Skip to contentSkip to conversation

Update the netcat with debian patches to fix some error

PATCH In review [email protected] 3 participants 5 messages Jan 5, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Update the netcat with debian patches to fix some error

From: Lei Yang <[email protected]>

I know we have the patches in debian dir in the previous version, but I meet lots of patch error.so I change it to debian.org version

The background I do this change is:
I'm a kvm tester,without patches it will meet error when I do the migrate testing with -incoming "exec:nc -l 5200" it meets error:
"nc: Protocol no available."

You can reproduce it simplely with "nc -l 5200" on your board

Lei

---
 recipes-extended/libvirt/libvirt_1.0.0.bb          |    2 +-
 .../netcat-openbsd/netcat-openbsd_1.89-4.patch     | 2793 ++++++++++++++++++++
 recipes-networking/netcat/netcat-openbsd_1.89.bb   |   32 +
 recipes-networking/netcat/openbsd-netcat_1.6.bb    |   29 -
 4 files changed, 2826 insertions(+), 30 deletions(-)
 create mode 100644 recipes-networking/netcat/netcat-openbsd/netcat-openbsd_1.89-4.patch
 create mode 100644 recipes-networking/netcat/netcat-openbsd_1.89.bb
 delete mode 100644 recipes-networking/netcat/openbsd-netcat_1.6.bb
recipes-extended/libvirt/libvirt_1.0.0.bb +1 -1
index 5374237..90d7dbb 100644
@@ -11,7 +11,7 @@ DEPENDS = "bridge-utils gnutls libxml2 lvm2 avahi parted curl libpcap util-linux
 # These might be included by PACKAGECONFIG
 #RRECOMMENDS+= "polkit qemu yajl libnl lxc netcf"
 
-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq openbsd-netcat"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
 RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode"
 RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"
 
recipes-networking/netcat/netcat-openbsd/netcat-openbsd_1.89-4.patch new file +2793 -0

2,793 lines not on this page · raw message

recipes-networking/netcat/netcat-openbsd_1.89.bb new file +32 -0
new file mode 100644
index 0000000..392a3fd
@@ -0,0 +1,32 @@
+DESCRIPTION = "OpenBSD Netcat"
+HOMEPAGE = "http://ftp.debian.org"
+SECTION = "console/network"
+LICENSE = "BSD-3-Clause"
+PR = "r0"
+
+SRC_URI = "http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89.orig.tar.gz \
+           file://netcat-openbsd_1.89-4.patch"
+SRC_URI[md5sum] = "7238ce15aae43069e96ba7faf03f153e"
+SRC_URI[sha256sum] = "72e844dde8a2a7cba61971d493758dbea9ef0b164bccef15fd4a36490dc77f2b"
+
+S = "${WORKDIR}/${PN}-${PV}.orig"
+inherit update-alternatives gettext
+
+do_configure[noexec] = "1"
+
+do_compile() {
+	cd ${S}
+	while read line; do patch -p1 <debian/patches/$line; done <debian/patches/series
+	pkgrel=4
+	oe_runmake CFLAGS="$CFLAGS -DDEBIAN_VERSION=\"\\\"${pkgrel}\\\"\""
+}
+
+do_install() {
+	install -d ${D}${bindir}
+	install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
+}
+
+ALTERNATIVE_${PN} = "nc"
+ALTERNATIVE_PRIORITY = "101"
+
+BBCLASSEXTEND = "nativesdk"
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -29
deleted file mode 100644
index 1ae3f37..0000000
@@ -1,29 +0,0 @@
-DESCRIPTION = "OpenBSD Netcat"
-HOMEPAGE = "http://code.google.com/p/openbsd-netcat/"
-SECTION = "console/network"
-LICENSE = "BSD-3-Clause"
-PR = "r0"
-
-SRCREV = "5"
-
-SRC_URI = "svn://openbsd-netcat.googlecode.com/svn;module=trunk;protocol=http"
-S = "${WORKDIR}/trunk"
-
-inherit update-alternatives gettext
-
-do_configure[noexec] = "1"
-
-do_compile() {
-	cd ${S}
-	oe_runmake
-}
-
-do_install() {
-	install -d ${D}${bindir}
-	install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
-}
-
-ALTERNATIVE_${PN} = "nc"
-ALTERNATIVE_PRIORITY = "101"
-
-BBCLASSEXTEND = "nativesdk"
Signature · 1 line
1.7.1
#1 lore raw
Quoted 11 lines · On 01/05/2013 09:45 AM, [email protected] wrote:

From: Lei Yang <[email protected]>

I know we have the patches in debian dir in the previous version, but I meet lots of patch error.so I change it to debian.org version

The background I do this change is:
I'm a kvm tester,without patches it will meet error when I do the migrate testing with -incoming "exec:nc -l 5200" it meets error:
"nc: Protocol no available."

