python_numpy: Fix SRC_URI warnings.
This commit fixes the following warnings:
WARNING: Unable to get checksum for python-numpy SRC_URI entry config.h: file could not be found
WARNING: Unable to get checksum for python-numpy SRC_URI entry numpyconfig.h: file could not be found
--- .../recipes-devtools/python/python-numpy_1.4.1.bb | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
meta-oe/recipes-devtools/python/python-numpy_1.4.1.bb +9 -3
@@ -2,11 +2,17 @@ DESCRIPTION = "A sophisticated Numeric Processing Package for Python" SECTION = "devel/python" LICENSE = "PSF" LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=3c42211d73c3faa1026e671dd39883fa" -PR = "r3" +PR = "r4" SRC_URI = "${SOURCEFORGE_MIRROR}/numpy/numpy-${PV}.tar.gz \ - file://config.h \ - file://numpyconfig.h \ + " +SRC_URI_arm += " \ + file://arm/config.h \ + file://arm/numpyconfig.h \ + " +SRC_URI_mipsel += " \ + file://mipsel/config.h \ + file://mipsel/numpyconfig.h \ " S = "${WORKDIR}/numpy-${PV}"
Signature · 1 line
1.7.9.5
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 20 lines · Elvis Dowson
This commit fixes the following warnings: WARNING: Unable to get checksum for python-numpy
SRC_URIentryconfig.h: file could not be found WARNING: Unable to get checksum for python-numpySRC_URIentrynumpyconfig.h: file could not be foundSigned-off-by Elvis Dowson <[email protected]> ---.../recipes-devtools/python/python-numpy_1.4.1.bb | 12
+++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)(quoted diff) +0
-0b/meta-oe/recipes-devtools/python/python-numpy_1.4.1.bb index a67bf8b..bdcdf91 100644 --- a/meta-oe/recipes-devtools/python/python-numpy_1.4.1.bb +++ b/meta-oe/recipes-devtools/python/python-numpy_1.4.1.bb @@ -2,11 +2,17 @@ DESCRIPTION = "A sophisticated Numeric Processing Package for Python" SECTION = "devel/python" LICENSE = "PSF"
LIC_FILES_CHKSUM= "file://LICENSE.txt;md5=3c42211d73c3faa1026e671dd39883fa" -PR = "r3" +PR = "r4"
Quoted 7 lines
SRC_URI= "${SOURCEFORGE_MIRROR}/numpy/numpy-${PV}.tar.gz \ -
file://config.h \ - file://numpyconfig.h \ + " +SRC_URI_arm +=
" \ + file://arm/config.h \ +
file://arm/numpyconfig.h \ + " +SRC_URI_mipsel += " \ +
file://mipsel/config.h \ + file://mipsel/numpyconfig.h \
"
Did you test it on arm/mipsel and made sure that SRC_URI is correct after this change ?
Quoted 2 lines
S = "${WORKDIR}/numpy-${PV}"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk/j9IIACgkQuwUzVZGdMxRdNwCfRMpvWZtDIwMi4EkqZVhN9YbW WPwAn3VFiygw3k119AqPDm7gxm8UVIl2
=NYbZ
-----END PGP SIGNATURE-----
Hi Khem,
Quoted 2 lines · Khem Raj
Did you test it on arm/mipsel and made sure that
SRC_URIis correct after this change ?
No, I did not. The location of the files had move to architecture specific folders, but the main recipe had not been updated to reflect this, so I just corrected the recipe.
I have an armv7a board (TI OMAP3530 based Gumstix Overo Fire), but no mipsel based board. At the moment, I'm focussing on the powerpc440 on my virtex5 fpga board, so perhaps someone else with an arm and mipsel could help test it out.
Best regards,
Elvis Dowson
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 3 lines · Elvis Dowson
No, I did not. The location of the files had move to architecture specific folders, but the main recipe had not been updated to reflect this, so I just corrected the recipe.
