quick_dump: A dump utility different than reg_dumper
RFC PATCH 1/1 quick_dump: A dump utility different than reg_dumper
intel_reg_dumper is cool. However, doing bit decoding and dealing with moving registers from generation to generation (and in some cases just steppings) becomes a bit of a burden over time. It's also not completely necessary when doing the not-so-uncommon diff against some other BIOS debug.
While I do not want this tool to replace intel_reg_dumper, I think it has it's uses. The target is particularly for power-on like situations where we want to easily add profiles with new registers, and not lose the old information. Doing this in the existing reg dumper can be a bit tedious and sometimes error prone. It also is a nice place to add registers which may or may not actually be useful. Ones which prove useful over time should get moved to reg dumper.
The tool provides a fast way to add new registers, and register profiles as we bring up new platforms, or try to share debug information. This is accomplished by defining python tuples in text files, and adding them to profiles, which are just a list of the files containing tuples.
I defined a few "base" files which is essentially the previous reg_dumper registers + some other interesting ones. These are automatically used unless the user supplies the "baseless" option. The base should be pretty decent for all recent generation chips with the exception of valleyview. On top of this, I provided some starter
profiles: ivybridge, sandybridge, and valleyview.
NOTE: the valleyview profile is currently a work in progress.
So to get a quick sandybridge dump for instance:
sudo ./quick_dump.py sandybridge
Feedback please.
--- tools/quick_dump/base_display.txt | 197 ++++++++++++++++++++++++++++++++++++ tools/quick_dump/base_interrupt.txt | 20 ++++ tools/quick_dump/base_other.txt | 6 ++ tools/quick_dump/base_power.txt | 21 ++++ tools/quick_dump/base_rings.txt | 27 +++++ tools/quick_dump/gen6_other.txt | 1 + tools/quick_dump/gen7_other.txt | 1 + tools/quick_dump/ivybridge | 1 + tools/quick_dump/quick_dump.py | 34 +++++++ tools/quick_dump/sandybridge | 1 + tools/quick_dump/valleyview | 6 ++ tools/quick_dump/vlv_display.txt | 197 ++++++++++++++++++++++++++++++++++++ 12 files changed, 512 insertions(+) create mode 100644 tools/quick_dump/base_display.txt create mode 100644 tools/quick_dump/base_interrupt.txt create mode 100644 tools/quick_dump/base_other.txt create mode 100644 tools/quick_dump/base_power.txt create mode 100644 tools/quick_dump/base_rings.txt create mode 100644 tools/quick_dump/gen6_other.txt create mode 100644 tools/quick_dump/gen7_other.txt create mode 100644 tools/quick_dump/ivybridge create mode 100755 tools/quick_dump/quick_dump.py create mode 100644 tools/quick_dump/sandybridge create mode 100644 tools/quick_dump/valleyview create mode 100644 tools/quick_dump/vlv_display.txt
tools/quick_dump/base_display.txt new file +197 -0
@@ -0,0 +1,197 @@ +('CPU_VGACNTRL', '0x00041000', '') +('PORT_DBG', '0x00042308', '') +('DIGITAL_PORT_HOTPLUG_CNTRL', '0x00044030', '') +('FDI_PLL_BIOS_0', '0x00046000', '') +('FDI_PLL_BIOS_1', '0x00046004', '') +('FDI_PLL_BIOS_2', '0x00046008', '') +('DISPLAY_PORT_PLL_BIOS_0', '0x0004600c', '') +('DISPLAY_PORT_PLL_BIOS_1', '0x00046010', '') +('DISPLAY_PORT_PLL_BIOS_2', '0x00046014', '') +('FDI_PLL_FREQ_CTL', '0x00046030', '') +('BLC_PWM_CPU_CTL2', '0x00048250', '') +('BLC_PWM_CPU_CTL', '0x00048254', '') +('HTOTAL_A', '0x00060000', '') +('HBLANK_A', '0x00060004', '') +('HSYNC_A', '0x00060008', '') +('VTOTAL_A', '0x0006000c', '') +('VBLANK_A', '0x00060010', '') +('VSYNC_A', '0x00060014', '') +('PIPEASRC', '0x0006001c', '') +('VSYNCSHIFT_A', '0x00060028', '') +('PIPEA_DATA_M1', '0x00060030', '') +('PIPEA_DATA_N1', '0x00060034', '') +('PIPEA_DATA_M2', '0x00060038', '') +('PIPEA_DATA_N2', '0x0006003c', '') +('PIPEA_LINK_M1', '0x00060040', '') +('PIPEA_LINK_N1', '0x00060044', '') +('PIPEA_LINK_M2', '0x00060048', '') +('PIPEA_LINK_N2', '0x0006004c', '') +('FDI_TXA_CTL', '0x00060100', '') +('HTOTAL_B', '0x00061000', '') +('HBLANK_B', '0x00061004', '') +('HSYNC_B', '0x00061008', '') +('VTOTAL_B', '0x0006100c', '') +('VBLANK_B', '0x00061010', '') +('VSYNC_B', '0x00061014', '') +('PIPEBSRC', '0x0006101c', '') +('VSYNCSHIFT_B', '0x00061028', '') +('PIPEB_DATA_M1', '0x00061030', '') +('PIPEB_DATA_N1', '0x00061034', '') +('PIPEB_DATA_M2', '0x00061038', '') +('PIPEB_DATA_N2', '0x0006103c', '') +('PIPEB_LINK_M1', '0x00061040', '') +('PIPEB_LINK_N1', '0x00061044', '') +('PIPEB_LINK_M2', '0x00061048', '') +('PIPEB_LINK_N2', '0x0006104c', '') +('FDI_TXB_CTL', '0x00061100', '') +('HTOTAL_C', '0x00062000', '') +('HBLANK_C', '0x00062004', '') +('HSYNC_C', '0x00062008', '') +('VTOTAL_C', '0x0006200c', '') +('VBLANK_C', '0x00062010', '') +('VSYNC_C', '0x00062014', '') +('PIPECSRC', '0x0006201c', '') +('VSYNCSHIFT_C', '0x00062028', '') +('PIPEC_DATA_M1', '0x00062030', '') +('PIPEC_DATA_N1', '0x00062034', '') +('PIPEC_DATA_M2', '0x00062038', '') +('PIPEC_DATA_N2', '0x0006203c', '') +('PIPEC_LINK_M1', '0x00062040', '') +('PIPEC_LINK_N1', '0x00062044', '') +('PIPEC_LINK_M2', '0x00062048', '') +('PIPEC_LINK_N2', '0x0006204c', '') +('FDI_TXC_CTL', '0x00062100', '') +('CPU_eDP_A', '0x00064000', '') +('PFA_WIN_POS', '0x00068070', '') +('PFA_WIN_SIZE', '0x00068074', '') +('PFA_CTL_1', '0x00068080', '') +('PFA_CTL_2', '0x00068084', '') +('PFA_CTL_3', '0x00068088', '') +('PFA_CTL_4', '0x00068090', '') +('PFB_WIN_POS', '0x00068870', '') +('PFB_WIN_SIZE', '0x00068874', '') +('PFB_CTL_1', '0x00068880', '') +('PFB_CTL_2', '0x00068884', '') +('PFB_CTL_3', '0x00068888', '') +('PFB_CTL_4', '0x00068890', '') +('PFC_WIN_POS', '0x00069070', '') +('PFC_WIN_SIZE', '0x00069074', '') +('PFC_CTL_1', '0x00069080', '') +('PFC_CTL_2', '0x00069084', '') +('PFC_CTL_3', '0x00069088', '') +('PFC_CTL_4', '0x00069090', '') +('PIPEACONF', '0x00070008', '') +('DSPACNTR', '0x00070180', '') +('DSPABASE', '0x00070184', '') +('DSPASTRIDE', '0x00070188', '') +('DSPASURF', '0x0007019c', '') +('DSPATILEOFF', '0x000701a4', '') +('PIPEBCONF', '0x00071008', '') +('DSPBCNTR', '0x00071180', '') +('DSPBBASE', '0x00071184', '') +('DSPBSTRIDE', '0x00071188', '') +('DSPBSURF', '0x0007119c', '') +('DSPBTILEOFF', '0x000711a4', '') +('PIPECCONF', '0x00072008', '') +('DSPCCNTR', '0x00072180', '') +('DSPCBASE', '0x00072184', '') +('DSPCSTRIDE', '0x00072188', '') +('DSPCSURF', '0x0007219c', '') +('DSPCTILEOFF', '0x000721a4', '') +('PCH_DPLL_A', '0x000c6014', '') +('PCH_DPLL_B', '0x000c6018', '') +('PCH_FPA0', '0x000c6040', '') +('PCH_FPA1', '0x000c6044', '') +('PCH_FPB0', '0x000c6048', '') +('PCH_FPB1', '0x000c604c', '') +('PCH_DREF_CONTROL', '0x000c6200', '') +('PCH_RAWCLK_FREQ', '0x000c6204', '') +('PCH_DPLL_TMR_CFG', '0x000c6208', '') +('PCH_SSC4_PARMS', '0x000c6210', '') +('PCH_SSC4_AUX_PARMS', '0x000c6214', '') +('PCH_DPLL_ANALOG_CTL', '0x000c6300', '') +('PCH_DPLL_SEL', '0x000c7000', '') +('PCH_PP_STATUS', '0x000c7200', '') +('PCH_PP_CONTROL', '0x000c7204', '') +('PCH_PP_ON_DELAYS', '0x000c7208', '') +('PCH_PP_OFF_DELAYS', '0x000c720c', '') +('PCH_PP_DIVISOR', '0x000c7210', '') +('BLC_PWM_PCH_CTL1', '0x000c8250', '') +('BLC_PWM_PCH_CTL2', '0x000c8254', '') +('TRANS_HTOTAL_A', '0x000e0000', '') +('TRANS_HBLANK_A', '0x000e0004', '') +('TRANS_HSYNC_A', '0x000e0008', '') +('TRANS_VTOTAL_A', '0x000e000c', '') +('TRANS_VBLANK_A', '0x000e0010', '') +('TRANS_VSYNC_A', '0x000e0014', '') +('TRANS_VSYNCSHIFT_A', '0x000e0028', '') +('TRANSA_DATA_M1', '0x000e0030', '') +('TRANSA_DATA_N1', '0x000e0034', '') +('TRANSA_DATA_M2', '0x000e0038', '') +('TRANSA_DATA_N2', '0x000e003c', '') +('TRANSA_DP_LINK_M1', '0x000e0040', '') +('TRANSA_DP_LINK_N1', '0x000e0044', '') +('TRANSA_DP_LINK_M2', '0x000e0048', '') +('TRANSA_DP_LINK_N2', '0x000e004c', '') +('TRANS_DP_CTL_A', '0x000e0300', '') +('TRANS_HTOTAL_B', '0x000e1000', '') +('TRANS_HBLANK_B', '0x000e1004', '') +('TRANS_HSYNC_B', '0x000e1008', '') +('TRANS_VTOTAL_B', '0x000e100c', '') +('TRANS_VBLANK_B', '0x000e1010', '') +('TRANS_VSYNC_B', '0x000e1014', '') +('TRANS_VSYNCSHIFT_B', '0x000e1028', '') +('TRANSB_DATA_M1', '0x000e1030', '') +('TRANSB_DATA_N1', '0x000e1034', '') +('TRANSB_DATA_M2', '0x000e1038', '') +('TRANSB_DATA_N2', '0x000e103c', '') +('TRANSB_DP_LINK_M1', '0x000e1040', '') +('TRANSB_DP_LINK_N1', '0x000e1044', '') +('TRANSB_DP_LINK_M2', '0x000e1048', '') +('TRANSB_DP_LINK_N2', '0x000e104c', '') +('PCH_ADPA', '0x000e1100', '') +('HDMIB', '0x000e1140', '') +('HDMIC', '0x000e1150', '') +('HDMID', '0x000e1160', '') +('PCH_LVDS', '0x000e1180', '') +('TRANS_DP_CTL_B', '0x000e1300', '') +('TRANS_HTOTAL_C', '0x000e2000', '') +('TRANS_HBLANK_C', '0x000e2004', '') +('TRANS_HSYNC_C', '0x000e2008', '') +('TRANS_VTOTAL_C', '0x000e200c', '') +('TRANS_VBLANK_C', '0x000e2010', '') +('TRANS_VSYNC_C', '0x000e2014', '') +('TRANS_VSYNCSHIFT_C', '0x000e2028', '') +('TRANSC_DATA_M1', '0x000e2030', '') +('TRANSC_DATA_N1', '0x000e2034', '') +('TRANSC_DATA_M2', '0x000e2038', '') +('TRANSC_DATA_N2', '0x000e203c', '') +('TRANSC_DP_LINK_M1', '0x000e2040', '') +('TRANSC_DP_LINK_N1', '0x000e2044', '') +('TRANSC_DP_LINK_M2', '0x000e2048', '') +('TRANSC_DP_LINK_N2', '0x000e204c', '') +('TRANS_DP_CTL_C', '0x000e2300', '') +('PCH_DP_B', '0x000e4100', '') +('PCH_DP_C', '0x000e4200', '') +('PCH_DP_D', '0x000e4300', '') +('TRANSACONF', '0x000f0008', '') +('FDI_RXA_CTL', '0x000f000c', '') +('FDI_RXA_MISC', '0x000f0010', '') +('FDI_RXA_IIR', '0x000f0014', '') +('FDI_RXA_IMR', '0x000f0018', '') +('FDI_RXA_TUSIZE1', '0x000f0030', '') +('FDI_RXA_TUSIZE2', '0x000f0038', '') +('TRANSBCONF', '0x000f1008', '') +('FDI_RXB_CTL', '0x000f100c', '') +('FDI_RXB_MISC', '0x000f1010', '') +('FDI_RXB_IIR', '0x000f1014', '') +('FDI_RXB_IMR', '0x000f1018', '') +('FDI_RXB_TUSIZE1', '0x000f1030', '') +('FDI_RXB_TUSIZE2', '0x000f1038', '') +('TRANSCCONF', '0x000f2008', '') +('FDI_RXC_CTL', '0x000f200c', '') +('FDI_RXC_MISC', '0x000f2010', '') +('FDI_RXC_TUSIZE1', '0x000f2030', '') +('FDI_RXC_TUSIZE2', '0x000f2038', '') +('FDI_PLL_CTL_1', '0x000fe000', '') +('FDI_PLL_CTL_2', '0x000fe004', '')
