lpfc 8.3.32: Fix ability to change FCP EQ delay multiplier
Subsystems (2)
PATCH 7/10 lpfc 8.3.32: Fix ability to change FCP EQ delay multiplier
Fix fcp_imax module parameter to dynamically change FCP EQ delay multiplier
Signed-off-by Alex Iannicelli <[email protected]>
Signed-off-by James Smart <[email protected]>
---
lpfc_attr.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------ lpfc_hw4.h | 22 ++++++++++++++ lpfc_sli.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++ lpfc_sli4.h | 1 4 files changed, 185 insertions(+), 8 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +85 -8
@@ -3617,6 +3617,91 @@ lpfc_sriov_nr_virtfn_init(struct lpfc_hb static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR, lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store); +/** +* lpfc_fcp_imax_store +* +* @dev: class device that is converted into a Scsi_host. +* @attr: device attribute, not used. +* @buf: string with the number of fast-path FCP interrupts per second. +* @count: unused variable. +* +* Description: +* If val is in a valid range [636,651042], then set the adapter's +* maximum number of fast-path FCP interrupts per second. +* +* Returns: +* length of the buf on success if val is in range the intended mode +* is supported. +* -EINVAL if val out of range or intended mode is not supported. +**/ +static ssize_t +lpfc_fcp_imax_store (struct device *dev,struct device_attribute *attr, +const char *buf,size_t count) +{ +struct Scsi_Host *shost =class_to_shost (dev); +struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; +struct lpfc_hba *phba = vport->phba; +int val =0 , i; + +/* Sanity check on user data */ +if (!isdigit (buf[0 ])) +return -EINVAL ; +if (sscanf (buf,"%i" , &val) !=1 ) +return -EINVAL ; + +/* Value range is [636,651042] */ +if (val <LPFC_MIM_IMAX || val >LPFC_DMULT_CONST ) +return -EINVAL ; + + phba->cfg_fcp_imax = (uint32_t )val; +for (i =0 ; i < phba->cfg_fcp_eq_count; i +=LPFC_MAX_EQ_DELAY ) +lpfc_modify_fcp_eq_delay (phba, i); + +return strlen (buf); +} + +/* +# lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second +# +# Value range is [636,651042]. Default value is 10000. +*/ +static int lpfc_fcp_imax =LPFC_FP_DEF_IMAX ; +module_param (lpfc_fcp_imax, int,S_IRUGO |S_IWUSR ); +MODULE_PARM_DESC (lpfc_fcp_imax, +"Set the maximum number of fast-path FCP interrupts per second" ); +lpfc_param_show (fcp_imax) + +/** +* lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable +* @phba: lpfc_hba pointer. +* @val: link speed value. +* +* Description: +* If val is in a valid range [636,651042], then initialize the adapter's +* maximum number of fast-path FCP interrupts per second. +* +* Returns: +* zero if val saved. +* -EINVAL val out of range +**/ +static int +lpfc_fcp_imax_init (struct lpfc_hba *phba,int val) +{ +if (val >=LPFC_MIM_IMAX && val <=LPFC_DMULT_CONST ) { + phba->cfg_fcp_imax = val; +return 0 ; + } + +lpfc_printf_log (phba,KERN_ERR ,LOG_INIT , +"3016 fcp_imax: %d out of range, using default\n" , val); + phba->cfg_fcp_imax =LPFC_FP_DEF_IMAX ; + +return 0 ; +} + +static DEVICE_ATTR(lpfc_fcp_imax, S_IRUGO | S_IWUSR, + lpfc_fcp_imax_show, lpfc_fcp_imax_store); +/* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3.
@@ -3758,14 +3843,6 @@ LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Messa "MSI-X (2), if possible");/* -# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second -# -# Value range is [636,651042]. Default value is 10000. -*/ -LPFC_ATTR_R (fcp_imax,LPFC_FP_DEF_IMAX ,LPFC_MIM_IMAX ,LPFC_DMULT_CONST , -"Set the maximum number of fast-path FCP interrupts per second" ); - -/* # lpfc_fcp_wq_count: Set the number of fast-path FCP work queues # # Value range is [1,31]. Default value is 4.
drivers/scsi/lpfc/lpfc_hw4.h +22 -0
@@ -874,6 +874,7 @@ struct mbox_header {#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20#define LPFC_MBOX_OPCODE_NOP 0x21 +#define LPFC_MBOX_OPCODE_MODIFY_EQ_DELAY 0x29#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
@@ -940,6 +941,13 @@ struct eq_context {uint32_t reserved3; }; +struct eq_delay_info { +uint32_t eq_id; +uint32_t phase; +uint32_t delay_multi; +}; +#define LPFC_MAX_EQ_DELAY 8 +struct sgl_page_pairs {uint32_t sgl_pg0_addr_lo;uint32_t sgl_pg0_addr_hi;
@@ -1002,6 +1010,19 @@ struct lpfc_mbx_eq_create { } u; }; +struct lpfc_mbx_modify_eq_delay { +struct mbox_header header; +union { +struct { +uint32_t num_eq; +struct eq_delay_info eq[LPFC_MAX_EQ_DELAY ]; + } request; +struct { +uint32_t word0; + } response; + } u; +}; +struct lpfc_mbx_eq_destroy {struct mbox_header header;union {
@@ -2875,6 +2896,7 @@ struct lpfc_mqe {struct lpfc_mbx_mq_create mq_create;struct lpfc_mbx_mq_create_ext mq_create_ext;struct lpfc_mbx_eq_create eq_create; +struct lpfc_mbx_modify_eq_delay eq_delay;struct lpfc_mbx_cq_create cq_create;struct lpfc_mbx_wq_create wq_create;struct lpfc_mbx_rq_create rq_create;
drivers/scsi/lpfc/lpfc_sli4.h +1 -0
@@ -598,6 +598,7 @@ struct lpfc_queue *lpfc_sli4_queue_alloc uint32_t);void lpfc_sli4_queue_free (struct lpfc_queue *);uint32_t lpfc_eq_create (struct lpfc_hba *,struct lpfc_queue *,uint16_t ); +uint32_t lpfc_modify_fcp_eq_delay (struct lpfc_hba *,uint16_t );uint32_t lpfc_cq_create (struct lpfc_hba *,struct lpfc_queue *,struct lpfc_queue *,uint32_t ,uint32_t ); int32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
drivers/scsi/lpfc/lpfc_sli.c +77 -0
83 lines not on this page · raw message