snd-usb endpoint rework, version 6
cover snd-usb endpoint rework, version 6
Fortunately, the effects reported by Aurélien were easy to fix, and indeed just regressions from previous version of the patch set. Those are now out of the way, so here's version 6.
One thing that has also been added here is a sixth patch that adds some documentation to endpoint.c to explain the concept of the new implementation.
Thanks, and please have more test results coming.
Daniel
Daniel Mack (6):
ALSA: snd-usb: add snd_usb_audio-wide mutex
ALSA: snd-usb: implement new endpoint streaming model
ALSA: snd-usb: switch over to new endpoint streaming logic
ALSA: snd-usb: remove old streaming logic
ALSA: snd-usb: add support for implicit feedback
ALSA: snd-usb: add some documentation
sound/usb/card.c | 10 +- sound/usb/card.h | 62 ++ sound/usb/endpoint.c | 1602 ++++++++++++++++++++++++++++---------------------- sound/usb/endpoint.h | 32 +- sound/usb/pcm.c | 440 ++++++++++++--- sound/usb/stream.c | 31 +- sound/usb/usbaudio.h | 2 + 7 files changed, 1381 insertions(+), 798 deletions(-)
Signature · 6 lines
1.7.7.4 _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH 1/6 ALSA: snd-usb: add snd_usb_audio-wide mutex
This is needed for new card-wide list operations.
--- sound/usb/card.c | 2 ++ sound/usb/usbaudio.h | 1 + 2 files changed, 3 insertions(+), 0 deletions(-)
sound/usb/card.c +2 -0
@@ -276,6 +276,7 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)static int snd_usb_audio_free (struct snd_usb_audio *chip) { +mutex_destroy (&chip->mutex);kfree (chip);return 0 ; }
@@ -336,6 +337,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx,return -ENOMEM ; } +mutex_init (&chip->mutex);mutex_init (&chip->shutdown_mutex); chip->index = idx; chip->dev = dev;
sound/usb/usbaudio.h +1 -0
@@ -36,6 +36,7 @@ struct snd_usb_audio {struct snd_card *card;struct usb_interface *pm_intf;u32 usb_id; +struct mutex mutex;struct mutex shutdown_mutex; unsigned int shutdown:1; unsigned int probing:1;
Signature · 1 line
1.7.7.4
PATCH 2/6 ALSA: snd-usb: implement new endpoint streaming model
In reply to Daniel MackThis patch adds a new generic streaming logic for audio over USB.
It defines a model (snd_usb_endpoint) that handles everything that is related to an USB endpoint and its streaming. There are functions to activate and deactivate an endpoint (which call usb_set_interface()), and to start and stop its URBs. It also has function pointers to be called when data was received or is about to be sent, and pointer to a sync slave (another snd_usb_endpoint) that is informed when data has been received.
A snd_usb_endpoint knows about its state and implements a refcounting, so only the first user will actually start the URBs and only the last one to stop it will tear them down again.
With this sort of abstraction, the actual streaming is decoupled from the pcm handling, which makes the "implicit feedback" mechanisms easy to implement.
In order to split changes properly, this patch only adds the new implementation but leaves the old one around, so the the driver doesn't change its behaviour. The switch to actually use the new code is submitted separately.
--- sound/usb/card.h | 58 ++++ sound/usb/endpoint.c | 927 +++++++++++++++++++++++++++++++++++++++++++++++++- sound/usb/endpoint.h | 26 ++ sound/usb/usbaudio.h | 1 + 4 files changed, 1001 insertions(+), 11 deletions(-)
sound/usb/card.h +58 -0
@@ -29,13 +29,17 @@ struct audioformat { };struct snd_usb_substream ; +struct snd_usb_endpoint ;struct snd_urb_ctx {struct urb *urb;unsigned int buffer_size;/* size of data buffer, if data URB */ struct snd_usb_substream *subs; +struct snd_usb_endpoint *ep;int index;/* index for urb array */ int packets;/* number of packets per urb */ +int packet_size[MAX_PACKS_HS ];/* size of packets for next submission */ +struct list_head ready_list; };struct snd_urb_ops {
@@ -45,6 +49,60 @@ struct snd_urb_ops {int (*retire_sync)(struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime,struct urb *u); }; +struct snd_usb_endpoint { +struct snd_usb_audio *chip; + +int use_count; +int ep_num;/* the referenced endpoint number */ +int type;/* SND_USB_ENDPOINT_TYPE_* */ +unsigned long flags; + +void (*prepare_data_urb) (struct snd_usb_substream *subs, +struct urb *urb); +void (*retire_data_urb) (struct snd_usb_substream *subs, +struct urb *urb); + +struct snd_usb_substream *data_subs; +struct snd_usb_endpoint *sync_master; +struct snd_usb_endpoint *sync_slave; + +struct snd_urb_ctx urb[MAX_URBS ]; + +struct snd_usb_packet_info { +uint32_t packet_size[MAX_PACKS_HS ]; +int packets; + } next_packet[MAX_URBS ]; +int next_packet_read_pos, next_packet_write_pos; +struct list_head ready_playback_urbs; + +unsigned int nurbs;/* # urbs */ +unsigned long active_mask;/* bitmask of active urbs */ +unsigned long unlink_mask;/* bitmask of unlinked urbs */ +char *syncbuf;/* sync buffer for all sync URBs */ +dma_addr_t sync_dma;/* DMA address of syncbuf */ + +unsigned int pipe;/* the data i/o pipe */ +unsigned int freqn;/* nominal sampling rate in fs/fps in Q16.16 format */ +unsigned int freqm;/* momentary sampling rate in fs/fps in Q16.16 format */ +int freqshift;/* how much to shift the feedback value to get Q16.16 */ +unsigned int freqmax;/* maximum sampling rate, used for buffer management */ +unsigned int phase;/* phase accumulator */ +unsigned int maxpacksize;/* max packet size in bytes */ +unsigned int maxframesize;/* max packet size in frames */ +unsigned int curpacksize;/* current packet size in bytes (for capture) */ +unsigned int curframesize;/* current packet size in frames (for capture) */ +unsigned int syncmaxsize;/* sync endpoint packet size */ +unsigned int fill_max:1 ;/* fill max packet size always */ +unsigned int datainterval;/* log_2 of data packet interval */ +unsigned int syncinterval;/* P for adaptive mode, 0 otherwise */ +unsigned char silence_value; +unsigned int stride; +int iface, alt_idx; + +spinlock_t lock; +struct list_head list; +}; +struct snd_usb_substream {struct snd_usb_stream *stream;struct usb_device *dev;
sound/usb/endpoint.c +916 -11
999 lines not on this page · raw message
sound/usb/endpoint.h +26 -0
@@ -18,4 +18,30 @@ int snd_usb_substream_prepare(struct snd_usb_substream *subs,int snd_usb_substream_playback_trigger (struct snd_pcm_substream *substream,int cmd);int snd_usb_substream_capture_trigger (struct snd_pcm_substream *substream,int cmd); + +#define SND_USB_ENDPOINT_TYPE_DATA 0 +#define SND_USB_ENDPOINT_TYPE_SYNC 1 + +struct snd_usb_endpoint *snd_usb_add_endpoint (struct snd_usb_audio *chip, +struct usb_host_interface *alts, +int ep_num,int direction,int type); + +int snd_usb_endpoint_set_params (struct snd_usb_endpoint *ep, +struct snd_pcm_hw_params *hw_params, +struct audioformat *fmt, +struct snd_usb_endpoint *sync_ep); + +int snd_usb_endpoint_start (struct snd_usb_endpoint *ep); +void snd_usb_endpoint_stop (struct snd_usb_endpoint *ep, +int force,int can_sleep,int wait); +int snd_usb_endpoint_activate (struct snd_usb_endpoint *ep); +int snd_usb_endpoint_deactivate (struct snd_usb_endpoint *ep); +void snd_usb_endpoint_free (struct list_head *head); + +int snd_usb_endpoint_implict_feedback_sink (struct snd_usb_endpoint *ep); + +void snd_usb_handle_sync_urb (struct snd_usb_endpoint *ep, +struct snd_usb_endpoint *sender, +const struct urb *urb); +#endif /* __USBAUDIO_ENDPOINT_H */
sound/usb/usbaudio.h +1 -0
@@ -47,6 +47,7 @@ struct snd_usb_audio {int num_suspended_intf;struct list_head pcm_list;/* list of pcm streams */ +struct list_head ep_list;/* list of audio-related endpoints */ int pcm_devs;struct list_head midi_list;/* list of midi interfaces */
Signature · 1 line
1.7.7.4
PATCH 3/6 ALSA: snd-usb: switch over to new endpoint streaming logic
In reply to Daniel MackWith the previous commit that added the new streaming model, all endpoint and streaming related code is now in endpoint.c, and pcm.c only acts as a wrapper for handling the packet's payload.
--- sound/usb/card.c | 8 +- sound/usb/card.h | 4 + sound/usb/endpoint.c | 40 ----- sound/usb/endpoint.h | 3 - sound/usb/pcm.c | 417 +++++++++++++++++++++++++++++++++++++++++--------- sound/usb/stream.c | 31 ++++- 6 files changed, 384 insertions(+), 119 deletions(-)
sound/usb/card.c +7 -1
@@ -131,8 +131,9 @@ static void snd_usb_stream_disconnect(struct list_head *head) subs = &as->substream[idx];if (!subs->num_formats)continue ; -snd_usb_release_substream_urbs (subs,1 ); subs->interface =-1 ; + subs->data_endpoint =NULL ; + subs->sync_endpoint =NULL ; } }
@@ -350,6 +351,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, chip->usb_id =USB_ID (le16_to_cpu (dev->descriptor.idVendor),le16_to_cpu (dev->descriptor.idProduct));INIT_LIST_HEAD (&chip->pcm_list); +INIT_LIST_HEAD (&chip->ep_list);INIT_LIST_HEAD (&chip->midi_list);INIT_LIST_HEAD (&chip->mixer_list);
@@ -567,6 +569,10 @@ static void snd_usb_audio_disconnect(struct usb_device *dev,list_for_each (p, &chip->pcm_list) {snd_usb_stream_disconnect (p); } +/* release the endpoint resources */ +list_for_each (p, &chip->ep_list) { +snd_usb_endpoint_free (p); + }/* release the midi resources */ list_for_each (p, &chip->midi_list) {snd_usbmidi_disconnect (p);
sound/usb/card.h +4 -0
@@ -144,6 +144,10 @@ struct snd_usb_substream {struct snd_urb_ctx syncurb[SYNC_URBS ];/* sync urb table */ char *syncbuf;/* sync buffer for all sync URBs */ dma_addr_t sync_dma;/* DMA address of syncbuf */ +/* data and sync endpoints for this stream */ +struct snd_usb_endpoint *data_endpoint; +struct snd_usb_endpoint *sync_endpoint; +unsigned long flags;u64 formats;/* format bitmasks (all or'ed) */ unsigned int num_formats;/* number of supported audio formats (list) */
sound/usb/endpoint.c +0 -40
@@ -911,46 +911,6 @@ void snd_usb_init_substream(struct snd_usb_stream *as, subs->fmt_type = fp->fmt_type; } -int snd_usb_substream_playback_trigger (struct snd_pcm_substream *substream,int cmd) -{ -struct snd_usb_substream *subs = substream->runtime->private_data; - -switch (cmd) { -case SNDRV_PCM_TRIGGER_START : -case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : - subs->ops.prepare = prepare_playback_urb; -return 0 ; -case SNDRV_PCM_TRIGGER_STOP : -return deactivate_urbs_old (subs,0 ,0 ); -case SNDRV_PCM_TRIGGER_PAUSE_PUSH : - subs->ops.prepare = prepare_nodata_playback_urb; -return 0 ; - } - -return -EINVAL ; -} - -int snd_usb_substream_capture_trigger (struct snd_pcm_substream *substream,int cmd) -{ -struct snd_usb_substream *subs = substream->runtime->private_data; - -switch (cmd) { -case SNDRV_PCM_TRIGGER_START : - subs->ops.retire = retire_capture_urb; -return start_urbs (subs, substream->runtime); -case SNDRV_PCM_TRIGGER_STOP : -return deactivate_urbs_old (subs,0 ,0 ); -case SNDRV_PCM_TRIGGER_PAUSE_PUSH : - subs->ops.retire = retire_paused_capture_urb; -return 0 ; -case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : - subs->ops.retire = retire_capture_urb; -return 0 ; - } - -return -EINVAL ; -} -int snd_usb_substream_prepare (struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime) {
sound/usb/endpoint.h +0 -3
@@ -15,9 +15,6 @@ void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force);int snd_usb_substream_prepare (struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime); -int snd_usb_substream_playback_trigger (struct snd_pcm_substream *substream,int cmd); -int snd_usb_substream_capture_trigger (struct snd_pcm_substream *substream,int cmd); -#define SND_USB_ENDPOINT_TYPE_DATA 0#define SND_USB_ENDPOINT_TYPE_SYNC 1
sound/usb/pcm.c +345 -72
491 lines not on this page · raw message
sound/usb/stream.c +28 -3
@@ -73,6 +73,31 @@ static void snd_usb_audio_pcm_free(struct snd_pcm *pcm) } } +/* +* initialize the substream instance. +*/ + +static void snd_usb_init_substream (struct snd_usb_stream *as, +int stream, +struct audioformat *fp) +{ +struct snd_usb_substream *subs = &as->substream[stream]; + +INIT_LIST_HEAD (&subs->fmt_list); +spin_lock_init (&subs->lock); + + subs->stream = as; + subs->direction = stream; + subs->dev = as->chip->dev; + subs->txfr_quirk = as->chip->txfr_quirk; + +snd_usb_set_pcm_ops (as->pcm, stream); + +list_add_tail (&fp->list, &subs->fmt_list); + subs->formats |= fp->formats; + subs->num_formats++; + subs->fmt_type = fp->fmt_type; +}/* * add this endpoint to the chip instance.
