Skip to contentSkip to conversation

linux-libc-headers: Add linux-libc-headers_3.3.bb.

PATCH New Elvis Dowson 1 participant 3 messages Aug 21, 2012 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 linux-libc-headers: Add linux-libc-headers_3.3.bb.

This commit adds linux-libc-headers_3.3.bb for linux-xilinx kernel 3.3.

---
 .../linux-libc-headers/linux-libc-headers_3.3.bb   |    6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 recipes-kernel/linux-libc-headers/linux-libc-headers_3.3.bb
recipes-kernel/linux-libc-headers/linux-libc-headers_3.3.bb new file +6 -0
new file mode 100644
index 0000000..6f6cb9f
@@ -0,0 +1,6 @@
+require recipes-kernel/linux-libc-headers/linux-libc-headers.inc
+
+PR = "r0"
+
+SRC_URI[md5sum] = "98a6cdd7d082b7ea72df9c89842bac74"
+SRC_URI[sha256sum] = "8fd669b4e48181b8d44644a45bf421a84bb8d5ec273ef36349796443e442f333"
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 2/3 linux-xilinx-3.0: Add new recipe for linux-xilinx v3.0.0 kernel.

This commit adds a new recipe for the linux-xilinx v3.0.0 kernel, and includes the following features:
* support for Xilinx ML507 development board
* support for Xilinx Virtex 5 PowerPC440 processor
* support for console output on a LCD display using the DVI port
* support for using a ramdisk and booting to a bash prompt
* support for xps-uartlite-1.01.a, ttyUL0
* support for xps-ethernetlite-4.00.a, 10/100 Mbps ethernet interface

The ramdisk size has been set to 32768 kilobytes. This value can be changed by modifying the supplied kernel deconfig_3.0.0

The linux-xilinx v3.0.0 kernel has been tested using a hardware project created using Xilinx EDK 13.1.

