Skip to contentSkip to conversation

ASoC: wm8993: Refactor set_pll code to avoid GCC warnings

PATCH Superseded Fabio Estevam 2 participants 2 messages Dec 12, 2012

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: wm8993: Refactor set_pll code to avoid GCC warnings

From: Fabio Estevam <[email protected]>

Refactor set_pll code to avoid the following warnings:

sound/soc/codecs/wm8983.c:873:40: warning: 'pll_div.k' may be used uninitialized in this function [-Wuninitialized] sound/soc/codecs/wm8983.c:870:9: warning: 'pll_div.n' may be used uninitialized in this function [-Wuninitialized] sound/soc/codecs/wm8983.c:869:23: warning: 'pll_div.div2' may be used uninitialized in this function [-Wuninitialized]

Do the same as in commit 86ce6c9a (ASoC: WM8804: Refactor set_pll code to avoid GCC warnings).

---
 sound/soc/codecs/wm8983.c |   41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)
sound/soc/codecs/wm8983.c +22 -19
index 9fe1e04..e7c73ff 100644
@@ -851,30 +851,33 @@ static int wm8983_set_pll(struct snd_soc_dai *dai, int pll_id,
 	struct pll_div pll_div;
 
 	codec = dai->codec;
-	if (freq_in && freq_out) {
+	if (!freq_in || !freq_out) {
+		/* disable the PLL before re-programming it */
+		snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_PLLEN_MASK, 0);
+		return 0;
+	} else {
 		ret = pll_factors(&pll_div, freq_out * 4 * 2, freq_in);
 		if (ret)
 			return ret;
-	}
-
-	/* disable the PLL before re-programming it */
-	snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
-			    WM8983_PLLEN_MASK, 0);
 
-	if (!freq_in || !freq_out)
-		return 0;
+		/* disable the PLL before re-programming it */
+		snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_PLLEN_MASK, 0);
+
+		/* set PLLN and PRESCALE */
+		snd_soc_write(codec, WM8983_PLL_N,
+		      	(pll_div.div2 << WM8983_PLL_PRESCALE_SHIFT)
+			| pll_div.n);
+		/* set PLLK */
+		snd_soc_write(codec, WM8983_PLL_K_3, pll_div.k & 0x1ff);
+		snd_soc_write(codec, WM8983_PLL_K_2, (pll_div.k >> 9) & 0x1ff);
+		snd_soc_write(codec, WM8983_PLL_K_1, (pll_div.k >> 18));
+		/* enable the PLL */
+		snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
+			    		WM8983_PLLEN_MASK, WM8983_PLLEN);
+	}
 
-	/* set PLLN and PRESCALE */
-	snd_soc_write(codec, WM8983_PLL_N,
-		      (pll_div.div2 << WM8983_PLL_PRESCALE_SHIFT)
-		      | pll_div.n);
-	/* set PLLK */
-	snd_soc_write(codec, WM8983_PLL_K_3, pll_div.k & 0x1ff);
-	snd_soc_write(codec, WM8983_PLL_K_2, (pll_div.k >> 9) & 0x1ff);
-	snd_soc_write(codec, WM8983_PLL_K_1, (pll_div.k >> 18));
-	/* enable the PLL */
-	snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
-			    WM8983_PLLEN_MASK, WM8983_PLLEN);
 	return 0;
 }
 
Signature · 1 line
1.7.9.5
#1 lore raw

sound/soc/codecs/wm8983.c static int wm8983_set_pll(struct snd_soc_dai *dai, int pll_id, · line 858

Quoted 6 lines · Fabio Estevam
sound/soc/codecs/wm8983.c +5 -1
-	if (freq_in && freq_out) {
+	if (!freq_in || !freq_out) {
+		/* disable the PLL before re-programming it */
+		snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_PLLEN_MASK, 0);
+		return 0;

This comment clearly doesn't match the code.