Skip to contentSkip to conversation

Tools: hv

PATCH New K. Y. Srinivasan 1 participant 4 messages Sep 5, 2012 Hyper-V/Azure core and drivers

lore
Share & tools
lore
#0 lore raw

cover Tools: hv

This patchset fixes some bugs in the KVP daemon code.

Ben Hutchings (3):
tools/hv: Fix file handle leak
tools/hv: Fix exit() error code
tools/hv: Check for read/write errors

 tools/hv/hv_kvp_daemon.c |   45 +++++++++++++++++++++++++++++++--------------
 1 files changed, 31 insertions(+), 14 deletions(-)
Signature · 1 line
1.7.4.1
#1 lore raw

PATCH 1/3 tools/hv: Fix file handle leak

From: Ben Hutchings <[email protected]>

Match up each fopen() with an fclose().

---
 tools/hv/hv_kvp_daemon.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
tools/hv/hv_kvp_daemon.c +2 -1
index c8e1013..4514fb4 100644
@@ -160,7 +160,7 @@ static void kvp_update_file(int pool)
 				sizeof(struct kvp_record),
 				kvp_file_info[pool].num_records, filep);
 
-	fflush(filep);
+	fclose(filep);
 	kvp_release_lock(pool);
 }
 
@@ -207,6 +207,7 @@ static void kvp_update_mem_state(int pool)
 	kvp_file_info[pool].records = record;
 	kvp_file_info[pool].num_records = records_read;
 
+	fclose(filep);
 	kvp_release_lock(pool);
 }
 static int kvp_file_init(void)
Signature · 1 line
1.7.4.1
#2 lore raw

PATCH 2/3 tools/hv: Fix exit() error code

From: Ben Hutchings <[email protected]>

Linux native exit codes are 8-bit unsigned values. exit(-1) results in an exit code of 255, which is usually reserved for shells reporting 'command not found'. Use the portable value EXIT_FAILURE. (Not that this matters much for a daemon.)

---
 tools/hv/hv_kvp_daemon.c |   22 +++++++++++-----------
 1 files changed, 11 insertions(+), 11 deletions(-)
tools/hv/hv_kvp_daemon.c +11 -11
index 4514fb4..01b3ca5 100644
@@ -122,7 +122,7 @@ static void kvp_acquire_lock(int pool)
 
 	if (fcntl(kvp_file_info[pool].fd, F_SETLKW, &fl) == -1) {
 		syslog(LOG_ERR, "Failed to acquire the lock pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 }
 
@@ -134,7 +134,7 @@ static void kvp_release_lock(int pool)
 	if (fcntl(kvp_file_info[pool].fd, F_SETLK, &fl) == -1) {
 		perror("fcntl");
 		syslog(LOG_ERR, "Failed to release the lock pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 }
 
@@ -153,7 +153,7 @@ static void kvp_update_file(int pool)
 	if (!filep) {
 		kvp_release_lock(pool);
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	bytes_written = fwrite(kvp_file_info[pool].records,
@@ -179,7 +179,7 @@ static void kvp_update_mem_state(int pool)
 	if (!filep) {
 		kvp_release_lock(pool);
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	while (!feof(filep)) {
 		readp = &record[records_read];
@@ -196,7 +196,7 @@ static void kvp_update_mem_state(int pool)
 
 			if (record == NULL) {
 				syslog(LOG_ERR, "malloc failed");
-				exit(-1);
+				exit(EXIT_FAILURE);
 			}
 			continue;
 		}
@@ -225,7 +225,7 @@ static int kvp_file_init(void)
 	if (access("/var/opt/hyperv", F_OK)) {
 		if (mkdir("/var/opt/hyperv", S_IRUSR | S_IWUSR | S_IROTH)) {
 			syslog(LOG_ERR, " Failed to create /var/opt/hyperv");
-			exit(-1);
+			exit(EXIT_FAILURE);
 		}
 	}
 
@@ -1358,13 +1358,13 @@ int main(void)
 
 	if (kvp_file_init()) {
 		syslog(LOG_ERR, "Failed to initialize the pools");
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	fd = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
 	if (fd < 0) {
 		syslog(LOG_ERR, "netlink socket creation failed; error:%d", fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	addr.nl_family = AF_NETLINK;
 	addr.nl_pad = 0;
@@ -1376,7 +1376,7 @@ int main(void)
 	if (error < 0) {
 		syslog(LOG_ERR, "bind failed; error:%d", error);
 		close(fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	sock_opt = addr.nl_groups;
 	setsockopt(fd, 270, 1, &sock_opt, sizeof(sock_opt));
@@ -1396,7 +1396,7 @@ int main(void)
 	if (len < 0) {
 		syslog(LOG_ERR, "netlink_send failed; error:%d", len);
 		close(fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	pfd.fd = fd;
@@ -1608,7 +1608,7 @@ kvp_done:
 		len = netlink_send(fd, incoming_cn_msg);
 		if (len < 0) {
 			syslog(LOG_ERR, "net_link send failed; error:%d", len);
-			exit(-1);
+			exit(EXIT_FAILURE);
 		}
 	}
 
Signature · 1 line
1.7.4.1
#3 lore raw

PATCH 3/3 tools/hv: Check for read/write errors

In reply to K. Y. Srinivasan

From: Ben Hutchings <[email protected]>

hv_kvp_daemon currently does not check whether fread() or fwrite() succeed. Add the necessary checks. Also, remove the incorrect use of feof() before fread().

---
 tools/hv/hv_kvp_daemon.c |   22 +++++++++++++++++++---
 1 files changed, 19 insertions(+), 3 deletions(-)
tools/hv/hv_kvp_daemon.c +19 -3
index 01b3ca5..3922abc 100644
@@ -160,7 +160,12 @@ static void kvp_update_file(int pool)
 				sizeof(struct kvp_record),
 				kvp_file_info[pool].num_records, filep);
 
-	fclose(filep);
+	if (ferror(filep) || fclose(filep)) {
+		kvp_release_lock(pool);
+		syslog(LOG_ERR, "Failed to write file, pool: %d", pool);
+		exit(EXIT_FAILURE);
+	}
+
 	kvp_release_lock(pool);
 }
 
@@ -181,12 +186,17 @@ static void kvp_update_mem_state(int pool)
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
 		exit(EXIT_FAILURE);
 	}
-	while (!feof(filep)) {
+	for (;;) {
 		readp = &record[records_read];
 		records_read += fread(readp, sizeof(struct kvp_record),
 					ENTRIES_PER_BLOCK * num_blocks,
 					filep);
 
+		if (ferror(filep)) {
+			syslog(LOG_ERR, "Failed to read file, pool: %d", pool);
+			exit(EXIT_FAILURE);
+		}
+
 		if (!feof(filep)) {
 			/*
 			 * We have more data to read.
@@ -249,12 +259,18 @@ static int kvp_file_init(void)
 			fclose(filep);
 			return 1;
 		}
-		while (!feof(filep)) {
+		for (;;) {
 			readp = &record[records_read];
 			records_read += fread(readp, sizeof(struct kvp_record),
 					ENTRIES_PER_BLOCK,
 					filep);
 
+			if (ferror(filep)) {
+				syslog(LOG_ERR, "Failed to read file, pool: %d",
+				       i);
+				exit(EXIT_FAILURE);
+			}
+
 			if (!feof(filep)) {
 				/*
 				 * We have more data to read.
Signature · 1 line
1.7.4.1