Skip to contentSkip to conversation

HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips

PATCH In review Wang Xingchao 2 participants 7 messages Sep 6, 2012 – Sep 7, 2012 Sound

lore
Share & tools
lore
#0 lore raw

cover HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips

As i have no A/V receiver handy and could not test HBR playback directly, i removed the "RFC" type until the patchset was tested and proved working well. The patchset was tested on Intel chips and get positive feedback.

Quote from "Øyvind Kvålsvoll <[email protected]>":
"TrueHD and DTS-MA work fine from XBMC, 2-ch playback also works fine from XBMC.
Channels are all mapped to the right speaker, all 7.1."

Quote from alanwww1:
"I tested the patches. They work perfectly. I tested it with both DTS Master Audio and Dolby Tru HD streams.
Also tested with speaker-test. Channel mapping was right."
From: http://forum.xbmc.org/showthread.php?tid=128298&pid=1184574#pid1184574

Maybe there's still potential bug and i will keep on track that.

The idea of this patch comes from Anssi, Big credit to him at first! Thanks the guys from XBMC forum which help test the patches.

For people interested to test the patch, please remember to apply another change in alsa-lib side, you can refer to the patch detail from XBMC forum:
http://forum.xbmc.org/showthread.php?tid=128298&pid=1178776#pid1178776

I will send that patch to alsa-lib mail-list later.

Changelog:
* do not touch channel_allocation priority order, use new api to get correct channels number
* use spdif->status to check audio type, pcm or non-pcm
* create new non_pcm_mapping[] for non_pcm audio in seperate block
* add non_pcm hdmi_spec_per_cvt to remember previous audio type, used to determine whether need a channel mapping update during the pcm/non-pcm stream switch with same channel number.

Wang Xingchao (3):
ALSA: HDMI - Fix channel_allocation array wrong order
ALSA: HDMI - Enable HBR feature on Intel chips
ALSA: HDMI - Setup channel mapping for non_pcm audio

 sound/pci/hda/patch_hdmi.c |   56 ++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)
Signature · 6 lines
1.7.9.5

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#1 lore raw

PATCH 1/3 ALSA: HDMI - Fix channel_allocation array wrong order

The array channel_allocations[] is an ordered list, add function to get correct order by ca_index.

---
 sound/pci/hda/patch_hdmi.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
sound/pci/hda/patch_hdmi.c +14 -1
index d9439c5..6ac21d4 100644
@@ -469,6 +469,17 @@ static void init_channel_allocations(void)
 	}
 }
 
+static int get_channel_allocation_order(int ca)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+		if (channel_allocations[i].ca_index == ca)
+			break;
+	}
+	return i;
+}
+
 /*
  * The transformation takes two steps:
  *
@@ -541,9 +552,11 @@ static void hdmi_setup_channel_mapping(struct hda_codec *codec,
 {
 	int i;
 	int err;
+	int order;
 
+	order = get_channel_allocation_order(ca);
 	if (hdmi_channel_mapping[ca][1] == 0) {
-		for (i = 0; i < channel_allocations[ca].channels; i++)
+		for (i = 0; i < channel_allocations[order].channels; i++)
 			hdmi_channel_mapping[ca][i] = i | (i << 4);
 		for (; i < 8; i++)
 			hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH 2/3 ALSA: HDMI - Enable HBR feature on Intel chips

In reply to Wang Xingchao

HDMI channel remapping apparently effects HBR packets on Intel's chips. For compressed non-PCM audio, use "straight-through" channel mapping. For uncompressed multi-channel pcm audio, use normal channel mapping.

