpio: Convert GPIO drivers to module_platform_driver

In reply to Mark Brown

Where appropriate factor out some boilerplate code for platform device registration into module_platform_driver. Drivers that don't use the standard module_init initcall haven't been converted.

---
 drivers/gpio/gpio-adp5520.c    |   12 +-----------
 drivers/gpio/gpio-cs5535.c     |   13 +------------
 drivers/gpio/gpio-da9052.c     |   12 +-----------
 drivers/gpio/gpio-generic.c    |   12 +-----------
 drivers/gpio/gpio-janz-ttl.c   |   13 +------------
 drivers/gpio/gpio-rdc321x.c    |   13 +------------
 drivers/gpio/gpio-sch.c        |   13 +------------
 drivers/gpio/gpio-timberdale.c |   13 +------------
 drivers/gpio/gpio-ucb1400.c    |   13 +------------
 drivers/gpio/gpio-vr41xx.c     |   13 +------------
 drivers/gpio/gpio-vx855.c      |   12 +-----------
 11 files changed, 11 insertions(+), 128 deletions(-)
drivers/gpio/gpio-adp5520.c +1 -11
index 9f27815..2f263cc 100644
@@ -193,17 +193,7 @@ static struct platform_driver adp5520_gpio_driver = {
 	.remove		= __devexit_p(adp5520_gpio_remove),
 };
 
-static int __init adp5520_gpio_init(void)
-{
-	return platform_driver_register(&adp5520_gpio_driver);
-}
-module_init(adp5520_gpio_init);
-
-static void __exit adp5520_gpio_exit(void)
-{
-	platform_driver_unregister(&adp5520_gpio_driver);
-}
-module_exit(adp5520_gpio_exit);
+module_platform_driver(adp5520_gpio_driver);
 
 MODULE_AUTHOR("Michael Hennerich <[email protected]>");
 MODULE_DESCRIPTION("GPIO ADP5520 Driver");
drivers/gpio/gpio-cs5535.c +1 -12
index 693a81b..19eda1b 100644
@@ -381,18 +381,7 @@ static struct platform_driver cs5535_gpio_driver = {
 	.remove = __devexit_p(cs5535_gpio_remove),
 };
 
-static int __init cs5535_gpio_init(void)
-{
-	return platform_driver_register(&cs5535_gpio_driver);
-}
-
-static void __exit cs5535_gpio_exit(void)
-{
-	platform_driver_unregister(&cs5535_gpio_driver);
-}
-
-module_init(cs5535_gpio_init);
-module_exit(cs5535_gpio_exit);
+module_platform_driver(cs5535_gpio_driver);
 
 MODULE_AUTHOR("Andres Salomon <[email protected]>");
 MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
drivers/gpio/gpio-da9052.c +1 -11
index f8ce29e..56dd047 100644
@@ -254,17 +254,7 @@ static struct platform_driver da9052_gpio_driver = {
 	},
 };
 
-static int __init da9052_gpio_init(void)
-{
-	return platform_driver_register(&da9052_gpio_driver);
-}
-module_init(da9052_gpio_init);
-
-static void __exit da9052_gpio_exit(void)
-{
-	return platform_driver_unregister(&da9052_gpio_driver);
-}
-module_exit(da9052_gpio_exit);
+module_platform_driver(da9052_gpio_driver);
 
 MODULE_AUTHOR("David Dajun Chen <[email protected]>");
 MODULE_DESCRIPTION("DA9052 GPIO Device Driver");
drivers/gpio/gpio-generic.c +1 -11
index 4e24436..e38dd0c 100644
@@ -524,17 +524,7 @@ static struct platform_driver bgpio_driver = {
 	.remove = __devexit_p(bgpio_pdev_remove),
 };
 
-static int __init bgpio_platform_init(void)
-{
-	return platform_driver_register(&bgpio_driver);
-}
-module_init(bgpio_platform_init);
-
-static void __exit bgpio_platform_exit(void)
-{
-	platform_driver_unregister(&bgpio_driver);
-}
-module_exit(bgpio_platform_exit);
+module_platform_driver(bgpio_driver);
 
 #endif /* CONFIG_GPIO_GENERIC_PLATFORM */
 
drivers/gpio/gpio-janz-ttl.c +1 -12
index 6f7fda0..f2f000d 100644
@@ -237,20 +237,9 @@ static struct platform_driver ttl_driver = {
 	.remove		= __devexit_p(ttl_remove),
 };
 