@@ -94,9 +119,9 @@ int snd_usb_add_audio_stream(struct snd_usb_audio *chip,if (as->fmt_type != fp->fmt_type)continue ; subs = &as->substream[stream]; -if (!subs->endpoint) +if (!subs->data_endpoint)continue ; -if (subs->endpoint == fp->endpoint) { +if (subs->data_endpoint->ep_num == fp->endpoint) {list_add_tail (&fp->list, &subs->fmt_list); subs->num_formats++; subs->formats |= fp->formats;
@@ -109,7 +134,7 @@ int snd_usb_add_audio_stream(struct snd_usb_audio *chip,if (as->fmt_type != fp->fmt_type)continue ; subs = &as->substream[stream]; -if (subs->endpoint) +if (subs->data_endpoint)continue ; err =snd_pcm_new_stream (as->pcm, stream,1 );if (err <0 )
Signature · 1 line
1.7.7.4
PATCH 4/6 ALSA: snd-usb: remove old streaming logic
In reply to Daniel Mack--- sound/usb/endpoint.c | 851 +------------------------------------------------- sound/usb/endpoint.h | 15 - 2 files changed, 8 insertions(+), 858 deletions(-)
sound/usb/endpoint.c +8 -843
@@ -53,727 +53,19 @@ static inline unsigned get_usb_high_speed_rate(unsigned int rate) }/* -* unlink active urbs. -*/ -static int deactivate_urbs_old (struct snd_usb_substream *subs,int force,int can_sleep) -{ -struct snd_usb_audio *chip = subs->stream->chip; -unsigned int i; -int async; - - subs->running =0 ; - -if (!force && subs->stream->chip->shutdown)/* to be sure... */ -return -EBADFD ; - - async = !can_sleep && chip->async_unlink; - -if (!async &&in_interrupt ()) -return 0 ; - -for (i =0 ; i < subs->nurbs; i++) { -if (test_bit (i, &subs->active_mask)) { -if (!test_and_set_bit (i, &subs->unlink_mask)) { -struct urb *u = subs->dataurb[i].urb; -if (async) -usb_unlink_urb (u); -else -usb_kill_urb (u); - } - } - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { -if (test_bit (i+16 , &subs->active_mask)) { -if (!test_and_set_bit (i+16 , &subs->unlink_mask)) { -struct urb *u = subs->syncurb[i].urb; -if (async) -usb_unlink_urb (u); -else -usb_kill_urb (u); - } - } - } - } -return 0 ; -} - - -/* * release a urb data */ static void release_urb_ctx (struct snd_urb_ctx *u) { -if (u->urb) { -if (u->buffer_size) -usb_free_coherent (u->subs->dev, u->buffer_size, - u->urb->transfer_buffer, - u->urb->transfer_dma); -usb_free_urb (u->urb); - u->urb =NULL ; - } -} - -/* -* wait until all urbs are processed. -*/ -static int wait_clear_urbs_old (struct snd_usb_substream *subs) -{ -unsigned long end_time = jiffies +msecs_to_jiffies (1000 ); -unsigned int i; -int alive; - -do { - alive =0 ; -for (i =0 ; i < subs->nurbs; i++) { -if (test_bit (i, &subs->active_mask)) - alive++; - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { -if (test_bit (i +16 , &subs->active_mask)) - alive++; - } - } -if (! alive) -break ; -schedule_timeout_uninterruptible (1 ); - }while (time_before (jiffies, end_time)); -if (alive) -snd_printk (KERN_ERR "timeout: still %d active urbs..\n" , alive); -return 0 ; -} - -/* -* release a substream -*/ -void snd_usb_release_substream_urbs (struct snd_usb_substream *subs,int force) -{ -int i; - -/* stop urbs (to be sure) */ -deactivate_urbs_old (subs, force,1 ); -wait_clear_urbs_old (subs); - -for (i =0 ; i <MAX_URBS ; i++) -release_urb_ctx (&subs->dataurb[i]); -for (i =0 ; i <SYNC_URBS ; i++) -release_urb_ctx (&subs->syncurb[i]); -usb_free_coherent (subs->dev,SYNC_URBS *4 , - subs->syncbuf, subs->sync_dma); - subs->syncbuf =NULL ; - subs->nurbs =0 ; -} - -/* -* complete callback from data urb -*/ -static void snd_complete_urb_old (struct urb *urb) -{ -struct snd_urb_ctx *ctx = urb->context; -struct snd_usb_substream *subs = ctx->subs; -struct snd_pcm_substream *substream = ctx->subs->pcm_substream; -int err =0 ; - -if ((subs->running && subs->ops.retire (subs, substream->runtime, urb)) || - !subs->running ||/* can be stopped during retire callback */ - (err = subs->ops.prepare (subs, substream->runtime, urb)) <0 || - (err =usb_submit_urb (urb,GFP_ATOMIC )) <0 ) { -clear_bit (ctx->index, &subs->active_mask); -if (err <0 ) { -snd_printd (KERN_ERR "cannot submit urb (err = %d)\n" , err); -snd_pcm_stop (substream,SNDRV_PCM_STATE_XRUN ); - } - } -} - - -/* -* complete callback from sync urb -*/ -static void snd_complete_sync_urb (struct urb *urb) -{ -struct snd_urb_ctx *ctx = urb->context; -struct snd_usb_substream *subs = ctx->subs; -struct snd_pcm_substream *substream = ctx->subs->pcm_substream; -int err =0 ; - -if ((subs->running && subs->ops.retire_sync (subs, substream->runtime, urb)) || - !subs->running ||/* can be stopped during retire callback */ - (err = subs->ops.prepare_sync (subs, substream->runtime, urb)) <0 || - (err =usb_submit_urb (urb,GFP_ATOMIC )) <0 ) { -clear_bit (ctx->index +16 , &subs->active_mask); -if (err <0 ) { -snd_printd (KERN_ERR "cannot submit sync urb (err = %d)\n" , err); -snd_pcm_stop (substream,SNDRV_PCM_STATE_XRUN ); - } - } -} - - -/* -* initialize a substream for plaback/capture -*/ -int snd_usb_init_substream_urbs (struct snd_usb_substream *subs, -unsigned int period_bytes, -unsigned int rate, -unsigned int frame_bits) -{ -unsigned int maxsize, i; -int is_playback = subs->direction ==SNDRV_PCM_STREAM_PLAYBACK ; -unsigned int urb_packs, total_packs, packs_per_ms; -struct snd_usb_audio *chip = subs->stream->chip; - -/* calculate the frequency in 16.16 format */ -if (snd_usb_get_speed (subs->dev) ==USB_SPEED_FULL ) - subs->freqn =get_usb_full_speed_rate (rate); -else - subs->freqn =get_usb_high_speed_rate (rate); - subs->freqm = subs->freqn; - subs->freqshift =INT_MIN ; -/* calculate max. frequency */ -if (subs->maxpacksize) { -/* whatever fits into a max. size packet */ - maxsize = subs->maxpacksize; - subs->freqmax = (maxsize / (frame_bits >>3 )) - << (16 - subs->datainterval); - }else { -/* no max. packet size: just take 25% higher than nominal */ - subs->freqmax = subs->freqn + (subs->freqn >>2 ); - maxsize = ((subs->freqmax +0xffff ) * (frame_bits >>3 )) - >> (16 - subs->datainterval); - } - subs->phase =0 ; - -if (subs->fill_max) - subs->curpacksize = subs->maxpacksize; -else - subs->curpacksize = maxsize; - -if (snd_usb_get_speed (subs->dev) !=USB_SPEED_FULL ) - packs_per_ms =8 >> subs->datainterval; -else - packs_per_ms =1 ; - -if (is_playback) { - urb_packs =max (chip->nrpacks,1 ); - urb_packs =min (urb_packs, (unsigned int )MAX_PACKS ); - }else - urb_packs =1 ; - urb_packs *= packs_per_ms; -if (subs->syncpipe) - urb_packs =min (urb_packs,1U << subs->syncinterval); - -/* decide how many packets to be used */ -if (is_playback) { -unsigned int minsize, maxpacks; -/* determine how small a packet can be */ - minsize = (subs->freqn >> (16 - subs->datainterval)) - * (frame_bits >>3 ); -/* with sync from device, assume it can be 12% lower */ -if (subs->syncpipe) - minsize -= minsize >>3 ; - minsize =max (minsize,1u ); - total_packs = (period_bytes + minsize -1 ) / minsize; -/* we need at least two URBs for queueing */ -if (total_packs <2 ) { - total_packs =2 ; - }else { -/* and we don't want too long a queue either */ - maxpacks =max (MAX_QUEUE * packs_per_ms, urb_packs *2 ); - total_packs =min (total_packs, maxpacks); - } - }else { -while (urb_packs >1 && urb_packs * maxsize >= period_bytes) - urb_packs >>=1 ; - total_packs =MAX_URBS * urb_packs; - } - subs->nurbs = (total_packs + urb_packs -1 ) / urb_packs; -if (subs->nurbs >MAX_URBS ) { -/* too much... */ - subs->nurbs =MAX_URBS ; - total_packs =MAX_URBS * urb_packs; - }else if (subs->nurbs <2 ) { -/* too little - we need at least two packets -* to ensure contiguous playback/capture -*/ - subs->nurbs =2 ; - } - -/* allocate and initialize data urbs */ -for (i =0 ; i < subs->nurbs; i++) { -struct snd_urb_ctx *u = &subs->dataurb[i]; - u->index = i; - u->subs = subs; - u->packets = (i +1 ) * total_packs / subs->nurbs - - i * total_packs / subs->nurbs; - u->buffer_size = maxsize * u->packets; -if (subs->fmt_type ==UAC_FORMAT_TYPE_II ) - u->packets++;/* for transfer delimiter */ - u->urb =usb_alloc_urb (u->packets,GFP_KERNEL ); -if (!u->urb) - goto out_of_memory; - u->urb->transfer_buffer = -usb_alloc_coherent (subs->dev, u->buffer_size, -GFP_KERNEL , &u->urb->transfer_dma); -if (!u->urb->transfer_buffer) - goto out_of_memory; - u->urb->pipe = subs->datapipe; - u->urb->transfer_flags =URB_ISO_ASAP |URB_NO_TRANSFER_DMA_MAP ; - u->urb->interval =1 << subs->datainterval; - u->urb->context = u; - u->urb->complete = snd_complete_urb_old; - } - -if (subs->syncpipe) { -/* allocate and initialize sync urbs */ - subs->syncbuf =usb_alloc_coherent (subs->dev,SYNC_URBS *4 , -GFP_KERNEL , &subs->sync_dma); -if (!subs->syncbuf) - goto out_of_memory; -for (i =0 ; i <SYNC_URBS ; i++) { -struct snd_urb_ctx *u = &subs->syncurb[i]; - u->index = i; - u->subs = subs; - u->packets =1 ; - u->urb =usb_alloc_urb (1 ,GFP_KERNEL ); -if (!u->urb) - goto out_of_memory; - u->urb->transfer_buffer = subs->syncbuf + i *4 ; - u->urb->transfer_dma = subs->sync_dma + i *4 ; - u->urb->transfer_buffer_length =4 ; - u->urb->pipe = subs->syncpipe; - u->urb->transfer_flags =URB_ISO_ASAP | -URB_NO_TRANSFER_DMA_MAP ; - u->urb->number_of_packets =1 ; - u->urb->interval =1 << subs->syncinterval; - u->urb->context = u; - u->urb->complete = snd_complete_sync_urb; - } - } -return 0 ; - -out_of_memory: -snd_usb_release_substream_urbs (subs,0 ); -return -ENOMEM ; -} - -/* -* prepare urb for full speed capture sync pipe -* -* fill the length and offset of each urb descriptor. -* the fixed 10.14 frequency is passed through the pipe. -*/ -static int