You can reproduce it simplely with "nc -l 5200" on your board

Hi Lei,

Thanks for the patch, your .patch file needs an upstream status, if its to be kept in the meta-virt layer.

please see:
https://wiki.yoctoproject.org/wiki/Best_Known_Methods_(BKMs)_for_Package_Updating#Patch_Upstreaming

Quoted 27 lines

Lei

---
  recipes-extended/libvirt/libvirt_1.0.0.bb          |    2 +-
  .../netcat-openbsd/netcat-openbsd_1.89-4.patch     | 2793 ++++++++++++++++++++
  recipes-networking/netcat/netcat-openbsd_1.89.bb   |   32 +
  recipes-networking/netcat/openbsd-netcat_1.6.bb    |   29 -
  4 files changed, 2826 insertions(+), 30 deletions(-)

create mode 100644 recipes-networking/netcat/netcat-openbsd/netcat-openbsd_1.89-4.patch create mode 100644 recipes-networking/netcat/netcat-openbsd_1.89.bb delete mode 100644 recipes-networking/netcat/openbsd-netcat_1.6.bb

recipes-extended/libvirt/libvirt_1.0.0.bb +1 -1
index 5374237..90d7dbb 100644
@@ -11,7 +11,7 @@ DEPENDS = "bridge-utils gnutls libxml2 lvm2 avahi parted curl libpcap util-linux
  # These might be included by PACKAGECONFIG
  #RRECOMMENDS+= "polkit qemu yajl libnl lxc netcf"
 
-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq openbsd-netcat"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
  RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode"
  RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"
 

[snip]

Quoted 6 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +0 -0
new file mode 100644
index 0000000..392a3fd

recipes-networking/netcat/netcat-openbsd_1.89.bb line 8

Quoted 8 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +8 -0
@@ -0,0 +1,32 @@
+DESCRIPTION = "OpenBSD Netcat"
+HOMEPAGE = "http://ftp.debian.org"
+SECTION = "console/network"
+LICENSE = "BSD-3-Clause"
+PR = "r0"
+
+SRC_URI = "http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89.orig.tar.gz \
+           file://netcat-openbsd_1.89-4.patch"

Hmm,
I suspect there is no difference between above .patch file and upstream:
http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz

Please reference the patch from this location to keep code size in meta-virt low.

Quoted 60 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +24 -0
+SRC_URI[md5sum] = "7238ce15aae43069e96ba7faf03f153e"
+SRC_URI[sha256sum] = "72e844dde8a2a7cba61971d493758dbea9ef0b164bccef15fd4a36490dc77f2b"
+
+S = "${WORKDIR}/${PN}-${PV}.orig"
+inherit update-alternatives gettext
+
+do_configure[noexec] = "1"
+
+do_compile() {
+	cd ${S}
+	while read line; do patch -p1 <debian/patches/$line; done <debian/patches/series
+	pkgrel=4
+	oe_runmake CFLAGS="$CFLAGS -DDEBIAN_VERSION=\"\\\"${pkgrel}\\\"\""
+}
+
+do_install() {
+	install -d ${D}${bindir}
+	install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
+}
+
+ALTERNATIVE_${PN} = "nc"
+ALTERNATIVE_PRIORITY = "101"
+
+BBCLASSEXTEND = "nativesdk"
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -29
deleted file mode 100644
index 1ae3f37..0000000
@@ -1,29 +0,0 @@
-DESCRIPTION = "OpenBSD Netcat"
-HOMEPAGE = "http://code.google.com/p/openbsd-netcat/"
-SECTION = "console/network"
-LICENSE = "BSD-3-Clause"
-PR = "r0"
-
-SRCREV = "5"
-
-SRC_URI = "svn://openbsd-netcat.googlecode.com/svn;module=trunk;protocol=http"
-S = "${WORKDIR}/trunk"
-
-inherit update-alternatives gettext
-
-do_configure[noexec] = "1"
-
-do_compile() {
-	cd ${S}
-	oe_runmake
-}
-
-do_install() {
-	install -d ${D}${bindir}
-	install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
-}
-
-ALTERNATIVE_${PN} = "nc"
-ALTERNATIVE_PRIORITY = "101"
-
-BBCLASSEXTEND = "nativesdk"
#2 lore raw
Quoted 85 lines · David Nyström
Quoted 6 lines · On 01/05/2013 09:45 AM, [email protected] wrote:

