ASoC: Make WM8993 I2C usage unconditional
Subsystems (3)
PATCH 1/1 ASoC: Make WM8993 I2C usage unconditional
The WM8993 only supports I2C so don't ifdef the I2C support in the driver.
Signed-off-by Mark Brown <[email protected]>
--- sound/soc/codecs/wm8993.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-)
sound/soc/codecs/wm8993.c +0 -6
@@ -1654,7 +1654,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8993 = { .set_bias_level = wm8993_set_bias_level, }; -#if defined(CONFIG_I2C ) || defined(CONFIG_I2C_MODULE )static __devinit int wm8993_i2c_probe (struct i2c_client *i2c,const struct i2c_device_id *id) {
@@ -1758,27 +1757,22 @@ static struct i2c_driver wm8993_i2c_driver = { .remove = __devexit_p(wm8993_i2c_remove), .id_table = wm8993_i2c_id, }; -#endif static int __init wm8993_modinit (void ) {int ret =0 ; -#if defined(CONFIG_I2C ) || defined(CONFIG_I2C_MODULE ) ret =i2c_add_driver (&wm8993_i2c_driver);if (ret !=0 ) {pr_err ("WM8993: Unable to register I2C driver: %d\n" , ret); } -#endif return ret; }module_init (wm8993_modinit); static void __exit wm8993_exit(void) { -#if defined(CONFIG_I2C ) || defined(CONFIG_I2C_MODULE )i2c_del_driver (&wm8993_i2c_driver); -#endif }module_exit (wm8993_exit);
Signature · 1 line
1.7.7.3