prepare_capture_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned char *cp = urb->transfer_buffer; -struct snd_urb_ctx *ctx = urb->context; - - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->iso_frame_desc[0 ].length =3 ; - urb->iso_frame_desc[0 ].offset =0 ; - cp[0 ] = subs->freqn >>2 ; - cp[1 ] = subs->freqn >>10 ; - cp[2 ] = subs->freqn >>18 ; -return 0 ; -} - -/* -* prepare urb for high speed capture sync pipe -* -* fill the length and offset of each urb descriptor. -* the fixed 12.13 frequency is passed as 16.16 through the pipe. -*/ -static int prepare_capture_sync_urb_hs (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned char *cp = urb->transfer_buffer; -struct snd_urb_ctx *ctx = urb->context; - - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->iso_frame_desc[0 ].length =4 ; - urb->iso_frame_desc[0 ].offset =0 ; - cp[0 ] = subs->freqn; - cp[1 ] = subs->freqn >>8 ; - cp[2 ] = subs->freqn >>16 ; - cp[3 ] = subs->freqn >>24 ; -return 0 ; -} - -/* -* process after capture sync complete -* - nothing to do -*/ -static int retire_capture_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -return 0 ; -} - -/* -* prepare urb for capture data pipe -* -* fill the offset and length of each descriptor. -* -* we use a temporary buffer to write the captured data. -* since the length of written data is determined by host, we cannot -* write onto the pcm buffer directly... the data is thus copied -* later at complete callback to the global buffer. -*/ -static int prepare_capture_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -int i, offs; -struct snd_urb_ctx *ctx = urb->context; - - offs =0 ; - urb->dev = ctx->subs->dev;/* we need to set this at each time */ -for (i =0 ; i < ctx->packets; i++) { - urb->iso_frame_desc[i].offset = offs; - urb->iso_frame_desc[i].length = subs->curpacksize; - offs += subs->curpacksize; - } - urb->transfer_buffer_length = offs; - urb->number_of_packets = ctx->packets; -return 0 ; -} - -/* -* process after capture complete -* -* copy the data from each desctiptor to the pcm buffer, and -* update the current position. -*/ -static int retire_capture_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned long flags; -unsigned char *cp; -int i; -unsigned int stride, frames, bytes, oldptr; -int period_elapsed =0 ; - - stride = runtime->frame_bits >>3 ; - -for (i =0 ; i < urb->number_of_packets; i++) { - cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset; -if (urb->iso_frame_desc[i].status) { -snd_printd (KERN_ERR "frame %d active: %d\n" , i, urb->iso_frame_desc[i].status); -// continue; - } - bytes = urb->iso_frame_desc[i].actual_length; - frames = bytes / stride; -if (!subs->txfr_quirk) - bytes = frames * stride; -if (bytes % (runtime->sample_bits >>3 ) !=0 ) { -#ifdef CONFIG_SND_DEBUG_VERBOSE -int oldbytes = bytes; -#endif - bytes = frames * stride; -snd_printdd (KERN_ERR "Corrected urb data len. %d->%d\n" , - oldbytes, bytes); - } -/* update the current pointer */ -spin_lock_irqsave (&subs->lock, flags); - oldptr = subs->hwptr_done; - subs->hwptr_done += bytes; -if (subs->hwptr_done >= runtime->buffer_size * stride) - subs->hwptr_done -= runtime->buffer_size * stride; - frames = (bytes + (oldptr % stride)) / stride; - subs->transfer_done += frames; -if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - period_elapsed =1 ; - } -spin_unlock_irqrestore (&subs->lock, flags); -/* copy a data chunk */ -if (oldptr + bytes > runtime->buffer_size * stride) { -unsigned int bytes1 = - runtime->buffer_size * stride - oldptr; -memcpy (runtime->dma_area + oldptr, cp, bytes1); -memcpy (runtime->dma_area, cp + bytes1, bytes - bytes1); - }else { -memcpy (runtime->dma_area + oldptr, cp, bytes); - } - } -if (period_elapsed) -snd_pcm_period_elapsed (subs->pcm_substream); -return 0 ; -} - -/* -* Process after capture complete when paused. Nothing to do. -*/ -static int retire_paused_capture_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -return 0 ; -} - - -/* -* prepare urb for playback sync pipe -* -* set up the offset and length to receive the current frequency. -*/ -static int prepare_playback_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -struct snd_urb_ctx *ctx = urb->context; - - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->iso_frame_desc[0 ].length =min (4u , ctx->subs->syncmaxsize); - urb->iso_frame_desc[0 ].offset =0 ; -return 0 ; -} - -/* -* process after playback sync complete -* -* Full speed devices report feedback values in 10.14 format as samples per -* frame, high speed devices in 16.16 format as samples per microframe. -* Because the Audio Class 1 spec was written before USB 2.0, many high speed -* devices use a wrong interpretation, some others use an entirely different -* format. Therefore, we cannot predict what format any particular device uses -* and must detect it automatically. -*/ -static int retire_playback_sync_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned int f; -int shift; -unsigned long flags; - -if (urb->iso_frame_desc[0 ].status !=0 || - urb->iso_frame_desc[0 ].actual_length <3 ) -return 0 ; - - f =le32_to_cpup (urb->transfer_buffer); -if (urb->iso_frame_desc[0 ].actual_length ==3 ) - f &=0x00ffffff ; -else - f &=0x0fffffff ; -if (f ==0 ) -return 0 ; - -if (unlikely (subs->freqshift ==INT_MIN )) { -/* -* The first time we see a feedback value, determine its format -* by shifting it left or right until it matches the nominal -* frequency value. This assumes that the feedback does not -* differ from the nominal value more than +50% or -25%. -*/ - shift =0 ; -while (f < subs->freqn - subs->freqn /4 ) { - f <<=1 ; - shift++; - } -while (f > subs->freqn + subs->freqn /2 ) { - f >>=1 ; - shift--; - } - subs->freqshift = shift; - } -else if (subs->freqshift >=0 ) - f <<= subs->freqshift; -else - f >>= -subs->freqshift; - -if (likely (f >= subs->freqn - subs->freqn /8 && f <= subs->freqmax)) { -/* -* If the frequency looks valid, set it. -* This value is referred to in prepare_playback_urb(). -*/ -spin_lock_irqsave (&subs->lock, flags); - subs->freqm = f; -spin_unlock_irqrestore (&subs->lock, flags); - }else { -/* -* Out of range; maybe the shift value is wrong. -* Reset it so that we autodetect again the next time. -*/ - subs->freqshift =INT_MIN ; - } - -return 0 ; -} - -/* determine the number of frames in the next packet */ -static int snd_usb_audio_next_packet_size (struct snd_usb_substream *subs) -{ -if (subs->fill_max) -return subs->maxframesize; -else { - subs->phase = (subs->phase &0xffff ) - + (subs->freqm << subs->datainterval); -return min (subs->phase >>16 , subs->maxframesize); - } -} - -/* -* Prepare urb for streaming before playback starts or when paused. -* -* We don't have any data, so we send silence. -*/ -static int prepare_nodata_playback_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned int i, offs, counts; -struct snd_urb_ctx *ctx = urb->context; -int stride = runtime->frame_bits >>3 ; - - offs =0 ; - urb->dev = ctx->subs->dev; -for (i =0 ; i < ctx->packets; ++i) { - counts =snd_usb_audio_next_packet_size (subs); - urb->iso_frame_desc[i].offset = offs * stride; - urb->iso_frame_desc[i].length = counts * stride; - offs += counts; - } - urb->number_of_packets = ctx->packets; - urb->transfer_buffer_length = offs * stride; -memset (urb->transfer_buffer, - runtime->format ==SNDRV_PCM_FORMAT_U8 ?0x80 :0 , - offs * stride); -return 0 ; -} - -/* -* prepare urb for playback data pipe -* -* Since a URB can handle only a single linear buffer, we must use double -* buffering when the data to be transferred overflows the buffer boundary. -* To avoid inconsistencies when updating hwptr_done, we use double buffering -* for all URBs. -*/ -static int prepare_playback_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -int i, stride; -unsigned int counts, frames, bytes; -unsigned long flags; -int period_elapsed =0 ; -struct snd_urb_ctx *ctx = urb->context; +if (!u->urb) +return ; - stride = runtime->frame_bits >>3 ; - - frames =0 ; - urb->dev = ctx->subs->dev;/* we need to set this at each time */ - urb->number_of_packets =0 ; -spin_lock_irqsave (&subs->lock, flags); -for (i =0 ; i < ctx->packets; i++) { - counts =snd_usb_audio_next_packet_size (subs); -/* set up descriptor */ - urb->iso_frame_desc[i].offset = frames * stride; - urb->iso_frame_desc[i].length = counts * stride; - frames += counts; - urb->number_of_packets++; - subs->transfer_done += counts; -if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - period_elapsed =1 ; -if (subs->fmt_type ==UAC_FORMAT_TYPE_II ) { -if (subs->transfer_done >0 ) { -/* FIXME: fill-max mode is not -* supported yet */ - frames -= subs->transfer_done; - counts -= subs->transfer_done; - urb->iso_frame_desc[i].length = - counts * stride; - subs->transfer_done =0 ; - } - i++; -if (i < ctx->packets) { -/* add a transfer delimiter */ - urb->iso_frame_desc[i].offset = - frames * stride; - urb->iso_frame_desc[i].length =0 ; - urb->number_of_packets++; - } -break ; - } - } -if (period_elapsed)/* finish at the period boundary */ -break ; - } - bytes = frames * stride; -if (subs->hwptr_done + bytes > runtime->buffer_size * stride) { -/* err, the transferred area goes over buffer boundary. */ -unsigned int bytes1 = - runtime->buffer_size * stride - subs->hwptr_done; -memcpy (urb->transfer_buffer, - runtime->dma_area + subs->hwptr_done, bytes1); -memcpy (urb->transfer_buffer + bytes1, - runtime->dma_area, bytes - bytes1); - }else { -memcpy (urb->transfer_buffer, - runtime->dma_area + subs->hwptr_done, bytes); - } - subs->hwptr_done += bytes; -if (subs->hwptr_done >= runtime->buffer_size * stride) - subs->hwptr_done -= runtime->buffer_size * stride; - -/* update delay with exact number of samples queued */ - runtime->delay = subs->last_delay; - runtime->delay += frames; - subs->last_delay = runtime->delay; - -/* realign last_frame_number */ - subs->last_frame_number =usb_get_current_frame_number (subs->dev); - subs->last_frame_number &=0xFF ;/* keep 8 LSBs */ - -spin_unlock_irqrestore (&subs->lock, flags); - urb->transfer_buffer_length = bytes; -if (period_elapsed) -snd_pcm_period_elapsed (subs->pcm_substream); -return 0 ; -} - -/* -* process after playback data complete -* - decrease the delay count again -*/ -static int retire_playback_urb (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime, -struct urb *urb) -{ -unsigned long flags; -int stride = runtime->frame_bits >>3 ; -int processed = urb->transfer_buffer_length / stride; -int est_delay; - -spin_lock_irqsave (&subs->lock, flags); - - est_delay =snd_usb_pcm_delay (subs, runtime->rate); -/* update delay with exact number of samples played */ -if (processed > subs->last_delay) - subs->last_delay =0 ; -else - subs->last_delay -= processed; - runtime->delay = subs->last_delay; - -/* -* Report when delay estimate is off by more than 2ms. -* The error should be lower than 2ms since the estimate relies -* on two reads of a counter updated every ms. -*/ -if (abs (est_delay - subs->last_delay) *1000 > runtime->rate *2 ) -snd_printk (KERN_DEBUG "delay: estimated %d, actual %d\n" , - est_delay, subs->last_delay); - -spin_unlock_irqrestore (&subs->lock, flags); -return 0 ; +if (u->buffer_size) +usb_free_coherent (u->ep->chip->dev, u->buffer_size, + u->urb->transfer_buffer, + u->urb->transfer_dma); +usb_free_urb (u->urb); + u->urb =NULL ; }static const char *usb_error_string (int err)
@@ -801,133 +93,6 @@ static const char *usb_error_string(int err) } } -/* -* set up and start data/sync urbs -*/ -static int start_urbs (struct snd_usb_substream *subs,struct snd_pcm_runtime *runtime) -{ -unsigned int i; -int err; - -if (subs->stream->chip->shutdown) -return -EBADFD ; - -for (i =0 ; i < subs->nurbs; i++) { -if (snd_BUG_ON (!subs->dataurb[i].urb)) -return -EINVAL ; -if (subs->ops.prepare (subs, runtime, subs->dataurb[i].urb) <0 ) { -snd_printk (KERN_ERR "cannot prepare datapipe for urb %d\n" , i); - goto __error; - } - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { -if (snd_BUG_ON (!subs->syncurb[i].urb)) -return -EINVAL ; -if (subs->ops.prepare_sync (subs, runtime, subs->syncurb[i].urb) <0 ) { -snd_printk (KERN_ERR "cannot prepare syncpipe for urb %d\n" , i); - goto __error; - } - } - } - - subs->active_mask =0 ; - subs->unlink_mask =0 ; - subs->running =1 ; -for (i =0 ; i < subs->nurbs; i++) { - err =usb_submit_urb (subs->dataurb[i].urb,GFP_ATOMIC ); -if (err <0 ) { -snd_printk (KERN_ERR "cannot submit datapipe " -"for urb %d, error %d: %s\n" , - i, err,usb_error_string (err)); - goto __error; - } -set_bit (i, &subs->active_mask); - } -if (subs->syncpipe) { -for (i =0 ; i <SYNC_URBS ; i++) { - err =usb_submit_urb (subs->syncurb[i].urb,GFP_ATOMIC ); -if (err <0 ) { -snd_printk (KERN_ERR "cannot submit syncpipe " -"for urb %d, error %d: %s\n" , - i, err,usb_error_string (err)); - goto __error; - } -set_bit (i +16 , &subs->active_mask); - } - } -return 0 ; - - __error: -// snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN); -deactivate_urbs_old (subs,0 ,0 ); -return -EPIPE ; -} - - -/* -*/ -static struct snd_urb_ops audio_urb_ops[2 ] = { - { - .prepare = prepare_nodata_playback_urb, - .retire = retire_playback_urb, - .prepare_sync = prepare_playback_sync_urb, - .retire_sync = retire_playback_sync_urb, - }, - { - .prepare = prepare_capture_urb, - .retire = retire_capture_urb, - .prepare_sync = prepare_capture_sync_urb, - .retire_sync = retire_capture_sync_urb, - }, -}; - -/* -* initialize the substream instance. -*/ - -void snd_usb_init_substream (struct snd_usb_stream *as, -int stream,struct audioformat *fp) -{ -struct snd_usb_substream *subs = &as->substream[stream]; - -INIT_LIST_HEAD (&subs->fmt_list); -spin_lock_init (&subs->lock); - - subs->stream = as; - subs->direction = stream; - subs->dev = as->chip->dev; - subs->txfr_quirk = as->chip->txfr_quirk; - subs->ops = audio_urb_ops[stream]; -if (snd_usb_get_speed (subs->dev) >=USB_SPEED_HIGH ) - subs->ops.prepare_sync = prepare_capture_sync_urb_hs; - -snd_usb_set_pcm_ops (as->pcm, stream); - -list_add_tail (&fp->list, &subs->fmt_list); - subs->formats |= fp->formats; - subs->endpoint = fp->endpoint; - subs->num_formats++; - subs->fmt_type = fp->fmt_type; -} - -int snd_usb_substream_prepare (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime) -{ -/* clear urbs (to be sure) */ -deactivate_urbs_old (subs,0 ,1 ); -wait_clear_urbs_old (subs); - -/* for playback, submit the URBs now; otherwise, the first hwptr_done -* updates for all URBs would happen at the same time when starting */ -if (subs->direction ==SNDRV_PCM_STREAM_PLAYBACK ) { - subs->ops.prepare = prepare_nodata_playback_urb; -return start_urbs (subs, runtime); - } - -return 0 ; -} -int snd_usb_endpoint_implict_feedback_sink (struct snd_usb_endpoint *ep) { return ep->sync_master &&
sound/usb/endpoint.h +0 -15
@@ -1,21 +1,6 @@#ifndef __USBAUDIO_ENDPOINT_H#define __USBAUDIO_ENDPOINT_H -void snd_usb_init_substream (struct snd_usb_stream *as, -int stream, -struct audioformat *fp); - -int snd_usb_init_substream_urbs (struct snd_usb_substream *subs, -unsigned int period_bytes, -unsigned int rate, -unsigned int frame_bits); - -void snd_usb_release_substream_urbs (struct snd_usb_substream *subs,int force); - -int snd_usb_substream_prepare (struct snd_usb_substream *subs, -struct snd_pcm_runtime *runtime); - -#define SND_USB_ENDPOINT_TYPE_DATA 0#define SND_USB_ENDPOINT_TYPE_SYNC 1
Signature · 1 line
1.7.7.4
PATCH 5/6 ALSA: snd-usb: add support for implicit feedback
In reply to Daniel MackImplicit feedback is a streaming mode that does not rely on dedicated sync endpoints but uses the information provided by record streams to clock output streams. Now that the streaming logic is decoupled from the PCM streams, this is easy to implement.
--- sound/usb/pcm.c | 37 ++++++++++++++++++++++++++----------- 1 files changed, 26 insertions(+), 11 deletions(-)
sound/usb/pcm.c +26 -11
@@ -300,7 +300,7 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)struct usb_interface *iface;unsigned int ep, attr;int is_playback = subs->direction ==SNDRV_PCM_STREAM_PLAYBACK ; -int err; +int err, implicit_fb =0 ; iface =usb_ifnum_to_if (dev, fmt->iface);if (WARN_ON (!iface))
@@ -325,25 +325,34 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)* assume it as adaptive-out or sync-in. */ attr = fmt->ep_attr &USB_ENDPOINT_SYNCTYPE ; -if (((is_playback && attr ==USB_ENDPOINT_SYNC_ASYNC ) || - (! is_playback && attr ==USB_ENDPOINT_SYNC_ADAPTIVE )) && - altsd->bNumEndpoints >=2 ) { -switch (subs->stream->chip->usb_id) { -case USB_ID (0x0763 ,0x2080 ):/* M-Audio FastTrack Ultra */ -case USB_ID (0x0763 ,0x2081 ): + +switch (subs->stream->chip->usb_id) { +case USB_ID (0x0763 ,0x2080 ):/* M-Audio FastTrack Ultra */ +case USB_ID (0x0763 ,0x2081 ): +if (is_playback) { + implicit_fb =1 ; ep =0x81 ; iface =usb_ifnum_to_if (dev,2 ); + +if (!iface || iface->num_altsetting ==0 ) +return -EINVAL ; + alts = &iface->altsetting[1 ]; goto add_sync_ep; } + } +if (((is_playback && attr ==USB_ENDPOINT_SYNC_ASYNC ) || + (!is_playback && attr ==USB_ENDPOINT_SYNC_ADAPTIVE )) && + altsd->bNumEndpoints >=2 ) {/* check sync-pipe endpoint */ /* ... and check descriptor size before accessing bSynchAddress because there is a version of the SB Audigy 2 NX firmware lacking the audio fields in the endpoint descriptors */ if ((get_endpoint (alts,1 )->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) !=0x01 || (get_endpoint (alts,1 )->bLength >=USB_DT_ENDPOINT_AUDIO_SIZE && -get_endpoint (alts,1 )->bSynchAddress !=0 )) { +get_endpoint (alts,1 )->bSynchAddress !=0 && + !implicit_fb)) {snd_printk (KERN_ERR "%d:%d:%d : invalid synch pipe\n" , dev->devnum, fmt->iface, fmt->altsetting);return -EINVAL ;
@@ -351,16 +360,22 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) ep =get_endpoint (alts,1 )->bEndpointAddress;if (get_endpoint (alts,0 )->bLength >=USB_DT_ENDPOINT_AUDIO_SIZE && (( is_playback && ep != (unsigned int )(get_endpoint (alts,0 )->bSynchAddress |USB_DIR_IN )) || - (!is_playback && ep != (unsigned int )(get_endpoint (alts,0 )->bSynchAddress & ~USB_DIR_IN )))) { + (!is_playback && ep != (unsigned int )(get_endpoint (alts,0 )->bSynchAddress & ~USB_DIR_IN )) || + ( is_playback && !implicit_fb))) {snd_printk (KERN_ERR "%d:%d:%d : invalid synch pipe\n" , dev->devnum, fmt->iface, fmt->altsetting);return -EINVAL ; } + + implicit_fb = (get_endpoint (alts,1 )->bmAttributes &USB_ENDPOINT_USAGE_MASK ) + ==USB_ENDPOINT_USAGE_IMPLICIT_FB ; + add_sync_ep: subs->sync_endpoint =snd_usb_add_endpoint (subs->stream->chip, alts, ep, !subs->direction, -SND_USB_ENDPOINT_TYPE_SYNC ); - + implicit_fb ? +SND_USB_ENDPOINT_TYPE_DATA : +SND_USB_ENDPOINT_TYPE_SYNC );if (!subs->sync_endpoint)return -EINVAL ;
Signature · 1 line
1.7.7.4
PATCH 6/6 ALSA: snd-usb: add some documentation
In reply to Daniel MackDocument the new streaming code and some of the functions so that contributers can catch up easier.