---
 ...l507.dts-Update-device-tree-to-version-ge.patch |  828 ++++++++++
 ...l507.dts-Update-bootargs-to-use-ramdisk-a.patch |   73 +
 .../linux/linux-xilinx-3.0/virtex5/defconfig_3.0.0 | 1652 ++++++++++++++++++++
 recipes-kernel/linux/linux-xilinx_3.0.bb           |   25 +
 4 files changed, 2578 insertions(+)
 create mode 100644 recipes-kernel/linux/linux-xilinx-3.0/virtex5/0001-virtex440-ml507.dts-Update-device-tree-to-version-ge.patch
 create mode 100644 recipes-kernel/linux/linux-xilinx-3.0/virtex5/0002-virtex440-ml507.dts-Update-bootargs-to-use-ramdisk-a.patch
 create mode 100644 recipes-kernel/linux/linux-xilinx-3.0/virtex5/defconfig_3.0.0
 create mode 100644 recipes-kernel/linux/linux-xilinx_3.0.bb
recipes-kernel/linux/linux-xilinx-3.0/virtex5/0001-virtex440-ml507.dts-Update-device-tree-to-version-ge.patch new file +828 -0
new file mode 100644
index 0000000..0710f6c
@@ -0,0 +1,828 @@
+From d543cb700dc4c29369095b6099f6c0c416092e1c Mon Sep 17 00:00:00 2001
+From: Elvis Dowson <[email protected]>
+Date: Tue, 21 Aug 2012 18:56:18 +0400
+Subject: [PATCH 1/2] virtex440-ml507.dts: Update device tree to version
+ generated by Xilinx EDK 13.1.
+
+This commit updates the virtex-ml507.dts device tree file version
+automatically generated by Xilinx EDK 13.1.
+
+The bootargs are set as follows:
+console=ttyS0,115200 ip=on root=/dev/xsa2 rw
+
+Signed-off-by: Elvis Dowson <[email protected]>
+---
+ arch/powerpc/boot/dts/virtex440-ml507.dts |  796 +++++++++++++++--------------
+ 1 file changed, 416 insertions(+), 380 deletions(-)
+
+diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
+index 9cf6081..1d60466 100644
+--- a/arch/powerpc/boot/dts/virtex440-ml507.dts
++++ b/arch/powerpc/boot/dts/virtex440-ml507.dts
+@@ -13,387 +13,423 @@
+  * Device Tree Generator version: 1.1
+  *
+  * CAUTION: This file is automatically generated by libgen.
+- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
++ * Version: Xilinx EDK 13.1 EDK_O.40d
+  *
+  * XPS project directory: ml507_ppc440_emb_ref
+  */
+-
+-/dts-v1/;
+-/ {
+-	#address-cells = <1>;
+-	#size-cells = <1>;
+-	compatible = "xlnx,virtex440";
+-	dcr-parent = <&ppc440_0>;
+-	model = "testing";
+-	DDR2_SDRAM: memory@0 {
+-		device_type = "memory";
+-		reg = < 0x0 0x10000000 >;
+-	} ;
+-	chosen {
+-		bootargs = "console=ttyS0 ip=on root=/dev/ram";
+-		linux,stdout-path = "/plb@0/serial@83e00000";
+-	} ;
+-	cpus {
+-		#address-cells = <1>;
+-		#cpus = <0x1>;
+-		#size-cells = <0>;
+-		ppc440_0: cpu@0 {
+-			#address-cells = <1>;
+-			#size-cells = <1>;
+-			clock-frequency = "";
+-			compatible = "PowerPC,440", "ibm,ppc440";
+-			d-cache-line-size = <0x20>;
+-			d-cache-size = <0x8000>;
+-			dcr-access-method = "native";
+-			dcr-controller ;
+-			device_type = "cpu";
+-			i-cache-line-size = <0x20>;
+-			i-cache-size = <0x8000>;
+-			model = "PowerPC,440";
+-			reg = <0>;
++
++/dts-v1/;
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	compatible = "xlnx,virtex440", "xlnx,virtex";
++	dcr-parent = <&ppc440_0>;
++	model = "testing";
++	DDR2_SDRAM: memory@0 {
++		device_type = "memory";
++		reg = < 0x0 0x10000000 >;
++	} ;
++	aliases {
++		ethernet0 = &Ethernet_MAC;
++		serial0 = &RS232_Uart_1;
++	} ;
++	chosen {
++		bootargs = "console=ttyS0,115200 ip=on root=/dev/xsa2 rw";
++		linux,stdout-path = "/plb@0/serial@84000000";
++	} ;
++	cpus {
++		#address-cells = <1>;
++		#cpus = <0x1>;
++		#size-cells = <0>;
++		ppc440_0: cpu@0 {
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clock-frequency = <400000000>;
++			compatible = "PowerPC,440", "ibm,ppc440";
++			d-cache-line-size = <0x20>;
++			d-cache-size = <0x8000>;
++			dcr-access-method = "native";
++			dcr-controller ;
++			device_type = "cpu";
++			i-cache-line-size = <0x20>;
++			i-cache-size = <0x8000>;
++			model = "PowerPC,440";
++			reg = <0>;
+ 			timebase-frequency = <400000000>;
+-			xlnx,apu-control = <0x1>;
+-			xlnx,apu-udi-0 = <0x0>;
+-			xlnx,apu-udi-1 = <0x0>;
+-			xlnx,apu-udi-10 = <0x0>;
+-			xlnx,apu-udi-11 = <0x0>;
+-			xlnx,apu-udi-12 = <0x0>;
+-			xlnx,apu-udi-13 = <0x0>;
+-			xlnx,apu-udi-14 = <0x0>;
+-			xlnx,apu-udi-15 = <0x0>;
+-			xlnx,apu-udi-2 = <0x0>;
+-			xlnx,apu-udi-3 = <0x0>;
+-			xlnx,apu-udi-4 = <0x0>;
+-			xlnx,apu-udi-5 = <0x0>;
+-			xlnx,apu-udi-6 = <0x0>;
+-			xlnx,apu-udi-7 = <0x0>;
+-			xlnx,apu-udi-8 = <0x0>;
+-			xlnx,apu-udi-9 = <0x0>;
+-			xlnx,dcr-autolock-enable = <0x1>;
+-			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
+-			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
+-			xlnx,dcu-rd-touch-plb-prio = <0x0>;
+-			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
+-			xlnx,dcu-wr-flush-plb-prio = <0x0>;
+-			xlnx,dcu-wr-store-plb-prio = <0x0>;
+-			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
+-			xlnx,dma0-control = <0x0>;
+-			xlnx,dma0-plb-prio = <0x0>;
+-			xlnx,dma0-rxchannelctrl = <0x1010000>;
+-			xlnx,dma0-rxirqtimer = <0x3ff>;
+-			xlnx,dma0-txchannelctrl = <0x1010000>;
+-			xlnx,dma0-txirqtimer = <0x3ff>;
+-			xlnx,dma1-control = <0x0>;
+-			xlnx,dma1-plb-prio = <0x0>;
+-			xlnx,dma1-rxchannelctrl = <0x1010000>;
+-			xlnx,dma1-rxirqtimer = <0x3ff>;
+-			xlnx,dma1-txchannelctrl = <0x1010000>;
+-			xlnx,dma1-txirqtimer = <0x3ff>;
+-			xlnx,dma2-control = <0x0>;
+-			xlnx,dma2-plb-prio = <0x0>;
+-			xlnx,dma2-rxchannelctrl = <0x1010000>;
+-			xlnx,dma2-rxirqtimer = <0x3ff>;
+-			xlnx,dma2-txchannelctrl = <0x1010000>;
+-			xlnx,dma2-txirqtimer = <0x3ff>;
+-			xlnx,dma3-control = <0x0>;
+-			xlnx,dma3-plb-prio = <0x0>;
+-			xlnx,dma3-rxchannelctrl = <0x1010000>;
+-			xlnx,dma3-rxirqtimer = <0x3ff>;
+-			xlnx,dma3-txchannelctrl = <0x1010000>;
+-			xlnx,dma3-txirqtimer = <0x3ff>;
+-			xlnx,endian-reset = <0x0>;
+-			xlnx,generate-plb-timespecs = <0x1>;
+-			xlnx,icu-rd-fetch-plb-prio = <0x0>;
+-			xlnx,icu-rd-spec-plb-prio = <0x0>;
+-			xlnx,icu-rd-touch-plb-prio = <0x0>;
+-			xlnx,interconnect-imask = <0xffffffff>;
+-			xlnx,mplb-allow-lock-xfer = <0x1>;
+-			xlnx,mplb-arb-mode = <0x0>;
+-			xlnx,mplb-awidth = <0x20>;
+-			xlnx,mplb-counter = <0x500>;
+-			xlnx,mplb-dwidth = <0x80>;
+-			xlnx,mplb-max-burst = <0x8>;
+-			xlnx,mplb-native-dwidth = <0x80>;
+-			xlnx,mplb-p2p = <0x0>;
+-			xlnx,mplb-prio-dcur = <0x2>;
+-			xlnx,mplb-prio-dcuw = <0x3>;
+-			xlnx,mplb-prio-icu = <0x4>;
+-			xlnx,mplb-prio-splb0 = <0x1>;
+-			xlnx,mplb-prio-splb1 = <0x0>;
+-			xlnx,mplb-read-pipe-enable = <0x1>;
+-			xlnx,mplb-sync-tattribute = <0x0>;
+-			xlnx,mplb-wdog-enable = <0x1>;
+-			xlnx,mplb-write-pipe-enable = <0x1>;
+-			xlnx,mplb-write-post-enable = <0x1>;
+-			xlnx,num-dma = <0x1>;
+-			xlnx,pir = <0xf>;
+-			xlnx,ppc440mc-addr-base = <0x0>;
+-			xlnx,ppc440mc-addr-high = <0xfffffff>;
+-			xlnx,ppc440mc-arb-mode = <0x0>;
+-			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
+-			xlnx,ppc440mc-control = <0xf810008f>;
+-			xlnx,ppc440mc-max-burst = <0x8>;
+-			xlnx,ppc440mc-prio-dcur = <0x2>;
+-			xlnx,ppc440mc-prio-dcuw = <0x3>;
+-			xlnx,ppc440mc-prio-icu = <0x4>;
+-			xlnx,ppc440mc-prio-splb0 = <0x1>;
+-			xlnx,ppc440mc-prio-splb1 = <0x0>;
+-			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