---
 sound/pci/hda/patch_hdmi.c |   36 ++++++++++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)
sound/pci/hda/patch_hdmi.c +32 -4
index 6ac21d4..a87f8b2 100644
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
+#include <sound/asoundef.h>
 #include "hda_codec.h"
 #include "hda_local.h"
 #include "hda_jack.h"
@@ -60,6 +61,7 @@ struct hdmi_spec_per_cvt {
 	u32 rates;
 	u64 formats;
 	unsigned int maxbps;
+	bool non_pcm;
 };
 
 struct hdmi_spec_per_pin {
@@ -548,13 +550,17 @@ static void hdmi_debug_channel_mapping(struct hda_codec *codec,
 
 static void hdmi_setup_channel_mapping(struct hda_codec *codec,
 				       hda_nid_t pin_nid,
+				       hda_nid_t cvt_nid,
+				       bool non_pcm,
 				       int ca)
 {
 	int i;
 	int err;
 	int order;
+	int non_pcm_mapping[8];
 
 	order = get_channel_allocation_order(ca);
+
 	if (hdmi_channel_mapping[ca][1] == 0) {
 		for (i = 0; i < channel_allocations[order].channels; i++)
 			hdmi_channel_mapping[ca][i] = i | (i << 4);
@@ -562,10 +568,17 @@ static void hdmi_setup_channel_mapping(struct hda_codec *codec,
 			hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
 	}
 
+	if (non_pcm) {
+		for (i = 0; i < channel_allocations[order].channels; i++)
+			non_pcm_mapping[i] = i | (i << 4);
+		for (; i < 8; i++)
+			non_pcm_mapping[i] = 0xf | (i << 4);
+	}
+
 	for (i = 0; i < 8; i++) {
 		err = snd_hda_codec_write(codec, pin_nid, 0,
 					  AC_VERB_SET_HDMI_CHAN_SLOT,
-					  hdmi_channel_mapping[ca][i]);
+					  non_pcm ? non_pcm_mapping[i] : hdmi_channel_mapping[ca][i]);
 		if (err) {
 			snd_printdd(KERN_NOTICE
 				    "HDMI: channel mapping failed\n");
@@ -699,15 +712,27 @@ static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
 }
 
 static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
-					struct snd_pcm_substream *substream)
+					hda_nid_t cvt_nid, struct snd_pcm_substream *substream)
 {
 	struct hdmi_spec *spec = codec->spec;
 	struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
+	struct hdmi_spec_per_cvt *per_cvt;
+	struct hda_spdif_out *spdif;
 	hda_nid_t pin_nid = per_pin->pin_nid;
 	int channels = substream->runtime->channels;
 	struct hdmi_eld *eld;
 	int ca;
+	int cvt_idx;
 	union audio_infoframe ai;
+	bool non_pcm = false;
+
+	cvt_idx = cvt_nid_to_cvt_index(spec, cvt_nid);
+	per_cvt = &spec->cvts[cvt_idx];
+
+	mutex_lock(&codec->spdif_mutex);
+	spdif = snd_hda_spdif_out_of_nid(codec, cvt_nid);
+	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
+	mutex_unlock(&codec->spdif_mutex);
 
 	eld = &spec->pins[pin_idx].sink_eld;
 	if (!eld->monitor_present)
@@ -750,12 +775,14 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
 			    "pin=%d channels=%d\n",
 			    pin_nid,
 			    channels);
-		hdmi_setup_channel_mapping(codec, pin_nid, ca);
+		hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid, non_pcm, ca);
 		hdmi_stop_infoframe_trans(codec, pin_nid);
 		hdmi_fill_audio_infoframe(codec, pin_nid,
 					    ai.bytes, sizeof(ai));
 		hdmi_start_infoframe_trans(codec, pin_nid);
 	}
+
+	per_cvt->non_pcm = non_pcm;
 }
 
 
@@ -1077,6 +1104,7 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 
 	per_cvt->cvt_nid = cvt_nid;
 	per_cvt->channels_min = 2;
+	per_cvt->non_pcm = false;
 	if (chans <= 16)
 		per_cvt->channels_max = chans;
 
@@ -1164,7 +1192,7 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 
 	hdmi_set_channel_count(codec, cvt_nid, substream->runtime->channels);
 
