*** ARM: Update arch-vt8500 to Devicetree ***
Subsystems (11)
v2 cover *** ARM: Update arch-vt8500 to Devicetree ***
This patchset updates arch-vt8500 to devicetree and removes all the old-style code. Support for WM8650 has also been added.
Example dts/dtsi files are given for the three currently supported models.
Major changes:
GPIO code has been converted to a platform_device and rewritten as WM8505 support was broken. Add support for WM8650 gpio controller.
UHCI support was missing. Added this as a generic non-pci uhci controller as it doesn't require anything special. Should be usable by any system that doesn't have special requirements to get the UHCI controller working.
Framebuffer code patched to support WM8650. The bindings for this are of concern but there doesn't seem to be a formalized binding yet. This patch is based off Sascha Hauer's current patch on the dri-devel mailing list and should be easily patched out when its finalized.
Patchset based on Arnd's arm-soc/for-next branch.
Could I get this reviewed, hopefully for inclusion into v3.7.
Regards
Tony Prisk
Changes
v2:
Cleanup style/formatting errors
Removed erroneous commit message about GPIO not being converted to devicetree Corrected arch-vt8500/irq.c header to correct filename
Changed GPIO driver to use module_platform_driver()
Renamed vt8500_gpio_bank_regs -> vt8500_gpio_bank_regoffsets Changed vt8500_gpio_bank_regoffset fields to unsigned int
Changed bit-setting code to use BIT() macro
Removed of_find_compatible() and use pdev->dev.of_node in _probe() Removed regoff field and related code - leftover from old design Added kerneldoc regarding struct vt8500_gpio_bank_regoffsets fields Update MODULE_LICENSE on all platform devices to "GPL v2" to match their headers Renamed dts board files to clarify product names
Tony Prisk (8):
arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
rtc: vt8500: Add devicetree support for vt8500-rtc
serial: vt8500: Add devicetree support for vt8500-serial
usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
arm: vt8500: Update arch-vt8500 to devicetree support.
arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
ARM: vt8500: gpio: Devicetree support for arch-vt8500
Documentation/devicetree/bindings/arm/vt8500.txt | 15 + .../bindings/arm/vt8500/via,vt8500-intc.txt | 16 + .../bindings/arm/vt8500/via,vt8500-pmc.txt | 13 + .../bindings/arm/vt8500/via,vt8500-timer.txt | 15 + .../devicetree/bindings/gpio/gpio_vt8500.txt | 24 ++ .../devicetree/bindings/rtc/via,vt8500-rtc.txt | 15 + .../bindings/tty/serial/via,vt8500-uart.txt | 15 + .../devicetree/bindings/usb/platform-uhci.txt | 15 + .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 + .../devicetree/bindings/vendor-prefixes.txt | 2 + .../devicetree/bindings/video/via,vt8500-fb.txt | 46 +++ .../devicetree/bindings/video/wm,prizm-ge-rops.txt | 13 + .../devicetree/bindings/video/wm,wm8505-fb.txt | 20 ++ arch/arm/Kconfig | 2 + arch/arm/boot/dts/vt8500.dtsi | 99 ++++++ arch/arm/boot/dts/vt8500_ref.dts | 31 ++ arch/arm/boot/dts/wm8505.dtsi | 125 ++++++++ arch/arm/boot/dts/wm8505_ref.dts | 31 ++ arch/arm/boot/dts/wm8650.dtsi | 95 ++++++ arch/arm/boot/dts/wm8650_ref.dts | 31 ++ arch/arm/mach-vt8500/Kconfig | 72 +---- arch/arm/mach-vt8500/Makefile | 9 +- arch/arm/mach-vt8500/bv07.c | 80 ----- arch/arm/mach-vt8500/common.h | 25 ++ arch/arm/mach-vt8500/devices-vt8500.c | 91 ------ arch/arm/mach-vt8500/devices-wm8505.c | 99 ------ arch/arm/mach-vt8500/devices.c | 270 ----------------- arch/arm/mach-vt8500/devices.h | 88 ------ arch/arm/mach-vt8500/gpio.c | 240 --------------- arch/arm/mach-vt8500/include/mach/restart.h | 4 +- arch/arm/mach-vt8500/include/mach/vt8500_irqs.h | 88 ------ arch/arm/mach-vt8500/include/mach/vt8500_regs.h | 79 ----- arch/arm/mach-vt8500/include/mach/wm8505_irqs.h | 115 ------- arch/arm/mach-vt8500/include/mach/wm8505_regs.h | 78 ----- arch/arm/mach-vt8500/irq.c | 160 +++++----- arch/arm/mach-vt8500/restart.c | 54 ---- arch/arm/mach-vt8500/timer.c | 56 +++- arch/arm/mach-vt8500/vt8500.c | 192 ++++++++++++ arch/arm/mach-vt8500/wm8505_7in.c | 79 ----- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-vt8500.c | 318 ++++++++++++++++++++ drivers/rtc/rtc-vt8500.c | 7 + drivers/tty/serial/vt8500_serial.c | 7 + drivers/usb/host/Kconfig | 4 +- drivers/usb/host/ehci-vt8500.c | 24 +- drivers/usb/host/uhci-hcd.c | 5 + drivers/usb/host/uhci-platform.c | 166 ++++++++++ drivers/video/Kconfig | 6 +- drivers/video/vt8500lcdfb.c | 77 ++++- drivers/video/wm8505fb.c | 95 +++++- drivers/video/wmt_ge_rops.c | 7 + 52 files changed, 1674 insertions(+), 1566 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/vt8500.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio_vt8500.txt create mode 100644 Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt create mode 100644 Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt create mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt create mode 100644 Documentation/devicetree/bindings/video/via,vt8500-fb.txt create mode 100644 Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt create mode 100644 Documentation/devicetree/bindings/video/wm,wm8505-fb.txt create mode 100644 arch/arm/boot/dts/vt8500.dtsi create mode 100644 arch/arm/boot/dts/vt8500_ref.dts create mode 100644 arch/arm/boot/dts/wm8505.dtsi create mode 100644 arch/arm/boot/dts/wm8505_ref.dts create mode 100644 arch/arm/boot/dts/wm8650.dtsi create mode 100644 arch/arm/boot/dts/wm8650_ref.dts delete mode 100644 arch/arm/mach-vt8500/bv07.c create mode 100644 arch/arm/mach-vt8500/common.h delete mode 100644 arch/arm/mach-vt8500/devices-vt8500.c delete mode 100644 arch/arm/mach-vt8500/devices-wm8505.c delete mode 100644 arch/arm/mach-vt8500/devices.c delete mode 100644 arch/arm/mach-vt8500/devices.h delete mode 100644 arch/arm/mach-vt8500/gpio.c delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_regs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_regs.h delete mode 100644 arch/arm/mach-vt8500/restart.c create mode 100644 arch/arm/mach-vt8500/vt8500.c delete mode 100644 arch/arm/mach-vt8500/wm8505_7in.c create mode 100644 drivers/gpio/gpio-vt8500.c create mode 100644 drivers/usb/host/uhci-platform.c
Signature · 1 line
1.7.9.5
PATCH v2 1/8 arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
Add device tree files for VT8500, WM8505 and WM8650 SoC's and reference boards.
--- arch/arm/boot/dts/vt8500-bv07.dts | 31 +++++++++ arch/arm/boot/dts/vt8500.dtsi | 99 +++++++++++++++++++++++++++++ arch/arm/boot/dts/wm8505-ref.dts | 31 +++++++++ arch/arm/boot/dts/wm8505.dtsi | 125 +++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/wm8650-mid.dts | 31 +++++++++ arch/arm/boot/dts/wm8650.dtsi | 95 ++++++++++++++++++++++++++++ 6 files changed, 412 insertions(+) create mode 100644 arch/arm/boot/dts/vt8500-bv07.dts create mode 100644 arch/arm/boot/dts/vt8500.dtsi create mode 100644 arch/arm/boot/dts/wm8505-ref.dts create mode 100644 arch/arm/boot/dts/wm8505.dtsi create mode 100644 arch/arm/boot/dts/wm8650-mid.dts create mode 100644 arch/arm/boot/dts/wm8650.dtsi
arch/arm/boot/dts/vt8500-bv07.dts new file +31 -0
@@ -0,0 +1,31 @@ +/* + * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook + * + * Copyright (C) 2012 Tony Prisk <[email protected]> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "vt8500.dtsi" + +/ { + model = "Benign BV07 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display { + xres = <800>; + yres = <480>; + left-margin = <88>; + right-margin = <40>; + hsync-len = <0>; + upper-margin = <32>; + lower-margin = <11>; + vsync-len = <1>; + bpp = <16>; + }; +};
arch/arm/boot/dts/vt8500.dtsi new file +99 -0
99 lines not on this page · raw message
arch/arm/boot/dts/wm8505-ref.dts new file +31 -0
@@ -0,0 +1,31 @@ +/* + * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook + * + * Copyright (C) 2012 Tony Prisk <[email protected]> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8505.dtsi" + +/ { + model = "Wondermedia WM8505 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display { + xres = <800>; + yres = <480>; + left-margin = <88>; + right-margin = <40>; + hsync-len = <0>; + upper-margin = <32>; + lower-margin = <11>; + vsync-len = <1>; + bpp = <32>; + }; +};
arch/arm/boot/dts/wm8505.dtsi new file +125 -0
125 lines not on this page · raw message
arch/arm/boot/dts/wm8650-mid.dts new file +31 -0
@@ -0,0 +1,31 @@ +/* + * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet + * + * Copyright (C) 2012 Tony Prisk <[email protected]> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8650.dtsi" + +/ { + model = "Wondermedia WM8650-MID Tablet"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display { + xres = <800>; + yres = <480>; + left-margin = <88>; + right-margin = <40>; + hsync-len = <0>; + upper-margin = <32>; + lower-margin = <11>; + vsync-len = <1>; + bpp = <16>; + }; +};
arch/arm/boot/dts/wm8650.dtsi new file +95 -0
95 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v2 2/8 rtc: vt8500: Add devicetree support for vt8500-rtc
In reply to Tony Prisk--- drivers/rtc/rtc-vt8500.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/rtc/rtc-vt8500.c +8 -1
@@ -23,6 +23,7 @@#include <linux/bcd.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/of.h> /* * Register definitions
@@ -302,12 +303,18 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev)return 0 ; } +static const struct of_device_id wmt_dt_ids[] = { + { .compatible ="via,vt8500-rtc" , }, + {} +}; +static struct platform_driver vt8500_rtc_driver = { .probe = vt8500_rtc_probe, .remove =__devexit_p (vt8500_rtc_remove), .driver = { .name ="vt8500-rtc" , .owner =THIS_MODULE , + .of_match_table =of_match_ptr (wmt_dt_ids), }, };
@@ -315,5 +322,5 @@ module_platform_driver(vt8500_rtc_driver);MODULE_AUTHOR ("Alexey Charkov <[email protected]>" );MODULE_DESCRIPTION ("VIA VT8500 SoC Realtime Clock Driver (RTC)" ); -MODULE_LICENSE ("GPL" ); +MODULE_LICENSE ("GPL v2" );MODULE_ALIAS ("platform:vt8500-rtc" );
Signature · 1 line
1.7.9.5
PATCH v2 3/8 serial: vt8500: Add devicetree support for vt8500-serial
In reply to Tony Prisk--- drivers/tty/serial/vt8500_serial.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/tty/serial/vt8500_serial.c +8 -1
@@ -34,6 +34,7 @@#include <linux/slab.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of.h> /* * UART Register offsets
@@ -603,12 +604,18 @@ static int __devexit vt8500_serial_remove(struct platform_device *pdev)return 0 ; } +static const struct of_device_id wmt_dt_ids[] = { + { .compatible ="via,vt8500-uart" , }, + {} +}; +static struct platform_driver vt8500_platform_driver = { .probe = vt8500_serial_probe, .remove =__devexit_p (vt8500_serial_remove), .driver = { .name ="vt8500_serial" , .owner =THIS_MODULE , + .of_match_table =of_match_ptr (wmt_dt_ids), }, };
@@ -642,4 +649,4 @@ module_exit(vt8500_serial_exit);MODULE_AUTHOR ("Alexey Charkov <[email protected]>" );MODULE_DESCRIPTION ("Driver for vt8500 serial device" ); -MODULE_LICENSE ("GPL" ); +MODULE_LICENSE ("GPL v2" );
Signature · 1 line
1.7.9.5
PATCH v2 4/8 usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
In reply to Tony PriskAdd devicetree support for vt8500-ehci.
Convert vt8500-uhci to a generic non-pci platform-uhci with device tree support.
--- drivers/usb/host/Kconfig | 4 +- drivers/usb/host/ehci-vt8500.c | 25 ++++-- drivers/usb/host/uhci-hcd.c | 5 ++ drivers/usb/host/uhci-platform.c | 169 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 195 insertions(+), 8 deletions(-) create mode 100644 drivers/usb/host/uhci-platform.c
drivers/usb/host/Kconfig +2 -2
@@ -450,7 +450,7 @@ config USB_OHCI_LITTLE_ENDIAN config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON) + depends on USB && (PCI || SPARC_LEON || ARCH_VT8500) ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB
@@ -468,7 +468,7 @@ config USB_UHCI_HCD config USB_UHCI_SUPPORT_NON_PCI_HC bool depends on USB_UHCI_HCD - default y if SPARC_LEON + default y if (SPARC_LEON || ARCH_VT8500) config USB_UHCI_BIG_ENDIAN_MMIO bool
drivers/usb/host/ehci-vt8500.c +19 -6
@@ -16,6 +16,7 @@* */ +#include <linux/of.h> #include <linux/platform_device.h> static int ehci_update_device (struct usb_hcd *hcd,struct usb_device *udev)
@@ -84,20 +85,23 @@ static const struct hc_driver vt8500_ehci_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +static u64 wmt_ehci_dma_mask =DMA_BIT_MASK (32 ); +static int vt8500_ehci_drv_probe (struct platform_device *pdev) {struct usb_hcd *hcd;struct ehci_hcd *ehci;struct resource *res; +int irq;int ret;if (usb_disabled ())return -ENODEV ; -if (pdev->resource[1 ].flags !=IORESOURCE_IRQ ) { -pr_debug ("resource[1] is not IORESOURCE_IRQ" ); -return -ENOMEM ; - } +/* devicetree created devices don't specify a dma mask */ +if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &wmt_ehci_dma_mask; + hcd =usb_create_hcd (&vt8500_ehci_hc_driver, &pdev->dev,"VT8500" );if (!hcd)return -ENOMEM ;
@@ -134,8 +138,9 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)ehci_reset (ehci); - ret =usb_add_hcd (hcd, pdev->resource[1 ].start, -IRQF_SHARED ); + irq =platform_get_irq (pdev,0 ); + + ret =usb_add_hcd (hcd, irq,IRQF_SHARED );if (ret ==0 ) {platform_set_drvdata (pdev, hcd);return ret;
@@ -162,6 +167,11 @@ static int vt8500_ehci_drv_remove(struct platform_device *pdev)return 0 ; } +static const struct of_device_id vt8500_ehci_ids[] = { + { .compatible ="via,vt8500-ehci" , }, + {} +}; +static struct platform_driver vt8500_ehci_driver = { .probe = vt8500_ehci_drv_probe, .remove = vt8500_ehci_drv_remove,
@@ -169,7 +179,10 @@ static struct platform_driver vt8500_ehci_driver = { .driver = { .name = "vt8500-ehci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(vt8500_ehci_ids), } };MODULE_ALIAS ("platform:vt8500-ehci" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DEVICE_TABLE (of, vt8500_ehci_ids);
drivers/usb/host/uhci-hcd.c +5 -0
@@ -846,6 +846,11 @@ static const char hcd_name[] = "uhci_hcd";#define PLATFORM_DRIVER uhci_grlib_driver#endif +#ifdef CONFIG_ARCH_VT8500 +#include "uhci-platform.c" +#define PLATFORM_DRIVER uhci_platform_driver +#endif +#if !defined(PCI_DRIVER ) && !defined(PLATFORM_DRIVER )#error "missing bus glue for uhci-hcd"#endif
drivers/usb/host/uhci-platform.c new file +169 -0
169 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v2 5/8 video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
In reply to Tony PriskUpdate vt8500-fb, wm8505-fb and wmt-ge-rops to support device tree bindings.
Small change in wm8505-fb.c to support WM8650 framebuffer color format.
--- drivers/video/Kconfig | 6 +-- drivers/video/vt8500lcdfb.c | 79 ++++++++++++++++++++++++++++++----- drivers/video/wm8505fb.c | 97 ++++++++++++++++++++++++++++++++++++------- drivers/video/wmt_ge_rops.c | 9 +++- 4 files changed, 161 insertions(+), 30 deletions(-)
drivers/video/Kconfig +3 -3
@@ -1788,7 +1788,7 @@ config FB_AU1200 config FB_VT8500 bool "VT8500 LCD Driver" - depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_VT8500 + depends on (FB = y) && ARM && ARCH_VT8500 select FB_WMT_GE_ROPS select FB_SYS_IMAGEBLIT help
@@ -1797,11 +1797,11 @@ config FB_VT8500 config FB_WM8505 bool "WM8505 frame buffer support" - depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_WM8505 + depends on (FB = y) && ARM && ARCH_VT8500 select FB_WMT_GE_ROPS select FB_SYS_IMAGEBLIT help - This is the framebuffer driver for WonderMedia WM8505 + This is the framebuffer driver for WonderMedia WM8505/WM8650 integrated LCD controller. source "drivers/video/geode/Kconfig"
drivers/video/vt8500lcdfb.c +68 -11
124 lines not on this page · raw message
drivers/video/wm8505fb.c +82 -15
155 lines not on this page · raw message
drivers/video/wmt_ge_rops.c +8 -1
@@ -158,12 +158,18 @@ static int __devexit wmt_ge_rops_remove(struct platform_device *pdev)return 0 ; } +static const struct of_device_id wmt_dt_ids[] = { + { .compatible ="wm,prizm-ge-rops" , }, + {/* sentinel */ } +}; +static struct platform_driver wmt_ge_rops_driver = { .probe = wmt_ge_rops_probe, .remove =__devexit_p (wmt_ge_rops_remove), .driver = { .owner =THIS_MODULE , .name ="wmt_ge_rops" , + .of_match_table =of_match_ptr (wmt_dt_ids), }, };
@@ -172,4 +178,5 @@ module_platform_driver(wmt_ge_rops_driver);MODULE_AUTHOR ("Alexey Charkov <[email protected]" );MODULE_DESCRIPTION ("Accelerators for raster operations using " "WonderMedia Graphics Engine" ); -MODULE_LICENSE ("GPL" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DEVICE_TABLE (of, wmt_dt_ids);
Signature · 1 line
1.7.9.5
PATCH v2 6/8 arm: vt8500: Update arch-vt8500 to devicetree support.
In reply to Tony PriskMerged existing board files to a single dt-capable file. Converted irq and timer code to devicetree.
Removed existing device files that are no longer required with devicetree support.
All existing platform devices are converted to devicetree nodes except PWM.
Removed restart.c and moved code into vt8500.c to remove duplicate PMC code.
--- arch/arm/Kconfig | 2 + arch/arm/mach-vt8500/Kconfig | 72 +----- arch/arm/mach-vt8500/Makefile | 9 +- arch/arm/mach-vt8500/bv07.c | 80 ------- arch/arm/mach-vt8500/common.h | 25 +++ arch/arm/mach-vt8500/devices-vt8500.c | 91 -------- arch/arm/mach-vt8500/devices-wm8505.c | 99 --------- arch/arm/mach-vt8500/devices.c | 270 ----------------------- arch/arm/mach-vt8500/devices.h | 88 -------- arch/arm/mach-vt8500/gpio.c | 240 -------------------- arch/arm/mach-vt8500/include/mach/restart.h | 4 +- arch/arm/mach-vt8500/include/mach/vt8500_irqs.h | 88 -------- arch/arm/mach-vt8500/include/mach/vt8500_regs.h | 79 ------- arch/arm/mach-vt8500/include/mach/wm8505_irqs.h | 115 ---------- arch/arm/mach-vt8500/include/mach/wm8505_regs.h | 78 ------- arch/arm/mach-vt8500/irq.c | 162 +++++++------- arch/arm/mach-vt8500/restart.c | 54 ----- arch/arm/mach-vt8500/timer.c | 67 ++++-- arch/arm/mach-vt8500/vt8500.c | 195 ++++++++++++++++ arch/arm/mach-vt8500/wm8505_7in.c | 79 ------- 20 files changed, 363 insertions(+), 1534 deletions(-) delete mode 100644 arch/arm/mach-vt8500/bv07.c create mode 100644 arch/arm/mach-vt8500/common.h delete mode 100644 arch/arm/mach-vt8500/devices-vt8500.c delete mode 100644 arch/arm/mach-vt8500/devices-wm8505.c delete mode 100644 arch/arm/mach-vt8500/devices.c delete mode 100644 arch/arm/mach-vt8500/devices.h delete mode 100644 arch/arm/mach-vt8500/gpio.c delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_regs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_regs.h delete mode 100644 arch/arm/mach-vt8500/restart.c create mode 100644 arch/arm/mach-vt8500/vt8500.c delete mode 100644 arch/arm/mach-vt8500/wm8505_7in.c
arch/arm/Kconfig +2 -0
@@ -996,6 +996,7 @@ config ARCH_VT8500 select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select HAVE_PWM + select USE_OF help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
@@ -1613,6 +1614,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 288 if ARCH_VT8500 default 0 help Maximum number of GPIOs in the system.
arch/arm/mach-vt8500/Kconfig +7 -65
80 lines not on this page · raw message
arch/arm/mach-vt8500/Makefile +2 -7
@@ -1,9 +1,4 @@ -obj-y += devices.o gpio.o irq.o timer.o restart.o - -obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o -obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o - -obj-$(CONFIG_MACH_BV07) += bv07.o -obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o +obj-$(CONFIG_VTWM_VERSION_WMT_DT) += irq.o timer.o +obj-$(CONFIG_MACH_WMT_DT) += vt8500.o obj-$(CONFIG_HAVE_PWM) += pwm.o
arch/arm/mach-vt8500/bv07.c deleted +0 -80
80 lines not on this page · raw message
arch/arm/mach-vt8500/common.h new file +25 -0
@@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-vt8500/dt_common.h +* +* Copyright (C) 2012 Tony Prisk <[email protected]> +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H +#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H + +#include <linux/of.h> + +void __init vt8500_timer_init (void ); +int __init vt8500_irq_init (struct device_node *node, +struct device_node *parent); + +#endif
arch/arm/mach-vt8500/devices-vt8500.c deleted +0 -91
91 lines not on this page · raw message
arch/arm/mach-vt8500/devices-wm8505.c deleted +0 -99
99 lines not on this page · raw message
arch/arm/mach-vt8500/devices.c deleted +0 -270
270 lines not on this page · raw message
arch/arm/mach-vt8500/devices.h deleted +0 -88
88 lines not on this page · raw message
arch/arm/mach-vt8500/gpio.c deleted +0 -240
240 lines not on this page · raw message
arch/arm/mach-vt8500/include/mach/restart.h +2 -2
@@ -13,5 +13,5 @@* */ -void wmt_setup_restart (void ); -void wmt_restart (char mode,const char *cmd); +void vt8500_setup_restart (void ); +void vt8500_restart (char mode,const char *cmd);
arch/arm/mach-vt8500/include/mach/vt8500_irqs.h deleted +0 -88
88 lines not on this page · raw message
arch/arm/mach-vt8500/include/mach/vt8500_regs.h deleted +0 -79
79 lines not on this page · raw message
arch/arm/mach-vt8500/include/mach/wm8505_irqs.h deleted +0 -115
115 lines not on this page · raw message
arch/arm/mach-vt8500/include/mach/wm8505_regs.h deleted +0 -78
78 lines not on this page · raw message
arch/arm/mach-vt8500/irq.c +82 -80
242 lines not on this page · raw message
arch/arm/mach-vt8500/restart.c deleted +0 -54
54 lines not on this page · raw message
arch/arm/mach-vt8500/timer.c +48 -19
131 lines not on this page · raw message
arch/arm/mach-vt8500/vt8500.c new file +195 -0
195 lines not on this page · raw message
arch/arm/mach-vt8500/wm8505_7in.c deleted +0 -79
79 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v2 7/8 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
In reply to Tony PriskBindings for gpio, interrupt controller, power management controller, timer, realtime clock, serial uart, ehci and uhci controllers and framebuffer controllers used on the arch-vt8500 platform.
Framebuffer binding also specifies a 'display' node which is required for determining the lcd panel data.
--- Documentation/devicetree/bindings/arm/vt8500.txt | 15 +++++++ .../bindings/arm/vt8500/via,vt8500-intc.txt | 16 +++++++ .../bindings/arm/vt8500/via,vt8500-pmc.txt | 13 ++++++ .../bindings/arm/vt8500/via,vt8500-timer.txt | 15 +++++++ .../devicetree/bindings/gpio/gpio_vt8500.txt | 24 ++++++++++ .../devicetree/bindings/rtc/via,vt8500-rtc.txt | 15 +++++++ .../bindings/tty/serial/via,vt8500-uart.txt | 15 +++++++ .../devicetree/bindings/usb/platform-uhci.txt | 15 +++++++ .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 2 + .../devicetree/bindings/video/via,vt8500-fb.txt | 46 ++++++++++++++++++++ .../devicetree/bindings/video/wm,prizm-ge-rops.txt | 13 ++++++ .../devicetree/bindings/video/wm,wm8505-fb.txt | 20 +++++++++ 13 files changed, 224 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/vt8500.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio_vt8500.txt create mode 100644 Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt create mode 100644 Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt create mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt create mode 100644 Documentation/devicetree/bindings/video/via,vt8500-fb.txt create mode 100644 Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt create mode 100644 Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
Documentation/devicetree/bindings/arm/vt8500.txt new file +15 -0
@@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Platforms Device Tree Bindings +--------------------------------------- + +Boards with the VIA VT8500 SoC shall have the following properties: +Required root node property: +compatible = "via,vt8500"; + +Boards with the Wondermedia WM8505 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8505"; + +Boards with the Wondermedia WM8650 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8650"; +
Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt new file +16 -0
@@ -0,0 +1,16 @@ +VIA/Wondermedia VT8500 Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-intc" +- reg : Should contain 1 register ranges(address and length) +- #interrupt-cells : should be <1> + +Example: + + intc: interrupt-controller at d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + };
Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt new file +13 -0
@@ -0,0 +1,13 @@ +VIA/Wondermedia VT8500 Power Management Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-pmc" +- reg : Should contain 1 register ranges(address and length) + +Example: + + pmc at d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + };
Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt new file +15 -0
@@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Timer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-timer" +- reg : Should contain 1 register ranges(address and length) +- interrupts : interrupt for the timer + +Example: + + timer at d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + };
Documentation/devicetree/bindings/gpio/gpio_vt8500.txt new file +24 -0
@@ -0,0 +1,24 @@ +VIA/Wondermedia VT8500 GPIO Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-gpio", "wm,wm8505-gpio" + or "wm,wm8650-gpio" depending on your SoC +- reg : Should contain 1 register range (address and length) +- #gpio-cells : should be <3>. + 1) bank + 2) pin number + 3) flags + +Example: + + gpio: gpio-controller at d8110000 { + compatible = "via,vt8500-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + vibrate { + gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */ + };
Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt new file +15 -0
@@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Realtime Clock Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-rtc" +- reg : Should contain 1 register ranges(address and length) +- interrupts : alarm interrupt + +Example: + + rtc at d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + };
Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt new file +15 -0
@@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 UART Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-uart" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UART interrupt + +Example: + + uart at d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + };
Documentation/devicetree/bindings/usb/platform-uhci.txt new file +15 -0
@@ -0,0 +1,15 @@ +Generic Platform UHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "platform-uhci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UHCI controller interrupt + +Example: + + uhci at d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + };
Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt new file +15 -0
@@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 EHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-ehci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : ehci controller interrupt + +Example: + + ehci at d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + };
Documentation/devicetree/bindings/vendor-prefixes.txt +2 -0
@@ -47,5 +47,7 @@ sirf SiRF Technology, Inc. st STMicroelectronics stericsson ST-Ericsson ti Texas Instruments +via VIA Technologies, Inc. wlf Wolfson Microelectronics +wm Wondermedia Technologies, Inc. xlnx Xilinx
Documentation/devicetree/bindings/video/via,vt8500-fb.txt new file +46 -0
46 lines not on this page · raw message
Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt new file +13 -0
@@ -0,0 +1,13 @@ +VIA/Wondermedia Graphics Engine Controller +----------------------------------------------------- + +Required properties: +- compatible : "wm,prizm-ge-rops" +- reg : Should contain 1 register ranges(address and length) + +Example: + + ge_rops at d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + };
Documentation/devicetree/bindings/video/wm,wm8505-fb.txt new file +20 -0
@@ -0,0 +1,20 @@ +Wondermedia WM8505 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "wm,wm8505-fb" +- reg : Should contain 1 register ranges(address and length) + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. See definition in + Documentation/devicetree/bindings/video/via,vt8500-fb.txt + + +Example: + + fb at d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + }; +
Signature · 1 line
1.7.9.5
PATCH v2 8/8 arm: vt8500: gpio: Devicetree support for arch-vt8500
In reply to Tony PriskConverted the existing arch-vt8500 gpio to a platform_device. Added support for WM8505 and WM8650 GPIO controllers.
--- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-vt8500.c | 313 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 320 insertions(+) create mode 100644 drivers/gpio/gpio-vt8500.c
drivers/gpio/Kconfig +6 -0
@@ -183,6 +183,12 @@ config GPIO_STA2X11 Say yes here to support the STA2x11/ConneXt GPIO device. The GPIO module has 128 GPIO pins with alternate functions. +config GPIO_VT8500 + bool "VIA/Wondermedia SoC GPIO Support" + depends on ARCH_VT8500 + help + Say yes here to support the VT8500/WM8505/WM8650 GPIO controller. + config GPIO_XILINX bool "Xilinx GPIO support" depends on PPC_OF || MICROBLAZE
drivers/gpio/Makefile +1 -0
@@ -66,6 +66,7 @@ obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o +obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
drivers/gpio/gpio-vt8500.c new file +313 -0
313 lines not on this page · raw message
Signature · 1 line
1.7.9.5
Quoted 2 lines · Tony Prisk
This patchset updates arch-vt8500 to devicetree and removes all the old-style code. Support for WM8650 has also been added.
Sorry for taking such a long time to re-review this.
I scanned the series looking for just the changes to the issues I raised on v1, and I do see almost everything has been fixed up OK, except for the one issue I just commented on. So, aside from that, this series is fine by me. I'll defer to others about whether it's necessary to fix the display node-name-vs.-phandle issue I pointed out, or defer that until later.
v2 cover *** ARM: Update arch-vt8500 to Devicetree ***
Quoted 4 lines
Quoted 3 lines · Tony Prisk
This patchset updates arch-vt8500 to devicetree and removes all the old-style code. Support for WM8650 has also been added.
Quoted 8 lines
Sorry for taking such a long time to re-review this.
I scanned the series looking for just the changes to the issues I raised on v1, and I do see almost everything has been fixed up OK, except for the one issue I just commented on. So, aside from that, this series is fine by me. I'll defer to others about whether it's necessary to fix the display node-name-vs.-phandle issue I pointed out, or defer that until later.
Thanks for the review Stephen.
There will be a v3 shortly - I noticed a few other issues that needed to be corrected as well. I agree with the display-node/phandle comment and will make sure its included for v3. To be honest, it just slipped my memory at the time.
Tony Prisk