+-			xlnx,ppcdm-asyncmode = <0x0>;
+-			xlnx,ppcds-asyncmode = <0x0>;
+-			xlnx,user-reset = <0x0>;
+-			DMA0: sdma@80 {
+-				compatible = "xlnx,ll-dma-1.00.a";
+-				dcr-reg = < 0x80 0x11 >;
+-				interrupt-parent = <&xps_intc_0>;
+-				interrupts = < 10 2 11 2 >;
+-			} ;
+-		} ;
+-	} ;
+-	plb_v46_0: plb@0 {
+-		#address-cells = <1>;
+-		#size-cells = <1>;
+-		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+-		ranges ;
+-		DIP_Switches_8Bit: gpio@81460000 {
+-			compatible = "xlnx,xps-gpio-1.00.a";
+-			interrupt-parent = <&xps_intc_0>;
+-			interrupts = < 7 2 >;
+-			reg = < 0x81460000 0x10000 >;
+-			xlnx,all-inputs = <0x1>;
+-			xlnx,all-inputs-2 = <0x0>;
+-			xlnx,dout-default = <0x0>;
+-			xlnx,dout-default-2 = <0x0>;
+-			xlnx,family = "virtex5";
+-			xlnx,gpio-width = <0x8>;
+-			xlnx,interrupt-present = <0x1>;
+-			xlnx,is-bidir = <0x1>;
+-			xlnx,is-bidir-2 = <0x1>;
+-			xlnx,is-dual = <0x0>;
+-			xlnx,tri-default = <0xffffffff>;
+-			xlnx,tri-default-2 = <0xffffffff>;
+-		} ;
+-		FLASH: flash@fc000000 {
+-			bank-width = <2>;
+-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+-			reg = < 0xfc000000 0x2000000 >;
+-			xlnx,family = "virtex5";
+-			xlnx,include-datawidth-matching-0 = <0x1>;
+-			xlnx,include-datawidth-matching-1 = <0x0>;
+-			xlnx,include-datawidth-matching-2 = <0x0>;
+-			xlnx,include-datawidth-matching-3 = <0x0>;
+-			xlnx,include-negedge-ioregs = <0x0>;
+-			xlnx,include-plb-ipif = <0x1>;
+-			xlnx,include-wrbuf = <0x1>;
+-			xlnx,max-mem-width = <0x10>;
+-			xlnx,mch-native-dwidth = <0x20>;
+-			xlnx,mch-plb-clk-period-ps = <0x2710>;
+-			xlnx,mch-splb-awidth = <0x20>;
+-			xlnx,mch0-accessbuf-depth = <0x10>;
+-			xlnx,mch0-protocol = <0x0>;
+-			xlnx,mch0-rddatabuf-depth = <0x10>;
+-			xlnx,mch1-accessbuf-depth = <0x10>;
+-			xlnx,mch1-protocol = <0x0>;
+-			xlnx,mch1-rddatabuf-depth = <0x10>;
+-			xlnx,mch2-accessbuf-depth = <0x10>;
+-			xlnx,mch2-protocol = <0x0>;
+-			xlnx,mch2-rddatabuf-depth = <0x10>;
+-			xlnx,mch3-accessbuf-depth = <0x10>;
+-			xlnx,mch3-protocol = <0x0>;
+-			xlnx,mch3-rddatabuf-depth = <0x10>;
+-			xlnx,mem0-width = <0x10>;
+-			xlnx,mem1-width = <0x20>;
+-			xlnx,mem2-width = <0x20>;
+-			xlnx,mem3-width = <0x20>;
+-			xlnx,num-banks-mem = <0x1>;
+-			xlnx,num-channels = <0x2>;
+-			xlnx,priority-mode = <0x0>;
+-			xlnx,synch-mem-0 = <0x0>;
+-			xlnx,synch-mem-1 = <0x0>;
+-			xlnx,synch-mem-2 = <0x0>;
+-			xlnx,synch-mem-3 = <0x0>;
+-			xlnx,synch-pipedelay-0 = <0x2>;
+-			xlnx,synch-pipedelay-1 = <0x2>;
+-			xlnx,synch-pipedelay-2 = <0x2>;
+-			xlnx,synch-pipedelay-3 = <0x2>;
+-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+-			xlnx,thzce-ps-mem-0 = <0x88b8>;
+-			xlnx,thzce-ps-mem-1 = <0x1b58>;
+-			xlnx,thzce-ps-mem-2 = <0x1b58>;
+-			xlnx,thzce-ps-mem-3 = <0x1b58>;
+-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+-			xlnx,tlzwe-ps-mem-1 = <0x0>;
+-			xlnx,tlzwe-ps-mem-2 = <0x0>;
+-			xlnx,tlzwe-ps-mem-3 = <0x0>;
+-			xlnx,twc-ps-mem-0 = <0x2af8>;
+-			xlnx,twc-ps-mem-1 = <0x3a98>;
+-			xlnx,twc-ps-mem-2 = <0x3a98>;
+-			xlnx,twc-ps-mem-3 = <0x3a98>;
+-			xlnx,twp-ps-mem-0 = <0x11170>;
+-			xlnx,twp-ps-mem-1 = <0x2ee0>;
+-			xlnx,twp-ps-mem-2 = <0x2ee0>;
+-			xlnx,twp-ps-mem-3 = <0x2ee0>;
+-			xlnx,xcl0-linesize = <0x4>;
+-			xlnx,xcl0-writexfer = <0x1>;
+-			xlnx,xcl1-linesize = <0x4>;
+-			xlnx,xcl1-writexfer = <0x1>;
+-			xlnx,xcl2-linesize = <0x4>;
+-			xlnx,xcl2-writexfer = <0x1>;
+-			xlnx,xcl3-linesize = <0x4>;
+-			xlnx,xcl3-writexfer = <0x1>;
+-		} ;
+-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+-			#address-cells = <1>;
+-			#size-cells = <1>;
+-			compatible = "xlnx,compound";
+-			ethernet@81c00000 {
+-				compatible = "xlnx,xps-ll-temac-1.01.b";
+-				device_type = "network";
+-				interrupt-parent = <&xps_intc_0>;
+-				interrupts = < 5 2 >;
+-				llink-connected = <&DMA0>;
+-				local-mac-address = [ 02 00 00 00 00 00 ];
+-				reg = < 0x81c00000 0x40 >;
+-				xlnx,bus2core-clk-ratio = <0x1>;
+-				xlnx,phy-type = <0x1>;
+-				xlnx,phyaddr = <0x1>;
+-				xlnx,rxcsum = <0x1>;
+-				xlnx,rxfifo = <0x1000>;
+-				xlnx,temac-type = <0x0>;
+-				xlnx,txcsum = <0x1>;
+-				xlnx,txfifo = <0x1000>;
+-			} ;
+-		} ;
+-		IIC_EEPROM: i2c@81600000 {
+-			compatible = "xlnx,xps-iic-2.00.a";
+-			interrupt-parent = <&xps_intc_0>;
+-			interrupts = < 6 2 >;
+-			reg = < 0x81600000 0x10000 >;
+-			xlnx,clk-freq = <0x5f5e100>;
+-			xlnx,family = "virtex5";
+-			xlnx,gpo-width = <0x1>;
+-			xlnx,iic-freq = <0x186a0>;
+-			xlnx,scl-inertial-delay = <0x0>;
+-			xlnx,sda-inertial-delay = <0x0>;
+-			xlnx,ten-bit-adr = <0x0>;
+-		} ;
+-		LEDs_8Bit: gpio@81400000 {
+-			compatible = "xlnx,xps-gpio-1.00.a";
+-			reg = < 0x81400000 0x10000 >;
+-			xlnx,all-inputs = <0x0>;
+-			xlnx,all-inputs-2 = <0x0>;
+-			xlnx,dout-default = <0x0>;
+-			xlnx,dout-default-2 = <0x0>;
+-			xlnx,family = "virtex5";
+-			xlnx,gpio-width = <0x8>;
+-			xlnx,interrupt-present = <0x0>;
+-			xlnx,is-bidir = <0x1>;
+-			xlnx,is-bidir-2 = <0x1>;
+-			xlnx,is-dual = <0x0>;
+-			xlnx,tri-default = <0xffffffff>;
+-			xlnx,tri-default-2 = <0xffffffff>;
+-		} ;
+-		LEDs_Positions: gpio@81420000 {
+-			compatible = "xlnx,xps-gpio-1.00.a";
+-			reg = < 0x81420000 0x10000 >;
+-			xlnx,all-inputs = <0x0>;
+-			xlnx,all-inputs-2 = <0x0>;
+-			xlnx,dout-default = <0x0>;
+-			xlnx,dout-default-2 = <0x0>;
+-			xlnx,family = "virtex5";
+-			xlnx,gpio-width = <0x5>;
+-			xlnx,interrupt-present = <0x0>;
+-			xlnx,is-bidir = <0x1>;
+-			xlnx,is-bidir-2 = <0x1>;
+-			xlnx,is-dual = <0x0>;
+-			xlnx,tri-default = <0xffffffff>;
+-			xlnx,tri-default-2 = <0xffffffff>;
+-		} ;
+-		Push_Buttons_5Bit: gpio@81440000 {
+-			compatible = "xlnx,xps-gpio-1.00.a";
+-			interrupt-parent = <&xps_intc_0>;
+-			interrupts = < 8 2 >;
+-			reg = < 0x81440000 0x10000 >;
+-			xlnx,all-inputs = <0x1>;
+-			xlnx,all-inputs-2 = <0x0>;
+-			xlnx,dout-default = <0x0>;
+-			xlnx,dout-default-2 = <0x0>;
+-			xlnx,family = "virtex5";
+-			xlnx,gpio-width = <0x5>;
+-			xlnx,interrupt-present = <0x1>;
+-			xlnx,is-bidir = <0x1>;
+-			xlnx,is-bidir-2 = <0x1>;
+-			xlnx,is-dual = <0x0>;
+-			xlnx,tri-default = <0xffffffff>;
+-			xlnx,tri-default-2 = <0xffffffff>;
+-		} ;
+-		RS232_Uart_1: serial@83e00000 {
+-			clock-frequency = <100000000>;
+-			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550";
+-			current-speed = <9600>;
+-			device_type = "serial";
+-			interrupt-parent = <&xps_intc_0>;
+-			interrupts = < 9 2 >;
+-			reg = < 0x83e00000 0x10000 >;
+-			reg-offset = <0x1003>;
+-			reg-shift = <2>;
+-			xlnx,family = "virtex5";
+-			xlnx,has-external-rclk = <0x0>;
+-			xlnx,has-external-xin = <0x0>;
+-			xlnx,is-a-16550 = <0x1>;
+-		} ;
+-		SysACE_CompactFlash: sysace@83600000 {
+-			compatible = "xlnx,xps-sysace-1.00.a";
+-			interrupt-parent = <&xps_intc_0>;
+-			interrupts = < 4 2 >;
+-			reg = < 0x83600000 0x10000 >;
+-			xlnx,family = "virtex5";
+-			xlnx,mem-width = <0x10>;
+-		} ;
+-		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+-			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+-			reg = < 0xffff0000 0x10000 >;