-	hdmi_setup_audio_infoframe(codec, pin_idx, substream);
+	hdmi_setup_audio_infoframe(codec, pin_idx, cvt_nid, substream);
 
 	pinctl = snd_hda_codec_read(codec, pin_nid, 0,
 				    AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
Signature · 1 line
1.7.9.5
#3 lore raw

PATCH 3/3 ALSA: HDMI - Setup channel mapping for non_pcm audio

In reply to Wang Xingchao

For HBR stream test, use straight channel mapping way.
when switched back to "speaker-test -c8", even the audio infoframe is up-to-date, there should be correct channel mapping setup.

---
 sound/pci/hda/patch_hdmi.c |    5 +++++
 1 file changed, 5 insertions(+)
sound/pci/hda/patch_hdmi.c +5 -0
index a87f8b2..bcb0939 100644
@@ -780,6 +780,11 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
 		hdmi_fill_audio_infoframe(codec, pin_nid,
 					    ai.bytes, sizeof(ai));
 		hdmi_start_infoframe_trans(codec, pin_nid);
+	} else {
+		/* For non-pcm audio switch, setup new channel mapping
+		 * accordingly */
+		if (per_cvt->non_pcm != non_pcm)
+			hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid, non_pcm, ca);
 	}
 
 	per_cvt->non_pcm = non_pcm;
Signature · 1 line
1.7.9.5
#4 lore raw
In reply to Wang Xingchao

At Thu, 6 Sep 2012 10:02:35 +0800,

Quoted 16 lines · Wang Xingchao

As i have no A/V receiver handy and could not test HBR playback directly, i removed the "RFC" type until the patchset was tested and proved working well. The patchset was tested on Intel chips and get positive feedback.

Quote from "Øyvind Kvålsvoll <[email protected]>":
"TrueHD and DTS-MA work fine from XBMC, 2-ch playback also works fine from XBMC.
Channels are all mapped to the right speaker, all 7.1."

Quote from alanwww1:
"I tested the patches. They work perfectly. I tested it with both DTS Master Audio and Dolby Tru HD streams.
Also tested with speaker-test. Channel mapping was right."
From: http://forum.xbmc.org/showthread.php?tid=128298&pid=1184574#pid1184574

Quoted 8 lines

Maybe there's still potential bug and i will keep on track that.

The idea of this patch comes from Anssi, Big credit to him at first! Thanks the guys from XBMC forum which help test the patches.

For people interested to test the patch, please remember to apply another change in alsa-lib side, you can refer to the patch detail from XBMC forum:
http://forum.xbmc.org/showthread.php?tid=128298&pid=1178776#pid1178776

Note that the alsa-lib fix isn't necessarily applied to all systems. The bug appears only on systems with both SPDIF and HDMI.

In anyway, I applied the kernel patches now. Thanks.

Takashi

Quoted 13 lines

I will send that patch to alsa-lib mail-list later.

Changelog:
* do not touch channel_allocation priority order, use new api to get correct channels number
* use spdif->status to check audio type, pcm or non-pcm
* create new non_pcm_mapping[] for non_pcm audio in seperate block
* add non_pcm hdmi_spec_per_cvt to remember previous audio type, used to determine whether need a channel mapping update during the pcm/non-pcm stream switch with same channel number.

Quoted 11 lines

Wang Xingchao (3):
ALSA: HDMI - Fix channel_allocation array wrong order
ALSA: HDMI - Enable HBR feature on Intel chips
ALSA: HDMI - Setup channel mapping for non_pcm audio

 sound/pci/hda/patch_hdmi.c |   56 ++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)
Signature · 1 line
1.7.9.5

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#5 lore raw

At Thu, 06 Sep 2012 08:53:53 +0200,

Quoted 24 lines · Takashi Iwai

At Thu, 6 Sep 2012 10:02:35 +0800,

Quoted 21 lines · Wang Xingchao

As i have no A/V receiver handy and could not test HBR playback directly, i removed the "RFC" type until the patchset was tested and proved working well. The patchset was tested on Intel chips and get positive feedback.

