NEXT:staging "winbond" Fix typos.
PATCH 1/1 NEXT:staging "winbond" Fix typos.
From: "Justin P. Mattock" <[email protected]>
Signed-off-by Justin P. Mattock <[email protected]>
---
The below patch fixes typos found while reading through staging "winbond".
drivers/staging/winbond/localpara.h | 4 ++-- drivers/staging/winbond/mds.c | 2 +- drivers/staging/winbond/mto.c | 2 +- drivers/staging/winbond/phy_calibration.c | 14 +++++++------- drivers/staging/winbond/reg.c | 2 +- drivers/staging/winbond/sme_api.h | 2 +- drivers/staging/winbond/wb35reg.c | 4 ++-- drivers/staging/winbond/wb35tx.c | 8 ++++---- drivers/staging/winbond/wb35tx_s.h | 2 +- 9 files changed, 20 insertions(+), 20 deletions(-)
drivers/staging/winbond/localpara.h +2 -2
@@ -137,7 +137,7 @@ struct wb_local_para {u8 iPowerSaveMode;/* 0 indicates on, 1 indicates off */ u8 ATIMmode;u8 ExcludeUnencrypted; -/* Unit ime count for the decision to enter PS mode */ +/* Unit time count for the decision to enter PS mode */ u16 CheckCountForPS;u8 boHasTxActivity;/* tx activity has occurred */ u8 boMacPsValid;/* Power save mode obtained from H/W is valid or not */
@@ -187,7 +187,7 @@ struct wb_local_para {u8 reserved7[3 ];struct chan_info CurrentChan;/* Current channel no. and channel band. It may be changed by scanning. */ -u8 boHandover;/* Roaming, Hnadover to other AP. */ +u8 boHandover;/* Roaming, Handover to other AP. */ u8 boCCAbusy;u16 CWMax;/* It may not be the real value that H/W used */
drivers/staging/winbond/mds.c +1 -1
@@ -569,7 +569,7 @@ Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pT02)unsigned char SendOK = true;u8 RetryCount, TxRate; -if (pT02->T02_IgnoreResult)/* Don't care the result */ +if (pT02->T02_IgnoreResult)/* Don't care about the result */ return ;if (pT02->T02_IsLastMpdu) {/* TODO: DTO -- get the retry count and fragment count */
drivers/staging/winbond/mto.c +1 -1
@@ -23,7 +23,7 @@#include "core.h" /* Declare SQ3 to rate and fragmentation threshold table */ -/* Declare fragmentation thresholds table */ +/* Declare fragmentation threshold table */ #define MTO_MAX_FRAG_TH_LEVELS 5#define MTO_MAX_DATA_RATE_LEVELS 12
drivers/staging/winbond/phy_calibration.c +7 -7
@@ -399,7 +399,7 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen val |=MASK_ADC_DC_CAL_STR ;hw_set_dxx_reg (phw_data,REG_MODE_CTRL , val); -/* e. The result are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]" */ +/* e. The results are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]" */ #ifdef _DEBUGhw_get_dxx_reg (phw_data,REG_OFFSET_READ , &val);PHY_DEBUG (("[CAL] REG_OFFSET_READ = 0x%08X\n" , val));
@@ -720,7 +720,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,for (capture_time =0 ; capture_time <10 ; capture_time++) {/* * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to -* enable "IQ alibration Mode II" +* enable "IQ calibration Mode II" */ reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL |MASK_IQCAL_MODE ); reg_mode_ctrl &= ~MASK_IQCAL_MODE ;
@@ -750,7 +750,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,/* * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to -* enable "IQ alibration Mode II" +* enable "IQ calibration Mode II" */ /* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */ hw_get_dxx_reg (phw_data,REG_MODE_CTRL , ®_mode_ctrl);
@@ -980,7 +980,7 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)phy_set_rf_data (phw_data,0 , (0 <<24 )|0xFDF1C0 );/* ; [BB-chip]: Calibration (6f).Send test pattern */ /* ; [BB-chip]: Calibration (6g). Search RXGCL optimal value */ -/* ; [BB-chip]: Calibration (6h). Caculate TX-path IQ imbalance and setting TX path IQ compensation table */ +/* ; [BB-chip]: Calibration (6h). Calculate TX-path IQ imbalance and setting TX path IQ compensation table */ /* phy_set_rf_data(phw_data, 3, (3<<24)|0x025586); */ msleep (30 );/* 20060612.1.a 30ms delay. Add the follow 2 lines */
@@ -1373,7 +1373,7 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre/***************************************************************/ void _rx_iq_calibration_winbond (struct hw_data *phw_data,u32 frequency) { -/* figo 20050523 marked this flag for can't compile for relesase */ +/* figo 20050523 marked this flag for can't compile for release */ #ifdef _DEBUGs32 rx_cal_reg[4 ];u32 val;