+-			xlnx,family = "virtex5";
+-		} ;
+-		xps_intc_0: interrupt-controller@81800000 {
+-			#interrupt-cells = <0x2>;
+-			compatible = "xlnx,xps-intc-1.00.a";
+-			interrupt-controller ;
+-			reg = < 0x81800000 0x10000 >;
+-			xlnx,num-intr-inputs = <0xc>;
+-		} ;
+-		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
+-			compatible = "xlnx,xps-timebase-wdt-1.00.b";
+-			interrupt-parent = <&xps_intc_0>;
+-			interrupts = < 2 0 1 2 >;
+-			reg = < 0x83a00000 0x10000 >;
+-			xlnx,family = "virtex5";
+-			xlnx,wdt-enable-once = <0x0>;
+-			xlnx,wdt-interval = <0x1e>;
+-		} ;
+-		xps_timer_1: timer@83c00000 {
+-			compatible = "xlnx,xps-timer-1.00.a";
+-			interrupt-parent = <&xps_intc_0>;
+-			interrupts = < 3 2 >;
+-			reg = < 0x83c00000 0x10000 >;
+-			xlnx,count-width = <0x20>;
+-			xlnx,family = "virtex5";
+-			xlnx,gen0-assert = <0x1>;
+-			xlnx,gen1-assert = <0x1>;
+-			xlnx,one-timer-only = <0x1>;
+-			xlnx,trig0-assert = <0x1>;
+-			xlnx,trig1-assert = <0x1>;
+-		} ;
+-	} ;
+-}  ;
++			xlnx,apu-control = <0x2000>;
++			xlnx,apu-udi-0 = <0x0>;
++			xlnx,apu-udi-1 = <0x0>;
++			xlnx,apu-udi-10 = <0x0>;
++			xlnx,apu-udi-11 = <0x0>;
++			xlnx,apu-udi-12 = <0x0>;
++			xlnx,apu-udi-13 = <0x0>;
++			xlnx,apu-udi-14 = <0x0>;
++			xlnx,apu-udi-15 = <0x0>;
++			xlnx,apu-udi-2 = <0x0>;
++			xlnx,apu-udi-3 = <0x0>;
++			xlnx,apu-udi-4 = <0x0>;
++			xlnx,apu-udi-5 = <0x0>;
++			xlnx,apu-udi-6 = <0x0>;
++			xlnx,apu-udi-7 = <0x0>;
++			xlnx,apu-udi-8 = <0x0>;
++			xlnx,apu-udi-9 = <0x0>;
++			xlnx,dcr-autolock-enable = <0x1>;
++			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
++			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
++			xlnx,dcu-rd-touch-plb-prio = <0x0>;
++			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
++			xlnx,dcu-wr-flush-plb-prio = <0x0>;
++			xlnx,dcu-wr-store-plb-prio = <0x0>;
++			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
++			xlnx,dma0-control = <0x0>;
++			xlnx,dma0-plb-prio = <0x0>;
++			xlnx,dma0-rxchannelctrl = <0x1010000>;
++			xlnx,dma0-rxirqtimer = <0x3ff>;
++			xlnx,dma0-txchannelctrl = <0x1010000>;
++			xlnx,dma0-txirqtimer = <0x3ff>;
++			xlnx,dma1-control = <0x0>;
++			xlnx,dma1-plb-prio = <0x0>;
++			xlnx,dma1-rxchannelctrl = <0x1010000>;
++			xlnx,dma1-rxirqtimer = <0x3ff>;
++			xlnx,dma1-txchannelctrl = <0x1010000>;
++			xlnx,dma1-txirqtimer = <0x3ff>;
++			xlnx,dma2-control = <0x0>;
++			xlnx,dma2-plb-prio = <0x0>;
++			xlnx,dma2-rxchannelctrl = <0x1010000>;
++			xlnx,dma2-rxirqtimer = <0x3ff>;
++			xlnx,dma2-txchannelctrl = <0x1010000>;
++			xlnx,dma2-txirqtimer = <0x3ff>;
++			xlnx,dma3-control = <0x0>;
++			xlnx,dma3-plb-prio = <0x0>;
++			xlnx,dma3-rxchannelctrl = <0x1010000>;
++			xlnx,dma3-rxirqtimer = <0x3ff>;
++			xlnx,dma3-txchannelctrl = <0x1010000>;
++			xlnx,dma3-txirqtimer = <0x3ff>;
++			xlnx,endian-reset = <0x0>;
++			xlnx,generate-plb-timespecs = <0x1>;
++			xlnx,icu-rd-fetch-plb-prio = <0x0>;
++			xlnx,icu-rd-spec-plb-prio = <0x0>;
++			xlnx,icu-rd-touch-plb-prio = <0x0>;
++			xlnx,interconnect-imask = <0xffffffff>;
++			xlnx,mplb-allow-lock-xfer = <0x1>;
++			xlnx,mplb-arb-mode = <0x0>;
++			xlnx,mplb-awidth = <0x20>;
++			xlnx,mplb-counter = <0x500>;
++			xlnx,mplb-dwidth = <0x80>;
++			xlnx,mplb-max-burst = <0x8>;
++			xlnx,mplb-native-dwidth = <0x80>;
++			xlnx,mplb-p2p = <0x0>;
++			xlnx,mplb-prio-dcur = <0x2>;
++			xlnx,mplb-prio-dcuw = <0x3>;
++			xlnx,mplb-prio-icu = <0x4>;
++			xlnx,mplb-prio-splb0 = <0x1>;
++			xlnx,mplb-prio-splb1 = <0x0>;
++			xlnx,mplb-read-pipe-enable = <0x1>;
++			xlnx,mplb-sync-tattribute = <0x0>;
++			xlnx,mplb-wdog-enable = <0x1>;
++			xlnx,mplb-write-pipe-enable = <0x1>;
++			xlnx,mplb-write-post-enable = <0x1>;
++			xlnx,num-dma = <0x0>;
++			xlnx,pir = <0xf>;
++			xlnx,ppc440mc-addr-base = <0x0>;
++			xlnx,ppc440mc-addr-high = <0xfffffff>;
++			xlnx,ppc440mc-arb-mode = <0x0>;
++			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
++			xlnx,ppc440mc-control = <0xf810008f>;
++			xlnx,ppc440mc-max-burst = <0x8>;
++			xlnx,ppc440mc-prio-dcur = <0x2>;
++			xlnx,ppc440mc-prio-dcuw = <0x3>;
++			xlnx,ppc440mc-prio-icu = <0x4>;
++			xlnx,ppc440mc-prio-splb0 = <0x1>;
++			xlnx,ppc440mc-prio-splb1 = <0x0>;
++			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
++			xlnx,ppcdm-asyncmode = <0x0>;
++			xlnx,ppcds-asyncmode = <0x0>;
++			xlnx,user-reset = <0x0>;
++		} ;
++	} ;
++	plb_v46_0: plb@0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "xlnx,plb-v46-1.05.a", "xlnx,plb-v46-1.00.a", "simple-bus";
++		DIP_Switches_8Bit: gpio@81460000 {
++			compatible = "xlnx,xps-gpio-2.00.a", "xlnx,xps-gpio-1.00.a";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 10 2 >;
++			reg = < 0x81460000 0x10000 >;
++			xlnx,all-inputs = <0x1>;
++			xlnx,all-inputs-2 = <0x0>;
++			xlnx,dout-default = <0x0>;
++			xlnx,dout-default-2 = <0x0>;
++			xlnx,family = "virtex5";
++			xlnx,gpio-width = <0x8>;
++			xlnx,gpio2-width = <0x20>;
++			xlnx,interrupt-present = <0x1>;
++			xlnx,is-dual = <0x0>;
++			xlnx,tri-default = <0xffffffff>;
++			xlnx,tri-default-2 = <0xffffffff>;
++		} ;
++		Ethernet_MAC: ethernet@81000000 {
++			compatible = "xlnx,xps-ethernetlite-4.00.a", "xlnx,xps-ethernetlite-1.00.a";
++			device_type = "network";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 5 0 >;
++			local-mac-address = [ 00 0a 35 01 a5 00 ];
++			phy-handle = <&phy0>;
++			reg = < 0x81000000 0x10000 >;
++			xlnx,duplex = <0x1>;
++			xlnx,family = "virtex5";
++			xlnx,include-global-buffers = <0x0>;
++			xlnx,include-internal-loopback = <0x0>;
++			xlnx,include-mdio = <0x1>;
++			xlnx,rx-ping-pong = <0x0>;
++			xlnx,tx-ping-pong = <0x0>;
++			mdio {
++				#address-cells = <1>;
++				#size-cells = <0>;
++				phy0: phy@7 {
++					compatible = "marvell,88e1111";
++					device_type = "ethernet-phy";
++					reg = <7>;
++				} ;
++			} ;
++		} ;
++		FLASH: flash@8c000000 {
++			bank-width = <2>;
++			compatible = "xlnx,xps-mch-emc-3.01.a", "cfi-flash";
++			reg = < 0x8c000000 0x2000000 >;
++			xlnx,family = "virtex5";
++			xlnx,include-datawidth-matching-0 = <0x1>;
++			xlnx,include-datawidth-matching-1 = <0x0>;
++			xlnx,include-datawidth-matching-2 = <0x0>;
++			xlnx,include-datawidth-matching-3 = <0x0>;
++			xlnx,include-negedge-ioregs = <0x0>;
++			xlnx,include-plb-ipif = <0x1>;
++			xlnx,include-wrbuf = <0x1>;
++			xlnx,max-mem-width = <0x10>;
++			xlnx,mch-native-dwidth = <0x20>;
++			xlnx,mch-splb-awidth = <0x20>;
++			xlnx,mch-splb-clk-period-ps = <0x2710>;
++			xlnx,mch0-accessbuf-depth = <0x10>;
++			xlnx,mch0-protocol = <0x0>;
++			xlnx,mch0-rddatabuf-depth = <0x10>;
++			xlnx,mch1-accessbuf-depth = <0x10>;
++			xlnx,mch1-protocol = <0x0>;
++			xlnx,mch1-rddatabuf-depth = <0x10>;
++			xlnx,mch2-accessbuf-depth = <0x10>;
++			xlnx,mch2-protocol = <0x0>;
++			xlnx,mch2-rddatabuf-depth = <0x10>;
++			xlnx,mch3-accessbuf-depth = <0x10>;
++			xlnx,mch3-protocol = <0x0>;
++			xlnx,mch3-rddatabuf-depth = <0x10>;
++			xlnx,mem0-width = <0x10>;
++			xlnx,mem1-width = <0x20>;
++			xlnx,mem2-width = <0x20>;
++			xlnx,mem3-width = <0x20>;
++			xlnx,num-banks-mem = <0x1>;
++			xlnx,num-channels = <0x0>;