Quote from "Øyvind Kvålsvoll <[email protected]>":
"TrueHD and DTS-MA work fine from XBMC, 2-ch playback also works fine from XBMC.
Channels are all mapped to the right speaker, all 7.1."

Quote from alanwww1:
"I tested the patches. They work perfectly. I tested it with both DTS Master Audio and Dolby Tru HD streams.
Also tested with speaker-test. Channel mapping was right."
From: http://forum.xbmc.org/showthread.php?tid=128298&pid=1184574#pid1184574

Maybe there's still potential bug and i will keep on track that.

The idea of this patch comes from Anssi, Big credit to him at first! Thanks the guys from XBMC forum which help test the patches.

Quoted 8 lines
Quoted 3 lines

For people interested to test the patch, please remember to apply another change in alsa-lib side, you can refer to the patch detail from XBMC forum:
http://forum.xbmc.org/showthread.php?tid=128298&pid=1178776#pid1178776

Note that the alsa-lib fix isn't necessarily applied to all systems. The bug appears only on systems with both SPDIF and HDMI.

In anyway, I applied the kernel patches now. Thanks.

While looking through the code again (and need to rebase my channel mapping branch), I found that the check of non-PCM should be done to each pin instead of converter. Basically the setup is done to the audio infoframe of the pin, so when the driver reconnects to another converter upon the new option, there might be inconsistency regarding non-PCM status.

So I applied the patch below in addition now.

Takashi

===

From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Move non-PCM check to per_pin in patch_hdmi.c

Recently the check for non-PCM stream state was added to the generic HDMI driver code. But this check should be done rather to each pin instead of each converter. Otherwise when a different converter is assigned at the next open, the audio infoframe can be inconsistent with the setup using the previous converter.

For fixing this issue, this patch moves the state of the current non-PCM status from per_cvt to per_pin. (In addition an unused argument cvt_nid is stripped from hdmi_setup_channel_mapping())

---
 sound/pci/hda/patch_hdmi.c | 46 +++++++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 21 deletions(-)
sound/pci/hda/patch_hdmi.c +25 -21
index 5361298..333d533 100644
@@ -61,7 +61,6 @@ struct hdmi_spec_per_cvt {
 	u32 rates;
 	u64 formats;
 	unsigned int maxbps;
-	bool non_pcm;
 };
 
 struct hdmi_spec_per_pin {
@@ -73,6 +72,7 @@ struct hdmi_spec_per_pin {
 	struct hdmi_eld sink_eld;
 	struct delayed_work work;
 	int repoll_count;
+	bool non_pcm;
 };
 
 struct hdmi_spec {
@@ -550,7 +550,6 @@ static void hdmi_debug_channel_mapping(struct hda_codec *codec,
 
 static void hdmi_setup_channel_mapping(struct hda_codec *codec,
 				       hda_nid_t pin_nid,
-				       hda_nid_t cvt_nid,
 				       bool non_pcm,
 				       int ca)
 {
@@ -712,27 +711,16 @@ static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
 }
 
 static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
-					hda_nid_t cvt_nid, struct snd_pcm_substream *substream)
+				       bool non_pcm,
+				       struct snd_pcm_substream *substream)
 {
 	struct hdmi_spec *spec = codec->spec;
 	struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
-	struct hdmi_spec_per_cvt *per_cvt;
-	struct hda_spdif_out *spdif;
 	hda_nid_t pin_nid = per_pin->pin_nid;
 	int channels = substream->runtime->channels;
 	struct hdmi_eld *eld;
 	int ca;
-	int cvt_idx;
 	union audio_infoframe ai;
-	bool non_pcm = false;
-
-	cvt_idx = cvt_nid_to_cvt_index(spec, cvt_nid);
-	per_cvt = &spec->cvts[cvt_idx];
-
-	mutex_lock(&codec->spdif_mutex);
-	spdif = snd_hda_spdif_out_of_nid(codec, cvt_nid);
-	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
-	mutex_unlock(&codec->spdif_mutex);
 