-static int __init ttl_init(void)
-{
-	return platform_driver_register(&ttl_driver);
-}
-
-static void __exit ttl_exit(void)
-{
-	platform_driver_unregister(&ttl_driver);
-}
+module_platform_driver(ttl_driver);
 
 MODULE_AUTHOR("Ira W. Snyder <[email protected]>");
 MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:janz-ttl");
-
-module_init(ttl_init);
-module_exit(ttl_exit);
drivers/gpio/gpio-rdc321x.c +1 -12
index 2762698..e97016a 100644
@@ -227,18 +227,7 @@ static struct platform_driver rdc321x_gpio_driver = {
 	.remove		= __devexit_p(rdc321x_gpio_remove),
 };
 
-static int __init rdc321x_gpio_init(void)
-{
-	return platform_driver_register(&rdc321x_gpio_driver);
-}
-
-static void __exit rdc321x_gpio_exit(void)
-{
-	platform_driver_unregister(&rdc321x_gpio_driver);
-}
-
-module_init(rdc321x_gpio_init);
-module_exit(rdc321x_gpio_exit);
+module_platform_driver(rdc321x_gpio_driver);
 
 MODULE_AUTHOR("Florian Fainelli <[email protected]>");
 MODULE_DESCRIPTION("RDC321x GPIO driver");
drivers/gpio/gpio-sch.c +1 -12
index 1635158..8cadf4d 100644
@@ -297,18 +297,7 @@ static struct platform_driver sch_gpio_driver = {
 	.remove		= __devexit_p(sch_gpio_remove),
 };
 
-static int __init sch_gpio_init(void)
-{
-	return platform_driver_register(&sch_gpio_driver);
-}
-
-static void __exit sch_gpio_exit(void)
-{
-	platform_driver_unregister(&sch_gpio_driver);
-}
-
-module_init(sch_gpio_init);
-module_exit(sch_gpio_exit);
+module_platform_driver(sch_gpio_driver);
 
 MODULE_AUTHOR("Denis Turischev <[email protected]>");
 MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
drivers/gpio/gpio-timberdale.c +1 -12
index c593bd4..031c6ad 100644
@@ -359,18 +359,7 @@ static struct platform_driver timbgpio_platform_driver = {
 
 /*--------------------------------------------------------------------------*/
 
-static int __init timbgpio_init(void)
-{
-	return platform_driver_register(&timbgpio_platform_driver);
-}
-
-static void __exit timbgpio_exit(void)
-{
-	platform_driver_unregister(&timbgpio_platform_driver);
-}
-
-module_init(timbgpio_init);
-module_exit(timbgpio_exit);
+module_platform_driver(timbgpio_platform_driver);
 
 MODULE_DESCRIPTION("Timberdale GPIO driver");
 MODULE_LICENSE("GPL v2");
drivers/gpio/gpio-ucb1400.c +1 -12
index 50e6bd1..26405ef 100644
@@ -103,23 +103,12 @@ static struct platform_driver ucb1400_gpio_driver = {
 	},
 };
 
-static int __init ucb1400_gpio_init(void)
-{
-	return platform_driver_register(&ucb1400_gpio_driver);
-}
-
-static void __exit ucb1400_gpio_exit(void)
-{
-	platform_driver_unregister(&ucb1400_gpio_driver);
-}
-
 void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
 {
 	ucbdata = data;
 }
 
-module_init(ucb1400_gpio_init);
-module_exit(ucb1400_gpio_exit);
+module_platform_driver(ucb1400_gpio_driver);
 
 MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
 MODULE_LICENSE("GPL");
drivers/gpio/gpio-vr41xx.c +1 -12
index 98723cb..82d5c20 100644
@@ -571,15 +571,4 @@ static struct platform_driver giu_device_driver = {
 	},
 };
 
-static int __init vr41xx_giu_init(void)
-{
-	return platform_driver_register(&giu_device_driver);
-}
-
-static void __exit vr41xx_giu_exit(void)
-{
-	platform_driver_unregister(&giu_device_driver);
-}
-
-module_init(vr41xx_giu_init);
-module_exit(vr41xx_giu_exit);
+module_platform_driver(giu_device_driver);
drivers/gpio/gpio-vx855.c +1 -11
index ef5aabd..76ebfe5 100644
@@ -315,17 +315,7 @@ static struct platform_driver vx855gpio_driver = {
 	.remove		= __devexit_p(vx855gpio_remove),
 };
 