++			xlnx,pagemode-flash-0 = <0x0>;
++			xlnx,pagemode-flash-1 = <0x0>;
++			xlnx,pagemode-flash-2 = <0x0>;
++			xlnx,pagemode-flash-3 = <0x0>;
++			xlnx,priority-mode = <0x0>;
++			xlnx,synch-mem-0 = <0x0>;
++			xlnx,synch-mem-1 = <0x0>;
++			xlnx,synch-mem-2 = <0x0>;
++			xlnx,synch-mem-3 = <0x0>;
++			xlnx,synch-pipedelay-0 = <0x2>;
++			xlnx,synch-pipedelay-1 = <0x2>;
++			xlnx,synch-pipedelay-2 = <0x2>;
++			xlnx,synch-pipedelay-3 = <0x2>;
++			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
++			xlnx,tavdv-ps-mem-1 = <0x3a98>;
++			xlnx,tavdv-ps-mem-2 = <0x3a98>;
++			xlnx,tavdv-ps-mem-3 = <0x3a98>;
++			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
++			xlnx,tcedv-ps-mem-1 = <0x3a98>;
++			xlnx,tcedv-ps-mem-2 = <0x3a98>;
++			xlnx,tcedv-ps-mem-3 = <0x3a98>;
++			xlnx,thzce-ps-mem-0 = <0x88b8>;
++			xlnx,thzce-ps-mem-1 = <0x1b58>;
++			xlnx,thzce-ps-mem-2 = <0x1b58>;
++			xlnx,thzce-ps-mem-3 = <0x1b58>;
++			xlnx,thzoe-ps-mem-0 = <0x1b58>;
++			xlnx,thzoe-ps-mem-1 = <0x1b58>;
++			xlnx,thzoe-ps-mem-2 = <0x1b58>;
++			xlnx,thzoe-ps-mem-3 = <0x1b58>;
++			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
++			xlnx,tlzwe-ps-mem-1 = <0x0>;
++			xlnx,tlzwe-ps-mem-2 = <0x0>;
++			xlnx,tlzwe-ps-mem-3 = <0x0>;
++			xlnx,tpacc-ps-flash-0 = <0x61a8>;
++			xlnx,tpacc-ps-flash-1 = <0x61a8>;
++			xlnx,tpacc-ps-flash-2 = <0x61a8>;
++			xlnx,tpacc-ps-flash-3 = <0x61a8>;
++			xlnx,twc-ps-mem-0 = <0x2af8>;
++			xlnx,twc-ps-mem-1 = <0x3a98>;
++			xlnx,twc-ps-mem-2 = <0x3a98>;
++			xlnx,twc-ps-mem-3 = <0x3a98>;
++			xlnx,twp-ps-mem-0 = <0x11170>;
++			xlnx,twp-ps-mem-1 = <0x2ee0>;
++			xlnx,twp-ps-mem-2 = <0x2ee0>;
++			xlnx,twp-ps-mem-3 = <0x2ee0>;
++			xlnx,xcl0-linesize = <0x4>;
++			xlnx,xcl0-writexfer = <0x1>;
++			xlnx,xcl1-linesize = <0x4>;
++			xlnx,xcl1-writexfer = <0x1>;
++			xlnx,xcl2-linesize = <0x4>;
++			xlnx,xcl2-writexfer = <0x1>;
++			xlnx,xcl3-linesize = <0x4>;
++			xlnx,xcl3-writexfer = <0x1>;
++		} ;
++		IIC_EEPROM: i2c@81600000 {
++			compatible = "xlnx,xps-iic-2.03.a", "xlnx,xps-iic-2.00.a";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 7 2 >;
++			reg = < 0x81600000 0x10000 >;
++			xlnx,clk-freq = <0x5f5e100>;
++			xlnx,family = "virtex5";
++			xlnx,gpo-width = <0x1>;
++			xlnx,iic-freq = <0x186a0>;
++			xlnx,scl-inertial-delay = <0x5>;
++			xlnx,sda-inertial-delay = <0x5>;
++			xlnx,ten-bit-adr = <0x0>;
++		} ;
++		LEDs_8Bit: gpio@81440000 {
++			compatible = "xlnx,xps-gpio-2.00.a", "xlnx,xps-gpio-1.00.a";
++			reg = < 0x81440000 0x10000 >;
++			xlnx,all-inputs = <0x0>;
++			xlnx,all-inputs-2 = <0x0>;
++			xlnx,dout-default = <0x0>;
++			xlnx,dout-default-2 = <0x0>;
++			xlnx,family = "virtex5";
++			xlnx,gpio-width = <0x8>;
++			xlnx,gpio2-width = <0x20>;
++			xlnx,interrupt-present = <0x0>;
++			xlnx,is-dual = <0x0>;
++			xlnx,tri-default = <0xffffffff>;
++			xlnx,tri-default-2 = <0xffffffff>;
++		} ;
++		LEDs_Positions: gpio@81420000 {
++			compatible = "xlnx,xps-gpio-2.00.a", "xlnx,xps-gpio-1.00.a";
++			reg = < 0x81420000 0x10000 >;
++			xlnx,all-inputs = <0x0>;
++			xlnx,all-inputs-2 = <0x0>;
++			xlnx,dout-default = <0x0>;
++			xlnx,dout-default-2 = <0x0>;
++			xlnx,family = "virtex5";
++			xlnx,gpio-width = <0x5>;
++			xlnx,gpio2-width = <0x20>;
++			xlnx,interrupt-present = <0x0>;
++			xlnx,is-dual = <0x0>;
++			xlnx,tri-default = <0xffffffff>;
++			xlnx,tri-default-2 = <0xffffffff>;
++		} ;
++		Push_Buttons_5Bit: gpio@81400000 {
++			compatible = "xlnx,xps-gpio-2.00.a", "xlnx,xps-gpio-1.00.a";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 11 2 >;
++			reg = < 0x81400000 0x10000 >;
++			xlnx,all-inputs = <0x1>;
++			xlnx,all-inputs-2 = <0x0>;
++			xlnx,dout-default = <0x0>;
++			xlnx,dout-default-2 = <0x0>;
++			xlnx,family = "virtex5";
++			xlnx,gpio-width = <0x5>;
++			xlnx,gpio2-width = <0x20>;
++			xlnx,interrupt-present = <0x1>;
++			xlnx,is-dual = <0x0>;
++			xlnx,tri-default = <0xffffffff>;
++			xlnx,tri-default-2 = <0xffffffff>;
++		} ;
++		RS232_Uart_1: serial@84000000 {
++			clock-frequency = <100000000>;
++			compatible = "xlnx,xps-uartlite-1.01.a", "xlnx,xps-uartlite-1.00.a";
++			current-speed = <115200>;
++			device_type = "serial";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 12 0 >;
++			port-number = <0>;
++			reg = < 0x84000000 0x10000 >;
++			xlnx,baudrate = <0x1c200>;
++			xlnx,data-bits = <0x8>;
++			xlnx,family = "virtex5";
++			xlnx,odd-parity = <0x0>;
++			xlnx,use-parity = <0x0>;
++		} ;
++		SysACE_CompactFlash: sysace@83600000 {
++			compatible = "xlnx,xps-sysace-1.01.a", "xlnx,xps-sysace-1.00.a";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 4 2 >;
++			reg = < 0x83600000 0x10000 >;
++			xlnx,family = "virtex5";
++			xlnx,mem-width = <0x10>;
++		} ;
++		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
++			compatible = "xlnx,xps-bram-if-cntlr-1.00.b", "xlnx,xps-bram-if-cntlr-1.00.a";
++			reg = < 0xffff0000 0x10000 >;
++			xlnx,family = "virtex5";
++		} ;
++		xps_intc_0: interrupt-controller@81800000 {
++			#interrupt-cells = <0x2>;
++			compatible = "xlnx,xps-intc-2.01.a", "xlnx,xps-intc-1.00.a";
++			interrupt-controller ;
++			reg = < 0x81800000 0x10000 >;
++			xlnx,kind-of-intr = <0x106a>;
++			xlnx,num-intr-inputs = <0xd>;
++		} ;
++		xps_ps2_0: xps-ps2@81480000 {
++			#address-cells = <1>;
++			#size-cells = <1>;
++			compatible = "xlnx,compound";
++			ranges = < 0x0 0x81480000 0x10000 >;
++			ps2@0 {
++				compatible = "xlnx,xps-ps2-1.01.b", "xlnx,xps-ps2-1.00.a";
++				interrupt-parent = <&xps_intc_0>;
++				interrupts = < 8 2 >;
++				reg = < 0x0 0x40 >;
++			} ;
++			ps2@1000 {
++				compatible = "xlnx,xps-ps2-1.01.b", "xlnx,xps-ps2-1.00.a";
++				interrupt-parent = <&xps_intc_0>;
++				interrupts = < 9 2 >;
++				reg = < 0x1000 0x40 >;
++			} ;
++		} ;
++		xps_tft_0: tft@86e00000 {
++			compatible = "xlnx,xps-tft-2.01.a";
++			reg = < 0x86e00000 0x10000 >;
++			xlnx,dcr-splb-slave-if = <0x1>;
++			xlnx,default-tft-base-addr = <0x0>;
++			xlnx,family = "virtex5";
++			xlnx,i2c-slave-addr = <0x76>;
++			xlnx,mplb-awidth = <0x20>;
++			xlnx,mplb-dwidth = <0x80>;
++			xlnx,mplb-native-dwidth = <0x40>;
++			xlnx,mplb-smallest-slave = <0x20>;
++			xlnx,tft-interface = <0x1>;
++		} ;
++		xps_timebase_wdt_0: xps-timebase-wdt@83a00000 {
++			compatible = "xlnx,xps-timebase-wdt-1.02.a";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 3 0 2 2 >;
++			reg = < 0x83a00000 0x10000 >;
++			xlnx,family = "virtex5";
++			xlnx,wdt-enable-once = <0x0>;
++			xlnx,wdt-interval = <0x1e>;
++		} ;
++		xps_timer_0: timer@83c00000 {
++			compatible = "xlnx,xps-timer-1.02.a", "xlnx,xps-timer-1.00.a";
++			interrupt-parent = <&xps_intc_0>;
++			interrupts = < 1 0 >;
++			reg = < 0x83c00000 0x10000 >;
++			xlnx,count-width = <0x20>;
++			xlnx,family = "virtex5";
++			xlnx,gen0-assert = <0x1>;
++			xlnx,gen1-assert = <0x1>;
++			xlnx,one-timer-only = <0x0>;
++			xlnx,trig0-assert = <0x1>;
++			xlnx,trig1-assert = <0x1>;
++		} ;
++	} ;
++} ;
+-- 
+1.7.9.5
+
recipes-kernel/linux/linux-xilinx-3.0/virtex5/0002-virtex440-ml507.dts-Update-bootargs-to-use-ramdisk-a.patch new file +73 -0