 	eld = &spec->pins[pin_idx].sink_eld;
 	if (!eld->monitor_present)
@@ -775,7 +763,7 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
 			    "pin=%d channels=%d\n",
 			    pin_nid,
 			    channels);
-		hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid, non_pcm, ca);
+		hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca);
 		hdmi_stop_infoframe_trans(codec, pin_nid);
 		hdmi_fill_audio_infoframe(codec, pin_nid,
 					    ai.bytes, sizeof(ai));
@@ -783,11 +771,11 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
 	} else {
 		/* For non-pcm audio switch, setup new channel mapping
 		 * accordingly */
-		if (per_cvt->non_pcm != non_pcm)
-			hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid, non_pcm, ca);
+		if (per_pin->non_pcm != non_pcm)
+			hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca);
 	}
 
-	per_cvt->non_pcm = non_pcm;
+	per_pin->non_pcm = non_pcm;
 }
 
 
@@ -1080,6 +1068,7 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
 	per_pin = &spec->pins[pin_idx];
 
 	per_pin->pin_nid = pin_nid;
+	per_pin->non_pcm = false;
 
 	err = hdmi_read_pin_conn(codec, pin_idx);
 	if (err < 0)
@@ -1109,7 +1098,6 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 
 	per_cvt->cvt_nid = cvt_nid;
 	per_cvt->channels_min = 2;
-	per_cvt->non_pcm = false;
 	if (chans <= 16)
 		per_cvt->channels_max = chans;
 
@@ -1179,6 +1167,19 @@ static char *get_hdmi_pcm_name(int idx)
 	return &names[idx][0];
 }
 
+static bool check_non_pcm_per_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
+{
+	struct hda_spdif_out *spdif;
+	bool non_pcm;
+
+	mutex_lock(&codec->spdif_mutex);
+	spdif = snd_hda_spdif_out_of_nid(codec, cvt_nid);
+	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
+	mutex_unlock(&codec->spdif_mutex);
+	return non_pcm;
+}
+
+
 /*
  * HDMI callbacks
  */
@@ -1194,10 +1195,13 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 	int pin_idx = hinfo_to_pin_index(spec, hinfo);
 	hda_nid_t pin_nid = spec->pins[pin_idx].pin_nid;
 	int pinctl;
+	bool non_pcm;
+
+	non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
 
 	hdmi_set_channel_count(codec, cvt_nid, substream->runtime->channels);
 
-	hdmi_setup_audio_infoframe(codec, pin_idx, cvt_nid, substream);
+	hdmi_setup_audio_infoframe(codec, pin_idx, non_pcm, substream);
 
 	pinctl = snd_hda_codec_read(codec, pin_nid, 0,
 				    AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
Signature · 7 lines
1.7.11.5


_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#6 lore raw
Quoted 53 lines

-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Friday, September 07, 2012 12:00 AM
To: Wang, Xingchao
Cc: [email protected]; [email protected]; [email protected]; Wu, Fengguang
Subject: Re: [PATCH 0/3] HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips

At Thu, 06 Sep 2012 08:53:53 +0200,

Quoted 6 lines · Takashi Iwai

At Thu, 6 Sep 2012 10:02:35 +0800,

Quoted 3 lines · Wang Xingchao

As i have no A/V receiver handy and could not test HBR playback directly, i removed the "RFC" type until the patchset was tested and proved

working well.

Quoted 7 lines
Quoted 7 lines

The patchset was tested on Intel chips and get positive feedback.

Quote from "Øyvind Kvålsvoll <[email protected]>":
"TrueHD and DTS-MA work fine from XBMC, 2-ch playback also works fine from XBMC.
Channels are all mapped to the right speaker, all 7.1."