-static int vx855gpio_init(void)
-{
-	return platform_driver_register(&vx855gpio_driver);
-}
-module_init(vx855gpio_init);
-
-static void vx855gpio_exit(void)
-{
-	platform_driver_unregister(&vx855gpio_driver);
-}
-module_exit(vx855gpio_exit);
+module_platform_driver(vx855gpio_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Harald Welte <[email protected]>");
Signature · 1 line
1.7.7.3
author
#3 lore raw

PATCH 4/4 gpio: Add decode of WM8994 GPIO configuration

In reply to Mark Brown

For the human reader.

---
 drivers/gpio/gpio-wm8994.c |   79 ++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 77 insertions(+), 2 deletions(-)
drivers/gpio/gpio-wm8994.c +77 -2
index 96198f3..92ea535 100644
@@ -117,6 +117,60 @@ static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 
 
 #ifdef CONFIG_DEBUG_FS
+static const char *wm8994_gpio_fn(u16 fn)
+{
+	switch (fn) {
+	case WM8994_GP_FN_PIN_SPECIFIC:
+		return "pin-specific";
+	case WM8994_GP_FN_GPIO:
+		return "GPIO";
+	case WM8994_GP_FN_SDOUT:
+		return "SDOUT";
+	case WM8994_GP_FN_IRQ:
+		return "IRQ";
+	case WM8994_GP_FN_TEMPERATURE:
+		return "Temperature";
+	case WM8994_GP_FN_MICBIAS1_DET:
+		return "MICBIAS1 detect";
+	case WM8994_GP_FN_MICBIAS1_SHORT:
+		return "MICBIAS1 short";
+	case WM8994_GP_FN_MICBIAS2_DET:
+		return "MICBIAS2 detect";
+	case WM8994_GP_FN_MICBIAS2_SHORT:
+		return "MICBIAS2 short";
+	case WM8994_GP_FN_FLL1_LOCK:
+		return "FLL1 lock";
+	case WM8994_GP_FN_FLL2_LOCK:
+		return "FLL2 lock";
+	case WM8994_GP_FN_SRC1_LOCK:
+		return "SRC1 lock";
+	case WM8994_GP_FN_SRC2_LOCK:
+		return "SRC2 lock";
+	case WM8994_GP_FN_DRC1_ACT:
+		return "DRC1 activity";
+	case WM8994_GP_FN_DRC2_ACT:
+		return "DRC2 activity";
+	case WM8994_GP_FN_DRC3_ACT:
+		return "DRC3 activity";
+	case WM8994_GP_FN_WSEQ_STATUS:
+		return "Write sequencer";
+	case WM8994_GP_FN_FIFO_ERROR:
+		return "FIFO error";
+	case WM8994_GP_FN_OPCLK:
+		return "OPCLK";
+	case WM8994_GP_FN_THW:
+		return "Thermal warning";
+	case WM8994_GP_FN_DCS_DONE:
+		return "DC servo";
+	case WM8994_GP_FN_FLL1_OUT:
+		return "FLL1 output";
+	case WM8994_GP_FN_FLL2_OUT:
+		return "FLL1 output";
+	default:
+		return "Unknown";
+	}
+}
+
 static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
@@ -148,8 +202,29 @@ static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 			continue;
 		}
 
-		/* No decode yet; note that GPIO2 is special */
-		seq_printf(s, "(%x)\n", reg);
+		if (reg & WM8994_GPN_DIR)
+			seq_printf(s, "in ");
+		else
+			seq_printf(s, "out ");
+
+		if (reg & WM8994_GPN_PU)
+			seq_printf(s, "pull up ");
+
+		if (reg & WM8994_GPN_PD)
+			seq_printf(s, "pull down ");
+
+		if (reg & WM8994_GPN_POL)
+			seq_printf(s, "inverted ");
+		else
+			seq_printf(s, "noninverted ");
+
+		if (reg & WM8994_GPN_OP_CFG)
+			seq_printf(s, "open drain ");
+		else
+			seq_printf(s, "CMOS ");
+
+		seq_printf(s, "%s (%x)\n",
+			   wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg);
 	}
 }
 #else
Signature · 1 line
1.7.7.3