regulator: wm831x-ldo: Convert to regulator_set_voltage_sel_regmap and map_voltage

PATCH Applied Axel Lin 2 participants 2 messages Jun 12, 2012 – Jun 17, 2012

Subsystems (2)

Voltage and current regulator framework Wolfson microelectronics drivers

lore

Share & tools

lore

Axel Lin

author

2012-06-12 02:46 UTC #0 lore raw

PATCH 1/1 regulator: wm831x-ldo: Convert to regulator_set_voltage_sel_regmap and map_voltage

Signed-off-by Axel Lin <[email protected]>

---
 drivers/regulator/wm831x-ldo.c |  129 ++++++++++++----------------------------
 1 file changed, 38 insertions(+), 91 deletions(-)

drivers/regulator/wm831x-ldo.c +38 ~~-91~~

index f23d020e9..04d8a41 100644
@@ -78,13 +78,10 @@ static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
 	return -EINVAL;
 }
 
-static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
-					 int min_uV, int max_uV,
-					 unsigned *selector)
+static int wm831x_gp_ldo_map_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
 {
-	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	struct wm831x *wm831x = ldo->wm831x;
-	int vsel, ret;
+	int volt, vsel;
 
 	if (min_uV < 900000)
 		vsel = 0;

@@ -94,36 +91,25 @@ static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
 		vsel = ((min_uV - 1700000) / 100000)
 			+ WM831X_GP_LDO_SELECTOR_LOW + 1;
 
-	ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
-	if (ret < 0)
-		return ret;
-	if (ret < min_uV || ret > max_uV)
+	volt = wm831x_gp_ldo_list_voltage(rdev, vsel);
+	if (volt < min_uV || volt > max_uV)
 		return -EINVAL;
 
-	*selector = vsel;
-
-	return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
-				     int min_uV, int max_uV,
-				     unsigned *selector)
-{
-	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
-
-	return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
-					     selector);
+	return vsel;
 }
 
 static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
 					     int uV)
 {
 	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
-	unsigned int selector;
+	struct wm831x *wm831x = ldo->wm831x;
+	int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
 
-	return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+	sel = wm831x_gp_ldo_map_voltage(rdev, uV, uV);
+	if (sel < 0)
+		return sel;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, sel);
 }
 
 static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)

@@ -243,8 +229,9 @@ static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
 
 static struct regulator_ops wm831x_gp_ldo_ops = {
 	.list_voltage = wm831x_gp_ldo_list_voltage,
+	.map_voltage = wm831x_gp_ldo_map_voltage,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage = wm831x_gp_ldo_set_voltage,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
 	.get_mode = wm831x_gp_ldo_get_mode,
 	.set_mode = wm831x_gp_ldo_set_mode,

@@ -384,13 +371,10 @@ static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
 	return -EINVAL;
 }
 
-static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
-				       int min_uV, int max_uV,
-				       unsigned *selector)
+static int wm831x_aldo_map_voltage(struct regulator_dev *rdev,
+				   int min_uV, int max_uV)
 {
-	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	struct wm831x *wm831x = ldo->wm831x;
-	int vsel, ret;
+	int volt, vsel;
 
 	if (min_uV < 1000000)
 		vsel = 0;

@@ -400,35 +384,26 @@ static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
 		vsel = ((min_uV - 1700000) / 100000)
 			+ WM831X_ALDO_SELECTOR_LOW + 1;
 
-	ret = wm831x_aldo_list_voltage(rdev, vsel);
-	if (ret < 0)
-		return ret;
-	if (ret < min_uV || ret > max_uV)
+	volt = wm831x_aldo_list_voltage(rdev, vsel);
+	if (volt < min_uV || volt > max_uV)
 		return -EINVAL;
 
-	*selector = vsel;
-
-	return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
-				   int min_uV, int max_uV, unsigned *selector)
-{
-	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	return vsel;
 
-	return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV,
-					   selector);
 }
 
 static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
 					     int uV)
 {
 	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
-	unsigned int selector;
+	struct wm831x *wm831x = ldo->wm831x;
+	int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+	sel = wm831x_aldo_map_voltage(rdev, uV, uV);
+	if (sel < 0)
+		return sel;
 
-	return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, sel);
 }
 
 static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)

@@ -506,8 +481,9 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev)
 
 static struct regulator_ops wm831x_aldo_ops = {
 	.list_voltage = wm831x_aldo_list_voltage,
+	.map_voltage = wm831x_aldo_map_voltage,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage = wm831x_aldo_set_voltage,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
 	.get_mode = wm831x_aldo_get_mode,
 	.set_mode = wm831x_aldo_set_mode,

@@ -628,47 +604,18 @@ static struct platform_driver wm831x_aldo_driver = {
 
 #define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
 
-static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
-					    int reg,
-					    int min_uV, int max_uV,
-					    unsigned *selector)
-{
-	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	struct wm831x *wm831x = ldo->wm831x;
-	int vsel, ret;
-
-	vsel = (min_uV - 800000) / 50000;
-
-	ret = regulator_list_voltage_linear(rdev, vsel);
-	if (ret < 0)
-		return ret;
-	if (ret < min_uV || ret > max_uV)
-		return -EINVAL;
-
-	*selector = vsel;
-
-	return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
-}
-
-static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
-					int min_uV, int max_uV,
-					unsigned *selector)
-{
-	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
-
-	return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
-						selector);
-}
-
 static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
 					     int uV)
 {
 	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
-	int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
-	unsigned selector;
+	struct wm831x *wm831x = ldo->wm831x;
+	int sel, reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
+
+	sel = regulator_map_voltage_linear(rdev, uV, uV);
+	if (sel < 0)
+		return sel;
 
-	return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, sel);
 }
 
 static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)

@@ -692,7 +639,7 @@ static struct regulator_ops wm831x_alive_ldo_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage = wm831x_alive_ldo_set_voltage,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
 	.get_status = wm831x_alive_ldo_get_status,

Signature · 1 line

1.7.9.5

Mark Brown

Applied

2012-06-17 20:07 UTC #1 lore raw

Quoted 1 line · Axel Lin

Signed-off-by Axel Lin <[email protected]>

Applied, thanks.