Skip to contentSkip to conversation

Subject: [PATCH 1/1] XSELinux: When SELinux is enabled the xserver seg faults

PATCH Richard Haines 2 participants 2 messages Jun 12, 2012 – Jun 13, 2012 SELinux security module

lore
Share & tools
lore
#0 lore raw

This patch was created using xorg-server-1.12.0 source.

When using Fedora 17 with xorg-server-1.12.0 and SELinux is enabled ('setsebool xserver_object_manager on') the xserver will not load. The X log file has a seg fault pointing to XACE/SELinux. Bug 50641 was raised
(https://bugs.freedesktop.org/show_bug.cgi?id=50641). The patch below is a possible fix.

The bug is caused by X calling XaceHook(XACE_DEVICE_ACCESS, client, ...) with a device ID of '1' that is XIAllMasterDevices. It would also happen if the device ID = 0 (XIAllDevices).

The only places currently seen calling with a device id=1 are:
GrabKey - in Xi/exevents.c and AddPassiveGrabToList - in dix/grabs.c These start life in ProcXIPassiveGrabDevice (in Xi/xipassivegrab.c) that has been called by XIGrabKeycode.

The patch has been tested using the other XI calls that would also impact
this: XIGrabTouchBegin, XIGrabButton, XIGrabFocusIn and XIGrabEnter with and without the correct permissions (grab and freeze) with no problems.

Both possible classes have to be checked (x_keyboard and x_pointer) as it is not known whether it is a pointer or keyboard as this info is not available. To get this info would require a change to the XaceHook(XACE_DEVICE_ACCESS, client, ..) call to pass an additional parameter stating the actual devices (that would defeat the objective of the XIAllMasterDevices and XIAllDevices dev ids).

Note that there are other devices apart from the keyboard and pointer, for example on the test system: DeviceID: 9 is the Integrated_Webcam_1.3M. As it is classed as a slave keyboard it is checked.

---
 Xext/xselinux_hooks.c |   44 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)
Xext/xselinux_hooks.c +39 -5
index 0d4c9ab..c2b21d6 100644
@@ -336,9 +336,17 @@ SELinuxDevice(CallbackListPtr *pcbl, pointer unused, pointer calldata)
     SELinuxAuditRec auditdata = { .client = rec->client, .dev = rec->dev };
     security_class_t cls;
     int rc;
+    DeviceIntPtr dev = NULL;
+    int i = 0;
 
     subj = dixLookupPrivate(&rec->client->devPrivates, subjectKey);
-    obj = dixLookupPrivate(&rec->dev->devPrivates, objectKey);
+	/*
+	 * The XIAllMasterDevices or XIAllDevices do not have devPrivates
+	 * entries. Therefore dixLookupPrivate for the object is done later
+	 * for these device IDs.
+	 */
+	if (rec->dev->id != XIAllDevices && rec->dev->id != XIAllMasterDevices)
+    	obj = dixLookupPrivate(&rec->dev->devPrivates, objectKey);
 
     /* If this is a new object that needs labeling, do it now */
     if (rec->access_mode & DixCreateAccess) {
@@ -356,12 +364,38 @@ SELinuxDevice(CallbackListPtr *pcbl, pointer unused, pointer calldata)
 	}
     }
 
-    cls = IsPointerDevice(rec->dev) ? SECCLASS_X_POINTER : SECCLASS_X_KEYBOARD;
-    rc = SELinuxDoCheck(subj, obj, cls, rec->access_mode, &auditdata);
-    if (rc != Success)
-	rec->status = rc;
+	if (rec->dev->id != XIAllDevices && rec->dev->id != XIAllMasterDevices) {
+   		cls = IsPointerDevice(rec->dev) ? SECCLASS_X_POINTER : SECCLASS_X_KEYBOARD;
+	   	rc = SELinuxDoCheck(subj, obj, cls, rec->access_mode, &auditdata);
+   		if (rc != Success)
+			rec->status = rc;
+		return;
+	} else {
+		/*
+		 * Device ID must be 0 or 1
+		 * We have to check both possible classes as we don't know whether it
+		 * was a pointer or keyboard. Therefore all devices are checked for:
+		 * 		rec->dev->id == XIAllDevices
+		 * and only masters for:
+		 *		 rec->dev->id == XIAllMasterDevices
+		 *
+		 * An error is returned should any device fail SELinuxDoCheck
+		 */
+		for (dev = inputInfo.devices; dev; dev = dev->next, i++) {
+			if (!IsMaster(dev) && rec->dev->id == XIAllMasterDevices)
+				continue;
+  			cls = IsPointerDevice(dev) ? SECCLASS_X_POINTER : SECCLASS_X_KEYBOARD;
+			obj = dixLookupPrivate(&dev->devPrivates, objectKey);
+		    rc = SELinuxDoCheck(subj, obj, cls, rec->access_mode, &auditdata);
+		    if (rc != Success) {
+				rec->status = rc;
+				return;
+			}
+		}
+	}
 }
 
+
 static void
 SELinuxSend(CallbackListPtr *pcbl, pointer unused, pointer calldata)
 {
Signature · 8 lines
1.7.10.2



--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
Acked-by
#1 lore raw

Hi,

Looks good to me, although I thought this was handled at the callsites. I guess some callsites have been added or changed that pass in the special ID's.