OK you can just do
MACHINE=qemuarm bitbake -e python-numpy | grep -i "^SRC_URI="
and see what it shows.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk/j+IQACgkQuwUzVZGdMxTyiQCglNWEIfS2EC7Sm0R60GsT0m4I pOsAn1olV/oDwSSqVYxpy3hoaFP1YJgo
=9qri
-----END PGP SIGNATURE-----
Hi Khem,
Quoted 5 lines · Khem Raj
OK you can just do
MACHINE=qemuarm bitbake -e python-numpy | grep -i "^SRC_URI="
and see what it shows.
That command returned empty.
I'll modify the patch with the CONFIGFILESURI as you suggested.
Best regards,
Elvis Dowson
Quoted 3 lines · Elvis Dowson
That command returned empty.
:) thats what I expected.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 20 lines · Elvis Dowson
This commit fixes the following warnings: WARNING: Unable to get checksum for python-numpy
SRC_URIentryconfig.h: file could not be found WARNING: Unable to get checksum for python-numpySRC_URIentrynumpyconfig.h: file could not be foundSigned-off-by Elvis Dowson <[email protected]> ---.../recipes-devtools/python/python-numpy_1.4.1.bb | 12
+++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)(quoted diff) +0
-0b/meta-oe/recipes-devtools/python/python-numpy_1.4.1.bb index a67bf8b..bdcdf91 100644 --- a/meta-oe/recipes-devtools/python/python-numpy_1.4.1.bb +++ b/meta-oe/recipes-devtools/python/python-numpy_1.4.1.bb @@ -2,11 +2,17 @@ DESCRIPTION = "A sophisticated Numeric Processing Package for Python" SECTION = "devel/python" LICENSE = "PSF"
LIC_FILES_CHKSUM= "file://LICENSE.txt;md5=3c42211d73c3faa1026e671dd39883fa" -PR = "r3" +PR = "r4"
Quoted 9 lines
SRC_URI= "${SOURCEFORGE_MIRROR}/numpy/numpy-${PV}.tar.gz \ -
file://config.h \ - file://numpyconfig.h \ + " +SRC_URI_arm +=
" \ + file://arm/config.h \ +
file://arm/numpyconfig.h \ + " +SRC_URI_mipsel += " \ +
file://mipsel/config.h \ + file://mipsel/numpyconfig.h \
"S = "${WORKDIR}/numpy-${PV}"
anyway something like below is what you need.
SRC_URI = "${SOURCEFORGE_MIRROR}/numpy/numpy-${PV}.tar.gz \
${CONFIGFILESURI} \
"CONFIGFILESURI ?= ""
CONFIGFILESURI_arm = "file://config.h \
file://numpyconfig.h \
"CONFIGFILESURI_mipsel = "file://config.h \
file://numpyconfig.h \
"-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk/j+ckACgkQuwUzVZGdMxRl/QCfZL/I+bjl6bjd2xkb+1lsSXqn /E0An1i6f1IqSKrdHhHy308N0DK2BI9l
=KzI2
-----END PGP SIGNATURE-----
Hi Khem,
Quoted 6 lines · Khem Raj
anyway something like below is what you need.
SRC_URI = "${SOURCEFORGE_MIRROR}/numpy/numpy-${PV}.tar.gz \ ${CONFIGFILESURI} \ "
Quoted 7 lines
CONFIGFILESURI ?= ""
CONFIGFILESURI_arm = "file://config.h \ file://numpyconfig.h \ "CONFIGFILESURI_mipsel = "file://config.h \ file://numpyconfig.h \
I made the changes as you suggested and now the SRCURI is reporting the correct values:
$ MACHINE=qemuarm bitbake -e python-numpy | grep -i "^SRC_URI=" SRC_URI="http://downloads.sourceforge.net/numpy/numpy-1.4.1.tar.gz file://config.h file://numpyconfig.h"
I'll submit a patch now.
Best regards,
Elvis Dowson