Quoted 6 lines
Quoted 6 lines

Quote from alanwww1:
"I tested the patches. They work perfectly. I tested it with both DTS Master Audio and Dolby Tru HD streams.
Also tested with speaker-test. Channel mapping was right." From:

http://forum.xbmc.org/showthread.php?tid=128298&pid=1184574#pid11845

Quoted 9 lines
Quoted 9 lines

74

Maybe there's still potential bug and i will keep on track that.

The idea of this patch comes from Anssi, Big credit to him at first! Thanks the guys from XBMC forum which help test the patches.

For people interested to test the patch, please remember to apply another change in alsa-lib side, you can refer to the patch detail from XBMC

forum:

Quoted 1 line
Quoted 1 line

http://forum.xbmc.org/showthread.php?tid=128298&pid=1178776#pid11787

Quoted 6 lines
Quoted 1 line

76

Note that the alsa-lib fix isn't necessarily applied to all systems. The bug appears only on systems with both SPDIF and HDMI.

In anyway, I applied the kernel patches now. Thanks.

Quoted 7 lines

While looking through the code again (and need to rebase my channel mapping branch), I found that the check of non-PCM should be done to each pin instead of converter. Basically the setup is done to the audio infoframe of the pin, so when the driver reconnects to another converter upon the new option, there might be inconsistency regarding non-PCM status.

So I applied the patch below in addition now.

Looks better now, Thanks Takashi.

--xingchao

Quoted 166 lines

Takashi

===

From: Takashi Iwai <[email protected]>
Subject: [PATCH] ALSA: hda - Move non-PCM check to per_pin in patch_hdmi.c

Recently the check for non-PCM stream state was added to the generic HDMI driver code. But this check should be done rather to each pin instead of each converter. Otherwise when a different converter is assigned at the next open, the audio infoframe can be inconsistent with the setup using the previous converter.

For fixing this issue, this patch moves the state of the current non-PCM status from per_cvt to per_pin. (In addition an unused argument cvt_nid is stripped from hdmi_setup_channel_mapping())

---
 sound/pci/hda/patch_hdmi.c | 46
+++++++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 21 deletions(-)
sound/pci/hda/patch_hdmi.c index renamed from sound/pci/hda/patch_hdmi.c +0 -0

5361298..333d533 100644

sound/pci/hda/patch_hdmi.c +1 -2
@@ -61,7 +61,6 @@ struct hdmi_spec_per_cvt {
 	u32 rates;
 	u64 formats;
 	unsigned int maxbps;
-	bool non_pcm;
 };
 
 struct hdmi_spec_per_pin {
@@ -73,6 +72,7 @@ struct hdmi_spec_per_pin {
 	struct hdmi_eld sink_eld;
 	struct delayed_work work;
 	int repoll_count;
+	bool non_pcm;
 };
 
 struct hdmi_spec {
@@ -550,7 +550,6 @@ static void hdmi_debug_channel_mapping(struct
 hda_codec *codec,
 
 static void hdmi_setup_channel_mapping(struct hda_codec *codec,
 				       hda_nid_t pin_nid,
-				       hda_nid_t cvt_nid,
 				       bool non_pcm,
 				       int ca)

{

sound/pci/hda/patch_hdmi.c +2 -13
@@ -712,27 +711,16 @@ static bool hdmi_infoframe_uptodate(struct
 hda_codec *codec, hda_nid_t pin_nid,  }
 
 static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
-					hda_nid_t cvt_nid, struct snd_pcm_substream
 *substream)
+				       bool non_pcm,
+				       struct snd_pcm_substream *substream)
 {
 	struct hdmi_spec *spec = codec->spec;
 	struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
-	struct hdmi_spec_per_cvt *per_cvt;
-	struct hda_spdif_out *spdif;
 	hda_nid_t pin_nid = per_pin->pin_nid;
 	int channels = substream->runtime->channels;
 	struct hdmi_eld *eld;
 	int ca;
-	int cvt_idx;
 	union audio_infoframe ai;
-	bool non_pcm = false;
-
-	cvt_idx = cvt_nid_to_cvt_index(spec, cvt_nid);
-	per_cvt = &spec->cvts[cvt_idx];
-
-	mutex_lock(&codec->spdif_mutex);
-	spdif = snd_hda_spdif_out_of_nid(codec, cvt_nid);
-	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
-	mutex_unlock(&codec->spdif_mutex);
 