tools/quick_dump/base_interrupt.txt new file +20 -0
@@ -0,0 +1,20 @@ +('GEN6_PMINTRMSK', '0x0000a168', '') +('DEISR', '0x00044000', '') +('DEIMR', '0x00044004', '') +('DEIIR', '0x00044008', '') +('DEIER', '0x0004400c', '') +('GTISR', '0x00044010', '') +('GTIMR', '0x00044014', '') +('GTIIR', '0x00044018', '') +('GTIER', '0x0004401c', '') +('GEN6_PMISR', '0x00044020', '') +('GEN6_PMIMR', '0x00044024', '') +('GEN6_PMIIR', '0x00044028', '') +('GEN6_PMIER', '0x0004402c', '') +('SDEISR', '0x000c4000', '') +('SDEIMR', '0x000c4004', '') +('SDEIIR', '0x000c4008', '') +('SDEIER', '0x000c400c', '') +('RENDER_IMR', '0x000020a8', '') +('BSD_IMR', '0x000120a8', '') +('BLT_IMR', '0x000220a8', '')
tools/quick_dump/base_other.txt new file +6 -0
@@ -0,0 +1,6 @@ +('PGETBL_CTL', '0x00002020', '') +('MI_MODE', '0x0000209c', '') +('ERROR_GEN6', '0x000040a0', '') +('RENDER_HWSTAM', '0x00002098', '') +('GEN6_BSD_HWSTAM', '0x00012098', '') +('GEN6_BLITTER_HWSTAM', '0x00022098', '')
tools/quick_dump/base_power.txt new file +21 -0
@@ -0,0 +1,21 @@ +('GEN6_RPNSWREQ', '0x0000a008', '') +('GEN6_RC_VIDEO_FREQ', '0x0000a00c', '') +('GEN6_RP_DOWN_TIMEOUT', '0x0000a010', '') +('GEN6_RP_INTERRUPT_LIMITS', '0x0000a014', '') +('GEN6_RP_CONTROL', '0x0000a024', '') +('GEN6_RP_UP_THRESHOLD', '0x0000a02c', '') +('GEN6_RP_UP_EI', '0x0000a068', '') +('GEN6_RP_DOWN_EI', '0x0000a06c', '') +('GEN6_RP_IDLE_HYSTERSIS', '0x0000a070', '') +('GEN6_RC_CONTROL', '0x0000a090', '') +('GEN6_RC_STATE', '0x0000a094', '') +('GEN6_RC1_WAKE_RATE_LIMIT', '0x0000a098', '') +('GEN6_RC6_WAKE_RATE_LIMIT', '0x0000a09c', '') +('GEN6_RC_EVALUATION_INTERVAL', '0x0000a0a8', '') +('GEN6_RC_IDLE_HYSTERSIS', '0x0000a0ac', '') +('GEN6_RC_SLEEP', '0x0000a0b0', '') +('GEN6_RC1e_THRESHOLD', '0x0000a0b4', '') +('GEN6_RC6_THRESHOLD', '0x0000a0b8', '') +('RC6_RESIDENCY_TIME', '0x00138108', '') +('RC6p_RESIDENCY_TIME', '0x0013810c', '') +('RC6pp_RESIDENCY_TIME', '0x00138110', '')
tools/quick_dump/base_rings.txt new file +27 -0
@@ -0,0 +1,27 @@ +('RENDER_INSTPM', '0x20c0', '') +('BSD_INSTPM', '0x120c0', '') +('BLT_INSTPM', '0x220c0', '') +('RENDER_RING_HEAD', '0x2034', '') +('BSD_RING_HEAD', '0x12034', '') +('BLT_RING_HEAD', '0x22034', '') +('RENDER_IPEIR', '0x2064', '') +('BSD_IPEIR', '0x12064', '') +('BLT_IPEIR', '0x22064', '') +('RENDER_IPEHR', '0x2068', '') +('BSD_IPEHR', '0x12068', '') +('BLT_IPEHR', '0x22068', '') +('RENDER_INSTDONE', '0x206c', '') +('BSD_INSTDONE', '0x1206c', '') +('BLT_INSTDONE', '0x2206c', '') +('RENDER_INSTPS', '0x2070', '') +('BSD_INSTPS', '0x12070', '') +('BLT_INSTPS', '0x22070', '') +('RENDER_RING_ACTHD', '0x2074', '') +('BSD_RING_ACTHD', '0x12074', '') +('BLT_RING_ACTHD', '0x22074', '') +('RENDER_FADDR', '0x2078', '') +('BSD_FADDR', '0x12078', '') +('BLT_FADDR', '0x22078', '') +('RENDER_RING_TAIL', '0x2030', '') +('BSD_RING_TAIL', '0x12030', '') +('BLT_RING_TAIL', '0x22030', '')
tools/quick_dump/gen6_other.txt new file +1 -0
@@ -0,0 +1 @@ +('GFX_MODE', '0x00002520', '')
tools/quick_dump/gen7_other.txt new file +1 -0
@@ -0,0 +1 @@ +('GFX_MODE_GEN7', '0x0000229c', '')
tools/quick_dump/ivybridge new file +1 -0
@@ -0,0 +1 @@ +gen7_other.txt
tools/quick_dump/quick_dump.py new file +34 -0
@@ -0,0 +1,34 @@ +#!/usr/bin/env python3 + +import argparse +import os +import sys +import ast +import subprocess + +def parse_file(file): + for line in file: + register = ast.literal_eval(line) + value = subprocess.check_output(["../intel_reg_read", register[1]]) + value = value.decode('UTF-8') # convert the byte array to string + value = value.rstrip() #dump the newline + value = value.split(':') #output is 'addr : offset' + print(value[0], "(", register[0], ")", value[1]) + + +parser = argparse.ArgumentParser(description='Dumb register dumper.') +parser.add_argument('-b', '--baseless', action='store_true', default=True, help='baseless mode, ignore files starting with base_') +parser.add_argument('profile', nargs='?', type=argparse.FileType('r'), default=None) +args = parser.parse_args() + +#parse anything named base_ these are assumed to apply for all gens. +if args.baseless == False: + for root, dirs, files in os.walk('.'): + for name in files: + if name.startswith(("base_")): + file = open(name.rstrip(), 'r') + parse_file(file) + +for extra in args.profile: + extra_file = open(extra.rstrip(), 'r') + parse_file(extra_file)
tools/quick_dump/sandybridge new file +1 -0
@@ -0,0 +1 @@ +gen6_other.txt
tools/quick_dump/valleyview new file +6 -0
@@ -0,0 +1,6 @@ +vlv_display.txt +base_interrupt.txt +base_other.txt +base_power.txt +base_rings.txt +ivybridge
tools/quick_dump/vlv_display.txt new file +197 -0
197 lines not on this page · raw message
Signature · 1 line
1.7.12
Quoted 26 lines · Ben Widawsky
intel_reg_dumperis cool. However, doing bit decoding and dealing with moving registers from generation to generation (and in some cases just steppings) becomes a bit of a burden over time. It's also not completely necessary when doing the not-so-uncommon diff against some other BIOS debug.While I do not want this tool to replace
intel_reg_dumper, I think it has it's uses. The target is particularly for power-on like situations where we want to easily add profiles with new registers, and not lose the old information. Doing this in the existing reg dumper can be a bit tedious and sometimes error prone. It also is a nice place to add registers which may or may not actually be useful. Ones which prove useful over time should get moved to reg dumper.The tool provides a fast way to add new registers, and register profiles as we bring up new platforms, or try to share debug information. This is accomplished by defining python tuples in text files, and adding them to profiles, which are just a list of the files containing tuples.
I defined a few "base" files which is essentially the previous
reg_dumperregisters + some other interesting ones. These are automatically used unless the user supplies the "baseless" option. The base should be pretty decent for all recent generation chips with the exception of valleyview. On top of this, I provided some starter
profiles: ivybridge, sandybridge, and valleyview.
Quoted 6 lines
NOTE: the valleyview profile is currently a work in progress.
So to get a quick sandybridge dump for instance:
sudo ./quick_dump.py sandybridgeFeedback please.
I've wasted a few brain-cycles on the dump problem recently, too - pimping intel_reg_dumper is rather obviously a pain. Two ideas:
- create a script that slurps in internal Bspec xml. The issue here is that I don't know how to handle regs with read-sideeffects (yep, we have those). Maybe manual blacklist. The upside is that this would hopefully allow auto-decoding of the bitfields (if we pimp the xml slurper sufficiently). Also, if we can get at the xml for the open-source Bspec, we could use this tool to auto-create a per-gen open-source reg slurper. Generally I fear that this approach is too messy and noisy and hence intel_reg_dumper pimping probably better.
- Another idea is to just dump entire register blocks for functional units with a header per block (e.g. "PLANE_A") and then offset : value hexvalue paris per line. That might be useful for quick&dirty comparison for bringup.
And a quick comment on your approach here: I'm not too sure whether the file-base register block approach scales, respectively why exactly this is better than frobbing the reg_dumper tool. Since that one has the concept of register blocks already, too.