From: Lei Yang <[email protected]>

I know we have the patches in debian dir in the previous version, but I meet lots of patch error.so I change it to debian.org version

Quoted 6 lines

The background I do this change is:
I'm a kvm tester,without patches it will meet error when I do the migrate testing with -incoming "exec:nc -l 5200" it meets error:
"nc: Protocol no available."

You can reproduce it simplely with "nc -l 5200" on your board

Hi Lei,

Thanks for the patch, your .patch file needs an upstream status, if its to be kept in the meta-virt layer.

please see:
https://wiki.yoctoproject.org/wiki/Best_Known_Methods_(BKMs)_for_Package_Updating#Patch_Upstreaming

Quoted 33 lines

Lei

---
  recipes-extended/libvirt/libvirt_1.0.0.bb          |    2 +-
  .../netcat-openbsd/netcat-openbsd_1.89-4.patch     | 2793
++++++++++++++++++++
  recipes-networking/netcat/netcat-openbsd_1.89.bb   |   32 +
  recipes-networking/netcat/openbsd-netcat_1.6.bb    |   29 -
  4 files changed, 2826 insertions(+), 30 deletions(-)

create mode 100644
recipes-networking/netcat/netcat-openbsd/netcat-openbsd_1.89-4.patch
create mode 100644 recipes-networking/netcat/netcat-openbsd_1.89.bb delete mode 100644 recipes-networking/netcat/openbsd-netcat_1.6.bb

recipes-extended/libvirt/libvirt_1.0.0.bb +0 -0
index 5374237..90d7dbb 100644
@@ -11,7 +11,7 @@ DEPENDS = "bridge-utils gnutls libxml2 lvm2 avahi parted

curl libpcap util-linux
# These might be included by PACKAGECONFIG #RRECOMMENDS+= "polkit qemu yajl libnl lxc netcf"

-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq openbsd-netcat"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode" RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"

[snip]

Quoted 14 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +7 -0
new file mode 100644
index 0000000..392a3fd
@@ -0,0 +1,32 @@
+DESCRIPTION = "OpenBSD Netcat"
+HOMEPAGE = "http://ftp.debian.org"
+SECTION = "console/network"
+LICENSE = "BSD-3-Clause"
+PR = "r0"
+
+SRC_URI =
Quoted 3 lines

"http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89.orig.tar.gz \
+ file://netcat-openbsd_1.89-4.patch"

Hmm,
I suspect there is no difference between above .patch file and upstream:
http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz

Quoted 3 lines

Please reference the patch from this location to keep code size in meta-virt low.

Yes, the patch comes from
http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz
I don't know how to put two http location in one bb

and How could I fill the upstream s

Quoted 70 lines
Quoted 55 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +2 -0
+SRC_URI[md5sum] = "7238ce15aae43069e96ba7faf03f153e"
+SRC_URI[sha256sum] =

"72e844dde8a2a7cba61971d493758dbea9ef0b164bccef15fd4a36490dc77f2b"

recipes-networking/netcat/netcat-openbsd_1.89.bb new file +9 -0
+
+S = "${WORKDIR}/${PN}-${PV}.orig"
+inherit update-alternatives gettext
+
+do_configure[noexec] = "1"
+
+do_compile() {
+       cd ${S}
+       while read line; do patch -p1 <debian/patches/$line; done

