regulator: tps80031: Implement list_voltage and set n_voltages = 1 for fixed regulators

PATCH Applied Axel Lin 3 participants 3 messages Nov 23, 2012 Voltage and current regulator framework

lore

Share & tools

lore

Axel Lin

author

2012-11-23 01:26 UTC #0 lore raw

PATCH 1/1 regulator: tps80031: Implement list_voltage and set n_voltages = 1 for fixed regulators

Implement list_voltage for fixed regulators, otherwise regulator_is_supported_voltage() returns 0.

Signed-off-by Axel Lin <[email protected]>

---
 drivers/regulator/tps80031-regulator.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

drivers/regulator/tps80031-regulator.c +5 -1

index 6d5f203..50f89b0 100644
@@ -407,15 +407,18 @@ static struct regulator_ops tps80031_ldo_ops = {
 };
 
 static struct regulator_ops tps80031_vbus_sw_ops = {
+	.list_voltage	= regulator_list_voltage_linear,
 	.enable		= tps80031_vbus_enable,
 	.disable	= tps80031_vbus_disable,
 	.is_enabled	= tps80031_vbus_is_enabled,
 };
 
 static struct regulator_ops tps80031_vbus_hw_ops = {
+	.list_voltage	= regulator_list_voltage_linear,
 };
 
 static struct regulator_ops tps80031_ext_reg_ops = {
+	.list_voltage	= regulator_list_voltage_linear,
 	.enable		= tps80031_reg_enable,
 	.disable	= tps80031_reg_disable,
 	.is_enabled	= tps80031_reg_is_enabled,

@@ -477,7 +480,8 @@ static struct regulator_ops tps80031_ext_reg_ops = {
 	.desc = {						\
 		.name = "tps80031_"#_id,			\
 		.id = TPS80031_REGULATOR_##_id,			\
-		.n_voltages = 2,				\
+		.min_uV = max_mV * 1000,			\
+		.n_voltages = 1,				\
 		.ops = &_ops,					\
 		.type = REGULATOR_VOLTAGE,			\
 		.owner = THIS_MODULE,				\

Signature · 1 line