--- sound/usb/endpoint.c | 182 +++++++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 171 insertions(+), 11 deletions(-)
sound/usb/endpoint.c +171 -11
@@ -35,6 +35,32 @@#define EP_FLAG_RUNNING 1/* +* snd_usb_endpoint is a model that abstracts everything related to an +* USB endpoint and its streaming. +* +* There are functions to activate and deactivate the streaming URBs and +* optinal callbacks to let the pcm logic handle the actual content of the +* packets for playback and record. Thus, the bus streaming and the audio +* handlers are fully decoupled. +* +* There are two different types of endpoints in for audio applications. +* +* SND_USB_ENDPOINT_TYPE_DATA handles full audio data payload for both +* inbound and outbound traffic. +* +* SND_USB_ENDPOINT_TYPE_SYNC are for inbound traffic only and expect the +* payload to carry Q16.16 formatted sync information (3 or 4 bytes). +* +* Each endpoint has to be configured (by calling +* snd_usb_endpoint_set_params()) before it can be used. +* +* The model incorporates a reference counting, so that multiple users +* can call snd_usb_endpoint_start() and snd_usb_endpoint_stop(), and +* only the first user will effectively start the URBs, and only the last +* one will tear them down again. +*/ + +/* * convert a sampling rate into our full speed format (fs/1000 in Q16.16) * this will overflow at approx 524 kHz */
@@ -93,6 +119,14 @@ static const char *usb_error_string(int err) } } +/** +* snd_usb_endpoint_implicit_feedback_sink: Report endpoint usage type +* +* @ep: The endpoint +* +* Determine whether an endpoint is driven by an implicit feedback +* data endpoint source. +*/ int snd_usb_endpoint_implict_feedback_sink (struct snd_usb_endpoint *ep) { return ep->sync_master &&
@@ -101,7 +135,13 @@ int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep)usb_pipeout (ep->pipe); } -/* determine the number of frames in the next packet */ +/* +* For streaming based on information derived from sync endpoints, +* prepare_outbound_urb_sizes() will call next_packet_size() to +* determine the number of samples to be sent in the next packet. +* +* For implicit feedback, next_packet_size() is unused. +*/ static int next_packet_size (struct snd_usb_endpoint *ep) {unsigned long flags;
@@ -239,6 +279,19 @@ static inline void prepare_inbound_urb(struct snd_usb_endpoint *ep, } } +/* +* Send output urbs that have been prepared previously. Urbs are dequeued +* from ep->ready_playback_urbs and in case there there aren't any available +* or there are no packets that have been prepared, this function does +* nothing. +* +* The reason why the functionality of sending and preparing urbs is separated +* is that host controllers don't guarantee an ordering in returing inbound +* and outbound packets to their submitters. +* +* This function is only used for implicit feedback endpoints. For endpoints +* driven by sync endpoints, urbs are submitted from their completion handler. +*/ static void queue_pending_output_urbs (struct snd_usb_endpoint *ep) {unsigned long flags;
@@ -268,6 +321,7 @@ static void queue_pending_output_urbs(struct snd_usb_endpoint *ep)for (i =0 ; i < packet->packets; i++) ctx->packet_size[i] = packet->packet_size[i]; +/* call the data handler to fill in playback data */ prepare_outbound_urb (ep, ctx); err =usb_submit_urb (ctx->urb,GFP_ATOMIC );
@@ -335,6 +389,22 @@ exit_clear:clear_bit (ctx->index, &ep->active_mask); } +/** +* snd_usb_add_endpoint: Add an endpoint to an audio chip +* +* @chip: The chip +* @alts: The USB host interface +* @ep_num: The number of the endpoint to use +* @direction: SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE +* @type: SND_USB_ENDPOINT_TYPE_DATA or SND_USB_ENDPOINT_TYPE_SYNC +* +* If the requested endpoint has not been added to the given chip before, +* a new instance is created. Otherwise, a pointer to the previoulsy +* created instance is returned. In case of any error, NULL is returned. +* +* New endpoints will be added to chip->ep_list and must be freed by +* calling snd_usb_endpoint_free(). +*/ struct snd_usb_endpoint *snd_usb_add_endpoint (struct snd_usb_audio *chip,struct usb_host_interface *alts,int ep_num,int direction,int type)
@@ -507,6 +577,9 @@ static void release_urbs(struct snd_usb_endpoint *ep, int force) ep->nurbs =0 ; } +/* +* configure a data endpoint +*/ static int data_ep_set_params(struct snd_usb_endpoint *ep, struct snd_pcm_hw_params *hw_params, struct audioformat *fmt,
@@ -629,6 +702,9 @@ out_of_memory:return -ENOMEM ; } +/* +* configure a sync endpoint +*/ static int sync_ep_set_params (struct snd_usb_endpoint *ep,struct snd_pcm_hw_params *hw_params,struct audioformat *fmt)
@@ -669,6 +745,15 @@ out_of_memory:return -ENOMEM ; } +/** +* snd_usb_endpoint_set_params: configure an snd_endpoint +* +* @ep: the endpoint to configure +* +* Determine the number of of URBs to be used on this endpoint. +* An endpoint must be configured before it can be started. +* An endpoint that is already running can not be reconfigured. +*/ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, struct snd_pcm_hw_params *hw_params, struct audioformat *fmt,
@@ -717,6 +802,19 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,return err; } +/** +* snd_usb_endpoint_start: start an snd_usb_endpoint +* +* @ep: the endpoint to start +* +* A call to this function will increment the use count of the endpoint. +* In case this not already running, the URBs for this endpoint will be +* submitted. Otherwise, this function does nothing. +* +* Must be balanced to calls of snd_usb_endpoint_stop(). +* +* Returns an error if the URB submission failed, 0 in all other cases. +*/ int snd_usb_endpoint_start (struct snd_usb_endpoint *ep) {int err;
@@ -788,6 +886,17 @@ __error:return -EPIPE ; } +/** +* snd_usb_endpoint_stop: stop an snd_usb_endpoint +* +* @ep: the endpoint to stop (may be NULL) +* +* A call to this function will decrement the use count of the endpoint. +* In case the last user has requested the endpoint stop, the URBs will +* actually deactivated. +* +* Must be balanced to calls of snd_usb_endpoint_start(). +*/ void snd_usb_endpoint_stop (struct snd_usb_endpoint *ep,int force,int can_sleep,int wait) {
@@ -812,6 +921,19 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, } } +/** +* snd_usb_endpoint_activate: activate an snd_usb_endpoint +* +* @ep: the endpoint to activate +* +* If the endpoint is not currently in use, this functions will select the +* correct alternate interface setting for the interface of this endpoint. +* +* In case of any active users, this functions does nothing. +* +* Returns an error if usb_set_interface() failed, 0 in all other +* cases. +*/ int snd_usb_endpoint_activate (struct snd_usb_endpoint *ep) {if (ep->use_count !=0 )
@@ -835,6 +957,19 @@ int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)return -EBUSY ; } +/** +* snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint +* +* @ep: the endpoint to deactivate +* +* If the endpoint is not currently in use, this functions will select the +* alternate interface setting 0 for the interface of this endpoint. +* +* In case of any active users, this functions does nothing. +* +* Returns an error if usb_set_interface() failed, 0 in all other +* cases. +*/ int snd_usb_endpoint_deactivate (struct snd_usb_endpoint *ep) {if (!ep)
@@ -860,6 +995,13 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)return -EBUSY ; } +/** snd_usb_endpoint_free: Free the resources of an snd_usb_endpoint +* +* @ep: the list header of the endpoint to free +* +* This function does not care for the endpoint's use count but will tear +* down all the streaming URBs immediately and free all resources. +*/ void snd_usb_endpoint_free (struct list_head *head) {struct snd_usb_endpoint *ep;
@@ -869,15 +1011,15 @@ void snd_usb_endpoint_free(struct list_head *head)kfree (ep); } -/* -* process after playback sync complete -* -* Full speed devices report feedback values in 10.14 format as samples per -* frame, high speed devices in 16.16 format as samples per microframe. -* Because the Audio Class 1 spec was written before USB 2.0, many high speed -* devices use a wrong interpretation, some others use an entirely different -* format. Therefore, we cannot predict what format any particular device uses -* and must detect it automatically. +/** +* snd_usb_handle_sync_urb: parse an USB sync packet +* +* @ep: the endpoint to handle the packet +* @sender: the sending endpoint +* @urb: the received packet +* +* This function is called from the context of an endpoint that received +* the packet and is used to let another endpoint object handle the payload. */ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, struct snd_usb_endpoint *sender,
@@ -889,6 +1031,11 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,snd_BUG_ON (ep == sender); +/* +* In case the endpoint is operating in implicit feedback mode, prepare +* and a new outbound URB that has the same layout as the received +* packet and add it to the list of pending urbs. +*/ if (snd_usb_endpoint_implict_feedback_sink (ep) && ep->use_count !=0 ) {
@@ -938,7 +1085,20 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,return ; } -/* parse sync endpoint packet */ +/* +* process after playback sync complete +* +* Full speed devices report feedback values in 10.14 format as samples +* per frame, high speed devices in 16.16 format as samples per +* microframe. +* +* Because the Audio Class 1 spec was written before USB 2.0, many high +* speed devices use a wrong interpretation, some others use an +* entirely different format. +* +* Therefore, we cannot predict what format any particular device uses +* and must detect it automatically. +*/ if (urb->iso_frame_desc[0 ].status !=0 || urb->iso_frame_desc[0 ].actual_length <3 )
Signature · 1 line
1.7.7.4
Quoted 9 lines · Daniel Mack
Fortunately, the effects reported by Aurélien were easy to fix, and indeed just regressions from previous version of the patch set. Those are now out of the way, so here's version 6.
One thing that has also been added here is a sixth patch that adds some documentation to
endpoint.cto explain the concept of the new implementation.Thanks, and please have more test results coming.
Any chance that more people who've been waiting for support of the FTU can use the lazy time between the years and quickly test this set?
As it affects all USB devices, results from all other snd-usb users are as important and welcome :)
Thanks,
Daniel
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Daniel,
2011/12/30 Daniel Mack <[email protected]>:
Quoted 2 lines
Any chance that more people who've been waiting for support of the FTU can use the lazy time between the years and quickly test this set?
Could you please put a combined patch on your github place? Should it be OK to use the alsa-driver/alsa-kernel update approach or would I need to build a complete kernel image?
Thanks,
Felix
Quoted 8 lines · Felix Homann
Hi Daniel,
2011/12/30 Daniel Mack <[email protected]>:
Quoted 3 lines
Any chance that more people who've been waiting for support of the FTU can use the lazy time between the years and quickly test this set?
Could you please put a combined patch on your github place?
Done:
https://gist.github.com/1168715
Quoted 2 lines
Should it be OK to use the alsa-driver/alsa-kernel update approach or would I need to build a complete kernel image?
Take Linus' tree, merge Takashi's tree (fromgit://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git master) and then apply the gist.
Daniel
Quoted 6 lines
Yes, any kind of USB audio device is good.
Thanks for heling test! :)
So sadly not all is well in my world the logitech is only registering as a mono device for some reason.
nevyn@cetacea:~$ speaker-test -c 2 -D hw:Headset
speaker-test 1.0.24.2
Playback device is hw:Headset
Stream parameters are 48000Hz, S16_LE, 2 channels Using 16 octaves of pink noise
Channels count (2) not available for playbacks: Invalid argument Setting of hwparams failed: Invalid argument
it's clearly stereo. lsusb -vv attached for reference
h
Quoted 14 lines · Grant Diffey
Yes, any kind of USB audio device is good.