Cheers, Daniel
Quoted 621 lines
CC Jesse Barnes <[email protected]>Signed-off-by Ben Widawsky <[email protected]>--- tools/quick_dump/base_display.txt | 197 ++++++++++++++++++++++++++++++++++++ tools/quick_dump/base_interrupt.txt | 20 ++++ tools/quick_dump/base_other.txt | 6 ++ tools/quick_dump/base_power.txt | 21 ++++ tools/quick_dump/base_rings.txt | 27 +++++ tools/quick_dump/gen6_other.txt | 1 + tools/quick_dump/gen7_other.txt | 1 + tools/quick_dump/ivybridge | 1 + tools/quick_dump/quick_dump.py | 34 +++++++ tools/quick_dump/sandybridge | 1 + tools/quick_dump/valleyview | 6 ++ tools/quick_dump/vlv_display.txt | 197 ++++++++++++++++++++++++++++++++++++ 12 files changed, 512 insertions(+) create mode 100644 tools/quick_dump/base_display.txt create mode 100644 tools/quick_dump/base_interrupt.txt create mode 100644 tools/quick_dump/base_other.txt create mode 100644 tools/quick_dump/base_power.txt create mode 100644 tools/quick_dump/base_rings.txt create mode 100644 tools/quick_dump/gen6_other.txt create mode 100644 tools/quick_dump/gen7_other.txt create mode 100644 tools/quick_dump/ivybridge create mode 100755 tools/quick_dump/quick_dump.py create mode 100644 tools/quick_dump/sandybridge create mode 100644 tools/quick_dump/valleyview create mode 100644 tools/quick_dump/vlv_display.txttools/quick_dump/base_display.txt new file +197
-0@@ -0,0 +1,197 @@ +('CPU_VGACNTRL', '0x00041000', '') +('PORT_DBG', '0x00042308', '') +('DIGITAL_PORT_HOTPLUG_CNTRL', '0x00044030', '') +('FDI_PLL_BIOS_0', '0x00046000', '') +('FDI_PLL_BIOS_1', '0x00046004', '') +('FDI_PLL_BIOS_2', '0x00046008', '') +('DISPLAY_PORT_PLL_BIOS_0', '0x0004600c', '') +('DISPLAY_PORT_PLL_BIOS_1', '0x00046010', '') +('DISPLAY_PORT_PLL_BIOS_2', '0x00046014', '') +('FDI_PLL_FREQ_CTL', '0x00046030', '') +('BLC_PWM_CPU_CTL2', '0x00048250', '') +('BLC_PWM_CPU_CTL', '0x00048254', '') +('HTOTAL_A', '0x00060000', '') +('HBLANK_A', '0x00060004', '') +('HSYNC_A', '0x00060008', '') +('VTOTAL_A', '0x0006000c', '') +('VBLANK_A', '0x00060010', '') +('VSYNC_A', '0x00060014', '') +('PIPEASRC', '0x0006001c', '') +('VSYNCSHIFT_A', '0x00060028', '') +('PIPEA_DATA_M1', '0x00060030', '') +('PIPEA_DATA_N1', '0x00060034', '') +('PIPEA_DATA_M2', '0x00060038', '') +('PIPEA_DATA_N2', '0x0006003c', '') +('PIPEA_LINK_M1', '0x00060040', '') +('PIPEA_LINK_N1', '0x00060044', '') +('PIPEA_LINK_M2', '0x00060048', '') +('PIPEA_LINK_N2', '0x0006004c', '') +('FDI_TXA_CTL', '0x00060100', '') +('HTOTAL_B', '0x00061000', '') +('HBLANK_B', '0x00061004', '') +('HSYNC_B', '0x00061008', '') +('VTOTAL_B', '0x0006100c', '') +('VBLANK_B', '0x00061010', '') +('VSYNC_B', '0x00061014', '') +('PIPEBSRC', '0x0006101c', '') +('VSYNCSHIFT_B', '0x00061028', '') +('PIPEB_DATA_M1', '0x00061030', '') +('PIPEB_DATA_N1', '0x00061034', '') +('PIPEB_DATA_M2', '0x00061038', '') +('PIPEB_DATA_N2', '0x0006103c', '') +('PIPEB_LINK_M1', '0x00061040', '') +('PIPEB_LINK_N1', '0x00061044', '') +('PIPEB_LINK_M2', '0x00061048', '') +('PIPEB_LINK_N2', '0x0006104c', '') +('FDI_TXB_CTL', '0x00061100', '') +('HTOTAL_C', '0x00062000', '') +('HBLANK_C', '0x00062004', '') +('HSYNC_C', '0x00062008', '') +('VTOTAL_C', '0x0006200c', '') +('VBLANK_C', '0x00062010', '') +('VSYNC_C', '0x00062014', '') +('PIPECSRC', '0x0006201c', '') +('VSYNCSHIFT_C', '0x00062028', '') +('PIPEC_DATA_M1', '0x00062030', '') +('PIPEC_DATA_N1', '0x00062034', '') +('PIPEC_DATA_M2', '0x00062038', '') +('PIPEC_DATA_N2', '0x0006203c', '') +('PIPEC_LINK_M1', '0x00062040', '') +('PIPEC_LINK_N1', '0x00062044', '') +('PIPEC_LINK_M2', '0x00062048', '') +('PIPEC_LINK_N2', '0x0006204c', '') +('FDI_TXC_CTL', '0x00062100', '') +('CPU_eDP_A', '0x00064000', '') +('PFA_WIN_POS', '0x00068070', '') +('PFA_WIN_SIZE', '0x00068074', '') +('PFA_CTL_1', '0x00068080', '') +('PFA_CTL_2', '0x00068084', '') +('PFA_CTL_3', '0x00068088', '') +('PFA_CTL_4', '0x00068090', '') +('PFB_WIN_POS', '0x00068870', '') +('PFB_WIN_SIZE', '0x00068874', '') +('PFB_CTL_1', '0x00068880', '') +('PFB_CTL_2', '0x00068884', '') +('PFB_CTL_3', '0x00068888', '') +('PFB_CTL_4', '0x00068890', '') +('PFC_WIN_POS', '0x00069070', '') +('PFC_WIN_SIZE', '0x00069074', '') +('PFC_CTL_1', '0x00069080', '') +('PFC_CTL_2', '0x00069084', '') +('PFC_CTL_3', '0x00069088', '') +('PFC_CTL_4', '0x00069090', '') +('PIPEACONF', '0x00070008', '') +('DSPACNTR', '0x00070180', '') +('DSPABASE', '0x00070184', '') +('DSPASTRIDE', '0x00070188', '') +('DSPASURF', '0x0007019c', '') +('DSPATILEOFF', '0x000701a4', '') +('PIPEBCONF', '0x00071008', '') +('DSPBCNTR', '0x00071180', '') +('DSPBBASE', '0x00071184', '') +('DSPBSTRIDE', '0x00071188', '') +('DSPBSURF', '0x0007119c', '') +('DSPBTILEOFF', '0x000711a4', '') +('PIPECCONF', '0x00072008', '') +('DSPCCNTR', '0x00072180', '') +('DSPCBASE', '0x00072184', '') +('DSPCSTRIDE', '0x00072188', '') +('DSPCSURF', '0x0007219c', '') +('DSPCTILEOFF', '0x000721a4', '') +('PCH_DPLL_A', '0x000c6014', '') +('PCH_DPLL_B', '0x000c6018', '') +('PCH_FPA0', '0x000c6040', '') +('PCH_FPA1', '0x000c6044', '') +('PCH_FPB0', '0x000c6048', '') +('PCH_FPB1', '0x000c604c', '') +('PCH_DREF_CONTROL', '0x000c6200', '') +('PCH_RAWCLK_FREQ', '0x000c6204', '') +('PCH_DPLL_TMR_CFG', '0x000c6208', '') +('PCH_SSC4_PARMS', '0x000c6210', '') +('PCH_SSC4_AUX_PARMS', '0x000c6214', '') +('PCH_DPLL_ANALOG_CTL', '0x000c6300', '') +('PCH_DPLL_SEL', '0x000c7000', '') +('PCH_PP_STATUS', '0x000c7200', '') +('PCH_PP_CONTROL', '0x000c7204', '') +('PCH_PP_ON_DELAYS', '0x000c7208', '') +('PCH_PP_OFF_DELAYS', '0x000c720c', '') +('PCH_PP_DIVISOR', '0x000c7210', '') +('BLC_PWM_PCH_CTL1', '0x000c8250', '') +('BLC_PWM_PCH_CTL2', '0x000c8254', '') +('TRANS_HTOTAL_A', '0x000e0000', '') +('TRANS_HBLANK_A', '0x000e0004', '') +('TRANS_HSYNC_A', '0x000e0008', '') +('TRANS_VTOTAL_A', '0x000e000c', '') +('TRANS_VBLANK_A', '0x000e0010', '') +('TRANS_VSYNC_A', '0x000e0014', '') +('TRANS_VSYNCSHIFT_A', '0x000e0028', '') +('TRANSA_DATA_M1', '0x000e0030', '') +('TRANSA_DATA_N1', '0x000e0034', '') +('TRANSA_DATA_M2', '0x000e0038', '') +('TRANSA_DATA_N2', '0x000e003c', '') +('TRANSA_DP_LINK_M1', '0x000e0040', '') +('TRANSA_DP_LINK_N1', '0x000e0044', '') +('TRANSA_DP_LINK_M2', '0x000e0048', '') +('TRANSA_DP_LINK_N2', '0x000e004c', '') +('TRANS_DP_CTL_A', '0x000e0300', '') +('TRANS_HTOTAL_B', '0x000e1000', '') +('TRANS_HBLANK_B', '0x000e1004', '') +('TRANS_HSYNC_B', '0x000e1008', '') +('TRANS_VTOTAL_B', '0x000e100c', '') +('TRANS_VBLANK_B', '0x000e1010', '') +('TRANS_VSYNC_B', '0x000e1014', '') +('TRANS_VSYNCSHIFT_B', '0x000e1028', '') +('TRANSB_DATA_M1', '0x000e1030', '') +('TRANSB_DATA_N1', '0x000e1034', '') +('TRANSB_DATA_M2', '0x000e1038', '') +('TRANSB_DATA_N2', '0x000e103c', '') +('TRANSB_DP_LINK_M1', '0x000e1040', '') +('TRANSB_DP_LINK_N1', '0x000e1044', '') +('TRANSB_DP_LINK_M2', '0x000e1048', '') +('TRANSB_DP_LINK_N2', '0x000e104c', '') +('PCH_ADPA', '0x000e1100', '') +('HDMIB', '0x000e1140', '') +('HDMIC', '0x000e1150', '') +('HDMID', '0x000e1160', '') +('PCH_LVDS', '0x000e1180', '') +('TRANS_DP_CTL_B', '0x000e1300', '') +('TRANS_HTOTAL_C', '0x000e2000', '') +('TRANS_HBLANK_C', '0x000e2004', '') +('TRANS_HSYNC_C', '0x000e2008', '') +('TRANS_VTOTAL_C', '0x000e200c', '') +('TRANS_VBLANK_C', '0x000e2010', '') +('TRANS_VSYNC_C', '0x000e2014', '') +('TRANS_VSYNCSHIFT_C', '0x000e2028', '') +('TRANSC_DATA_M1', '0x000e2030', '') +('TRANSC_DATA_N1', '0x000e2034', '') +('TRANSC_DATA_M2', '0x000e2038', '') +('TRANSC_DATA_N2', '0x000e203c', '') +('TRANSC_DP_LINK_M1', '0x000e2040', '') +('TRANSC_DP_LINK_N1', '0x000e2044', '') +('TRANSC_DP_LINK_M2', '0x000e2048', '') +('TRANSC_DP_LINK_N2', '0x000e204c', '') +('TRANS_DP_CTL_C', '0x000e2300', '') +('PCH_DP_B', '0x000e4100', '') +('PCH_DP_C', '0x000e4200', '') +('PCH_DP_D', '0x000e4300', '') +('TRANSACONF', '0x000f0008', '') +('FDI_RXA_CTL', '0x000f000c', '') +('FDI_RXA_MISC', '0x000f0010', '') +('FDI_RXA_IIR', '0x000f0014', '') +('FDI_RXA_IMR', '0x000f0018', '') +('FDI_RXA_TUSIZE1', '0x000f0030', '') +('FDI_RXA_TUSIZE2', '0x000f0038', '') +('TRANSBCONF', '0x000f1008', '') +('FDI_RXB_CTL', '0x000f100c', '') +('FDI_RXB_MISC', '0x000f1010', '') +('FDI_RXB_IIR', '0x000f1014', '') +('FDI_RXB_IMR', '0x000f1018', '') +('FDI_RXB_TUSIZE1', '0x000f1030', '') +('FDI_RXB_TUSIZE2', '0x000f1038', '') +('TRANSCCONF', '0x000f2008', '') +('FDI_RXC_CTL', '0x000f200c', '') +('FDI_RXC_MISC', '0x000f2010', '') +('FDI_RXC_TUSIZE1', '0x000f2030', '') +('FDI_RXC_TUSIZE2', '0x000f2038', '') +('FDI_PLL_CTL_1', '0x000fe000', '') +('FDI_PLL_CTL_2', '0x000fe004', '')tools/quick_dump/base_interrupt.txt new file +20
-0@@ -0,0 +1,20 @@ +('GEN6_PMINTRMSK', '0x0000a168', '') +('DEISR', '0x00044000', '') +('DEIMR', '0x00044004', '') +('DEIIR', '0x00044008', '') +('DEIER', '0x0004400c', '') +('GTISR', '0x00044010', '') +('GTIMR', '0x00044014', '') +('GTIIR', '0x00044018', '') +('GTIER', '0x0004401c', '') +('GEN6_PMISR', '0x00044020', '') +('GEN6_PMIMR', '0x00044024', '') +('GEN6_PMIIR', '0x00044028', '') +('GEN6_PMIER', '0x0004402c', '') +('SDEISR', '0x000c4000', '') +('SDEIMR', '0x000c4004', '') +('SDEIIR', '0x000c4008', '') +('SDEIER', '0x000c400c', '') +('RENDER_IMR', '0x000020a8', '') +('BSD_IMR', '0x000120a8', '') +('BLT_IMR', '0x000220a8', '')tools/quick_dump/base_other.txt new file +6
-0@@ -0,0 +1,6 @@ +('PGETBL_CTL', '0x00002020', '') +('MI_MODE', '0x0000209c', '') +('ERROR_GEN6', '0x000040a0', '') +('RENDER_HWSTAM', '0x00002098', '') +('GEN6_BSD_HWSTAM', '0x00012098', '') +('GEN6_BLITTER_HWSTAM', '0x00022098', '')tools/quick_dump/base_power.txt new file +21
-0@@ -0,0 +1,21 @@ +('GEN6_RPNSWREQ', '0x0000a008', '') +('GEN6_RC_VIDEO_FREQ', '0x0000a00c', '') +('GEN6_RP_DOWN_TIMEOUT', '0x0000a010', '') +('GEN6_RP_INTERRUPT_LIMITS', '0x0000a014', '') +('GEN6_RP_CONTROL', '0x0000a024', '') +('GEN6_RP_UP_THRESHOLD', '0x0000a02c', '') +('GEN6_RP_UP_EI', '0x0000a068', '') +('GEN6_RP_DOWN_EI', '0x0000a06c', '') +('GEN6_RP_IDLE_HYSTERSIS', '0x0000a070', '') +('GEN6_RC_CONTROL', '0x0000a090', '') +('GEN6_RC_STATE', '0x0000a094', '') +('GEN6_RC1_WAKE_RATE_LIMIT', '0x0000a098', '') +('GEN6_RC6_WAKE_RATE_LIMIT', '0x0000a09c', '') +('GEN6_RC_EVALUATION_INTERVAL', '0x0000a0a8', '') +('GEN6_RC_IDLE_HYSTERSIS', '0x0000a0ac', '') +('GEN6_RC_SLEEP', '0x0000a0b0', '') +('GEN6_RC1e_THRESHOLD', '0x0000a0b4', '') +('GEN6_RC6_THRESHOLD', '0x0000a0b8', '') +('RC6_RESIDENCY_TIME', '0x00138108', '') +('RC6p_RESIDENCY_TIME', '0x0013810c', '') +('RC6pp_RESIDENCY_TIME', '0x00138110', '')tools/quick_dump/base_rings.txt new file +27
-0@@ -0,0 +1,27 @@ +('RENDER_INSTPM', '0x20c0', '') +('BSD_INSTPM', '0x120c0', '') +('BLT_INSTPM', '0x220c0', '') +('RENDER_RING_HEAD', '0x2034', '') +('BSD_RING_HEAD', '0x12034', '') +('BLT_RING_HEAD', '0x22034', '') +('RENDER_IPEIR', '0x2064', '') +('BSD_IPEIR', '0x12064', '') +('BLT_IPEIR', '0x22064', '') +('RENDER_IPEHR', '0x2068', '') +('BSD_IPEHR', '0x12068', '') +('BLT_IPEHR', '0x22068', '') +('RENDER_INSTDONE', '0x206c', '') +('BSD_INSTDONE', '0x1206c', '') +('BLT_INSTDONE', '0x2206c', '') +('RENDER_INSTPS', '0x2070', '') +('BSD_INSTPS', '0x12070', '') +('BLT_INSTPS', '0x22070', '') +('RENDER_RING_ACTHD', '0x2074', '') +('BSD_RING_ACTHD', '0x12074', '') +('BLT_RING_ACTHD', '0x22074', '') +('RENDER_FADDR', '0x2078', '') +('BSD_FADDR', '0x12078', '') +('BLT_FADDR', '0x22078', '') +('RENDER_RING_TAIL', '0x2030', '') +('BSD_RING_TAIL', '0x12030', '') +('BLT_RING_TAIL', '0x22030', '')tools/quick_dump/gen6_other.txt new file +1
-0@@ -0,0 +1 @@ +('GFX_MODE', '0x00002520', '')tools/quick_dump/gen7_other.txt new file +1
-0@@ -0,0 +1 @@ +('GFX_MODE_GEN7', '0x0000229c', '')tools/quick_dump/ivybridge new file +1
-0@@ -0,0 +1 @@ +gen7_other.txttools/quick_dump/quick_dump.py new file +34
-0@@ -0,0 +1,34 @@ +#!/usr/bin/env python3 + +import argparse +import os +import sys +import ast +import subprocess + +def parse_file(file): + for line in file: + register = ast.literal_eval(line) + value = subprocess.check_output(["../intel_reg_read", register[1]]) + value = value.decode('UTF-8') # convert the byte array to string + value = value.rstrip() #dump the newline + value = value.split(':') #output is 'addr : offset' + print(value[0], "(", register[0], ")", value[1]) + + +parser = argparse.ArgumentParser(description='Dumb register dumper.') +parser.add_argument('-b', '--baseless', action='store_true', default=True, help='baseless mode, ignore files starting with base_') +parser.add_argument('profile', nargs='?', type=argparse.FileType('r'), default=None) +args = parser.parse_args() + +#parse anything named base_ these are assumed to apply for all gens. +if args.baseless == False: + for root, dirs, files in os.walk('.'): + for name in files: + if name.startswith(("base_")): + file = open(name.rstrip(), 'r') + parse_file(file) + +for extra in args.profile: + extra_file = open(extra.rstrip(), 'r') + parse_file(extra_file)tools/quick_dump/sandybridge new file +1
-0@@ -0,0 +1 @@ +gen6_other.txttools/quick_dump/valleyview new file +6
-0@@ -0,0 +1,6 @@ +vlv_display.txt +base_interrupt.txt +base_other.txt +base_power.txt +base_rings.txt +ivybridgetools/quick_dump/vlv_display.txt new file +197
-0@@ -0,0 +1,197 @@ +('CPU_VGACNTRL', '0x001c1000', '') +('PORT_DBG', '0x001c2308', '') +('DIGITAL_PORT_HOTPLUG_CNTRL', '0x001c4030', '') +('FDI_PLL_BIOS_0', '0x001c6000', '') +('FDI_PLL_BIOS_1', '0x001c6004', '') +('FDI_PLL_BIOS_2', '0x001c6008', '') +('DISPLAY_PORT_PLL_BIOS_0', '0x001c600c', '') +('DISPLAY_PORT_PLL_BIOS_1', '0x001c6010', '') +('DISPLAY_PORT_PLL_BIOS_2', '0x001c6014', '') +('FDI_PLL_FREQ_CTL', '0x001c6030', '') +('BLC_PWM_CPU_CTL2', '0x001c8250', '') +('BLC_PWM_CPU_CTL', '0x001c8254', '') +('HTOTAL_A', '0x001e0000', '') +('HBLANK_A', '0x001e0004', '') +('HSYNC_A', '0x001e0008', '') +('VTOTAL_A', '0x001e000c', '') +('VBLANK_A', '0x001e0010', '') +('VSYNC_A', '0x001e0014', '') +('PIPEASRC', '0x001e001c', '') +('VSYNCSHIFT_A', '0x001e0028', '') +('PIPEA_DATA_M1', '0x001e0030', '') +('PIPEA_DATA_N1', '0x001e0034', '') +('PIPEA_DATA_M2', '0x001e0038', '') +('PIPEA_DATA_N2', '0x001e003c', '') +('PIPEA_LINK_M1', '0x001e0040', '') +('PIPEA_LINK_N1', '0x001e0044', '') +('PIPEA_LINK_M2', '0x001e0048', '') +('PIPEA_LINK_N2', '0x001e004c', '') +('FDI_TXA_CTL', '0x001e0100', '') +('HTOTAL_B', '0x001e1000', '') +('HBLANK_B', '0x001e1004', '') +('HSYNC_B', '0x001e1008', '') +('VTOTAL_B', '0x001e100c', '') +('VBLANK_B', '0x001e1010', '') +('VSYNC_B', '0x001e1014', '') +('PIPEBSRC', '0x001e101c', '') +('VSYNCSHIFT_B', '0x001e1028', '') +('PIPEB_DATA_M1', '0x001e1030', '') +('PIPEB_DATA_N1', '0x001e1034', '') +('PIPEB_DATA_M2', '0x001e1038', '') +('PIPEB_DATA_N2', '0x001e103c', '') +('PIPEB_LINK_M1', '0x001e1040', '') +('PIPEB_LINK_N1', '0x001e1044', '') +('PIPEB_LINK_M2', '0x001e1048', '') +('PIPEB_LINK_N2', '0x001e104c', '') +('FDI_TXB_CTL', '0x001e1100', '') +('HTOTAL_C', '0x001e2000', '') +('HBLANK_C', '0x001e2004', '') +('HSYNC_C', '0x001e2008', '') +('VTOTAL_C', '0x001e200c', '') +('VBLANK_C', '0x001e2010', '') +('VSYNC_C', '0x001e2014', '') +('PIPECSRC', '0x001e201c', '') +('VSYNCSHIFT_C', '0x001e2028', '') +('PIPEC_DATA_M1', '0x001e2030', '') +('PIPEC_DATA_N1', '0x001e2034', '') +('PIPEC_DATA_M2', '0x001e2038', '') +('PIPEC_DATA_N2', '0x001e203c', '') +('PIPEC_LINK_M1', '0x001e2040', '') +('PIPEC_LINK_N1', '0x001e2044', '') +('PIPEC_LINK_M2', '0x001e2048', '') +('PIPEC_LINK_N2', '0x001e204c', '') +('FDI_TXC_CTL', '0x001e2100', '') +('CPU_eDP_A', '0x001e4000', '') +('PFA_WIN_POS', '0x001e8070', '') +('PFA_WIN_SIZE', '0x001e8074', '') +('PFA_CTL_1', '0x001e8080', '') +('PFA_CTL_2', '0x001e8084', '') +('PFA_CTL_3', '0x001e8088', '') +('PFA_CTL_4', '0x001e8090', '') +('PFB_WIN_POS', '0x001e8870', '') +('PFB_WIN_SIZE', '0x001e8874', '') +('PFB_CTL_1', '0x001e8880', '') +('PFB_CTL_2', '0x001e8884', '') +('PFB_CTL_3', '0x001e8888', '') +('PFB_CTL_4', '0x001e8890', '') +('PFC_WIN_POS', '0x001e9070', '') +('PFC_WIN_SIZE', '0x001e9074', '') +('PFC_CTL_1', '0x001e9080', '') +('PFC_CTL_2', '0x001e9084', '') +('PFC_CTL_3', '0x001e9088', '') +('PFC_CTL_4', '0x001e9090', '') +('PIPEACONF', '0x001f0008', '') +('DSPACNTR', '0x001f0180', '') +('DSPABASE', '0x001f0184', '') +('DSPASTRIDE', '0x001f0188', '') +('DSPASURF', '0x001f019c', '') +('DSPATILEOFF', '0x001f01a4', '') +('PIPEBCONF', '0x001f1008', '') +('DSPBCNTR', '0x001f1180', '') +('DSPBBASE', '0x001f1184', '') +('DSPBSTRIDE', '0x001f1188', '') +('DSPBSURF', '0x001f119c', '') +('DSPBTILEOFF', '0x001f11a4', '') +('PIPECCONF', '0x001f2008', '') +('DSPCCNTR', '0x001f2180', '') +('DSPCBASE', '0x001f2184', '') +('DSPCSTRIDE', '0x001f2188', '') +('DSPCSURF', '0x001f219c', '') +('DSPCTILEOFF', '0x001f21a4', '') +('PCH_DPLL_A', '0x00246014', '') +('PCH_DPLL_B', '0x00246018', '') +('PCH_FPA0', '0x00246040', '') +('PCH_FPA1', '0x00246044', '') +('PCH_FPB0', '0x00246048', '') +('PCH_FPB1', '0x0024604c', '') +('PCH_DREF_CONTROL', '0x00246200', '') +('PCH_RAWCLK_FREQ', '0x00246204', '') +('PCH_DPLL_TMR_CFG', '0x00246208', '') +('PCH_SSC4_PARMS', '0x00246210', '') +('PCH_SSC4_AUX_PARMS', '0x00246214', '') +('PCH_DPLL_ANALOG_CTL', '0x00246300', '') +('PCH_DPLL_SEL', '0x00247000', '') +('PCH_PP_STATUS', '0x00247200', '') +('PCH_PP_CONTROL', '0x00247204', '') +('PCH_PP_ON_DELAYS', '0x00247208', '') +('PCH_PP_OFF_DELAYS', '0x0024720c', '') +('PCH_PP_DIVISOR', '0x00247210', '') +('BLC_PWM_PCH_CTL1', '0x00248250', '') +('BLC_PWM_PCH_CTL2', '0x00248254', '') +('TRANS_HTOTAL_A', '0x00260000', '') +('TRANS_HBLANK_A', '0x00260004', '') +('TRANS_HSYNC_A', '0x00260008', '') +('TRANS_VTOTAL_A', '0x0026000c', '') +('TRANS_VBLANK_A', '0x00260010', '') +('TRANS_VSYNC_A', '0x00260014', '') +('TRANS_VSYNCSHIFT_A', '0x00260028', '') +('TRANSA_DATA_M1', '0x00260030', '') +('TRANSA_DATA_N1', '0x00260034', '') +('TRANSA_DATA_M2', '0x00260038', '') +('TRANSA_DATA_N2', '0x0026003c', '') +('TRANSA_DP_LINK_M1', '0x00260040', '') +('TRANSA_DP_LINK_N1', '0x00260044', '') +('TRANSA_DP_LINK_M2', '0x00260048', '') +('TRANSA_DP_LINK_N2', '0x0026004c', '') +('TRANS_DP_CTL_A', '0x00260300', '') +('TRANS_HTOTAL_B', '0x00261000', '') +('TRANS_HBLANK_B', '0x00261004', '') +('TRANS_HSYNC_B', '0x00261008', '') +('TRANS_VTOTAL_B', '0x0026100c', '') +('TRANS_VBLANK_B', '0x00261010', '') +('TRANS_VSYNC_B', '0x00261014', '') +('TRANS_VSYNCSHIFT_B', '0x00261028', '') +('TRANSB_DATA_M1', '0x00261030', '') +('TRANSB_DATA_N1', '0x00261034', '') +('TRANSB_DATA_M2', '0x00261038', '') +('TRANSB_DATA_N2', '0x0026103c', '') +('TRANSB_DP_LINK_M1', '0x00261040', '') +('TRANSB_DP_LINK_N1', '0x00261044', '') +('TRANSB_DP_LINK_M2', '0x00261048', '') +('TRANSB_DP_LINK_N2', '0x0026104c', '') +('PCH_ADPA', '0x00261100', '') +('HDMIB', '0x00261140', '') +('HDMIC', '0x00261150', '') +('HDMID', '0x00261160', '') +('PCH_LVDS', '0x00261180', '') +('TRANS_DP_CTL_B', '0x00261300', '') +('TRANS_HTOTAL_C', '0x00262000', '') +('TRANS_HBLANK_C', '0x00262004', '') +('TRANS_HSYNC_C', '0x00262008', '') +('TRANS_VTOTAL_C', '0x0026200c', '') +('TRANS_VBLANK_C', '0x00262010', '') +('TRANS_VSYNC_C', '0x00262014', '') +('TRANS_VSYNCSHIFT_C', '0x00262028', '') +('TRANSC_DATA_M1', '0x00262030', '') +('TRANSC_DATA_N1', '0x00262034', '') +('TRANSC_DATA_M2', '0x00262038', '') +('TRANSC_DATA_N2', '0x0026203c', '') +('TRANSC_DP_LINK_M1', '0x00262040', '') +('TRANSC_DP_LINK_N1', '0x00262044', '') +('TRANSC_DP_LINK_M2', '0x00262048', '') +('TRANSC_DP_LINK_N2', '0x0026204c', '') +('TRANS_DP_CTL_C', '0x00262300', '') +('PCH_DP_B', '0x00264100', '') +('PCH_DP_C', '0x00264200', '') +('PCH_DP_D', '0x00264300', '') +('TRANSACONF', '0x00270008', '') +('FDI_RXA_CTL', '0x0027000c', '') +('FDI_RXA_MISC', '0x00270010', '') +('FDI_RXA_IIR', '0x00270014', '') +('FDI_RXA_IMR', '0x00270018', '') +('FDI_RXA_TUSIZE1', '0x00270030', '') +('FDI_RXA_TUSIZE2', '0x00270038', '') +('TRANSBCONF', '0x00271008', '') +('FDI_RXB_CTL', '0x0027100c', '') +('FDI_RXB_MISC', '0x00271010', '') +('FDI_RXB_IIR', '0x00271014', '') +('FDI_RXB_IMR', '0x00271018', '') +('FDI_RXB_TUSIZE1', '0x00271030', '') +('FDI_RXB_TUSIZE2', '0x00271038', '') +('TRANSCCONF', '0x00272008', '') +('FDI_RXC_CTL', '0x0027200c', '') +('FDI_RXC_MISC', '0x00272010', '') +('FDI_RXC_TUSIZE1', '0x00272030', '') +('FDI_RXC_TUSIZE2', '0x00272038', '') +('FDI_PLL_CTL_1', '0x0027e000', '') +('FDI_PLL_CTL_2', '0x0027e004', '')Signature · 6 lines
1.7.12 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 37 lines · Daniel Vetter
Quoted 26 lines · Ben Widawsky
intel_reg_dumperis cool. However, doing bit decoding and dealing with moving registers from generation to generation (and in some cases just steppings) becomes a bit of a burden over time. It's also not completely necessary when doing the not-so-uncommon diff against some other BIOS debug.While I do not want this tool to replace
intel_reg_dumper, I think it has it's uses. The target is particularly for power-on like situations where we want to easily add profiles with new registers, and not lose the old information. Doing this in the existing reg dumper can be a bit tedious and sometimes error prone. It also is a nice place to add registers which may or may not actually be useful. Ones which prove useful over time should get moved to reg dumper.The tool provides a fast way to add new registers, and register profiles as we bring up new platforms, or try to share debug information. This is accomplished by defining python tuples in text files, and adding them to profiles, which are just a list of the files containing tuples.
I defined a few "base" files which is essentially the previous
reg_dumperregisters + some other interesting ones. These are automatically used unless the user supplies the "baseless" option. The base should be pretty decent for all recent generation chips with the exception of valleyview. On top of this, I provided some starter
profiles: ivybridge, sandybridge, and valleyview.Quoted 6 lines
NOTE: the valleyview profile is currently a work in progress.
So to get a quick sandybridge dump for instance:
sudo ./quick_dump.py sandybridgeFeedback please.
I've wasted a few brain-cycles on the dump problem recently, too - pimping
intel_reg_dumperis rather obviously a pain. Two ideas:
Quoted 14 lines
- create a script that slurps in internal Bspec xml. The issue here is
that I don't know how to handle regs with read-sideeffects (yep, we
have
those). Maybe manual blacklist. The upside is that this would
hopefully
allow auto-decoding of the bitfields (if we pimp the xml slurper sufficiently). Also, if we can get at the xml for the open-source
Bspec,
we could use this tool to auto-create a per-gen open-source reg
slurper.
Generally I fear that this approach is too messy and noisy and
hence
intel_reg_dumperpimping probably better.
This is like, "in an ideal world..." I've sort of given up on anything resembling this by now.
Quoted 7 lines
- Another idea is to just dump entire register blocks for functional units with a header per block (e.g. "
PLANE_A") and then offset :
value
hexvalue paris per line. That might be useful for quick&dirty
comparison
for bringup.
I'm really not sure how well this scales, and I believe it's a lot of work to implement. Also, your side effects comment.
I was trying to avoid providing WAY too much information. I still want a dump that can be useful with 5 minutes of scanning. intel_reg_read already supports a huge dump like this, and we should probably work on fixing that. It has its uses.
Quoted 5 lines
And a quick comment on your approach here: I'm not too sure whether the file-base register block approach scales, respectively why exactly this is better than frobbing the
reg_dumpertool. Since that one has the concept of register blocks already, too.
It doesn't scale. It scales better than reg_dumper was my goal and point (IMO).
The exact problem that was trying to be solved is Valleyview (and I assure you there will be more such products coming). Valleyview took a huge chunk of well known registers, and changed their offsets. Modifying this in reg dumper is of course possible, but it's tedious. I wanted to have easy to modify text files with an easy python front end (the offsets could even be applied in the script extremely easily).
The other quick nice to have is not needing supported pci ids (of course that's easily solvable in intel_reg_dumper too).
Quoted 631 lines
Cheers, Daniel
Quoted 628 lines
CC Jesse Barnes <[email protected]>Signed-off-by Ben Widawsky <[email protected]>--- tools/quick_dump/base_display.txt | 197 ++++++++++++++++++++++++++++++++++++ tools/quick_dump/base_interrupt.txt | 20 ++++ tools/quick_dump/base_other.txt | 6 ++ tools/quick_dump/base_power.txt | 21 ++++ tools/quick_dump/base_rings.txt | 27 +++++ tools/quick_dump/gen6_other.txt | 1 + tools/quick_dump/gen7_other.txt | 1 + tools/quick_dump/ivybridge | 1 + tools/quick_dump/quick_dump.py | 34 +++++++ tools/quick_dump/sandybridge | 1 + tools/quick_dump/valleyview | 6 ++ tools/quick_dump/vlv_display.txt | 197 ++++++++++++++++++++++++++++++++++++ 12 files changed, 512 insertions(+) create mode 100644 tools/quick_dump/base_display.txt create mode 100644 tools/quick_dump/base_interrupt.txt create mode 100644 tools/quick_dump/base_other.txt create mode 100644 tools/quick_dump/base_power.txt create mode 100644 tools/quick_dump/base_rings.txt create mode 100644 tools/quick_dump/gen6_other.txt create mode 100644 tools/quick_dump/gen7_other.txt create mode 100644 tools/quick_dump/ivybridge create mode 100755 tools/quick_dump/quick_dump.py create mode 100644 tools/quick_dump/sandybridge create mode 100644 tools/quick_dump/valleyview create mode 100644 tools/quick_dump/vlv_display.txttools/quick_dump/base_display.txt new file +197
-0@@ -0,0 +1,197 @@ +('CPU_VGACNTRL', '0x00041000', '') +('PORT_DBG', '0x00042308', '') +('DIGITAL_PORT_HOTPLUG_CNTRL', '0x00044030', '') +('FDI_PLL_BIOS_0', '0x00046000', '') +('FDI_PLL_BIOS_1', '0x00046004', '') +('FDI_PLL_BIOS_2', '0x00046008', '') +('DISPLAY_PORT_PLL_BIOS_0', '0x0004600c', '') +('DISPLAY_PORT_PLL_BIOS_1', '0x00046010', '') +('DISPLAY_PORT_PLL_BIOS_2', '0x00046014', '') +('FDI_PLL_FREQ_CTL', '0x00046030', '') +('BLC_PWM_CPU_CTL2', '0x00048250', '') +('BLC_PWM_CPU_CTL', '0x00048254', '') +('HTOTAL_A', '0x00060000', '') +('HBLANK_A', '0x00060004', '') +('HSYNC_A', '0x00060008', '') +('VTOTAL_A', '0x0006000c', '') +('VBLANK_A', '0x00060010', '') +('VSYNC_A', '0x00060014', '') +('PIPEASRC', '0x0006001c', '') +('VSYNCSHIFT_A', '0x00060028', '') +('PIPEA_DATA_M1', '0x00060030', '') +('PIPEA_DATA_N1', '0x00060034', '') +('PIPEA_DATA_M2', '0x00060038', '') +('PIPEA_DATA_N2', '0x0006003c', '') +('PIPEA_LINK_M1', '0x00060040', '') +('PIPEA_LINK_N1', '0x00060044', '') +('PIPEA_LINK_M2', '0x00060048', '') +('PIPEA_LINK_N2', '0x0006004c', '') +('FDI_TXA_CTL', '0x00060100', '') +('HTOTAL_B', '0x00061000', '') +('HBLANK_B', '0x00061004', '') +('HSYNC_B', '0x00061008', '') +('VTOTAL_B', '0x0006100c', '') +('VBLANK_B', '0x00061010', '') +('VSYNC_B', '0x00061014', '') +('PIPEBSRC', '0x0006101c', '') +('VSYNCSHIFT_B', '0x00061028', '') +('PIPEB_DATA_M1', '0x00061030', '') +('PIPEB_DATA_N1', '0x00061034', '') +('PIPEB_DATA_M2', '0x00061038', '') +('PIPEB_DATA_N2', '0x0006103c', '') +('PIPEB_LINK_M1', '0x00061040', '') +('PIPEB_LINK_N1', '0x00061044', '') +('PIPEB_LINK_M2', '0x00061048', '') +('PIPEB_LINK_N2', '0x0006104c', '') +('FDI_TXB_CTL', '0x00061100', '') +('HTOTAL_C', '0x00062000', '') +('HBLANK_C', '0x00062004', '') +('HSYNC_C', '0x00062008', '') +('VTOTAL_C', '0x0006200c', '') +('VBLANK_C', '0x00062010', '') +('VSYNC_C', '0x00062014', '') +('PIPECSRC', '0x0006201c', '') +('VSYNCSHIFT_C', '0x00062028', '') +('PIPEC_DATA_M1', '0x00062030', '') +('PIPEC_DATA_N1', '0x00062034', '') +('PIPEC_DATA_M2', '0x00062038', '') +('PIPEC_DATA_N2', '0x0006203c', '') +('PIPEC_LINK_M1', '0x00062040', '') +('PIPEC_LINK_N1', '0x00062044', '') +('PIPEC_LINK_M2', '0x00062048', '') +('PIPEC_LINK_N2', '0x0006204c', '') +('FDI_TXC_CTL', '0x00062100', '') +('CPU_eDP_A', '0x00064000', '') +('PFA_WIN_POS', '0x00068070', '') +('PFA_WIN_SIZE', '0x00068074', '') +('PFA_CTL_1', '0x00068080', '') +('PFA_CTL_2', '0x00068084', '') +('PFA_CTL_3', '0x00068088', '') +('PFA_CTL_4', '0x00068090', '') +('PFB_WIN_POS', '0x00068870', '') +('PFB_WIN_SIZE', '0x00068874', '') +('PFB_CTL_1', '0x00068880', '') +('PFB_CTL_2', '0x00068884', '') +('PFB_CTL_3', '0x00068888', '') +('PFB_CTL_4', '0x00068890', '') +('PFC_WIN_POS', '0x00069070', '') +('PFC_WIN_SIZE', '0x00069074', '') +('PFC_CTL_1', '0x00069080', '') +('PFC_CTL_2', '0x00069084', '') +('PFC_CTL_3', '0x00069088', '') +('PFC_CTL_4', '0x00069090', '') +('PIPEACONF', '0x00070008', '') +('DSPACNTR', '0x00070180', '') +('DSPABASE', '0x00070184', '') +('DSPASTRIDE', '0x00070188', '') +('DSPASURF', '0x0007019c', '') +('DSPATILEOFF', '0x000701a4', '') +('PIPEBCONF', '0x00071008', '') +('DSPBCNTR', '0x00071180', '') +('DSPBBASE', '0x00071184', '') +('DSPBSTRIDE', '0x00071188', '') +('DSPBSURF', '0x0007119c', '') +('DSPBTILEOFF', '0x000711a4', '') +('PIPECCONF', '0x00072008', '') +('DSPCCNTR', '0x00072180', '') +('DSPCBASE', '0x00072184', '') +('DSPCSTRIDE', '0x00072188', '') +('DSPCSURF', '0x0007219c', '') +('DSPCTILEOFF', '0x000721a4', '') +('PCH_DPLL_A', '0x000c6014', '') +('PCH_DPLL_B', '0x000c6018', '') +('PCH_FPA0', '0x000c6040', '') +('PCH_FPA1', '0x000c6044', '') +('PCH_FPB0', '0x000c6048', '') +('PCH_FPB1', '0x000c604c', '') +('PCH_DREF_CONTROL', '0x000c6200', '') +('PCH_RAWCLK_FREQ', '0x000c6204', '') +('PCH_DPLL_TMR_CFG', '0x000c6208', '') +('PCH_SSC4_PARMS', '0x000c6210', '') +('PCH_SSC4_AUX_PARMS', '0x000c6214', '') +('PCH_DPLL_ANALOG_CTL', '0x000c6300', '') +('PCH_DPLL_SEL', '0x000c7000', '') +('PCH_PP_STATUS', '0x000c7200', '') +('PCH_PP_CONTROL', '0x000c7204', '') +('PCH_PP_ON_DELAYS', '0x000c7208', '') +('PCH_PP_OFF_DELAYS', '0x000c720c', '') +('PCH_PP_DIVISOR', '0x000c7210', '') +('BLC_PWM_PCH_CTL1', '0x000c8250', '') +('BLC_PWM_PCH_CTL2', '0x000c8254', '') +('TRANS_HTOTAL_A', '0x000e0000', '') +('TRANS_HBLANK_A', '0x000e0004', '') +('TRANS_HSYNC_A', '0x000e0008', '') +('TRANS_VTOTAL_A', '0x000e000c', '') +('TRANS_VBLANK_A', '0x000e0010', '') +('TRANS_VSYNC_A', '0x000e0014', '') +('TRANS_VSYNCSHIFT_A', '0x000e0028', '') +('TRANSA_DATA_M1', '0x000e0030', '') +('TRANSA_DATA_N1', '0x000e0034', '') +('TRANSA_DATA_M2', '0x000e0038', '') +('TRANSA_DATA_N2', '0x000e003c', '') +('TRANSA_DP_LINK_M1', '0x000e0040', '') +('TRANSA_DP_LINK_N1', '0x000e0044', '') +('TRANSA_DP_LINK_M2', '0x000e0048', '') +('TRANSA_DP_LINK_N2', '0x000e004c', '') +('TRANS_DP_CTL_A', '0x000e0300', '') +('TRANS_HTOTAL_B', '0x000e1000', '') +('TRANS_HBLANK_B', '0x000e1004', '') +('TRANS_HSYNC_B', '0x000e1008', '') +('TRANS_VTOTAL_B', '0x000e100c', '') +('TRANS_VBLANK_B', '0x000e1010', '') +('TRANS_VSYNC_B', '0x000e1014', '') +('TRANS_VSYNCSHIFT_B', '0x000e1028', '') +('TRANSB_DATA_M1', '0x000e1030', '') +('TRANSB_DATA_N1', '0x000e1034', '') +('TRANSB_DATA_M2', '0x000e1038', '') +('TRANSB_DATA_N2', '0x000e103c', '') +('TRANSB_DP_LINK_M1', '0x000e1040', '') +('TRANSB_DP_LINK_N1', '0x000e1044', '') +('TRANSB_DP_LINK_M2', '0x000e1048', '') +('TRANSB_DP_LINK_N2', '0x000e104c', '') +('PCH_ADPA', '0x000e1100', '') +('HDMIB', '0x000e1140', '') +('HDMIC', '0x000e1150', '') +('HDMID', '0x000e1160', '') +('PCH_LVDS', '0x000e1180', '') +('TRANS_DP_CTL_B', '0x000e1300', '') +('TRANS_HTOTAL_C', '0x000e2000', '') +('TRANS_HBLANK_C', '0x000e2004', '') +('TRANS_HSYNC_C', '0x000e2008', '') +('TRANS_VTOTAL_C', '0x000e200c', '') +('TRANS_VBLANK_C', '0x000e2010', '') +('TRANS_VSYNC_C', '0x000e2014', '') +('TRANS_VSYNCSHIFT_C', '0x000e2028', '') +('TRANSC_DATA_M1', '0x000e2030', '') +('TRANSC_DATA_N1', '0x000e2034', '') +('TRANSC_DATA_M2', '0x000e2038', '') +('TRANSC_DATA_N2', '0x000e203c', '') +('TRANSC_DP_LINK_M1', '0x000e2040', '') +('TRANSC_DP_LINK_N1', '0x000e2044', '') +('TRANSC_DP_LINK_M2', '0x000e2048', '') +('TRANSC_DP_LINK_N2', '0x000e204c', '') +('TRANS_DP_CTL_C', '0x000e2300', '') +('PCH_DP_B', '0x000e4100', '') +('PCH_DP_C', '0x000e4200', '') +('PCH_DP_D', '0x000e4300', '') +('TRANSACONF', '0x000f0008', '') +('FDI_RXA_CTL', '0x000f000c', '') +('FDI_RXA_MISC', '0x000f0010', '') +('FDI_RXA_IIR', '0x000f0014', '') +('FDI_RXA_IMR', '0x000f0018', '') +('FDI_RXA_TUSIZE1', '0x000f0030', '') +('FDI_RXA_TUSIZE2', '0x000f0038', '') +('TRANSBCONF', '0x000f1008', '') +('FDI_RXB_CTL', '0x000f100c', '') +('FDI_RXB_MISC', '0x000f1010', '') +('FDI_RXB_IIR', '0x000f1014', '') +('FDI_RXB_IMR', '0x000f1018', '') +('FDI_RXB_TUSIZE1', '0x000f1030', '') +('FDI_RXB_TUSIZE2', '0x000f1038', '') +('TRANSCCONF', '0x000f2008', '') +('FDI_RXC_CTL', '0x000f200c', '') +('FDI_RXC_MISC', '0x000f2010', '') +('FDI_RXC_TUSIZE1', '0x000f2030', '') +('FDI_RXC_TUSIZE2', '0x000f2038', '') +('FDI_PLL_CTL_1', '0x000fe000', '') +('FDI_PLL_CTL_2', '0x000fe004', '')tools/quick_dump/base_interrupt.txt new file +20
-0@@ -0,0 +1,20 @@ +('GEN6_PMINTRMSK', '0x0000a168', '') +('DEISR', '0x00044000', '') +('DEIMR', '0x00044004', '') +('DEIIR', '0x00044008', '') +('DEIER', '0x0004400c', '') +('GTISR', '0x00044010', '') +('GTIMR', '0x00044014', '') +('GTIIR', '0x00044018', '') +('GTIER', '0x0004401c', '') +('GEN6_PMISR', '0x00044020', '') +('GEN6_PMIMR', '0x00044024', '') +('GEN6_PMIIR', '0x00044028', '') +('GEN6_PMIER', '0x0004402c', '') +('SDEISR', '0x000c4000', '') +('SDEIMR', '0x000c4004', '') +('SDEIIR', '0x000c4008', '') +('SDEIER', '0x000c400c', '') +('RENDER_IMR', '0x000020a8', '') +('BSD_IMR', '0x000120a8', '') +('BLT_IMR', '0x000220a8', '')tools/quick_dump/base_other.txt new file +6
-0@@ -0,0 +1,6 @@ +('PGETBL_CTL', '0x00002020', '') +('MI_MODE', '0x0000209c', '') +('ERROR_GEN6', '0x000040a0', '') +('RENDER_HWSTAM', '0x00002098', '') +('GEN6_BSD_HWSTAM', '0x00012098', '') +('GEN6_BLITTER_HWSTAM', '0x00022098', '')tools/quick_dump/base_power.txt new file +21