 	eld = &spec->pins[pin_idx].sink_eld;
sound/pci/hda/patch_hdmi.c +1 -1
 	if (!eld->monitor_present)
@@ -775,7 +763,7 @@ static void hdmi_setup_audio_infoframe(struct
 hda_codec *codec, int pin_idx,
 			    "pin=%d channels=%d\n",
 			    pin_nid,
 			    channels);
-		hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid, non_pcm,
 ca);
+		hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca);
 		hdmi_stop_infoframe_trans(codec, pin_nid);
sound/pci/hda/patch_hdmi.c +4 -3
 		hdmi_fill_audio_infoframe(codec, pin_nid,
 					    ai.bytes, sizeof(ai));
@@ -783,11 +771,11 @@ static void hdmi_setup_audio_infoframe(struct
 hda_codec *codec, int pin_idx,
 	} else {
 		/* For non-pcm audio switch, setup new channel mapping
 		 * accordingly */
-		if (per_cvt->non_pcm != non_pcm)
-			hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid,
 non_pcm, ca);
+		if (per_pin->non_pcm != non_pcm)
+			hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca);
 	}
 
-	per_cvt->non_pcm = non_pcm;
+	per_pin->non_pcm = non_pcm;
 }
@@ -1080,6 +1068,7 @@ static int hdmi_add_pin(struct hda_codec *codec,
 hda_nid_t pin_nid)
 	per_pin = &spec->pins[pin_idx];
 
 	per_pin->pin_nid = pin_nid;
+	per_pin->non_pcm = false;
 
 	err = hdmi_read_pin_conn(codec, pin_idx);
sound/pci/hda/patch_hdmi.c +17 -2
 	if (err < 0)
@@ -1109,7 +1098,6 @@ static int hdmi_add_cvt(struct hda_codec *codec,
 hda_nid_t cvt_nid)
 
 	per_cvt->cvt_nid = cvt_nid;
 	per_cvt->channels_min = 2;
-	per_cvt->non_pcm = false;
 	if (chans <= 16)
 		per_cvt->channels_max = chans;
@@ -1179,6 +1167,19 @@ static char *get_hdmi_pcm_name(int idx)
 	return &names[idx][0];
 }
 
+static bool check_non_pcm_per_cvt(struct hda_codec *codec, hda_nid_t
+cvt_nid) {
+	struct hda_spdif_out *spdif;
+	bool non_pcm;
+
+	mutex_lock(&codec->spdif_mutex);
+	spdif = snd_hda_spdif_out_of_nid(codec, cvt_nid);
+	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
+	mutex_unlock(&codec->spdif_mutex);
+	return non_pcm;
+}
+
+
 /*
  * HDMI callbacks
  */
@@ -1194,10 +1195,13 @@ static int
 generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 	int pin_idx = hinfo_to_pin_index(spec, hinfo);
 	hda_nid_t pin_nid = spec->pins[pin_idx].pin_nid;
 	int pinctl;
+	bool non_pcm;
+
+	non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
 
 	hdmi_set_channel_count(codec, cvt_nid, substream->runtime->channels);
 
-	hdmi_setup_audio_infoframe(codec, pin_idx, cvt_nid, substream);
+	hdmi_setup_audio_infoframe(codec, pin_idx, non_pcm, substream);
 
 	pinctl = snd_hda_codec_read(codec, pin_nid, 0,
Quoted 4 lines

AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
--
1.7.11.5

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel