Skip to contentSkip to conversation

nodejs: new package

PATCH New Jonathan Liu 2 participants 6 messages Aug 13, 2012 – Aug 26, 2012

lore
Share & tools
lore
#0 lore raw

v4 cover nodejs: new package

Jonathan Liu (2):
python: enable bz2 module for host build
nodejs: new package

 package/Config.in        |  1 +
 package/nodejs/Config.in | 20 +++++++++++++++
 package/nodejs/nodejs.mk | 63 ++++++++++++++++++++++++++++++++++++++++++++++++
 package/python/python.mk |  1 -
 4 files changed, 84 insertions(+), 1 deletion(-)
 create mode 100644 package/nodejs/Config.in
 create mode 100644 package/nodejs/nodejs.mk
Signature · 1 line
1.7.11.3
#1 lore raw

PATCH v4 1/2 python: enable bz2 module for host build

The bz2 module is required for building some Python packages.

---
 package/python/python.mk | 1 -
 1 file changed, 1 deletion(-)
package/python/python.mk +0 -1
index fae4e5c..7b314ab 100644
@@ -27,7 +27,6 @@ HOST_PYTHON_CONF_OPT += 	\
 	--disable-gdbm		\
 	--disable-bsddb		\
 	--disable-test-modules	\
-	--disable-bz2		\
 	--disable-ssl
 
 HOST_PYTHON_MAKE_ENV = \
Signature · 1 line
1.7.11.3
#2 lore raw

PATCH v4 2/2 nodejs: new package

In reply to Jonathan Liu
---
 package/Config.in        |  1 +
 package/nodejs/Config.in | 20 +++++++++++++++
 package/nodejs/nodejs.mk | 63 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 84 insertions(+)
 create mode 100644 package/nodejs/Config.in
 create mode 100644 package/nodejs/nodejs.mk
package/Config.in +1 -0
index f308de7..76c589b 100644
@@ -263,6 +263,7 @@ source "package/xavante/Config.in"
 endmenu
 endif
 source "package/microperl/Config.in"
+source "package/nodejs/Config.in"
 source "package/php/Config.in"
 source "package/python/Config.in"
 if BR2_PACKAGE_PYTHON
package/nodejs/Config.in new file +20 -0
new file mode 100644
index 0000000..52fb03d
@@ -0,0 +1,20 @@
+config BR2_PACKAGE_NODEJS
+	bool "nodejs"
+	help
+	  Event-driven I/O server-side JavaScript environment based on V8.
+
+	  http://nodejs.org/
+
+if BR2_PACKAGE_NODEJS
+
+config BR2_PACKAGE_NODEJS_NPM
+	bool "npm"
+	help
+	  Enable npm (Node Package Manager).
+
+config BR2_PACKAGE_NODEJS_WAF
+	bool "waf"
+	help
+	  Enable node-waf for building native modules.
+
+endif
package/nodejs/nodejs.mk new file +63 -0

63 lines not on this page · raw message

Signature · 1 line
1.7.11.3
#3 lore raw

PATCH v4 2/2 nodejs: new package

Hello Jonathan,

Le Mon, 13 Aug 2012 13:05:50 +1000,
Jonathan Liu <[email protected]> a ?crit :

Quoted 8 lines
---
 package/Config.in        |  1 +
 package/nodejs/Config.in | 20 +++++++++++++++
 package/nodejs/nodejs.mk | 63 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 84 insertions(+)
 create mode 100644 package/nodejs/Config.in
 create mode 100644 package/nodejs/nodejs.mk

nodejs includes V8 for executing the JavaScript code, and V8 generates machine code to provide good performances when executing JavaScript. This means that V8 is architecture dependent: apparently, in deps/v8/, only IA32, x86-64, ARM and MIPS are supported.

However, I don't understand how you select the target architecture or how it is detected. Some comments in the configure script also seem to imply that on ARM, only ARMv7 is supported by V8.

Have you checked this, or did you try only a x86->x86 build?