-0@@ -0,0 +1,21 @@ +('GEN6_RPNSWREQ', '0x0000a008', '') +('GEN6_RC_VIDEO_FREQ', '0x0000a00c', '') +('GEN6_RP_DOWN_TIMEOUT', '0x0000a010', '') +('GEN6_RP_INTERRUPT_LIMITS', '0x0000a014', '') +('GEN6_RP_CONTROL', '0x0000a024', '') +('GEN6_RP_UP_THRESHOLD', '0x0000a02c', '') +('GEN6_RP_UP_EI', '0x0000a068', '') +('GEN6_RP_DOWN_EI', '0x0000a06c', '') +('GEN6_RP_IDLE_HYSTERSIS', '0x0000a070', '') +('GEN6_RC_CONTROL', '0x0000a090', '') +('GEN6_RC_STATE', '0x0000a094', '') +('GEN6_RC1_WAKE_RATE_LIMIT', '0x0000a098', '') +('GEN6_RC6_WAKE_RATE_LIMIT', '0x0000a09c', '') +('GEN6_RC_EVALUATION_INTERVAL', '0x0000a0a8', '') +('GEN6_RC_IDLE_HYSTERSIS', '0x0000a0ac', '') +('GEN6_RC_SLEEP', '0x0000a0b0', '') +('GEN6_RC1e_THRESHOLD', '0x0000a0b4', '') +('GEN6_RC6_THRESHOLD', '0x0000a0b8', '') +('RC6_RESIDENCY_TIME', '0x00138108', '') +('RC6p_RESIDENCY_TIME', '0x0013810c', '') +('RC6pp_RESIDENCY_TIME', '0x00138110', '')tools/quick_dump/base_rings.txt new file +27
-0@@ -0,0 +1,27 @@ +('RENDER_INSTPM', '0x20c0', '') +('BSD_INSTPM', '0x120c0', '') +('BLT_INSTPM', '0x220c0', '') +('RENDER_RING_HEAD', '0x2034', '') +('BSD_RING_HEAD', '0x12034', '') +('BLT_RING_HEAD', '0x22034', '') +('RENDER_IPEIR', '0x2064', '') +('BSD_IPEIR', '0x12064', '') +('BLT_IPEIR', '0x22064', '') +('RENDER_IPEHR', '0x2068', '') +('BSD_IPEHR', '0x12068', '') +('BLT_IPEHR', '0x22068', '') +('RENDER_INSTDONE', '0x206c', '') +('BSD_INSTDONE', '0x1206c', '') +('BLT_INSTDONE', '0x2206c', '') +('RENDER_INSTPS', '0x2070', '') +('BSD_INSTPS', '0x12070', '') +('BLT_INSTPS', '0x22070', '') +('RENDER_RING_ACTHD', '0x2074', '') +('BSD_RING_ACTHD', '0x12074', '') +('BLT_RING_ACTHD', '0x22074', '') +('RENDER_FADDR', '0x2078', '') +('BSD_FADDR', '0x12078', '') +('BLT_FADDR', '0x22078', '') +('RENDER_RING_TAIL', '0x2030', '') +('BSD_RING_TAIL', '0x12030', '') +('BLT_RING_TAIL', '0x22030', '')tools/quick_dump/gen6_other.txt new file +1
-0@@ -0,0 +1 @@ +('GFX_MODE', '0x00002520', '')tools/quick_dump/gen7_other.txt new file +1
-0@@ -0,0 +1 @@ +('GFX_MODE_GEN7', '0x0000229c', '')tools/quick_dump/ivybridge new file +1
-0@@ -0,0 +1 @@ +gen7_other.txttools/quick_dump/quick_dump.py new file +12
-0@@ -0,0 +1,34 @@ +#!/usr/bin/env python3 + +import argparse +import os +import sys +import ast +import subprocess + +def parse_file(file): + for line in file: + register = ast.literal_eval(line) + value = subprocess.check_output(["../intel_reg_read",register[1]])
tools/quick_dump/quick_dump.py new file +7
-0+ value = value.decode('UTF-8') # convert the byte array to string + value = value.rstrip() #dump the newline + value = value.split(':') #output is 'addr : offset' + print(value[0], "(", register[0], ")", value[1]) + + +parser = argparse.ArgumentParser(description='Dumb registerdumper.')
+parser.add_argument('-b', '--baseless', action='store_true', default=True, help='baseless mode, ignore files starting withbase_') +parser.add_argument('profile', nargs='?', type=argparse.FileType('r'), default=None)tools/quick_dump/quick_dump.py new file +3
-0+args = parser.parse_args() + +#parse anything named base_ these are assumed to apply for allgens.
tools/quick_dump/quick_dump.py new file +10
-0+if args.baseless == False: + for root, dirs, files in os.walk('.'): + for name in files: + if name.startswith(("base_")): + file = open(name.rstrip(), 'r') + parse_file(file) + +for extra in args.profile: + extra_file = open(extra.rstrip(), 'r') + parse_file(extra_file)tools/quick_dump/sandybridge new file +1
-0@@ -0,0 +1 @@ +gen6_other.txttools/quick_dump/valleyview new file +6
-0@@ -0,0 +1,6 @@ +vlv_display.txt +base_interrupt.txt +base_other.txt +base_power.txt +base_rings.txt +ivybridgetools/quick_dump/vlv_display.txt new file +197
-1@@ -0,0 +1,197 @@ +('CPU_VGACNTRL', '0x001c1000', '') +('PORT_DBG', '0x001c2308', '') +('DIGITAL_PORT_HOTPLUG_CNTRL', '0x001c4030', '') +('FDI_PLL_BIOS_0', '0x001c6000', '') +('FDI_PLL_BIOS_1', '0x001c6004', '') +('FDI_PLL_BIOS_2', '0x001c6008', '') +('DISPLAY_PORT_PLL_BIOS_0', '0x001c600c', '') +('DISPLAY_PORT_PLL_BIOS_1', '0x001c6010', '') +('DISPLAY_PORT_PLL_BIOS_2', '0x001c6014', '') +('FDI_PLL_FREQ_CTL', '0x001c6030', '') +('BLC_PWM_CPU_CTL2', '0x001c8250', '') +('BLC_PWM_CPU_CTL', '0x001c8254', '') +('HTOTAL_A', '0x001e0000', '') +('HBLANK_A', '0x001e0004', '') +('HSYNC_A', '0x001e0008', '') +('VTOTAL_A', '0x001e000c', '') +('VBLANK_A', '0x001e0010', '') +('VSYNC_A', '0x001e0014', '') +('PIPEASRC', '0x001e001c', '') +('VSYNCSHIFT_A', '0x001e0028', '') +('PIPEA_DATA_M1', '0x001e0030', '') +('PIPEA_DATA_N1', '0x001e0034', '') +('PIPEA_DATA_M2', '0x001e0038', '') +('PIPEA_DATA_N2', '0x001e003c', '') +('PIPEA_LINK_M1', '0x001e0040', '') +('PIPEA_LINK_N1', '0x001e0044', '') +('PIPEA_LINK_M2', '0x001e0048', '') +('PIPEA_LINK_N2', '0x001e004c', '') +('FDI_TXA_CTL', '0x001e0100', '') +('HTOTAL_B', '0x001e1000', '') +('HBLANK_B', '0x001e1004', '') +('HSYNC_B', '0x001e1008', '') +('VTOTAL_B', '0x001e100c', '') +('VBLANK_B', '0x001e1010', '') +('VSYNC_B', '0x001e1014', '') +('PIPEBSRC', '0x001e101c', '') +('VSYNCSHIFT_B', '0x001e1028', '') +('PIPEB_DATA_M1', '0x001e1030', '') +('PIPEB_DATA_N1', '0x001e1034', '') +('PIPEB_DATA_M2', '0x001e1038', '') +('PIPEB_DATA_N2', '0x001e103c', '') +('PIPEB_LINK_M1', '0x001e1040', '') +('PIPEB_LINK_N1', '0x001e1044', '') +('PIPEB_LINK_M2', '0x001e1048', '') +('PIPEB_LINK_N2', '0x001e104c', '') +('FDI_TXB_CTL', '0x001e1100', '') +('HTOTAL_C', '0x001e2000', '') +('HBLANK_C', '0x001e2004', '') +('HSYNC_C', '0x001e2008', '') +('VTOTAL_C', '0x001e200c', '') +('VBLANK_C', '0x001e2010', '') +('VSYNC_C', '0x001e2014', '') +('PIPECSRC', '0x001e201c', '') +('VSYNCSHIFT_C', '0x001e2028', '') +('PIPEC_DATA_M1', '0x001e2030', '') +('PIPEC_DATA_N1', '0x001e2034', '') +('PIPEC_DATA_M2', '0x001e2038', '') +('PIPEC_DATA_N2', '0x001e203c', '') +('PIPEC_LINK_M1', '0x001e2040', '') +('PIPEC_LINK_N1', '0x001e2044', '') +('PIPEC_LINK_M2', '0x001e2048', '') +('PIPEC_LINK_N2', '0x001e204c', '') +('FDI_TXC_CTL', '0x001e2100', '') +('CPU_eDP_A', '0x001e4000', '') +('PFA_WIN_POS', '0x001e8070', '') +('PFA_WIN_SIZE', '0x001e8074', '') +('PFA_CTL_1', '0x001e8080', '') +('PFA_CTL_2', '0x001e8084', '') +('PFA_CTL_3', '0x001e8088', '') +('PFA_CTL_4', '0x001e8090', '') +('PFB_WIN_POS', '0x001e8870', '') +('PFB_WIN_SIZE', '0x001e8874', '') +('PFB_CTL_1', '0x001e8880', '') +('PFB_CTL_2', '0x001e8884', '') +('PFB_CTL_3', '0x001e8888', '') +('PFB_CTL_4', '0x001e8890', '') +('PFC_WIN_POS', '0x001e9070', '') +('PFC_WIN_SIZE', '0x001e9074', '') +('PFC_CTL_1', '0x001e9080', '') +('PFC_CTL_2', '0x001e9084', '') +('PFC_CTL_3', '0x001e9088', '') +('PFC_CTL_4', '0x001e9090', '') +('PIPEACONF', '0x001f0008', '') +('DSPACNTR', '0x001f0180', '') +('DSPABASE', '0x001f0184', '') +('DSPASTRIDE', '0x001f0188', '') +('DSPASURF', '0x001f019c', '') +('DSPATILEOFF', '0x001f01a4', '') +('PIPEBCONF', '0x001f1008', '') +('DSPBCNTR', '0x001f1180', '') +('DSPBBASE', '0x001f1184', '') +('DSPBSTRIDE', '0x001f1188', '') +('DSPBSURF', '0x001f119c', '') +('DSPBTILEOFF', '0x001f11a4', '') +('PIPECCONF', '0x001f2008', '') +('DSPCCNTR', '0x001f2180', '') +('DSPCBASE', '0x001f2184', '') +('DSPCSTRIDE', '0x001f2188', '') +('DSPCSURF', '0x001f219c', '') +('DSPCTILEOFF', '0x001f21a4', '') +('PCH_DPLL_A', '0x00246014', '') +('PCH_DPLL_B', '0x00246018', '') +('PCH_FPA0', '0x00246040', '') +('PCH_FPA1', '0x00246044', '') +('PCH_FPB0', '0x00246048', '') +('PCH_FPB1', '0x0024604c', '') +('PCH_DREF_CONTROL', '0x00246200', '') +('PCH_RAWCLK_FREQ', '0x00246204', '') +('PCH_DPLL_TMR_CFG', '0x00246208', '') +('PCH_SSC4_PARMS', '0x00246210', '') +('PCH_SSC4_AUX_PARMS', '0x00246214', '') +('PCH_DPLL_ANALOG_CTL', '0x00246300', '') +('PCH_DPLL_SEL', '0x00247000', '') +('PCH_PP_STATUS', '0x00247200', '') +('PCH_PP_CONTROL', '0x00247204', '') +('PCH_PP_ON_DELAYS', '0x00247208', '') +('PCH_PP_OFF_DELAYS', '0x0024720c', '') +('PCH_PP_DIVISOR', '0x00247210', '') +('BLC_PWM_PCH_CTL1', '0x00248250', '') +('BLC_PWM_PCH_CTL2', '0x00248254', '') +('TRANS_HTOTAL_A', '0x00260000', '') +('TRANS_HBLANK_A', '0x00260004', '') +('TRANS_HSYNC_A', '0x00260008', '') +('TRANS_VTOTAL_A', '0x0026000c', '') +('TRANS_VBLANK_A', '0x00260010', '') +('TRANS_VSYNC_A', '0x00260014', '') +('TRANS_VSYNCSHIFT_A', '0x00260028', '') +('TRANSA_DATA_M1', '0x00260030', '') +('TRANSA_DATA_N1', '0x00260034', '') +('TRANSA_DATA_M2', '0x00260038', '') +('TRANSA_DATA_N2', '0x0026003c', '') +('TRANSA_DP_LINK_M1', '0x00260040', '') +('TRANSA_DP_LINK_N1', '0x00260044', '') +('TRANSA_DP_LINK_M2', '0x00260048', '') +('TRANSA_DP_LINK_N2', '0x0026004c', '') +('TRANS_DP_CTL_A', '0x00260300', '') +('TRANS_HTOTAL_B', '0x00261000', '') +('TRANS_HBLANK_B', '0x00261004', '') +('TRANS_HSYNC_B', '0x00261008', '') +('TRANS_VTOTAL_B', '0x0026100c', '') +('TRANS_VBLANK_B', '0x00261010', '') +('TRANS_VSYNC_B', '0x00261014', '') +('TRANS_VSYNCSHIFT_B', '0x00261028', '') +('TRANSB_DATA_M1', '0x00261030', '') +('TRANSB_DATA_N1', '0x00261034', '') +('TRANSB_DATA_M2', '0x00261038', '') +('TRANSB_DATA_N2', '0x0026103c', '') +('TRANSB_DP_LINK_M1', '0x00261040', '') +('TRANSB_DP_LINK_N1', '0x00261044', '') +('TRANSB_DP_LINK_M2', '0x00261048', '') +('TRANSB_DP_LINK_N2', '0x0026104c', '') +('PCH_ADPA', '0x00261100', '') +('HDMIB', '0x00261140', '') +('HDMIC', '0x00261150', '') +('HDMID', '0x00261160', '') +('PCH_LVDS', '0x00261180', '') +('TRANS_DP_CTL_B', '0x00261300', '') +('TRANS_HTOTAL_C', '0x00262000', '') +('TRANS_HBLANK_C', '0x00262004', '') +('TRANS_HSYNC_C', '0x00262008', '') +('TRANS_VTOTAL_C', '0x0026200c', '') +('TRANS_VBLANK_C', '0x00262010', '') +('TRANS_VSYNC_C', '0x00262014', '') +('TRANS_VSYNCSHIFT_C', '0x00262028', '') +('TRANSC_DATA_M1', '0x00262030', '') +('TRANSC_DATA_N1', '0x00262034', '') +('TRANSC_DATA_M2', '0x00262038', '') +('TRANSC_DATA_N2', '0x0026203c', '') +('TRANSC_DP_LINK_M1', '0x00262040', '') +('TRANSC_DP_LINK_N1', '0x00262044', '') +('TRANSC_DP_LINK_M2', '0x00262048', '') +('TRANSC_DP_LINK_N2', '0x0026204c', '') +('TRANS_DP_CTL_C', '0x00262300', '') +('PCH_DP_B', '0x00264100', '') +('PCH_DP_C', '0x00264200', '') +('PCH_DP_D', '0x00264300', '') +('TRANSACONF', '0x00270008', '') +('FDI_RXA_CTL', '0x0027000c', '') +('FDI_RXA_MISC', '0x00270010', '') +('FDI_RXA_IIR', '0x00270014', '') +('FDI_RXA_IMR', '0x00270018', '') +('FDI_RXA_TUSIZE1', '0x00270030', '') +('FDI_RXA_TUSIZE2', '0x00270038', '') +('TRANSBCONF', '0x00271008', '') +('FDI_RXB_CTL', '0x0027100c', '') +('FDI_RXB_MISC', '0x00271010', '') +('FDI_RXB_IIR', '0x00271014', '') +('FDI_RXB_IMR', '0x00271018', '') +('FDI_RXB_TUSIZE1', '0x00271030', '') +('FDI_RXB_TUSIZE2', '0x00271038', '') +('TRANSCCONF', '0x00272008', '') +('FDI_RXC_CTL', '0x0027200c', '') +('FDI_RXC_MISC', '0x00272010', '') +('FDI_RXC_TUSIZE1', '0x00272030', '') +('FDI_RXC_TUSIZE2', '0x00272038', '') +('FDI_PLL_CTL_1', '0x0027e000', '') +('FDI_PLL_CTL_2', '0x0027e004', '') --1.7.12
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
Quoted 12 lines · Ben Widawsky
Quoted 7 lines · Daniel Vetter
And a quick comment on your approach here: I'm not too sure whether the
file-base register block approach scales, respectively why exactly this is
better than frobbing thereg_dumpertool. Since that one has the concept
of register blocks already, too.It doesn't scale. It scales better than
reg_dumperwas my goal and point (IMO).
Quoted 7 lines
The exact problem that was trying to be solved is Valleyview (and I assure you there will be more such products coming). Valleyview took a huge chunk of well known registers, and changed their offsets. Modifying this in reg dumper is of course possible, but it's tedious. I wanted to have easy to modify text files with an easy python front end (the offsets could even be applied in the script extremely easily).
If the issue is just the base-address moving around, I think we could solve that with some refactoring ...
-Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 21 lines · On Wed, 26 Sep 2012 13:51:01 +0200 Daniel Vetter <[email protected]> wrote:
Quoted 12 lines · Ben Widawsky
Quoted 7 lines · Daniel Vetter
And a quick comment on your approach here: I'm not too sure whether the
file-base register block approach scales, respectively why exactly this is
better than frobbing thereg_dumpertool. Since that one has the concept
of register blocks already, too.It doesn't scale. It scales better than
reg_dumperwas my goal and point (IMO).Quoted 7 lines
The exact problem that was trying to be solved is Valleyview (and I assure you there will be more such products coming). Valleyview took a huge chunk of well known registers, and changed their offsets. Modifying this in reg dumper is of course possible, but it's tedious. I wanted to have easy to modify text files with an easy python front end (the offsets could even be applied in the script extremely easily).
Quoted 3 lines
If the issue is just the base-address moving around, I think we could solve that with some refactoring ...
-Daniel
That's exactly an example of the problem it's trying to solve. When working on new platforms (which is happening much more frequently then it used to), we shouldn't have to refactor an existing tool to make it do what we want in preparation for power-on, or even worse, during power-on. I want something quick, and dirty that gets the information I need, and migrate it over time to intel_reg_dumper. Furthermore, doing the range dump can be trivially added with your scripting language of choice.
Almost as important, it takes away from the maintenance burden on a useful tool like reg_dumper for one off platforms like the stupid vlv we are currently working with (ie. things which will never ship).
I'm not sure at this point if you're genuinely opposed, or just looking for holes to poke. Maybe you can clarify, because frankly, I'm using this tool for my own needs, and whether or not I push it is fairly don't care.
Quoted 37 lines · Ben Widawsky
Quoted 21 lines · On Wed, 26 Sep 2012 13:51:01 +0200 Daniel Vetter <[email protected]> wrote:
Quoted 12 lines · Ben Widawsky
Quoted 7 lines · Daniel Vetter
And a quick comment on your approach here: I'm not too sure whether the
file-base register block approach scales, respectively why exactly this is
better than frobbing thereg_dumpertool. Since that one has the concept
of register blocks already, too.It doesn't scale. It scales better than
reg_dumperwas my goal and point (IMO).Quoted 7 lines
The exact problem that was trying to be solved is Valleyview (and I assure you there will be more such products coming). Valleyview took a huge chunk of well known registers, and changed their offsets. Modifying this in reg dumper is of course possible, but it's tedious. I wanted to have easy to modify text files with an easy python front end (the offsets could even be applied in the script extremely easily).
Quoted 3 lines
If the issue is just the base-address moving around, I think we could solve that with some refactoring ...
-DanielThat's exactly an example of the problem it's trying to solve. When working on new platforms (which is happening much more frequently then it used to), we shouldn't have to refactor an existing tool to make it do what we want in preparation for power-on, or even worse, during power-on. I want something quick, and dirty that gets the information I need, and migrate it over time to
intel_reg_dumper. Furthermore, doing the range dump can be trivially added with your scripting language of choice.
Quoted 8 lines
Almost as important, it takes away from the maintenance burden on a useful tool like
reg_dumperfor one off platforms like the stupid vlv we are currently working with (ie. things which will never ship).I'm not sure at this point if you're genuinely opposed, or just looking for holes to poke. Maybe you can clarify, because frankly, I'm using this tool for my own needs, and whether or not I push it is fairly don't care.
Not genuinely opposed, but questioning the usefulness of such a script as a tool to be used for end-users (which most of the i-g-t/tools programs are for). If you want I think it'd make sense to move it to scripts as a noinst_PYTHON thing (we have a few of those already). I'll merge such a patch.
Cheers, Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 51 lines · Daniel Vetter
Quoted 26 lines · Ben Widawsky
intel_reg_dumperis cool. However, doing bit decoding and dealing with moving registers from generation to generation (and in some cases just steppings) becomes a bit of a burden over time. It's also not completely necessary when doing the not-so-uncommon diff against some other BIOS debug.While I do not want this tool to replace
intel_reg_dumper, I think it has it's uses. The target is particularly for power-on like situations where we want to easily add profiles with new registers, and not lose the old information. Doing this in the existing reg dumper can be a bit tedious and sometimes error prone. It also is a nice place to add registers which may or may not actually be useful. Ones which prove useful over time should get moved to reg dumper.The tool provides a fast way to add new registers, and register profiles as we bring up new platforms, or try to share debug information. This is accomplished by defining python tuples in text files, and adding them to profiles, which are just a list of the files containing tuples.
I defined a few "base" files which is essentially the previous
reg_dumperregisters + some other interesting ones. These are automatically used unless the user supplies the "baseless" option. The base should be pretty decent for all recent generation chips with the exception of valleyview. On top of this, I provided some starter
profiles: ivybridge, sandybridge, and valleyview.Quoted 6 lines
NOTE: the valleyview profile is currently a work in progress.
So to get a quick sandybridge dump for instance:
sudo ./quick_dump.py sandybridgeFeedback please.
I've wasted a few brain-cycles on the dump problem recently, too - pimping
intel_reg_dumperis rather obviously a pain. Two ideas:- create a script that slurps in internal Bspec xml. The issue here is that I don't know how to handle regs with read-sideeffects (yep, we have those). Maybe manual blacklist. The upside is that this would hopefully allow auto-decoding of the bitfields (if we pimp the xml slurper sufficiently). Also, if we can get at the xml for the open-source Bspec, we could use this tool to auto-create a per-gen open-source reg slurper. Generally I fear that this approach is too messy and noisy and hence
intel_reg_dumperpimping probably better.- Another idea is to just dump entire register blocks for functional units with a header per block (e.g. "
PLANE_A") and then offset : value hexvalue paris per line. That might be useful for quick&dirty comparison for bringup.
Quoted 6 lines
And a quick comment on your approach here: I'm not too sure whether the file-base register block approach scales, respectively why exactly this is better than frobbing the
reg_dumpertool. Since that one has the concept of register blocks already, too.Cheers, Daniel
The current plan I believe was to rebase this, test it, update for VLV and push. Any complaints?