zeroconf: add from OE-Core

new file mode 100644
index 0000000..328e574
@@ -0,0 +1,19 @@
+| zeroconf.c: In function 'main':
+| zeroconf.c:145: error: 'PATH_MAX' undeclared (first use in this function)
+
+RP - 4/9/09
+
+Upstream-Status: Pending
+
+Index: zeroconf-0.9/zeroconf.c
+===================================================================
+--- zeroconf-0.9.orig/zeroconf.c	2009-09-04 10:05:25.000000000 +0100
++++ zeroconf-0.9/zeroconf.c	2009-09-04 10:05:42.000000000 +0100
+@@ -33,6 +33,7 @@
+ #include <net/if_arp.h>
+ #include <sys/time.h>
+ #include <signal.h>
++#include <limits.h>
+ 
+ #include "delay.h"
+ 

51 lines not on this page · raw message

new file mode 100644
index 0000000..cc07b27
@@ -0,0 +1,17 @@
+# Default for zeroconf
+
+# disable zeroconf
+# If you want to disable zeroconf completely, uncomment the following line
+# this may be useful if you are debugging zeroconf or starting it manually
+#DISABLE=yes
+
+# black-listed interfaces
+# Interfaces which you never wish to have zeroconf run on should
+# be listed here. e.g. "eth2 wlan1" in a space seperated string
+IFBLACKLIST=""
+
+# fallback only
+# If you would only like a link-local address if you were unable to
+# obtain an address via DHCP then uncomment the following line
+#FALLBACK=yes
+

new file mode 100644
index 0000000..f755940
@@ -0,0 +1,34 @@
+SUMMARY = "IPv4 link-local address allocator"
+DESCRIPTION = "Zeroconf is a program that is used to claim IPv4 \
+link-local addresses. IPv4 link-local addresses are useful when setting \
+up ad-hoc networking between devices without the involvement of a either \
+a DHCP server or network administrator. \
+These addresses are allocated from the 169.254.0.0/16 address range and \
+are normally attached to each Ethernet device in your computer. \
+Addresses are assigned randomly by each host and, in case of collision, \
+both hosts (are supposed to) renumber."
+AUTHOR = "Anand Kumria <[email protected]>"
+HOMEPAGE = "http://www.progsoc.org/~wildfire/zeroconf/"
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=4325afd396febcb659c36b49533135d4 \
+                    file://zeroconf.c;beginline=1;endline=13;md5=a5bada96e1e34b08eb7446b28e2630b2"
+SECTION = "net"
+
+PR = "r1"
+
+SRC_URI = "http://www.progsoc.org/~wildfire/zeroconf/download/${BPN}-${PV}.tar.gz \
+           file://compilefix.patch \
+           file://zeroconf-default \
+           file://debian-zeroconf"
+
+SRC_URI[md5sum] = "bdafb16b008ebb5633e4e581f77821d2"
+SRC_URI[sha256sum] = "a8c74df127753e2310fa1e072f3c9ca44a404bb0bbce9cfec7a84c6dff8bec7b"
+
+do_install () {
+	install -d ${D}${sbindir}
+	install -d ${D}${sysconfdir}/network/if-up.d
+	install -d ${D}${sysconfdir}/default
+	install -c -m 755 ${S}/zeroconf ${D}${sbindir}/zeroconf
+	install -c -m 755 ${WORKDIR}/debian-zeroconf ${D}${sysconfdir}/network/if-up.d/zeroconf
+	install -c ${WORKDIR}/zeroconf-default ${D}${sysconfdir}/default/zeroconf
+}