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#4 lore raw

PATCH v4 2/2 nodejs: new package

Le Sat, 25 Aug 2012 19:15:38 +0200,
Thomas Petazzoni <[email protected]> a ?crit :

Quoted 10 lines

nodejs includes V8 for executing the JavaScript code, and V8 generates machine code to provide good performances when executing JavaScript. This means that V8 is architecture dependent: apparently, in deps/v8/, only IA32, x86-64, ARM and MIPS are supported.

However, I don't understand how you select the target architecture or how it is detected. Some comments in the configure script also seem to imply that on ARM, only ARMv7 is supported by V8.

Have you checked this, or did you try only a x86->x86 build?

And also, it doesn't work here (Linaro 2012.02 toolchain, ARM) :

Quoted 1 line
Quoted 1 line
Quoted 1 line

nodejs 0.8.6 Configuring

(cd /home/thomas/projets/buildroot/output/build/nodejs-0.8.6; PATH="/home/thomas/projets/buildroot/output/host/bin:/home/thomas/projets/buildroot/output/host/usr/bin:/home/thomas/projets/buildroot/output/host/usr/sbin/:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/thomas/sys/bin" AR="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-ar" AS="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-as" LD="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-ld" NM="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-nm" CC="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-gcc" GCC="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-gcc" CPP="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-cpp" CXX="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-g++" FC="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-gfortran" RANLIB="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-ranlib" STRIP="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-strip" OBJCOPY="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-objcopy" OBJDUMP="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" FC_FOR_BUILD="/usr/bin/ld" LD_FOR_BUILD="/usr/bin/ld" CFLAGS_FOR_BUILD="-O2 -I/home/thomas/projets/buildroot/output/host/include -I/home/thomas/projets/buildroot/output/host/usr/include" CXXFLAGS_FOR_BUILD="-I/home/thomas/projets/buildroot/output/host/include -I/home/thomas/projets/buildroot/output/host/usr/include" LDFLAGS_FOR_BUILD="-L/home/thomas/projets/buildroot/output/host/lib -L/home/thomas/projets/buildroot/output/host/usr/lib -Wl,-rpath,/home/thomas/projets/buildroot/output/host/usr/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-as" DEFAULT_LINKER="/home/thomas/projets/buildroot/output/host/usr/bin/arm-linux-gnueabi-ld" CFLAGS=" -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CXXFLAGS=" -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" LDFLAGS="" FCFLAGS="" PKG_CONFIG="/home/thomas/projets/buildroot/output/host/usr/bin/pkg-config" PERLLIB="/home/thomas/projets/buildroot/output/host/usr/lib/perl" STAGING_DIR="/home/thomas/projets/buildroot/output/host/usr/arm-unknown-linux-gnueabi/sysroot" PATH="/home/thomas/projets/buildroot/output/host/bin:/home/thomas/projets/buildroot/output/host/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/thomas/sys/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/thomas/sys/bin" ./configure --prefix=/usr --without-snapshot --without-ssl --without-dtrace --without-etw )
{ 'target_defaults': { 'cflags': [],

                       'default_configuration': 'Release',
                       'defines': [],
                       'include_dirs': [],
                       'libraries': []},
  'variables': { 'armv7': 1,
                 'host_arch': 'arm',
                 'node_install_npm': 'true',
                 'node_install_waf': 'true',
                 'node_prefix': '/usr',
                 'node_shared_openssl': 'false',
                 'node_shared_v8': 'false',
                 'node_shared_zlib': 'false',
                 'node_use_dtrace': 'false',
                 'node_use_etw': 'false',
                 'node_use_openssl': 'false',
                 'target_arch': 'arm',
                 'v8_no_strict_aliasing': 1,
                 'v8_use_arm_eabi_hardfloat': 'false',
                 'v8_use_snapshot': 'false'}}

creating ./config.gypi
creating ./config.mk
Traceback (most recent call last):
File "tools/gyp_node", line 58, in <module>
run_gyp(gyp_args)
File "tools/gyp_node", line 18, in run_gyp
rc = gyp.main(args)
File "./tools/gyp/pylib/gyp/__init__.py", line 471, in main
options.circular_check)
File "./tools/gyp/pylib/gyp/__init__.py", line 111, in Load
depth, generator_input_info, check, circular_check)
File "./tools/gyp/pylib/gyp/input.py", line 2378, in Load
depth, check)
File "./tools/gyp/pylib/gyp/input.py", line 430, in LoadTargetBuildFile
includes, depth, check)
File "./tools/gyp/pylib/gyp/input.py", line 384, in LoadTargetBuildFile
build_file_data, PHASE_EARLY, variables, build_file_path)
File "./tools/gyp/pylib/gyp/input.py", line 1027, in ProcessVariablesAndConditionsInDict
ProcessConditionsInDict(the_dict, phase, variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 904, in ProcessConditionsInDict
variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 1053, in ProcessVariablesAndConditionsInDict
build_file)
File "./tools/gyp/pylib/gyp/input.py", line 1068, in ProcessVariablesAndConditionsInList
ProcessVariablesAndConditionsInDict(item, phase, variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 1053, in ProcessVariablesAndConditionsInDict
build_file)
File "./tools/gyp/pylib/gyp/input.py", line 1068, in ProcessVariablesAndConditionsInList
ProcessVariablesAndConditionsInDict(item, phase, variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 1027, in ProcessVariablesAndConditionsInDict
ProcessConditionsInDict(the_dict, phase, variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 904, in ProcessConditionsInDict
variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 1027, in ProcessVariablesAndConditionsInDict
ProcessConditionsInDict(the_dict, phase, variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 904, in ProcessConditionsInDict
variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 1027, in ProcessVariablesAndConditionsInDict
ProcessConditionsInDict(the_dict, phase, variables, build_file)
File "./tools/gyp/pylib/gyp/input.py", line 885, in ProcessConditionsInDict

    if eval(ast_code, {'__builtins__': None}, variables):

File "<string>", line 1, in <module>
NameError: name 'arm_neon' is not defined while evaluating condition 'arm_neon!=1 and arm_fpu!="vfpv3" and arm_fpu!="vfpv3-d16"' in /home/thomas/projets/buildroot/output/build/nodejs-0.8.6/deps/v8/tools/gyp/v8.gyp while loading dependencies of /home/thomas/projets/buildroot/output/build/nodejs-0.8.6/node.gyp while trying to load /home/thomas/projets/buildroot/output/build/nodejs-0.8.6/node.gyp

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#5 lore raw

PATCH v4 2/2 nodejs: new package

In reply to Thomas Petazzoni

Hi Thomas,

Quoted 10 lines · Thomas Petazzoni

nodejs includes V8 for executing the JavaScript code, and V8 generates machine code to provide good performances when executing JavaScript. This means that V8 is architecture dependent: apparently, in deps/v8/, only IA32, x86-64, ARM and MIPS are supported.

However, I don't understand how you select the target architecture or how it is detected. Some comments in the configure script also seem to imply that on ARM, only ARMv7 is supported by V8.

Have you checked this, or did you try only a x86->x86 build?

I have mainly been testing x86-64->x86 builds.
I tried doing a x86-64->qemu-arm-versatile build and it seems to boot and run node.js properly (I am using 2012.08-rc2 with CodeSourcery ARM 2011.09 external toolchain).
Perhaps it needs a patch to build on an ARM host
(https://gist.github.com/1608607 might help).

Also, I was not able to get the qemu arm-versatile build to boot using ext2 image and the qemu command in board/qemu/arm-versatile/readme.txt. I get "Cannot open root device or unknown-block(0,0)" when it tries to open /dev/sda.
Booting using a cpio initrd image works though.
Anything special I need to boot using ext2 image with ARM in qemu?

Regards,
Jonathan