Quoted 5 lines
Thanks for heling test! :)
So sadly not all is well in my world the logitech is only registering as a mono device for some reason.
nevyn@cetacea:~$ speaker-test -c 2 -D hw:Headsetspeaker-test 1.0.24.2
Quoted 9 lines
Playback device is hw:Headset
Stream parameters are 48000Hz,S16_LE, 2 channels Using 16 octaves of pink noise
Channels count (2) not available for playbacks: Invalid argument Setting of hwparams failed: Invalid argumentit's clearly stereo. lsusb -vv attached for reference
This also affects the 3.2-rc2 version I compiled a few weeks ago
3.0.0-rc5 correctly registers the device as stereo.
Quoted 3 lines · Daniel Mack
Any chance that more people who've been waiting for support of the FTU can use the lazy time between the years and quickly test this set?
OK, it doesn't work for me. Each time I try to start a stream I get error messages like this:
cannot submit urb 0, error -28: not enough bandwidth
This doesn't need to be related to your patch. I might even have messed something up in the rc3 kernels config. How can I tell?
Quoted 4 lines
OK, it doesn't work for me. Each time I try to start a stream I get error messages like this:
cannot submit urb 0, error -28: not enough bandwidth
Hi Felix,
Is this when using the FTU or another USB device?
Would your USB device by any chance be of type USB 1, and the type of the USB port on your machine EHCI?
If so, could it be related to this problem?
http://lists.linuxaudio.org/pipermail/linux-audio-user/2011-November/081814.html
There used to be a problem with EHCI and USB1 soundcards. I never got my Edirol UA-25Ex to work on my machine, gettting the exact same error as the one you described.
But, few weeks ago, while testing the RC 3.2 kernel with Daniel's patch, it worked.
I don't believe Daniel's patch fixed the problem, but more the changes done in 3.2 by Clemens.
Now, after more testing, it turns out my Edirol UA25-Ex works only if I have a pretty high latency on Jack (25ms).
If I try and decrease the Frames/Period, then the bandwitdh issue occurs again (mind me, it's way better then before where the sound card wouldn't work in Full Duplex)...
Hope this helps,
Aurélien
Hi Aurélien,
2011/12/31 Aurélien Leblond <[email protected]>:> Is this when using the FTU or another USB device?
It's the FTU. I don't have any other USB audio devices here which I could test.
Quoted 1 line
Would your USB device by any chance be of type USB 1, and the type of> the USB port on your machine EHCI?
So, no, it's not a USB 1 device. But it's on a EHCI port. Unfortunately, I can't test the patch on a different machine at thistime. But I will try the same kernel without Daniel's patch set assoon as possible.
Regards,
Felix
Happy New Year!
That being said, I've tested a kernel without Daniel's patch set. It doesn't work either. The error messages are only slightly different:
Jan 1 11:52:31 weasel mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1" Jan 1 11:52:31 weasel mtp-probe: bus: 1, device: 4 was not an MTP device Jan 1 11:52:31 weasel kernel: [ 161.880773] usbcore: registered new interface driver snd-usb-audio Jan 1 11:52:34 weasel kernel: [ 164.284980] cannot submit datapipe
for urb 0, error -28: not enough bandwidth
So, It's not related to Daniel's rework. But nevertheless, something's broken...
So I've had a chance to do some testing. I can reliably generate then following trace with daniels patch on 3.2-rt10
[ 188.561901] ------------[ cut here ]------------ [ 188.561908] WARNING: at fs/proc/generic.c:586 proc_register+0x181/0x1c7() [ 188.561909] Hardware name: HP Compaq 6910p [ 188.561911] proc_dir_entry 'card1/pcm0p' already registered [ 188.561912] Modules linked in: snd_usb_audio snd_usbmidi_lib
snd_seq_dummy acpi_cpufreq mperf cpufreq_userspace cpufreq_stats cpufreq_conservative cpufreq_powersave ppdev lp parport microcode binfmt_misc uinput fuse nfsd exportfs nfs lockd fscache auth_rpcgss nfs_acl sunrpc ext2 firewire_sbp2 loop btusb bluetooth snd_hda_codec_analog arc4 iwl4965 iwl_legacy i915 mac80211 uhci_hcd snd_hda_intel snd_hda_codec ehci_hcd drm_kms_helper snd_hwdep drm snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi cfg80211 snd_rawmidi snd_seq_midi_event snd_seq usbcore sr_mod mmc_block snd_timer tpm_infineon pata_pcmcia snd_seq_device firewire_ohci snd sdhci_pci i2c_algo_bit irda cdrom sdhci joydev pcmcia tpm_tis ata_generic ata_piix hp_wmi firewire_core i2c_core yenta_socket pcmcia_rsrc iTCO_wdt mmc_core battery pcmcia_core sparse_keymap ac power_supply rfkill pcspkr soundcore tpm tpm_bios wmi iTCO_vendor_support evdev crc_itu_t crc_ccitt psmouse processor container video usb_common snd_page_alloc serio_raw button ext3 jbd mbcache sha256_generic aes_x86_64 aes_generic cbc dm_crypt dm_mod sd_mod crc_t10dif ahci libahci libata scsi_mod fan thermal thermal_sys
[ 188.561979] Pid: 621, comm: khubd Not tainted 3.2.0-rt10-00255-g530565d #5 [ 188.561980] Call Trace: [ 188.561986] [<ffffffff81036273>] ? warn_slowpath_common+0x78/0x8c [ 188.561989] [<ffffffff8103631f>] ? warn_slowpath_fmt+0x45/0x4a [ 188.561993] [<ffffffff8102df06>] ? get_parent_ip+0x9/0x1b [ 188.561995] [<ffffffff81123ac5>] ? proc_register+0x181/0x1c7 [ 188.561997] [<ffffffff81123e2c>] ? create_proc_entry+0x6e/0x85 [ 188.562020] [<ffffffffa0237c18>] ? snd_info_register+0x35/0xbd [snd] [ 188.562026] [<ffffffffa02cdf89>] ? snd_pcm_new_stream+0xd6/0x417 [snd_pcm] [ 188.562031] [<ffffffffa05b69e3>] ? snd_usb_add_audio_stream+0xd5/0x21c [snd_usb_audio] [ 188.562035] [<ffffffffa05b6fd3>] ? snd_usb_parse_audio_interface+0x4a9/0x556 [snd_usb_audio] [ 188.562039] [<ffffffffa05ae276>] ? snd_usb_create_stream+0xed/0x126 [snd_usb_audio] [ 188.562043] [<ffffffffa05aea74>] ? usb_audio_probe+0x61d/0x72d [snd_usb_audio] [ 188.562057] [<ffffffffa028c6e3>] ? usb_probe_interface+0xf8/0x163 [usbcore] [ 188.562062] [<ffffffff812170f1>] ? driver_probe_device+0xa8/0x138 [ 188.562064] [<ffffffff812171f0>] ? __driver_attach+0x6f/0x6f [ 188.562066] [<ffffffff81216120>] ? bus_for_each_drv+0x4a/0x7e [ 188.562069] [<ffffffff81217012>] ? device_attach+0x6f/0x8f [ 188.562071] [<ffffffff8121692c>] ? bus_probe_device+0x1f/0x37 [ 188.562073] [<ffffffff8121520a>] ? device_add+0x3d4/0x577 [ 188.562076] [<ffffffff8102df06>] ? get_parent_ip+0x9/0x1b [ 188.562078] [<ffffffff81030bf0>] ? migrate_enable+0x150/0x16a [ 188.562085] [<ffffffffa028b2b0>] ? usb_set_configuration+0x53f/0x594 [usbcore] [ 188.562088] [<ffffffff811304e6>] ? sysfs_do_create_link+0x149/0x194 [ 188.562094] [<ffffffffa029231a>] ? generic_probe+0x45/0x73 [usbcore] [ 188.562097] [<ffffffff812170f1>] ? driver_probe_device+0xa8/0x138 [ 188.562099] [<ffffffff812171f0>] ? __driver_attach+0x6f/0x6f [ 188.562101] [<ffffffff81216120>] ? bus_for_each_drv+0x4a/0x7e [ 188.562104] [<ffffffff81217012>] ? device_attach+0x6f/0x8f [ 188.562106] [<ffffffff8121692c>] ? bus_probe_device+0x1f/0x37 [ 188.562108] [<ffffffff8121520a>] ? device_add+0x3d4/0x577 [ 188.562110] [<ffffffff81214793>] ? dev_printk+0x48/0x4d [ 188.562116] [<ffffffffa0285188>] ? usb_new_device+0x124/0x198 [usbcore] [ 188.562122] [<ffffffffa02861eb>] ? hub_thread+0x964/0xe54 [usbcore] [ 188.562124] [<ffffffff8102abf4>] ? hrtick_start_fair+0x1a/0x15b [ 188.562127] [<ffffffff8102000a>] ? kern_addr_valid+0x5/0x93 [ 188.562131] [<ffffffff8131adb9>] ? __schedule+0x531/0x548 [ 188.562135] [<ffffffff8104ff82>] ? __init_waitqueue_head+0x39/0x39 [ 188.562140] [<ffffffffa0285887>] ? usb_remote_wakeup+0x2f/0x2f [usbcore] [ 188.562142] [<ffffffff8104f8b8>] ? kthread+0x78/0x80 [ 188.562145] [<ffffffff8102df06>] ? get_parent_ip+0x9/0x1b [ 188.562148] [<ffffffff81310000>] ? init_amd+0x112/0x3e4 [ 188.562151] [<ffffffff81322d74>] ? kernel_thread_helper+0x4/0x10 [ 188.562154] [<ffffffff8104f840>] ? __init_kthread_worker+0x41/0x41 [ 188.562156] [<ffffffff81322d70>] ? gs_change+0x13/0x13 [ 188.562161] ---[ end trace 0000000000000002 ]---
Grant
oh steps to reproduce remove logitech headset
Additionally there seems to be an issue with correctly detecting the number of audio channels.
the logitech is only showing up as a mono output device with the new streaming code.
Grant.
Hi Grant et al,
Again sorry for catching up so late on this.
Quoted 7 lines · Grant Diffey
So I've had a chance to do some testing. I can reliably generate then following trace with daniels patch on 3.2-rt10
[ 188.561901] ------------[ cut here ]------------ [ 188.561908] WARNING: at fs/proc/generic.c:586 proc_register+0x181/0x1c7() [ 188.561909] Hardware name: HP Compaq 6910p [ 188.561911] proc_dir_entry 'card1/pcm0p' already registered
There might have been a race condition in the shutdown path which I fixed.
Could you repeat the tests you did some months ago and report whether you still see this issue? I would also appreciate test input from other people. Any kind of USB device is good to track these issues.
Regarding the difference in reported channel numbers, I can't really point my finger to any specific line. It really puzzles me, as my patch set leaves the detection of interfaces and the registration of pcm streams untouched. It would help to know whether there is any difference in the output of "aplay -l" with and without my patches applied.
To test the new set of patches, please start off with a 3.4.0 vanilla kernel and then either
git pull git://github.com/zonque/linux.git usb-audio
or manually apply the combined patch from https://gist.github.com/1168715
I hope to *finally* get this topic finished in this round, but I need the some helpers for testing :)
Daniel
Quoted 75 lines
[ 188.561912] Modules linked in: snd_usb_audio snd_usbmidi_lib
snd_seq_dummyacpi_cpufreqmperfcpufreq_userspacecpufreq_statscpufreq_conservativecpufreq_powersaveppdev lp parport microcodebinfmt_miscuinput fuse nfsd exportfs nfs lockd fscacheauth_rpcgssnfs_aclsunrpc ext2firewire_sbp2loop btusb bluetoothsnd_hda_codec_analogarc4 iwl4965iwl_legacyi915 mac80211uhci_hcdsnd_hda_intelsnd_hda_codecehci_hcddrm_kms_helpersnd_hwdepdrmsnd_pcm_osssnd_mixer_osssnd_pcmsnd_seq_midicfg80211snd_rawmidisnd_seq_midi_eventsnd_sequsbcoresr_modmmc_blocksnd_timertpm_infineonpata_pcmciasnd_seq_devicefirewire_ohcisndsdhci_pcii2c_algo_bitirda cdrom sdhci joydev pcmciatpm_tisata_genericata_piixhp_wmifirewire_corei2c_coreyenta_socketpcmcia_rsrciTCO_wdtmmc_corebatterypcmcia_coresparse_keymapacpower_supplyrfkill pcspkr soundcore tpmtpm_bioswmiiTCO_vendor_supportevdevcrc_itu_tcrc_ccittpsmouse processor container videousb_commonsnd_page_allocserio_rawbutton ext3 jbd mbcachesha256_genericaes_x86_64aes_genericcbcdm_cryptdm_modsd_modcrc_t10difahci libahci libatascsi_modfan thermalthermal_sys[ 188.561979] Pid: 621, comm: khubd Not tainted 3.2.0-rt10-00255-g530565d #5 [ 188.561980] Call Trace: [ 188.561986] [<ffffffff81036273>] ? warn_slowpath_common+0x78/0x8c [ 188.561989] [<ffffffff8103631f>] ? warn_slowpath_fmt+0x45/0x4a [ 188.561993] [<ffffffff8102df06>] ? get_parent_ip+0x9/0x1b [ 188.561995] [<ffffffff81123ac5>] ? proc_register+0x181/0x1c7 [ 188.561997] [<ffffffff81123e2c>] ? create_proc_entry+0x6e/0x85 [ 188.562020] [<ffffffffa0237c18>] ? snd_info_register+0x35/0xbd [snd] [ 188.562026] [<ffffffffa02cdf89>] ? snd_pcm_new_stream+0xd6/0x417 [snd_pcm] [ 188.562031] [<ffffffffa05b69e3>] ? snd_usb_add_audio_stream+0xd5/0x21c [snd_usb_audio] [ 188.562035] [<ffffffffa05b6fd3>] ? snd_usb_parse_audio_interface+0x4a9/0x556 [snd_usb_audio] [ 188.562039] [<ffffffffa05ae276>] ? snd_usb_create_stream+0xed/0x126 [snd_usb_audio] [ 188.562043] [<ffffffffa05aea74>] ? usb_audio_probe+0x61d/0x72d [snd_usb_audio] [ 188.562057] [<ffffffffa028c6e3>] ? usb_probe_interface+0xf8/0x163 [usbcore] [ 188.562062] [<ffffffff812170f1>] ? driver_probe_device+0xa8/0x138 [ 188.562064] [<ffffffff812171f0>] ? __driver_attach+0x6f/0x6f [ 188.562066] [<ffffffff81216120>] ? bus_for_each_drv+0x4a/0x7e [ 188.562069] [<ffffffff81217012>] ? device_attach+0x6f/0x8f [ 188.562071] [<ffffffff8121692c>] ? bus_probe_device+0x1f/0x37 [ 188.562073] [<ffffffff8121520a>] ? device_add+0x3d4/0x577 [ 188.562076] [<ffffffff8102df06>] ? get_parent_ip+0x9/0x1b [ 188.562078] [<ffffffff81030bf0>] ? migrate_enable+0x150/0x16a [ 188.562085] [<ffffffffa028b2b0>] ? usb_set_configuration+0x53f/0x594 [usbcore] [ 188.562088] [<ffffffff811304e6>] ? sysfs_do_create_link+0x149/0x194 [ 188.562094] [<ffffffffa029231a>] ? generic_probe+0x45/0x73 [usbcore] [ 188.562097] [<ffffffff812170f1>] ? driver_probe_device+0xa8/0x138 [ 188.562099] [<ffffffff812171f0>] ? __driver_attach+0x6f/0x6f [ 188.562101] [<ffffffff81216120>] ? bus_for_each_drv+0x4a/0x7e [ 188.562104] [<ffffffff81217012>] ? device_attach+0x6f/0x8f [ 188.562106] [<ffffffff8121692c>] ? bus_probe_device+0x1f/0x37 [ 188.562108] [<ffffffff8121520a>] ? device_add+0x3d4/0x577 [ 188.562110] [<ffffffff81214793>] ? dev_printk+0x48/0x4d [ 188.562116] [<ffffffffa0285188>] ? usb_new_device+0x124/0x198 [usbcore] [ 188.562122] [<ffffffffa02861eb>] ? hub_thread+0x964/0xe54 [usbcore] [ 188.562124] [<ffffffff8102abf4>] ? hrtick_start_fair+0x1a/0x15b [ 188.562127] [<ffffffff8102000a>] ? kern_addr_valid+0x5/0x93 [ 188.562131] [<ffffffff8131adb9>] ? __schedule+0x531/0x548 [ 188.562135] [<ffffffff8104ff82>] ? __init_waitqueue_head+0x39/0x39 [ 188.562140] [<ffffffffa0285887>] ? usb_remote_wakeup+0x2f/0x2f [usbcore] [ 188.562142] [<ffffffff8104f8b8>] ? kthread+0x78/0x80 [ 188.562145] [<ffffffff8102df06>] ? get_parent_ip+0x9/0x1b [ 188.562148] [<ffffffff81310000>] ? init_amd+0x112/0x3e4 [ 188.562151] [<ffffffff81322d74>] ? kernel_thread_helper+0x4/0x10 [ 188.562154] [<ffffffff8104f840>] ? __init_kthread_worker+0x41/0x41 [ 188.562156] [<ffffffff81322d70>] ? gs_change+0x13/0x13 [ 188.562161] ---[ end trace 0000000000000002 ]---Grant
Quoted 36 lines · Daniel Mack
Hi Grant et al,
Again sorry for catching up so late on this.
Quoted 5 lines · Grant Diffey
So I've had a chance to do some testing. I can reliably generate then following trace with daniels patch on 3.2-rt10
[ 188.561901] ------------[ cut here ]------------ [ 188.561908] WARNING: at fs/proc/generic.c:586proc_register+0x181/0x1c7()
Quoted 2 lines
[ 188.561909] Hardware name: HP Compaq 6910p [ 188.561911] proc_dir_entry 'card1/pcm0p' already registeredThere might have been a race condition in the shutdown path which I fixed.
Could you repeat the tests you did some months ago and report whether you still see this issue? I would also appreciate test input from other people. Any kind of USB device is good to track these issues.
Regarding the difference in reported channel numbers, I can't really point my finger to any specific line. It really puzzles me, as my patch set leaves the detection of interfaces and the registration of pcm streams untouched. It would help to know whether there is any difference in the output of "aplay -l" with and without my patches applied.
To test the new set of patches, please start off with a 3.4.0 vanilla kernel and then either
git pull
git://github.com/zonque/linux.gitusb-audioor manually apply the combined patch from https://gist.github.com/1168715
Quoted 8 lines
I hope to *finally* get this topic finished in this round, but I need the some helpers for testing :)
Daniel
So this seems to be good it solves the clicking problem for me generating sine wave's
I need to do some further testing. which is unlikely to happen this morning.
Grant.
Quoted 11 lines · Felix Homann
Happy New Year!
That being said, I've tested a kernel without Daniel's patch set. It doesn't work either. The error messages are only slightly different:
Jan 1 11:52:31 weasel mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1" Jan 1 11:52:31 weasel mtp-probe: bus: 1, device: 4 was not an MTP device Jan 1 11:52:31 weasel kernel: [ 161.880773] usbcore: registered new interface driver snd-usb-audio Jan 1 11:52:34 weasel kernel: [ 164.284980] cannot submit datapipe
Quoted 5 lines
for urb 0, error -28: not enough bandwidth
So, It's not related to Daniel's rework. But nevertheless, something's broken...
are you sure it's connected to an EHCI (usb2) controller?
Grant.
Hi,
this time I can get the device to work. It produces clickless playback at higher latencies. But trying to run JACK @44.1kHz with 128 frames/period (i.e. -p 128) I can reliably reproduce a kernel oops which either completely freezes my system or at least blocks keyboard an mouse. Here it is:
Apr 10 20:25:43 weasel kernel: [ 164.243214] usbcore: registered new interface driver snd-usb-audio Apr 10 20:27:00 weasel kernel: [ 240.453704] BUG: unable to handle kernel paging request at 00100104 Apr 10 20:27:00 weasel kernel: [ 240.457673] IP: [<f90a7409>] queue_pending_output_urbs+0x89/0x130 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] *pde = 00000000 Apr 10 20:27:00 weasel kernel: [ 240.457673] Oops: 0002 [#1] SMP Apr 10 20:27:00 weasel kernel: [ 240.457673] Modules linked in:
snd_usb_audio snd_usbmidi_lib snd_seq_dummy rfcomm bnep parport_pc dm_crypt ppdev binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq joydev coretemp snd_timer snd_seq_devi
ce uvcvideo hid_multitouch videobuf2_core snd microcode videodev videobuf2_vmalloc videobuf2_memops btusb soundcore bluetooth snd_page_alloc psmouse serio_raw lp parpor
t usbhid hid atl1c ahci libahci i915 drm_kms_helper drm wmi i2c_algo_bit video
Apr 10 20:27:00 weasel kernel: [ 240.457673] Apr 10 20:27:00 weasel kernel: [ 240.457673] Pid: 0, comm: swapper/0 Not tainted 3.4.0-rc2-daniel+ #2 Acer Aspire 1420P/JM12-MS Apr 10 20:27:00 weasel kernel: [ 240.457673] EIP: 0060:[<f90a7409>] EFLAGS: 00010002 CPU: 0 Apr 10 20:27:00 weasel kernel: [ 240.457673] EIP is at queue_pending_output_urbs+0x89/0x130 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] EAX: 00200200 EBX: edb08000 ECX: edb097ac EDX: edb08028 Apr 10 20:27:00 weasel kernel: [ 240.457673] ESI: edb082c0 EDI: 00100100 EBP: f380be64 ESP: f380be3c Apr 10 20:27:00 weasel kernel: [ 240.457673] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Apr 10 20:27:00 weasel kernel: [ 240.457673] CR0: 8005003b CR2: 00100104 CR3: 018af000 CR4: 000407d0 Apr 10 20:27:00 weasel kernel: [ 240.457673] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 Apr 10 20:27:00 weasel kernel: [ 240.457673] DR6: ffff0ff0 DR7: 00000400 Apr 10 20:27:00 weasel kernel: [ 240.457673] Process swapper/0 (pid: 0, ti=f380a000 task=c1794020 task.ti=c1788000) Apr 10 20:27:00 weasel kernel: [ 240.457673] Stack: Apr 10 20:27:00 weasel kernel: [ 240.457673] f380be44 f380be4c c105dfd2 f380be50 00000096 edb0a9b4 edb0a950 edeb5f08 Apr 10 20:27:00 weasel kernel: [ 240.457673] edb0c2c8 edb097ac f380be94 f90a86bf edb0c2c8 f7007300 f7007300 edeb5e00 Apr 10 20:27:00 weasel kernel: [ 240.457673] 00000092 edb0a9b4 edb08000 edb0c000 edb0c2c8 edeb5e00 f380beb8 f90a882d Apr 10 20:27:00 weasel kernel: [ 240.457673] Call Trace: Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c105dfd2>] ? resched_task+0x22/0x70 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<f90a86bf>] snd_usb_handle_sync_urb+0x1ef/0x260 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] [<f90a882d>] snd_complete_urb+0xfd/0x200 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13dec0d>] usb_hcd_giveback_urb+0x4d/0xc0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1551f6d>] ? _raw_spin_lock+0xd/0x10 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13f3571>] ehci_urb_done+0xc1/0xf0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13f4afc>] ehci_work+0x8ec/0xa10 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13f4ea1>] ehci_irq+0x221/0x250 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1080cb3>] ? tick_do_periodic_broadcast+0x33/0x40 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13de3b2>]
usb_hcd_irq+0x32/0x50
Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10ad52c>] handle_irq_event_percpu+0x4c/0x210 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c155219d>] ? _raw_spin_lock_irqsave+0x2d/0x40 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10ad72b>] handle_irq_event+0x3b/0x60 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10aff20>] ? unmask_irq+0x30/0x30 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10aff6e>] handle_fasteoi_irq+0x4e/0xd0 Apr 10 20:27:00 weasel kernel: [ 240.457673] <IRQ> Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1559432>] ? do_IRQ+0x42/0xc0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10084f8>] ? sched_clock+0x8/0x10 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1062e8b>] ? sched_clock_local+0xcb/0x1c0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1559370>] ? common_interrupt+0x30/0x38 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10600d8>] ? rt_mutex_setprio+0x98/0x200 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c131b5d6>] ? arch_local_irq_enable+0x5/0xb Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c131c30f>] ? acpi_idle_enter_bm+0x228/0x268 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c143b785>] ? cpuidle_enter+0x15/0x20 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c143bd1c>] ? cpuidle_idle_call+0x9c/0x260 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c100a10a>] ? cpu_idle+0xaa/0xe0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c152e135>] ? rest_init+0x5d/0x68 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c17f976c>] ? start_kernel+0x367/0x36d Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c17f9186>] ? loglevel+0x2b/0x2b Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c17f9078>] ? i386_start_kernel+0x78/0x7d Apr 10 20:27:00 weasel kernel: [ 240.457673] Code: 00 83 c0 01 8d 8c 13 28 15 00 00 89 c2 c1 fa 1f c1 ea 1d 01 d0 83 e0 07 29 d0 89 83 48 29 00 00 8b 46 04 8d 96 68 fd ff ff 8b 3e <89> 47 04 89 38 c7 06 00 01 10 00 c7 46 04 00 02 20 00 8b 81 80 Apr 10 20:27:00 weasel kernel: [ 240.457673] EIP: [<f90a7409>] queue_pending_output_urbs+0x89/0x130 [snd_usb_audio] SS:ESP 0068:f380be3c Apr 10 20:27:00 weasel kernel: [ 240.457673] CR2: 0000000000100104
After this messageand only ahter this oops I'm getting lots of ACPI errors:
Apr 10 20:27:06 weasel kernel: [ 247.021871] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20120320/evregion-501) Apr 10 20:27:06 weasel kernel: [ 247.024423] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node f382b2d0), AE_TIME (20120320/psparse-536) Apr 10 20:27:06 weasel kernel: [ 247.025805] ACPI Exception: AE_TIME, Evaluating _BST (20120320/battery-455) Apr 10 20:27:07 weasel kernel: [ 248.178058] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20120320/evregion-501) Apr 10 20:27:07 weasel kernel: [ 248.180657] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node f382b2d0), AE_TIME (20120320/psparse-536) Apr 10 20:27:07 weasel kernel: [ 248.182039] ACPI Exception: AE_TIME,
Evaluating _BST (20120320/battery-455)
Any ideas?
Regards,
Felix
Hi,
Quoted 5 lines · Felix Homann
this time I can get the device to work. It produces clickless playback at higher latencies. But trying to run JACK @44.1kHz with 128 frames/period (i.e. -p 128) I can reliably reproduce a kernel oops which either completely freezes my system or at least blocks keyboard an mouse. Here it is:
Good catch, thanks! I was able to trigger that one too, and fixed it. Just refreshed my tree and the combined patch (gist). Could you give it another shot?
Thanks,
Daniel
Quoted 136 lines
Apr 10 20:25:43 weasel kernel: [ 164.243214] usbcore: registered new interface driver snd-usb-audio Apr 10 20:27:00 weasel kernel: [ 240.453704] BUG: unable to handle kernel paging request at 00100104 Apr 10 20:27:00 weasel kernel: [ 240.457673] IP: [<f90a7409>] queue_pending_output_urbs+0x89/0x130 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] *pde = 00000000 Apr 10 20:27:00 weasel kernel: [ 240.457673] Oops: 0002 [#1] SMP Apr 10 20:27:00 weasel kernel: [ 240.457673] Modules linked in:
snd_usb_audiosnd_usbmidi_libsnd_seq_dummyrfcomm bnepparport_pcdm_cryptppdevbinfmt_miscsnd_hda_codec_hdmisnd_hda_codec_realteksnd_hda_intelsnd_hda_codecsnd_hwdepsnd_pcmsnd_seq_midisnd_rawmidisnd_seq_midi_eventsnd_seqjoydev coretempsnd_timersnd_seq_devi
ce uvcvideohid_multitouchvideobuf2_coresnd microcode videodevvideobuf2_vmallocvideobuf2_memopsbtusb soundcore bluetoothsnd_page_allocpsmouseserio_rawlp parpor
t usbhid hid atl1c ahci libahci i915drm_kms_helperdrm wmii2c_algo_bitvideoApr 10 20:27:00 weasel kernel: [ 240.457673] Apr 10 20:27:00 weasel kernel: [ 240.457673] Pid: 0, comm: swapper/0 Not tainted 3.4.0-rc2-daniel+ #2 Acer Aspire 1420P/JM12-MS Apr 10 20:27:00 weasel kernel: [ 240.457673] EIP: 0060:[<f90a7409>] EFLAGS: 00010002 CPU: 0 Apr 10 20:27:00 weasel kernel: [ 240.457673] EIP is at queue_pending_output_urbs+0x89/0x130 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] EAX: 00200200 EBX: edb08000 ECX: edb097ac EDX: edb08028 Apr 10 20:27:00 weasel kernel: [ 240.457673] ESI: edb082c0 EDI: 00100100 EBP: f380be64 ESP: f380be3c Apr 10 20:27:00 weasel kernel: [ 240.457673] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Apr 10 20:27:00 weasel kernel: [ 240.457673] CR0: 8005003b CR2: 00100104 CR3: 018af000 CR4: 000407d0 Apr 10 20:27:00 weasel kernel: [ 240.457673] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 Apr 10 20:27:00 weasel kernel: [ 240.457673] DR6: ffff0ff0 DR7: 00000400 Apr 10 20:27:00 weasel kernel: [ 240.457673] Process swapper/0 (pid: 0, ti=f380a000 task=c1794020 task.ti=c1788000) Apr 10 20:27:00 weasel kernel: [ 240.457673] Stack: Apr 10 20:27:00 weasel kernel: [ 240.457673] f380be44 f380be4c c105dfd2 f380be50 00000096 edb0a9b4 edb0a950 edeb5f08 Apr 10 20:27:00 weasel kernel: [ 240.457673] edb0c2c8 edb097ac f380be94 f90a86bf edb0c2c8 f7007300 f7007300 edeb5e00 Apr 10 20:27:00 weasel kernel: [ 240.457673] 00000092 edb0a9b4 edb08000 edb0c000 edb0c2c8 edeb5e00 f380beb8 f90a882d Apr 10 20:27:00 weasel kernel: [ 240.457673] Call Trace: Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c105dfd2>] ? resched_task+0x22/0x70 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<f90a86bf>] snd_usb_handle_sync_urb+0x1ef/0x260 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] [<f90a882d>] snd_complete_urb+0xfd/0x200 [snd_usb_audio] Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13dec0d>] usb_hcd_giveback_urb+0x4d/0xc0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1551f6d>] ? _raw_spin_lock+0xd/0x10 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13f3571>] ehci_urb_done+0xc1/0xf0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13f4afc>] ehci_work+0x8ec/0xa10 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13f4ea1>] ehci_irq+0x221/0x250 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1080cb3>] ? tick_do_periodic_broadcast+0x33/0x40 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c13de3b2>]
usb_hcd_irq+0x32/0x50Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10ad52c>] handle_irq_event_percpu+0x4c/0x210 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c155219d>] ? _raw_spin_lock_irqsave+0x2d/0x40 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10ad72b>] handle_irq_event+0x3b/0x60 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10aff20>] ? unmask_irq+0x30/0x30 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10aff6e>] handle_fasteoi_irq+0x4e/0xd0 Apr 10 20:27:00 weasel kernel: [ 240.457673] <IRQ> Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1559432>] ? do_IRQ+0x42/0xc0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10084f8>] ? sched_clock+0x8/0x10 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1062e8b>] ? sched_clock_local+0xcb/0x1c0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c1559370>] ? common_interrupt+0x30/0x38 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c10600d8>] ? rt_mutex_setprio+0x98/0x200 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c131b5d6>] ? arch_local_irq_enable+0x5/0xb Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c131c30f>] ? acpi_idle_enter_bm+0x228/0x268 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c143b785>] ? cpuidle_enter+0x15/0x20 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c143bd1c>] ? cpuidle_idle_call+0x9c/0x260 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c100a10a>] ? cpu_idle+0xaa/0xe0 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c152e135>] ? rest_init+0x5d/0x68 Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c17f976c>] ? start_kernel+0x367/0x36d Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c17f9186>] ? loglevel+0x2b/0x2b Apr 10 20:27:00 weasel kernel: [ 240.457673] [<c17f9078>] ? i386_start_kernel+0x78/0x7d Apr 10 20:27:00 weasel kernel: [ 240.457673] Code: 00 83 c0 01 8d 8c 13 28 15 00 00 89 c2 c1 fa 1f c1 ea 1d 01 d0 83 e0 07 29 d0 89 83 48 29 00 00 8b 46 04 8d 96 68 fd ff ff 8b 3e <89> 47 04 89 38 c7 06 00 01 10 00 c7 46 04 00 02 20 00 8b 81 80 Apr 10 20:27:00 weasel kernel: [ 240.457673] EIP: [<f90a7409>] queue_pending_output_urbs+0x89/0x130 [snd_usb_audio] SS:ESP 0068:f380be3c Apr 10 20:27:00 weasel kernel: [ 240.457673] CR2: 0000000000100104After this messageand only ahter this oops I'm getting lots of ACPI errors:
Apr 10 20:27:06 weasel kernel: [ 247.021871] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20120320/evregion-501) Apr 10 20:27:06 weasel kernel: [ 247.024423] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node f382b2d0), AE_TIME (20120320/psparse-536) Apr 10 20:27:06 weasel kernel: [ 247.025805] ACPI Exception: AE_TIME, Evaluating _BST (20120320/battery-455) Apr 10 20:27:07 weasel kernel: [ 248.178058] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20120320/evregion-501) Apr 10 20:27:07 weasel kernel: [ 248.180657] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node f382b2d0), AE_TIME (20120320/psparse-536) Apr 10 20:27:07 weasel kernel: [ 248.182039] ACPI Exception: AE_TIME,Evaluating
_BST(20120320/battery-455)Any ideas?
Regards,
Felix
Hi,
2012/4/11 Daniel Mack <[email protected]>:
Quoted 2 lines
Just refreshed my tree and the combined patch (gist). Could you give it another shot?
I've just tested the new version and have not found any issues. Great work! Thank you very much!
BTW, didn't you have a patch for switching to an external clock source on the FTUs? Maybe it would be useful for me to clean up the dirty hack I've got somewhere for the effects controls. (Don't hurry, it will take me a couple of weeks anyway due to time constraints)
Regards,
Felix
Quoted 8 lines · Felix Homann
Hi,
2012/4/11 Daniel Mack <[email protected]>:
Quoted 2 lines
Just refreshed my tree and the combined patch (gist). Could you give it another shot?
I've just tested the new version and have not found any issues. Great work! Thank you very much!
Good news indeed. As Grant is also signalling green light, I'll post version 7 of the patch series now.
Quoted 4 lines
BTW, didn't you have a patch for switching to an external clock source on the FTUs? Maybe it would be useful for me to clean up the dirty hack I've got somewhere for the effects controls. (Don't hurry, it will take me a couple of weeks anyway due to time constraints)
Can't find it right now. But that should be comparatively easy to do in a subsequent patch.
Thanks,
Daniel