73 lines not on this page · raw message

recipes-kernel/linux/linux-xilinx-3.0/virtex5/defconfig_3.0.0 new file +1652 -0

1,652 lines not on this page · raw message

recipes-kernel/linux/linux-xilinx_3.0.bb new file +25 -0
new file mode 100644
index 0000000..5028160
@@ -0,0 +1,25 @@
+inherit kernel xilinx-kernel xilinx-utils
+require recipes-kernel/linux/linux-xilinx.inc
+
+DEFAULT_PREFERENCE = "-1"
+
+KBRANCH = "master"
+
+LINUX_VERSION ?= "3.0.0"
+SRCREV_pn-${PN} = "92ddb93ba1cc62fe73429819164c18094e673669"
+FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/linux-xilinx-3.0' ], d)}"
+
+PR = "r00"
+PV = "${LINUX_VERSION}"
+
+SRC_URI = "git://git.xilinx.com/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
+           file://0001-virtex440-ml507.dts-Update-device-tree-to-version-ge.patch \
+           file://0002-virtex440-ml507.dts-Update-bootargs-to-use-ramdisk-a.patch \
+           file://defconfig_3.0.0"
+
+# Support for binary device tree generation
+XILINX_BOARD ?= "${@find_board(bb.data.getVar('XILINX_BSP_PATH', d, 1), d)}"
+KERNEL_DEVICETREE = "${@device_tree(bb.data.getVar('TARGET_ARCH', d, 1), d)}"
+KERNEL_DEVICETREE_microblazeel = "${@device_tree(bb.data.getVar('TARGET_CPU', d, 1), d)}"
+
+COMPATIBLE_MACHINE = "(virtex4|virtex5|virtex5mb|spartan6-sp605|spartan6-lx9mb)"
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH 3/3 linux-xilinx-3.3: Add new recipe for linux-xilinx v3.3.0 kernel.

