sound/pci/hda: clean up CX20549 test mixer setup

index 3ab7b25..801e8f2 100644
@@ -931,10 +931,10 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = {
 	/* Output controls */
 	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Node 11 Playback Volume", 0x11, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Node 11 Playback Switch", 0x11, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Node 12 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Node 12 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("HP-OUT Playback Volume", 0x11, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("HP-OUT Playback Switch", 0x11, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("LINE1 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
 	
 	/* Modes for retasking pin widgets */
 	CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT),

@@ -945,16 +945,16 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = {
 
 	/* Loopback mixer controls */
 
-	HDA_CODEC_VOLUME("Mixer-1 Volume", 0x17, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mixer-1 Switch", 0x17, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mixer-2 Volume", 0x17, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("Mixer-2 Switch", 0x17, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mixer-3 Volume", 0x17, 0x2, HDA_INPUT),
-	HDA_CODEC_MUTE("Mixer-3 Switch", 0x17, 0x2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mixer-4 Volume", 0x17, 0x3, HDA_INPUT),
-	HDA_CODEC_MUTE("Mixer-4 Switch", 0x17, 0x3, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mixer-5 Volume", 0x17, 0x4, HDA_INPUT),
-	HDA_CODEC_MUTE("Mixer-5 Switch", 0x17, 0x4, HDA_INPUT),
+	HDA_CODEC_VOLUME("PCM Volume", 0x17, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("PCM Switch", 0x17, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("MIC1 pin Volume", 0x17, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("MIC1 pin Switch", 0x17, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("LINE1 pin Volume", 0x17, 0x2, HDA_INPUT),
+	HDA_CODEC_MUTE("LINE1 pin Switch", 0x17, 0x2, HDA_INPUT),
+	HDA_CODEC_VOLUME("HP-OUT pin Volume", 0x17, 0x3, HDA_INPUT),
+	HDA_CODEC_MUTE("HP-OUT pin Switch", 0x17, 0x3, HDA_INPUT),
+	HDA_CODEC_VOLUME("CD pin Volume", 0x17, 0x4, HDA_INPUT),
+	HDA_CODEC_MUTE("CD pin Switch", 0x17, 0x4, HDA_INPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		.name = "Input Source",

@@ -986,10 +986,6 @@ static const struct hda_verb cxt5045_test_init_verbs[] = {
 	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 	{0x18, AC_VERB_SET_DIGI_CONVERT_1, 0},
 
-	/* Start with output sum widgets muted and their output gains at min */
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
 	/* Unmute retasking pin widget output buffers since the default
 	 * state appears to be output.  As the pin mode is changed by the
 	 * user the pin mode control will take care of enabling the pin's

@@ -1004,11 +1000,11 @@ static const struct hda_verb cxt5045_test_init_verbs[] = {
 	/* Set ADC connection select to match default mixer setting (mic1
 	 * pin)
 	 */
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x17, AC_VERB_SET_CONNECT_SEL, 0x01},
 
 	/* Mute all inputs to mixer widget (even unconnected ones) */
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer pin */
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer */
 	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Mic1 pin */
 	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* Line pin */
 	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* HP pin */