@@ -1397,7 +1397,7 @@ void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)/* ; [BB-chip]: Calibration (7f). Send test pattern */ /* ; [BB-chip]: Calibration (7g). Search RXGCL optimal value */ -/* ; [BB-chip]: Calibration (7h). Caculate RX-path IQ imbalance and setting RX path IQ compensation table */ +/* ; [BB-chip]: Calibration (7h). Calculate RX-path IQ imbalance and setting RX path IQ compensation table */ result =_rx_iq_calibration_loop_winbond (phw_data,12589 , frequency);
@@ -1454,7 +1454,7 @@ void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)_rxadc_dc_offset_cancellation_winbond (phw_data, frequency);/* _txidac_dc_offset_cancellation_winbond(phw_data); */ -/* _txqdac_dc_offset_cacellation_winbond(phw_data); */ +/* _txqdac_dc_offset_cancellation_winbond(phw_data); */ _tx_iq_calibration_winbond (phw_data);_rx_iq_calibration_winbond (phw_data, frequency);
drivers/staging/winbond/reg.c +1 -1
@@ -693,7 +693,7 @@ u32 w89rf242_rf_data[] = { (0x0E <<24 ) |0x5557DC ,/* 1555F ; IBSC (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F */ (0x10 <<24 ) |0x000C20 ,/* 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB */ (0x11 <<24 ) |0x0C0022 ,/* 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C) */ - (0x12 <<24 ) |0x000024 /* TMODC (0x12) -- Turn OFF Tempearure sensor */ + (0x12 <<24 ) |0x000024 /* TMODC (0x12) -- Turn OFF Temperature sensor */ }; u32 w89rf242_channel_data_24[][2] = {
drivers/staging/winbond/sme_api.h +1 -1
@@ -107,7 +107,7 @@ s8 sme_set_bssid_list_scan(void *pcore_data, void *pscan_para);s8 sme_set_reload_defaults (void *pcore_data,u8 reload_type); -/*------------------------- none-standard ----------------------------------*/ +/*------------------------- non-standard ----------------------------------*/ s8 sme_get_connect_status (void *pcore_data,u8 *pstatus);/*--------------------------------------------------------------------------*/
drivers/staging/winbond/wb35reg.c +2 -2
@@ -217,7 +217,7 @@ unsigned char Wb35Reg_Write(struct hw_data *pHwData, u16 RegisterNo, u32 Registe* This command will be executed with a user defined value. When it completes, * this value is useful. For example, hal_set_current_channel will use it. * true : read command process successfully -* false : register not support +* false : register not supported */ unsigned char Wb35Reg_WriteWithCallbackValue(struct hw_data *pHwData, u16 RegisterNo,
@@ -631,7 +631,7 @@ unsigned char Wb35Reg_initial(struct hw_data *pHwData)* CardComputeCrc -- * * Description: -* Runs the AUTODIN II CRC algorithm on buffer Buffer of length, Length. +* Runs the AUTODIN II CRC algorithm on the buffers Buffer length. * * Arguments: * Buffer - the input buffer
drivers/staging/winbond/wb35tx.c +4 -4
@@ -149,14 +149,14 @@ void Wb35Tx_stop(struct hw_data * pHwData) {struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx; -// Trying to canceling the Trp of EP2 +// Try to cancel the Trp of EP2 if (pWb35Tx->EP2vm_state ==VM_RUNNING ) -usb_unlink_urb ( pWb35Tx->Tx2Urb );// Only use unlink, let Wb35Tx_destrot to free them +usb_unlink_urb ( pWb35Tx->Tx2Urb );// Only use unlink, let Wb35Tx_destroy to free them pr_debug ("EP2 Tx stop\n" ); -// Trying to canceling the Irp of EP4 +// Try to cancel the Irp of EP4 if (pWb35Tx->EP4vm_state ==VM_RUNNING ) -usb_unlink_urb ( pWb35Tx->Tx4Urb );// Only use unlink, let Wb35Tx_destrot to free them +usb_unlink_urb ( pWb35Tx->Tx4Urb );// Only use unlink, let Wb35Tx_destroy to free them pr_debug ("EP4 Tx stop\n" ); }
drivers/staging/winbond/wb35tx_s.h +1 -1
@@ -41,7 +41,7 @@ struct wb35_tx {int EP4VM_status;u32 TxFillCount;// 20060928 - u32 TxTimer; // 20060928 Add if sending packet not great than 13 + u32 TxTimer; // 20060928 Add if sending packet is greater than 13 };#endif
Signature · 1 line
1.7.9.5
Quoted 3 lines · Justin P. Mattock
From: "Justin P. Mattock" <[email protected]>
Signed-off-by Justin P. Mattock <[email protected]>
ACK.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html