In reply to Elvis Dowson

This commit adds a new recipe for the linux-xilinx v3.3.0 kernel, and includes the following features:
* support for Xilinx ML507 development board
* support for Xilinx Virtex 5 PowerPC440 processor
* support for console output on a LCD display using the DVI port
* support for using a ramdisk and booting to a bash prompt
* support for xps-uart16550-2.00.a, ttyS0
* support for xps-ethernetlite-4.00.a, 10/100 Mbps ethernet interface

The ramdisk size has been set to 32768 kilobytes. This value can be changed by modifying the supplied kernel deconfig_3.3.0

The linux-xilinx v3.3.0 kernel has been tested using a hardware project created using Xilinx EDK 14.2.

---
 ...pdate-IP-Core-support-for-Xilinx-ISE-14.1.patch |  149 ++
 ...l507.dts-Update-device-tree-file-using-Xi.patch |  875 ++++++++++
 ...x-regression-in-call-to-XPS-TFT-controlle.patch |   32 +
 .../linux/linux-xilinx-3.3/virtex5/defconfig_3.3.0 | 1704 ++++++++++++++++++++
 recipes-kernel/linux/linux-xilinx_3.3.bb           |   26 +
 5 files changed, 2786 insertions(+)
 create mode 100644 recipes-kernel/linux/linux-xilinx-3.3/virtex5/0001-Xilinx-Update-IP-Core-support-for-Xilinx-ISE-14.1.patch
 create mode 100644 recipes-kernel/linux/linux-xilinx-3.3/virtex5/0002-virtex440-ml507.dts-Update-device-tree-file-using-Xi.patch
 create mode 100644 recipes-kernel/linux/linux-xilinx-3.3/virtex5/0003-xilinxfb-Fix-regression-in-call-to-XPS-TFT-controlle.patch
 create mode 100644 recipes-kernel/linux/linux-xilinx-3.3/virtex5/defconfig_3.3.0
 create mode 100644 recipes-kernel/linux/linux-xilinx_3.3.bb
recipes-kernel/linux/linux-xilinx-3.3/virtex5/0001-Xilinx-Update-IP-Core-support-for-Xilinx-ISE-14.1.patch new file +149 -0
new file mode 100644
index 0000000..321f64d
@@ -0,0 +1,149 @@
+From 8a353689559cd864647d39a05ef449e423a07fdd Mon Sep 17 00:00:00 2001
+From: Elvis Dowson <[email protected]>
+Date: Wed, 22 Aug 2012 01:38:03 +0400
+Subject: [PATCH 1/3] Xilinx: Update IP Core support for Xilinx ISE 14.1.
+
+This commit updates linux kernel support for the following IP Cores
+shipped with Xilinx ISE 14.1:
+xlnx,xps-sysace-1.01.a
+xlnx,xps-iic-2.02.a
+xlnx,xps-ethernetlite-4.00.a
+xlnx,xps-ll-temac-2.03.a
+xlnx,xps-uartlite-1.02.a
+
+This commit also updates PowerPC support for the following IP Cores
+shipped with Xilinx ISE 14.1:
+xps-uartlite-1.02.a
+xlnx,plb-v46-1.05.a
+xlnx,xps-intc-2.01.a
+
+Signed-off-by: Elvis Dowson <[email protected]>
+---
+ arch/powerpc/boot/serial.c                         |    4 +++-
+ arch/powerpc/platforms/44x/virtex.c                |    3 +++
+ arch/powerpc/sysdev/xilinx_intc.c                  |    2 ++
+ drivers/block/xsysace.c                            |    1 +
+ drivers/i2c/algos/xilinx_iic/i2c-algo-xilinx.c     |    2 ++
+ drivers/net/ethernet/xilinx/xilinx_emaclite.c      |    2 ++
+ .../ethernet/xilinx/xilinx_lltemac/xlltemac_main.c |    4 ++++
+ drivers/tty/serial/uartlite.c                      |    2 ++
+ 8 files changed, 19 insertions(+), 1 deletion(-)
+
+diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
+index f2156f0..6f901dc 100644
+--- a/arch/powerpc/boot/serial.c
++++ b/arch/powerpc/boot/serial.c
+@@ -130,7 +130,9 @@ int serial_console_init(void)
+ 	else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart"))
+ 		rc = mpc5200_psc_console_init(devp, &serial_cd);
+ 	else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
+-		 dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
++		dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a") ||
++		dt_is_compatible(devp, "xlnx,xps-uartlite-1.01.a") ||
++		dt_is_compatible(devp, "xlnx,xps-uartlite-1.02.a"))
+ 		rc = uartlite_console_init(devp, &serial_cd);
+ 
+ 	/* Add other serial console driver calls here */
+diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c
+index cf96cca..eb208d3 100644
+--- a/arch/powerpc/platforms/44x/virtex.c
++++ b/arch/powerpc/platforms/44x/virtex.c
+@@ -25,6 +25,9 @@ static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+ 	{ .compatible = "simple-bus", },
+ 	{ .compatible = "xlnx,plb-v46-1.00.a", },
+ 	{ .compatible = "xlnx,plb-v46-1.02.a", },
++	{ .compatible = "xlnx,plb-v46-1.03.a", },
++	{ .compatible = "xlnx,plb-v46-1.04.a", },
++	{ .compatible = "xlnx,plb-v46-1.05.a", },
+ 	{ .compatible = "xlnx,plb-v34-1.01.a", },
+ 	{ .compatible = "xlnx,plb-v34-1.02.a", },
+ 	{ .compatible = "xlnx,opb-v20-1.10.c", },
+diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
+index 6183799..a115a20 100644
+--- a/arch/powerpc/sysdev/xilinx_intc.c
++++ b/arch/powerpc/sysdev/xilinx_intc.c
+@@ -267,6 +267,8 @@ static inline void xilinx_i8259_setup_cascade(void) { return; }
+ static struct of_device_id xilinx_intc_match[] __initconst = {
+ 	{ .compatible = "xlnx,opb-intc-1.00.c", },
+ 	{ .compatible = "xlnx,xps-intc-1.00.a", },
++	{ .compatible = "xlnx,xps-intc-2.00.a", },
++	{ .compatible = "xlnx,xps-intc-2.01.a", },
+ 	{}
+ };
+ 
+diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
+index 6e9a86b..8b2ee12 100644
+--- a/drivers/block/xsysace.c
++++ b/drivers/block/xsysace.c
+@@ -1194,6 +1194,7 @@ static const struct of_device_id ace_of_match[] __devinitconst = {
+ 	{ .compatible = "xlnx,opb-sysace-1.00.b", },
+ 	{ .compatible = "xlnx,opb-sysace-1.00.c", },
+ 	{ .compatible = "xlnx,xps-sysace-1.00.a", },
++	{ .compatible = "xlnx,xps-sysace-1.01.a", },
+ 	{ .compatible = "xlnx,sysace", },
+ 	{},
+ };
+diff --git a/drivers/i2c/algos/xilinx_iic/i2c-algo-xilinx.c b/drivers/i2c/algos/xilinx_iic/i2c-algo-xilinx.c
+index 4f3c599..c59b6d0 100644
+--- a/drivers/i2c/algos/xilinx_iic/i2c-algo-xilinx.c
++++ b/drivers/i2c/algos/xilinx_iic/i2c-algo-xilinx.c
+@@ -554,6 +554,8 @@ static int __devinit xilinx_iic_setup(
+ /* Match table for of_platform binding */
+ static struct of_device_id __devinitdata xilinx_iic_of_match[] = {
+ 	{ .compatible = "xlnx,xps-iic-2.00.a", },
++	{ .compatible = "xlnx,xps-iic-2.01.a", },
++	{ .compatible = "xlnx,xps-iic-2.02.a", },
+ 	{},
+ };
+ MODULE_DEVICE_TABLE(of, xilinx_iic_of_match);
+diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+index 79013e5..91fb8e0 100644
+--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
++++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+@@ -1289,6 +1289,8 @@ static struct of_device_id xemaclite_of_match[] __devinitdata = {
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
++	{ .compatible = "xlnx,xps-ethernetlite-3.01.a", },
++	{ .compatible = "xlnx,xps-ethernetlite-4.00.a", },
+ 	{ /* end of list */ },
+ };
+ MODULE_DEVICE_TABLE(of, xemaclite_of_match);
+diff --git a/drivers/net/ethernet/xilinx/xilinx_lltemac/xlltemac_main.c b/drivers/net/ethernet/xilinx/xilinx_lltemac/xlltemac_main.c
+index e008795..b05e996 100644
+--- a/drivers/net/ethernet/xilinx/xilinx_lltemac/xlltemac_main.c
++++ b/drivers/net/ethernet/xilinx/xilinx_lltemac/xlltemac_main.c
+@@ -3595,6 +3595,7 @@ static struct of_device_id xtenet_fifo_of_match[] = {
+ 	{ .compatible = "xlnx,xps-ll-fifo-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ll-fifo-1.00.b", },
+ 	{ .compatible = "xlnx,xps-ll-fifo-1.01.a", },
++	{ .compatible = "xlnx,xps-ll-fifo-1.02.a", },
+ 	{ /* end of list */ },
+ };
+ 
+@@ -3746,6 +3747,9 @@ static struct of_device_id xtenet_of_match[] = {
+ 	{ .compatible = "xlnx,xps-ll-temac-1.00.b", },
+ 	{ .compatible = "xlnx,xps-ll-temac-1.01.a", },
+ 	{ .compatible = "xlnx,xps-ll-temac-1.01.b", },
++	{ .compatible = "xlnx,xps-ll-temac-2.00.a", },
++	{ .compatible = "xlnx,xps-ll-temac-2.02.a", },
++	{ .compatible = "xlnx,xps-ll-temac-2.03.a", },
+ 	{ /* end of list */ },
+ };
+ 
+diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
+index 6cd4143..dd0664d 100644
+--- a/drivers/tty/serial/uartlite.c
++++ b/drivers/tty/serial/uartlite.c
+@@ -566,6 +566,8 @@ static int __devexit ulite_release(struct device *dev)
+ static struct of_device_id ulite_of_match[] __devinitdata = {
+ 	{ .compatible = "xlnx,opb-uartlite-1.00.b", },
+ 	{ .compatible = "xlnx,xps-uartlite-1.00.a", },
++	{ .compatible = "xlnx,xps-uartlite-1.01.a", },
++	{ .compatible = "xlnx,xps-uartlite-1.02.a", },
+ 	{}
+ };
+ MODULE_DEVICE_TABLE(of, ulite_of_match);
+-- 
+1.7.9.5
+
recipes-kernel/linux/linux-xilinx-3.3/virtex5/0002-virtex440-ml507.dts-Update-device-tree-file-using-Xi.patch new file +875 -0