Quoted 125 lines · Richard Haines

This patch was created using xorg-server-1.12.0 source.

When using Fedora 17 with xorg-server-1.12.0 and SELinux is enabled ('setsebool xserver_object_manager on') the xserver will not load. The X log file has a seg fault pointing to XACE/SELinux. Bug 50641 was raised
(https://bugs.freedesktop.org/show_bug.cgi?id=50641). The patch below is a possible fix.

The bug is caused by X calling XaceHook(XACE_DEVICE_ACCESS, client, ...) with a device ID of '1' that is XIAllMasterDevices. It would also happen if the device ID = 0 (XIAllDevices).

The only places currently seen calling with a device id=1 are:
GrabKey - in Xi/exevents.c and AddPassiveGrabToList - in dix/grabs.c These start life in ProcXIPassiveGrabDevice (in Xi/xipassivegrab.c) that has been called by XIGrabKeycode.

The patch has been tested using the other XI calls that would also impact
this: XIGrabTouchBegin, XIGrabButton, XIGrabFocusIn and XIGrabEnter with and without the correct permissions (grab and freeze) with no problems.

Both possible classes have to be checked (x_keyboard and x_pointer) as it is not known whether it is a pointer or keyboard as this info is not available. To get this info would require a change to the XaceHook(XACE_DEVICE_ACCESS, client, ..) call to pass an additional parameter stating the actual devices (that would defeat the objective of the XIAllMasterDevices and XIAllDevices dev ids).

Note that there are other devices apart from the keyboard and pointer, for example on the test system: DeviceID: 9 is the Integrated_Webcam_1.3M. As it is classed as a slave keyboard it is checked.

---
 Xext/xselinux_hooks.c |   44 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)
Xext/xselinux_hooks.c +9 -1
index 0d4c9ab..c2b21d6 100644
@@ -336,9 +336,17 @@ SELinuxDevice(CallbackListPtr *pcbl, pointer unused,
 pointer calldata)
    SELinuxAuditRec auditdata = { .client = rec->client, .dev = rec->dev };
    security_class_t cls;
    int rc;
+    DeviceIntPtr dev = NULL;
+    int i = 0;
 
    subj = dixLookupPrivate(&rec->client->devPrivates, subjectKey);
-    obj = dixLookupPrivate(&rec->dev->devPrivates, objectKey);
+       /*
+        * The XIAllMasterDevices or XIAllDevices do not have devPrivates
+        * entries. Therefore dixLookupPrivate for the object is done later
+        * for these device IDs.
+        */
+       if (rec->dev->id != XIAllDevices && rec->dev->id !=
 XIAllMasterDevices)
+       obj = dixLookupPrivate(&rec->dev->devPrivates, objectKey);
 
    /* If this is a new object that needs labeling, do it now */
    if (rec->access_mode & DixCreateAccess) {
Xext/xselinux_hooks.c +10 -4
@@ -356,12 +364,38 @@ SELinuxDevice(CallbackListPtr *pcbl, pointer unused,
 pointer calldata)
       }
    }
 
-    cls = IsPointerDevice(rec->dev) ? SECCLASS_X_POINTER :
 SECCLASS_X_KEYBOARD;
-    rc = SELinuxDoCheck(subj, obj, cls, rec->access_mode, &auditdata);
-    if (rc != Success)
-       rec->status = rc;
+       if (rec->dev->id != XIAllDevices && rec->dev->id !=
 XIAllMasterDevices) {
+               cls = IsPointerDevice(rec->dev) ? SECCLASS_X_POINTER :
 SECCLASS_X_KEYBOARD;
+               rc = SELinuxDoCheck(subj, obj, cls, rec->access_mode,
 &auditdata);
+               if (rc != Success)
+                       rec->status = rc;
+               return;
+       } else {
+               /*
+                * Device ID must be 0 or 1
+                * We have to check both possible classes as we don't know

whether it
+ * was a pointer or keyboard. Therefore all devices are
checked for:

Xext/xselinux_hooks.c +5 -0
+                *              rec->dev->id == XIAllDevices
+                * and only masters for:
+                *               rec->dev->id == XIAllMasterDevices
+                *
+                * An error is returned should any device fail

SELinuxDoCheck

Xext/xselinux_hooks.c +3 -0
+                */
+               for (dev = inputInfo.devices; dev; dev = dev->next, i++) {
+                       if (!IsMaster(dev) && rec->dev->id ==

XIAllMasterDevices)

Xext/xselinux_hooks.c +2 -0
+                               continue;
+                       cls = IsPointerDevice(dev) ? SECCLASS_X_POINTER :

SECCLASS_X_KEYBOARD;
+ obj = dixLookupPrivate(&dev->devPrivates,
objectKey);
+ rc = SELinuxDoCheck(subj, obj, cls, rec->access_mode,
&auditdata);

Xext/xselinux_hooks.c +7 -1
+                   if (rc != Success) {
+                               rec->status = rc;
+                               return;
+                       }
+               }
+       }
 }
 
+
 static void
 SELinuxSend(CallbackListPtr *pcbl, pointer unused, pointer calldata)
 {
--

1.7.10.2

_______________________________________________
[email protected]: X.Org development
Archives: http://lists.x.org/archives/xorg-devel
Info: http://lists.x.org/mailman/listinfo/xorg-devel