dw_dmac: utilize slave_id to pass request line
PATCH 1/1 dw_dmac: utilize slave_id to pass request line
There is slave_id field in the generic slave config structure that is dedicated for the uniq slave number. In our case we have the request lines wired to the certain hardware. Therefore the number of the request line is uniq and could be used as slave_id. It allows us in some cases to drop out the usage of the custom slave config structure.
--- drivers/dma/dw_dmac.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/dma/dw_dmac.c +5 -0
@@ -187,6 +187,11 @@ static void dwc_initialize(struct dw_dma_chan *dwc) cfghi = dws->cfg_hi; cfglo |= dws->cfg_lo & ~DWC_CFGL_CH_PRIOR_MASK ; + }else { +if (dwc->dma_sconfig.direction ==DMA_MEM_TO_DEV ) + cfghi =DWC_CFGH_DST_PER (dwc->dma_sconfig.slave_id); +else if (dwc->dma_sconfig.direction ==DMA_DEV_TO_MEM ) + cfghi =DWC_CFGH_SRC_PER (dwc->dma_sconfig.slave_id); }channel_writel (dwc,CFG_LO , cfglo);
Signature · 1 line
1.7.10.4
Quoted 17 lines · Andy Shevchenko
There is
slave_idfield in the generic slave config structure that is dedicated for the uniq slave number. In our case we have the request lines wired to the certain hardware. Therefore the number of the request line is uniq and could be used asslave_id. It allows us in some cases to drop out the usage of the custom slave config structure.Signed-off-by Andy Shevchenko <[email protected]>--- drivers/dma/dw_dmac.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/dma/dw_dmac.c +0
-0@@ -187,6 +187,11 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
drivers/dma/dw_dmac.c static void dwc_initialize(struct dw_dma_chan *dwc) · line 197
Quoted 10 lines
drivers/dma/dw_dmac.c +5
-0cfghi = dws->cfg_hi; cfglo |= dws->cfg_lo & ~DWC_CFGL_CH_PRIOR_MASK ; + }else { +if (dwc->dma_sconfig.direction ==DMA_MEM_TO_DEV ) + cfghi =DWC_CFGH_DST_PER (dwc->dma_sconfig.slave_id); +else if (dwc->dma_sconfig.direction ==DMA_DEV_TO_MEM ) + cfghi =DWC_CFGH_SRC_PER (dwc->dma_sconfig.slave_id); }channel_writel (dwc,CFG_LO , cfglo);
Quoted 7 lines · Andy Shevchenko
There is
slave_idfield in the generic slave config structure that is dedicated for the uniq slave number. In our case we have the request lines wired to the certain hardware. Therefore the number of the request line is uniq and could be used asslave_id. It allows us in some cases to drop out the usage of the custom slave config structure.Signed-off-by Andy Shevchenko <[email protected]>
Applied thanks
Quoted 20 lines
--- drivers/dma/dw_dmac.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/dma/dw_dmac.c +5
-0@@ -187,6 +187,11 @@ static void dwc_initialize(struct dw_dma_chan *dwc) cfghi = dws->cfg_hi; cfglo |= dws->cfg_lo & ~DWC_CFGL_CH_PRIOR_MASK ; + }else { +if (dwc->dma_sconfig.direction ==DMA_MEM_TO_DEV ) + cfghi =DWC_CFGH_DST_PER (dwc->dma_sconfig.slave_id); +else if (dwc->dma_sconfig.direction ==DMA_DEV_TO_MEM ) + cfghi =DWC_CFGH_SRC_PER (dwc->dma_sconfig.slave_id); }channel_writel (dwc,CFG_LO , cfglo);
Signature · 1 line
~Vinod