875 lines not on this page · raw message

recipes-kernel/linux/linux-xilinx-3.3/virtex5/0003-xilinxfb-Fix-regression-in-call-to-XPS-TFT-controlle.patch new file +32 -0
new file mode 100644
index 0000000..2ebc0eb
@@ -0,0 +1,32 @@
+From a77debe1e3b3823e18d8ef021b694c42b1515dda Mon Sep 17 00:00:00 2001
+From: Elvis Dowson <[email protected]>
+Date: Wed, 22 Aug 2012 03:22:42 +0400
+Subject: [PATCH 3/3] xilinxfb: Fix regression in call to XPS TFT controller
+ write API.
+
+This commit fixes a regression in xilinx_fb_out_be32(), where an incorrect
+call to the XPS TFT controller's write API, caused the display not to work.
+
+This fix has been adapted from linux-xilinx-3.0.0.
+
+Signed-off-by: Elvis Dowson <[email protected]>
+---
+ drivers/video/xilinxfb.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
+index b800c9c..1808452 100644
+--- a/drivers/video/xilinxfb.c
++++ b/drivers/video/xilinxfb.c
+@@ -154,7 +154,7 @@ static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+ 				u32 val)
+ {
+ 	if (drvdata->flags & PLB_ACCESS_FLAG)
+-		iowrite32(val, drvdata->regs + (offset << 2));
++		out_be32(drvdata->regs + (offset << 2), val);
+ #ifdef CONFIG_PPC_DCR
+ 	else
+ 		dcr_write(drvdata->dcr_host, offset, val);
+-- 
+1.7.9.5
+
recipes-kernel/linux/linux-xilinx-3.3/virtex5/defconfig_3.3.0 new file +1704 -0

1,704 lines not on this page · raw message

recipes-kernel/linux/linux-xilinx_3.3.bb new file +26 -0
new file mode 100644
index 0000000..e236387
@@ -0,0 +1,26 @@
+inherit kernel xilinx-kernel xilinx-utils
+require recipes-kernel/linux/linux-xilinx.inc
+
+DEFAULT_PREFERENCE = "1"
+
+KBRANCH = "master"
+
+LINUX_VERSION ?= "3.3.0"
+SRCREV_pn-${PN} = "1e92da8e3a66b051766b1be57be67e2bff11e19d"
+FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/linux-xilinx-3.3' ], d)}"
+
+PR = "r00"
+PV = "${LINUX_VERSION}"
+
+SRC_URI = "git://git.xilinx.com/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
+           file://0001-Xilinx-Update-IP-Core-support-for-Xilinx-ISE-14.1.patch \
+           file://0002-virtex440-ml507.dts-Update-device-tree-file-using-Xi.patch \
+           file://0003-xilinxfb-Fix-regression-in-call-to-XPS-TFT-controlle.patch \
+           file://defconfig_3.3.0"
+
+# Support for binary device tree generation
+XILINX_BOARD ?= "${@find_board(bb.data.getVar('XILINX_BSP_PATH', d, 1), d)}"
+KERNEL_DEVICETREE = "${@device_tree(bb.data.getVar('TARGET_ARCH', d, 1), d)}"
+KERNEL_DEVICETREE_microblazeel = "${@device_tree(bb.data.getVar('TARGET_CPU', d, 1), d)}"
+
+COMPATIBLE_MACHINE = "(virtex4|virtex5|virtex5mb|spartan6-sp605|spartan6-lx9mb)"
Signature · 1 line
1.7.9.5