ASoC: wm8993: Convert to use a regmap patch
Subsystems (3)
PATCH 1/1 ASoC: wm8993: Convert to use a regmap patch
Signed-off-by Mark Brown <[email protected]>
--- sound/soc/codecs/wm8993.c | 18 +++++++++++++----- 1 files changed, 13 insertions(+), 5 deletions(-)
sound/soc/codecs/wm8993.c +13 -5
@@ -1077,11 +1077,6 @@ static int wm8993_set_bias_level(struct snd_soc_codec *codec,regcache_cache_only (wm8993->regmap, false);regcache_sync (wm8993->regmap); -/* Tune DC servo configuration */ -snd_soc_write (codec,0x44 ,3 ); -snd_soc_write (codec,0x56 ,3 ); -snd_soc_write (codec,0x44 ,0 ); -/* Bring up VMID with fast soft start */ snd_soc_update_bits(codec, WM8993_ANTIPOP2, WM8993_STARTUP_BIAS_ENA |
@@ -1691,6 +1686,13 @@ static int wm8993_resume(struct snd_soc_codec *codec)#define wm8993_resume NULL#endif +/* Tune DC servo configuration */ +static struct reg_default wm8993_regmap_patch[] = { + {0x44 ,3 }, + {0x56 ,3 }, + {0x44 ,0 }, +}; +static const struct regmap_config wm8993_regmap = { .reg_bits =8 , .val_bits =16 ,
@@ -1769,6 +1771,12 @@ static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,if (ret !=0 ) goto err_enable; + ret =regmap_register_patch (wm8993->regmap, wm8993_regmap_patch, +ARRAY_SIZE (wm8993_regmap_patch)); +if (ret !=0 ) +dev_warn (wm8993->dev,"Failed to apply regmap patch: %d\n" , + ret); +if (i2c->irq) {/* Put GPIO1 into interrupt mode (only GPIO1 can output IRQ) */ ret = regmap_update_bits(wm8993->regmap, WM8993_GPIO1,
Signature · 1 line
1.7.9.rc1