<debian/patches/series

recipes-networking/netcat/netcat-openbsd_1.89.bb new file +13 -0
+       pkgrel=4
+       oe_runmake CFLAGS="$CFLAGS -DDEBIAN_VERSION=\"\\\"${pkgrel}\\\"\""
+}
+
+do_install() {
+       install -d ${D}${bindir}
+       install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
+}
+
+ALTERNATIVE_${PN} = "nc"
+ALTERNATIVE_PRIORITY = "101"
+
+BBCLASSEXTEND = "nativesdk"
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -9
deleted file mode 100644
index 1ae3f37..0000000
@@ -1,29 +0,0 @@
-DESCRIPTION = "OpenBSD Netcat"
-HOMEPAGE = "http://code.google.com/p/openbsd-netcat/"
-SECTION = "console/network"
-LICENSE = "BSD-3-Clause"
-PR = "r0"
-
-SRCREV = "5"
-
-SRC_URI =

"svn://openbsd-netcat.googlecode.com/svn;module=trunk;protocol=http"

recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -10
-S = "${WORKDIR}/trunk"
-
-inherit update-alternatives gettext
-
-do_configure[noexec] = "1"
-
-do_compile() {
-       cd ${S}
-       oe_runmake
-}

recipes-networking/netcat/openbsd-netcat_1.6.bb line 29

Quoted 10 lines
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -10
-
-do_install() {
-       install -d ${D}${bindir}
-       install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
-}
-
-ALTERNATIVE_${PN} = "nc"
-ALTERNATIVE_PRIORITY = "101"
-
-BBCLASSEXTEND = "nativesdk"

_______________________________________________
meta-virtualization mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-virtualization

#3 lore raw
In reply to David Nyström
Quoted 85 lines · David Nyström
Quoted 6 lines · On 01/05/2013 09:45 AM, [email protected] wrote:

From: Lei Yang <[email protected]>

I know we have the patches in debian dir in the previous version, but I meet lots of patch error.so I change it to debian.org version

Quoted 6 lines

The background I do this change is:
I'm a kvm tester,without patches it will meet error when I do the migrate testing with -incoming "exec:nc -l 5200" it meets error:
"nc: Protocol no available."

You can reproduce it simplely with "nc -l 5200" on your board

Hi Lei,

Thanks for the patch, your .patch file needs an upstream status, if its to be kept in the meta-virt layer.

please see:
https://wiki.yoctoproject.org/wiki/Best_Known_Methods_(BKMs)_for_Package_Updating#Patch_Upstreaming

Quoted 33 lines

Lei

---
  recipes-extended/libvirt/libvirt_1.0.0.bb          |    2 +-
  .../netcat-openbsd/netcat-openbsd_1.89-4.patch     | 2793
++++++++++++++++++++
  recipes-networking/netcat/netcat-openbsd_1.89.bb   |   32 +
  recipes-networking/netcat/openbsd-netcat_1.6.bb    |   29 -
  4 files changed, 2826 insertions(+), 30 deletions(-)

create mode 100644
recipes-networking/netcat/netcat-openbsd/netcat-openbsd_1.89-4.patch
create mode 100644 recipes-networking/netcat/netcat-openbsd_1.89.bb delete mode 100644 recipes-networking/netcat/openbsd-netcat_1.6.bb

recipes-extended/libvirt/libvirt_1.0.0.bb +0 -0
index 5374237..90d7dbb 100644
@@ -11,7 +11,7 @@ DEPENDS = "bridge-utils gnutls libxml2 lvm2 avahi parted

curl libpcap util-linux
# These might be included by PACKAGECONFIG #RRECOMMENDS+= "polkit qemu yajl libnl lxc netcf"

-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq openbsd-netcat"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode" RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"

[snip]

Quoted 14 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +7 -0
new file mode 100644
index 0000000..392a3fd
@@ -0,0 +1,32 @@
+DESCRIPTION = "OpenBSD Netcat"
+HOMEPAGE = "http://ftp.debian.org"
+SECTION = "console/network"
+LICENSE = "BSD-3-Clause"
+PR = "r0"
+
+SRC_URI =
Quoted 3 lines

"http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89.orig.tar.gz \
+ file://netcat-openbsd_1.89-4.patch"

Hmm,
I suspect there is no difference between above .patch file and upstream:
http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz

Quoted 3 lines

Please reference the patch from this location to keep code size in meta-virt low.

Yes, the patch comes from
http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz
I don't know how to put two http location in one bb, do you have an examle? or use wget in bb? seems not

and How could I fill the upstream status, should be pending? since it's not in openbsd-netcat.googlecode.com now

Lei

Quoted 70 lines
Quoted 55 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +2 -0
+SRC_URI[md5sum] = "7238ce15aae43069e96ba7faf03f153e"
+SRC_URI[sha256sum] =

"72e844dde8a2a7cba61971d493758dbea9ef0b164bccef15fd4a36490dc77f2b"

recipes-networking/netcat/netcat-openbsd_1.89.bb new file +9 -0
+
+S = "${WORKDIR}/${PN}-${PV}.orig"
+inherit update-alternatives gettext
+
+do_configure[noexec] = "1"
+
+do_compile() {
+       cd ${S}
+       while read line; do patch -p1 <debian/patches/$line; done

<debian/patches/series

recipes-networking/netcat/netcat-openbsd_1.89.bb new file +13 -0
+       pkgrel=4
+       oe_runmake CFLAGS="$CFLAGS -DDEBIAN_VERSION=\"\\\"${pkgrel}\\\"\""
+}
+
+do_install() {
+       install -d ${D}${bindir}
+       install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
+}
+
+ALTERNATIVE_${PN} = "nc"
+ALTERNATIVE_PRIORITY = "101"
+
+BBCLASSEXTEND = "nativesdk"
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -9
deleted file mode 100644
index 1ae3f37..0000000
@@ -1,29 +0,0 @@
-DESCRIPTION = "OpenBSD Netcat"
-HOMEPAGE = "http://code.google.com/p/openbsd-netcat/"
-SECTION = "console/network"
-LICENSE = "BSD-3-Clause"
-PR = "r0"
-
-SRCREV = "5"
-
-SRC_URI =

"svn://openbsd-netcat.googlecode.com/svn;module=trunk;protocol=http"

recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -10
-S = "${WORKDIR}/trunk"
-
-inherit update-alternatives gettext
-
-do_configure[noexec] = "1"
-
-do_compile() {
-       cd ${S}
-       oe_runmake
-}

recipes-networking/netcat/openbsd-netcat_1.6.bb line 29

Quoted 10 lines
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -10
-
-do_install() {
-       install -d ${D}${bindir}
-       install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
-}
-
-ALTERNATIVE_${PN} = "nc"
-ALTERNATIVE_PRIORITY = "101"
-
-BBCLASSEXTEND = "nativesdk"

_______________________________________________
meta-virtualization mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-virtualization

#4 lore raw
Quoted 91 lines · lei yang
Quoted 85 lines · David Nyström
Quoted 6 lines · On 01/05/2013 09:45 AM, [email protected] wrote:

From: Lei Yang <[email protected]>

I know we have the patches in debian dir in the previous version, but I meet lots of patch error.so I change it to debian.org version

Quoted 6 lines

The background I do this change is:
I'm a kvm tester,without patches it will meet error when I do the migrate testing with -incoming "exec:nc -l 5200" it meets error:
"nc: Protocol no available."

You can reproduce it simplely with "nc -l 5200" on your board

Hi Lei,

Thanks for the patch, your .patch file needs an upstream status, if its to be kept in the meta-virt layer.

please see:
https://wiki.yoctoproject.org/wiki/Best_Known_Methods_(BKMs)_for_Package_Updating#Patch_Upstreaming

Quoted 33 lines

Lei

---
  recipes-extended/libvirt/libvirt_1.0.0.bb          |    2 +-
  .../netcat-openbsd/netcat-openbsd_1.89-4.patch     | 2793
++++++++++++++++++++
  recipes-networking/netcat/netcat-openbsd_1.89.bb   |   32 +
  recipes-networking/netcat/openbsd-netcat_1.6.bb    |   29 -
  4 files changed, 2826 insertions(+), 30 deletions(-)

create mode 100644
recipes-networking/netcat/netcat-openbsd/netcat-openbsd_1.89-4.patch
create mode 100644 recipes-networking/netcat/netcat-openbsd_1.89.bb delete mode 100644 recipes-networking/netcat/openbsd-netcat_1.6.bb

recipes-extended/libvirt/libvirt_1.0.0.bb +0 -0
index 5374237..90d7dbb 100644
@@ -11,7 +11,7 @@ DEPENDS = "bridge-utils gnutls libxml2 lvm2 avahi parted

curl libpcap util-linux
# These might be included by PACKAGECONFIG #RRECOMMENDS+= "polkit qemu yajl libnl lxc netcf"

-RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq openbsd-netcat"
+RDEPENDS_libvirt-libvirtd += "bridge-utils iptables pm-utils dnsmasq netcat-openbsd"
RDEPENDS_libvirt-libvirtd_append_x86-64 = " dmidecode" RDEPENDS_libvirt-libvirtd_append_x86 = " dmidecode"

[snip]

Quoted 14 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +7 -0
new file mode 100644
index 0000000..392a3fd
@@ -0,0 +1,32 @@
+DESCRIPTION = "OpenBSD Netcat"
+HOMEPAGE = "http://ftp.debian.org"
+SECTION = "console/network"
+LICENSE = "BSD-3-Clause"
+PR = "r0"
+
+SRC_URI =
Quoted 3 lines

"http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89.orig.tar.gz \
+ file://netcat-openbsd_1.89-4.patch"

Hmm,
I suspect there is no difference between above .patch file and upstream:
http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz

Quoted 3 lines

Please reference the patch from this location to keep code size in meta-virt low.

Quoted 9 lines

Yes, the patch comes from
http://ftp.debian.org/debian/pool/main/n/netcat-openbsd/netcat-openbsd_1.89-4.diff.gz
I don't know how to put two http location in one bb, do you have an examle? or use wget in bb? seems not

and How could I fill the upstream status, should be pending? since it's not in openbsd-netcat.googlecode.com now

Aha, find the example meta/recipes-devtools/squashfs-tools/squashfs-tools_4.2.bb

I will send the patches later

Quoted 74 lines

Lei

Quoted 70 lines
Quoted 55 lines
recipes-networking/netcat/netcat-openbsd_1.89.bb new file +2 -0
+SRC_URI[md5sum] = "7238ce15aae43069e96ba7faf03f153e"
+SRC_URI[sha256sum] =

"72e844dde8a2a7cba61971d493758dbea9ef0b164bccef15fd4a36490dc77f2b"

recipes-networking/netcat/netcat-openbsd_1.89.bb new file +9 -0
+
+S = "${WORKDIR}/${PN}-${PV}.orig"
+inherit update-alternatives gettext
+
+do_configure[noexec] = "1"
+
+do_compile() {
+       cd ${S}
+       while read line; do patch -p1 <debian/patches/$line; done

<debian/patches/series

recipes-networking/netcat/netcat-openbsd_1.89.bb new file +13 -0
+       pkgrel=4
+       oe_runmake CFLAGS="$CFLAGS -DDEBIAN_VERSION=\"\\\"${pkgrel}\\\"\""
+}
+
+do_install() {
+       install -d ${D}${bindir}
+       install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
+}
+
+ALTERNATIVE_${PN} = "nc"
+ALTERNATIVE_PRIORITY = "101"
+
+BBCLASSEXTEND = "nativesdk"
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -9
deleted file mode 100644
index 1ae3f37..0000000
@@ -1,29 +0,0 @@
-DESCRIPTION = "OpenBSD Netcat"
-HOMEPAGE = "http://code.google.com/p/openbsd-netcat/"
-SECTION = "console/network"
-LICENSE = "BSD-3-Clause"
-PR = "r0"
-
-SRCREV = "5"
-
-SRC_URI =

"svn://openbsd-netcat.googlecode.com/svn;module=trunk;protocol=http"

recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -10
-S = "${WORKDIR}/trunk"
-
-inherit update-alternatives gettext
-
-do_configure[noexec] = "1"
-
-do_compile() {
-       cd ${S}
-       oe_runmake
-}

recipes-networking/netcat/openbsd-netcat_1.6.bb line 29

Quoted 10 lines
recipes-networking/netcat/openbsd-netcat_1.6.bb deleted +0 -10
-
-do_install() {
-       install -d ${D}${bindir}
-       install -m 755 ${S}/nc ${D}${bindir}/nc.${BPN}
-}
-
-ALTERNATIVE_${PN} = "nc"
-ALTERNATIVE_PRIORITY = "101"
-
-BBCLASSEXTEND = "nativesdk"

_______________________________________________
meta-virtualization mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-virtualization